Yuanrong Zhu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yuanrong Zhu has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
Juan Jiang
12 shared publicationsXiaojie Bing
12 shared publications- Zhongqi He
USDA‐ARS Southern Regional Research Center New Orleans Louisiana USA
11 shared publications John P. Giesy
State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China
7 shared publicationsYuyao Wang
6 shared publicationsFangxi Cui
5 shared publications
Latest Publications
- Open Access
Life-Cycle Cost and Greenhouse Gas Trade-Offs of Phosphorus-Removal Upgrading Pathways for China’s Municipal Wastewater Treatment Plants
China’s municipal wastewater treatment plants (WWTPs) increasingly require phosphorus-removal upgrading to meet the Class IA standard, creating trade-offs among chemical use, energy demand, cost, and greenhouse gas (GHG) emissions. This study compared six upgrading pathways for a 10,000 m3/d anaerobic–anoxic–oxic (AAO) WWTP by integrating GPS-X simulation, a life cycle assessment, process-based GHG accounting, and life-cycle costing. All pathways achieved the Class IA total phosphorus target but differed in polyaluminum chloride (PAC) demand, electricity consumption, and sludge production. Process-based GHG emissions ranged from 0.424 to 0.580 kg CO2-eq/m3, while discounted life-cycle costs ranged from 0.324 to 0.375 RMB/m3. P4, combining AAO with sand filtration (SF) and PAC dosing at the secondary clarifier, achieved the lowest cost, whereas P6, combining AAO, high-efficiency sedimentation (HES), and SF, exhibited the lowest GHG intensity. Optimizing the PAC dosing location reduced the chemical demand and associated burdens without additional infrastructure. At the national scale, Scenario 1 achieved both a GHG reduction and net cost savings, whereas Scenario 3 delivered the largest GHG reduction at the highest additional net cost. Sensitivity and uncertainty analyses supported the main cost–carbon trade-off while revealing uncertainty in the economic ranking of closely performing pathways. These findings support integrated environmental and economic decision-making for phosphorus-removal upgrading.
Open AccessLife-Cycle Cost and Greenhouse Gas Trade-Offs of Phosphorus-Removal Upgrading Pathways for China’s Municipal Wastewater Treatment Plants
China’s municipal wastewater treatment plants (WWTPs) increasingly require phosphorus-removal upgrading to meet the Class IA standard, creating trade-offs among chemical use, energy demand, cost, and greenhouse gas (GHG) emissions. This study compared six upgrading pathways for a 10,000 m3/d anaerobic–anoxic–oxic (AAO) WWTP by integrating GPS-X simulation, a life cycle assessment, process-based GHG accounting, and life-cycle costing. All pathways achieved the Class IA total phosphorus target but differed in polyaluminum chloride (PAC) demand, electricity consumption, and sludge production. Process-based GHG emissions ranged from 0.424 to 0.580 kg CO2-eq/m3, while discounted life-cycle costs ranged from 0.324 to 0.375 RMB/m3. P4, combining AAO with sand filtration (SF) and PAC dosing at the secondary clarifier, achieved the lowest cost, whereas P6, combining AAO, high-efficiency sedimentation (HES), and SF, exhibited the lowest GHG intensity. Optimizing the PAC dosing location reduced the chemical demand and associated burdens without additional infrastructure. At the national scale, Scenario 1 achieved both a GHG reduction and net cost savings, whereas Scenario 3 delivered the largest GHG reduction at the highest additional net cost. Sensitivity and uncertainty analyses supported the main cost–carbon trade-off while revealing uncertainty in the economic ranking of closely performing pathways. These findings support integrated environmental and economic decision-making for phosphorus-removal upgrading.
- Open Access
- 3 September 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (40) , 45774-45787
Interactions between sulfonamide antibiotics and metal ions: does toxicity increase or decrease?
With the increasing occurrence of multiple pollutants in aquatic environments, interactions among coexisting contaminants and their combined environmental effects have attracted considerable attention.
- 3 September 2026
- Published by Royal Society of Chemistry (RSC) in RSC Advances
- Vol. 16 (40) , 45774-45787
Open AccessInteractions between sulfonamide antibiotics and metal ions: does toxicity increase or decrease?
With the increasing occurrence of multiple pollutants in aquatic environments, interactions among coexisting contaminants and their combined environmental effects have attracted considerable attention.
- Open Access
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Complexation of sulfonamide antibiotics with metal ions: Does Toxicity Increase or Decrease?
With the increasing detection of diverse pollutants in aquatic environments and their accumulation in rivers and lakes, interactions among coexisting contaminants and their combined pollution effects have attracted growing attention. Among these, the coexistence of antibiotics and metal ions has become widespread; however, studies on the photochemical properties and biological toxicity of their complexes remain limited. This study examined changes in spectroscopic characteristics, chemical structures, and toxicity before and after complexation using two representative sulfonamide antibiotics, sulfadiazine (SDZ) and sulfamethoxazole (SMX), and three commonly occurring metal ions (Fe(III), Al(III), and Cu(II)). Toxicity was further assessed using the Vibrio fischeri assay. The spectroscopic results confirmed the occurrence of coordination between sulfonamides and metal ions. The coordination sites of SDZ were located at the nitrogen atom of the pyrimidine ring, whereas those of SMX involved the sulfonamide nitrogen and sulfonyl oxygen atoms. SDZ exhibited a higher tendency for complexation under acidic conditions, while SMX favored neutral conditions. The coordination ability of the three metal ions followed the order Fe(III) > Cu(II) > Al(III).Coordination process likely promoted the formation of luminescent chelates, increased molecular rigidity and enhanced fluorescence intensity. Toxicity tests revealed that the toxicity of sulfonamides decreased after complexation with metal ions. Moreover, when the intrinsic toxicity of a metal ion exceeded that of the corresponding antibiotics, the sum of the individual toxicities tended to be exceed the combined toxicity (before complexation) observed toxicity of the mixed system/ the observed toxicity after equilibration and complex formation.. Overall, the coordination between sulfonamides and metal ions significantly alters the photochemical properties, chemical structures, and toxicity of aquatic systems, with potential implications for solubility, photodegradation, biological toxicity, and environmental remediation strategies.
- 12 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessComplexation of sulfonamide antibiotics with metal ions: Does Toxicity Increase or Decrease?
With the increasing detection of diverse pollutants in aquatic environments and their accumulation in rivers and lakes, interactions among coexisting contaminants and their combined pollution effects have attracted growing attention. Among these, the coexistence of antibiotics and metal ions has become widespread; however, studies on the photochemical properties and biological toxicity of their complexes remain limited. This study examined changes in spectroscopic characteristics, chemical structures, and toxicity before and after complexation using two representative sulfonamide antibiotics, sulfadiazine (SDZ) and sulfamethoxazole (SMX), and three commonly occurring metal ions (Fe(III), Al(III), and Cu(II)). Toxicity was further assessed using the Vibrio fischeri assay. The spectroscopic results confirmed the occurrence of coordination between sulfonamides and metal ions. The coordination sites of SDZ were located at the nitrogen atom of the pyrimidine ring, whereas those of SMX involved the sulfonamide nitrogen and sulfonyl oxygen atoms. SDZ exhibited a higher tendency for complexation under acidic conditions, while SMX favored neutral conditions. The coordination ability of the three metal ions followed the order Fe(III) > Cu(II) > Al(III).Coordination process likely promoted the formation of luminescent chelates, increased molecular rigidity and enhanced fluorescence intensity. Toxicity tests revealed that the toxicity of sulfonamides decreased after complexation with metal ions. Moreover, when the intrinsic toxicity of a metal ion exceeded that of the corresponding antibiotics, the sum of the individual toxicities tended to be exceed the combined toxicity (before complexation) observed toxicity of the mixed system/ the observed toxicity after equilibration and complex formation.. Overall, the coordination between sulfonamides and metal ions significantly alters the photochemical properties, chemical structures, and toxicity of aquatic systems, with potential implications for solubility, photodegradation, biological toxicity, and environmental remediation strategies.
- Open Access
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Complexation of sulfonamide antibiotics with metal ions: Does Toxicity Increase or Decrease?
With the increasing detection of diverse pollutants in aquatic environments and their accumulation in rivers and lakes, interactions among coexisting contaminants and their combined pollution effects have attracted growing attention. Among these, the coexistence of antibiotics and metal ions has become widespread; however, studies on the photochemical properties and biological toxicity of their complexes remain limited. This study examined changes in spectroscopic characteristics, chemical structures, and toxicity before and after complexation using two representative sulfonamide antibiotics, sulfadiazine (SDZ) and sulfamethoxazole (SMX), and three commonly occurring metal ions (Fe(III), Al(III), and Cu(II)). Toxicity was further assessed using the Vibrio fischeri assay. The spectroscopic results confirmed the occurrence of coordination between sulfonamides and metal ions. The coordination sites of SDZ were located at the nitrogen atom of the pyrimidine ring, whereas those of SMX involved the sulfonamide nitrogen and sulfonyl oxygen atoms. SDZ exhibited a higher tendency for complexation under acidic conditions, while SMX favored neutral conditions. The coordination ability of the three metal ions followed the order Fe(III) > Cu(II) > Al(III).Coordination process likely promoted the formation of luminescent chelates, increased molecular rigidity and enhanced fluorescence intensity. Toxicity tests revealed that the toxicity of sulfonamides decreased after complexation with metal ions. Moreover, when the intrinsic toxicity of a metal ion exceeded that of the corresponding antibiotics, the sum of the individual toxicities tended to be exceed the combined toxicity (before complexation) observed toxicity of the mixed system/ the observed toxicity after equilibration and complex formation.. Overall, the coordination between sulfonamides and metal ions significantly alters the photochemical properties, chemical structures, and toxicity of aquatic systems, with potential implications for solubility, photodegradation, biological toxicity, and environmental remediation strategies.
- 30 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessComplexation of sulfonamide antibiotics with metal ions: Does Toxicity Increase or Decrease?
With the increasing detection of diverse pollutants in aquatic environments and their accumulation in rivers and lakes, interactions among coexisting contaminants and their combined pollution effects have attracted growing attention. Among these, the coexistence of antibiotics and metal ions has become widespread; however, studies on the photochemical properties and biological toxicity of their complexes remain limited. This study examined changes in spectroscopic characteristics, chemical structures, and toxicity before and after complexation using two representative sulfonamide antibiotics, sulfadiazine (SDZ) and sulfamethoxazole (SMX), and three commonly occurring metal ions (Fe(III), Al(III), and Cu(II)). Toxicity was further assessed using the Vibrio fischeri assay. The spectroscopic results confirmed the occurrence of coordination between sulfonamides and metal ions. The coordination sites of SDZ were located at the nitrogen atom of the pyrimidine ring, whereas those of SMX involved the sulfonamide nitrogen and sulfonyl oxygen atoms. SDZ exhibited a higher tendency for complexation under acidic conditions, while SMX favored neutral conditions. The coordination ability of the three metal ions followed the order Fe(III) > Cu(II) > Al(III).Coordination process likely promoted the formation of luminescent chelates, increased molecular rigidity and enhanced fluorescence intensity. Toxicity tests revealed that the toxicity of sulfonamides decreased after complexation with metal ions. Moreover, when the intrinsic toxicity of a metal ion exceeded that of the corresponding antibiotics, the sum of the individual toxicities tended to be exceed the combined toxicity (before complexation) observed toxicity of the mixed system/ the observed toxicity after equilibration and complex formation.. Overall, the coordination between sulfonamides and metal ions significantly alters the photochemical properties, chemical structures, and toxicity of aquatic systems, with potential implications for solubility, photodegradation, biological toxicity, and environmental remediation strategies.
- 2 December 2025
- Published by Elsevier in Water Research
- Vol. 290, 125091
Characteristics of organic phosphorus in sediments from lakes: Regeneration for eutrophication or a geological record in the Anthropocene?
- 2 December 2025
- Published by Elsevier in Water Research
- Vol. 290, 125091
Characteristics of organic phosphorus in sediments from lakes: Regeneration for eutrophication or a geological record in the Anthropocene?
- Open Access
Spatiotemporal Variation Characteristics of Industrial Structure in the Yellow River Basin, China, and Its Impact on the Water Environment
The Yellow River Basin (YRB) is a vital water source and an essential ecological barrier in northern China. Currently, it faces pressing challenges related to water resource security and displays pronounced disparities in regional economic development. In recent years, with the elevation of Ecological Protection and High-Quality Development to a national strategy, examining the interaction between industrial growth and water environmental quality within the basin has become a priority. This study focuses on the mainstem of the YRB. By compiling relevant data from 2000 to 2021 and collecting water samples from 20 mainstem sites, and by integrating spatial distribution information of key industrial sectors with water quality records (including representative heavy metals and anions), we found that the basin’s economic output expanded significantly over the past two decades, approximately 11.7 times. The industrial structure evolved across provinces within the basin, exhibiting an overall upward trend in industrial upgrading; nevertheless, substantial differences in industrial composition and transformation persist between the upper and lower reaches. Spatial variations in different industries are closely associated with pollutant concentrations. In particular, major industries in the middle–lower reaches, notably concentrated in regions such as Shandong, possess high total asset values. Output from certain sectors (e.g., petroleum extraction, coal mining and processing, non-metallic mineral mining and processing) is strongly correlated with pollution changes, with marked spatial linkages between their geographic distribution and concentrations of critical heavy metals (Cu, Se, Mo, Mn, Ni). Moreover, spatial analysis of the industry–pollution nexus reveals an apparent paradox in the middle–lower YRB: high industrial output coupled with relatively low levels of heavy metal contamination. This finding highlights the pivotal role of an advanced industrial structure and elevated regional development quality in mediating the balance between economic expansion and environmental pressure. In conclusion, as a globally significant large river basin, the YRB demonstrates a tight coupling between water quality and industrial structure. The results provide spatially explicit scientific evidence and policy guidance for the coordinated advancement of industrial green transformation and water quality improvement in the YRB, offering broader insights into industrial structure patterns and pollution control strategies applicable to major river basins worldwide.
Open AccessSpatiotemporal Variation Characteristics of Industrial Structure in the Yellow River Basin, China, and Its Impact on the Water Environment
The Yellow River Basin (YRB) is a vital water source and an essential ecological barrier in northern China. Currently, it faces pressing challenges related to water resource security and displays pronounced disparities in regional economic development. In recent years, with the elevation of Ecological Protection and High-Quality Development to a national strategy, examining the interaction between industrial growth and water environmental quality within the basin has become a priority. This study focuses on the mainstem of the YRB. By compiling relevant data from 2000 to 2021 and collecting water samples from 20 mainstem sites, and by integrating spatial distribution information of key industrial sectors with water quality records (including representative heavy metals and anions), we found that the basin’s economic output expanded significantly over the past two decades, approximately 11.7 times. The industrial structure evolved across provinces within the basin, exhibiting an overall upward trend in industrial upgrading; nevertheless, substantial differences in industrial composition and transformation persist between the upper and lower reaches. Spatial variations in different industries are closely associated with pollutant concentrations. In particular, major industries in the middle–lower reaches, notably concentrated in regions such as Shandong, possess high total asset values. Output from certain sectors (e.g., petroleum extraction, coal mining and processing, non-metallic mineral mining and processing) is strongly correlated with pollution changes, with marked spatial linkages between their geographic distribution and concentrations of critical heavy metals (Cu, Se, Mo, Mn, Ni). Moreover, spatial analysis of the industry–pollution nexus reveals an apparent paradox in the middle–lower YRB: high industrial output coupled with relatively low levels of heavy metal contamination. This finding highlights the pivotal role of an advanced industrial structure and elevated regional development quality in mediating the balance between economic expansion and environmental pressure. In conclusion, as a globally significant large river basin, the YRB demonstrates a tight coupling between water quality and industrial structure. The results provide spatially explicit scientific evidence and policy guidance for the coordinated advancement of industrial green transformation and water quality improvement in the YRB, offering broader insights into industrial structure patterns and pollution control strategies applicable to major river basins worldwide.
- 30 December 2024
- Published by Elsevier in Environmental Research
- Vol. 267, 120734
Coupling effect of cyanobacterial blooms with migration and transformation of typical pollutants in lake or reservoir: Enhanced or decreased?
- 30 December 2024
- Published by Elsevier in Environmental Research
- Vol. 267, 120734
Coupling effect of cyanobacterial blooms with migration and transformation of typical pollutants in lake or reservoir: Enhanced or decreased?
- Open Access
- 8 October 2024
- Published by Elsevier in Ecotoxicology and Environmental Safety
- Vol. 285, 117154
A comprehensive risk assessment of microplastics in soil, water, and atmosphere: Implications for human health and environmental safety
- 8 October 2024
- Published by Elsevier in Ecotoxicology and Environmental Safety
- Vol. 285, 117154
Open AccessA comprehensive risk assessment of microplastics in soil, water, and atmosphere: Implications for human health and environmental safety
- Open Access
Influencing Factors for the Growth of Cladophora and Its Cell Damage and Destruction Mechanism: Implication for Prevention and Treatment
Cladophora is commonly found in marine and freshwater around the globe and provides productivity for littoral zone microorganisms and invertebrates. The eutrophication of the water body has led to the abnormal proliferation of Cladophora in some water, often in river coast channel outbreaks. Even under the nutritional deficiency systems, such as the central trunk canal of the South-to-North Water Diversion in China, Cladophora’s blooms affect water quality and seriously jeopardize human health. Thus, the structural characteristics of Cladophora cells and spores, the factors affecting the growth of Cladophora cells, and the mechanisms of damage and destruction of Cladophora cells and spores were investigated. Cladophora cells are cylindrical with very thick cell walls. The inner layer of the spore wall is a thin membrane which contains the nucleus of the spore. The growth and spreading of Cladophora cells are affected by various environmental factors such as light, temperature, water depth, water level, nutrient salts, pH, etc. Some physical treatment measures, such as ultrasounds, would destroy the cell walls and membranes of Cladophora by its high-intensity mechanical action. Chemicals and aquatic plant measures can destroy Cladophora cells’ photosynthesis system, antioxidant enzyme systems, proteins, and ultrastructure. Based on the mechanisms for these cell damage and destruction, a combination of measures that are likely to inhibit the growth of Cladophora cells effectively was suggested. Furthermore, the damaged cells of Cladophora could provide some environmental benefits. Aggregated results could provide a scientific basis for further research on the control of blooms of Cladophora or the reuse of Cladophora cells as a natural resource.
Open AccessInfluencing Factors for the Growth of Cladophora and Its Cell Damage and Destruction Mechanism: Implication for Prevention and Treatment
Cladophora is commonly found in marine and freshwater around the globe and provides productivity for littoral zone microorganisms and invertebrates. The eutrophication of the water body has led to the abnormal proliferation of Cladophora in some water, often in river coast channel outbreaks. Even under the nutritional deficiency systems, such as the central trunk canal of the South-to-North Water Diversion in China, Cladophora’s blooms affect water quality and seriously jeopardize human health. Thus, the structural characteristics of Cladophora cells and spores, the factors affecting the growth of Cladophora cells, and the mechanisms of damage and destruction of Cladophora cells and spores were investigated. Cladophora cells are cylindrical with very thick cell walls. The inner layer of the spore wall is a thin membrane which contains the nucleus of the spore. The growth and spreading of Cladophora cells are affected by various environmental factors such as light, temperature, water depth, water level, nutrient salts, pH, etc. Some physical treatment measures, such as ultrasounds, would destroy the cell walls and membranes of Cladophora by its high-intensity mechanical action. Chemicals and aquatic plant measures can destroy Cladophora cells’ photosynthesis system, antioxidant enzyme systems, proteins, and ultrastructure. Based on the mechanisms for these cell damage and destruction, a combination of measures that are likely to inhibit the growth of Cladophora cells effectively was suggested. Furthermore, the damaged cells of Cladophora could provide some environmental benefits. Aggregated results could provide a scientific basis for further research on the control of blooms of Cladophora or the reuse of Cladophora cells as a natural resource.