Abdullah Abdulhameed Bagasi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Abdullah Abdulhameed Bagasi has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- John Kaiser Calautit
Department of Architecture and Built Environment, University of Nottingham, Nottingham NG7 2RD, UK
2 shared publications Abdullah Saeed Karban
Department of Islamic Architecture, Umm Al-Qura University, P.O. Box 715, Makkah, Saudi Arabia
1 shared publication- Abdullah Saeed Karban
Department of Architecture, College of Engineering and Architecture, Umm Al-Qura University, Makkah Al-Mukarramah 24382, Saudi Arabia
1 shared publication - Adnan Alshahrani
Department of Architecture, College of Engineering and Architecture, Umm Al-Qura University, Makkah Al-Mukarramah 24382, Saudi Arabia
1 shared publication - Mohammad Omar Alfadil
Architecture and Building Sciences Department, College of Architecture and Planning, King Saud University, Riyadh 12372, Saudi Arabia
1 shared publication - Mohammed Alzahrani
Department of Architecture, College of Architecture and Planning, Qassim University, Buraidah 52571, Saudi Arabia
1 shared publication
Latest Publications
- Open Access
From Spatial Form to Lived Urban Performance: A Hierarchical PLS-SEM Analysis of Perceived Design-Related Attributions for Neighborhood Satisfaction in a Hot-Climate Pilgrimage City
Urban design quality is often assessed through the presence or appearance of physical features, although residents experience design through what spatial form enables in everyday life. This study develops and tests a lived urban performance model explaining how perceived urban design quality is associated with perceived design–satisfaction attribution in Makkah, a hot-climate pilgrimage city where permanent residents coexist with recurring high-volume visitor pressure. Survey data from 340 valid respondents across Makkah neighborhoods were analyzed in R using hierarchical partial least squares structural equation modeling (PLS-SEM). Urban design quality and walkability and access were specified as reflective–formative higher-order composites and estimated through a disjoint two-stage approach. Inference was based on 5000 bootstrap samples, supplemented by measurement-sensitivity, original-specification, common-method, and repeated cross-validation checks. Urban design quality was strongly associated with walkability and access (β = 0.756), public-space quality (β = 0.358), and perceived local economic vitality (β = 0.522). Its direct association with perceived design–satisfaction attribution was not significant (β = 0.058), whereas its total indirect association was substantial (β = 0.464, 95% CI [0.340, 0.596]). Perceived local economic vitality showed the strongest direct association with perceived design–satisfaction attribution (β = 0.373), followed by public-space quality (β = 0.167). Open-ended responses identified shade and heat protection as the most salient local need. The findings show that urban design quality is associated with perceived design–satisfaction attribution primarily through its statistical associations with thermally viable access, usable public space, and continuity of everyday services. The study contributes a context-sensitive and reproducible framework for evaluating lived urban performance and social sustainability in hot-climate cities exposed to tourism, pilgrimage, or recurrent large-event pressures.
Open AccessFrom Spatial Form to Lived Urban Performance: A Hierarchical PLS-SEM Analysis of Perceived Design-Related Attributions for Neighborhood Satisfaction in a Hot-Climate Pilgrimage City
Urban design quality is often assessed through the presence or appearance of physical features, although residents experience design through what spatial form enables in everyday life. This study develops and tests a lived urban performance model explaining how perceived urban design quality is associated with perceived design–satisfaction attribution in Makkah, a hot-climate pilgrimage city where permanent residents coexist with recurring high-volume visitor pressure. Survey data from 340 valid respondents across Makkah neighborhoods were analyzed in R using hierarchical partial least squares structural equation modeling (PLS-SEM). Urban design quality and walkability and access were specified as reflective–formative higher-order composites and estimated through a disjoint two-stage approach. Inference was based on 5000 bootstrap samples, supplemented by measurement-sensitivity, original-specification, common-method, and repeated cross-validation checks. Urban design quality was strongly associated with walkability and access (β = 0.756), public-space quality (β = 0.358), and perceived local economic vitality (β = 0.522). Its direct association with perceived design–satisfaction attribution was not significant (β = 0.058), whereas its total indirect association was substantial (β = 0.464, 95% CI [0.340, 0.596]). Perceived local economic vitality showed the strongest direct association with perceived design–satisfaction attribution (β = 0.373), followed by public-space quality (β = 0.167). Open-ended responses identified shade and heat protection as the most salient local need. The findings show that urban design quality is associated with perceived design–satisfaction attribution primarily through its statistical associations with thermally viable access, usable public space, and continuity of everyday services. The study contributes a context-sensitive and reproducible framework for evaluating lived urban performance and social sustainability in hot-climate cities exposed to tourism, pilgrimage, or recurrent large-event pressures.
- Open Access
- 23 July 2026
- Published by Springer Nature in Journal of King Saud University – Engineering Sciences
- Vol. 38 (6) , 45
The feasibility of implementing a low-emission zone in central Makkah: environmental indicators and urban quality implications
The Central Area of Makkah faces severe seasonal environmental pressures from heavy vehicular traffic, particularly during Hajj. Using the DPSIR framework, this study conducts a spatial and environmental diagnosis of this high-density urban core. To assess the environmental conditions, spatial sampling and field measurements were conducted at 32 strategic locations, using a calibrated Extech VPC300 Video Particle Counter for PM 2.5 and PM 10 , along with portable multi-parameter detectors for CO and CO 2 . Field measurements captured two seasonal operational extremes: Phase 1 (baseline peak congestion, 20 Dhu Al-Qi’dah 1446AH) and Phase 2 (strict traffic cordon restrictions, serving as a real-world LEZ proxy, 2 Dhu al-Hijjah 1446AH). Paired-samples t-test validation indicates that during peak congestion, localised CO 2 reached 1,750 ppm and noise peaked at 95 dB, while localised PM2.5 and PM10 particle counts demonstrated elevated concentrations. Methodological baseline calculations reveal that the localised prayer shuttle fleet generates a carbon footprint four times larger (57,888 tons of CO 2 ) than the inbound regional fleet, condition compounded by the dense ‘street canyon’ morphology. Conversely, spatial analysis identifies 2.5 million m 2 of vacant land. As a targeted ‘Response’, this paper introduces the Makkah Low Emission Zone (M-LEZ) framework. Distinct from conventional urban LEZs, the M-LEZ introduces a dynamically phased seasonal framework that utilises underused peripheral land for green infrastructure and transit hubs. It aims to balance mass transit logistics with microclimate sustainability and promotes public health for pedestrians.
- 23 July 2026
- Published by Springer Nature in Journal of King Saud University – Engineering Sciences
- Vol. 38 (6) , 45
Open AccessThe feasibility of implementing a low-emission zone in central Makkah: environmental indicators and urban quality implications
The Central Area of Makkah faces severe seasonal environmental pressures from heavy vehicular traffic, particularly during Hajj. Using the DPSIR framework, this study conducts a spatial and environmental diagnosis of this high-density urban core. To assess the environmental conditions, spatial sampling and field measurements were conducted at 32 strategic locations, using a calibrated Extech VPC300 Video Particle Counter for PM 2.5 and PM 10 , along with portable multi-parameter detectors for CO and CO 2 . Field measurements captured two seasonal operational extremes: Phase 1 (baseline peak congestion, 20 Dhu Al-Qi’dah 1446AH) and Phase 2 (strict traffic cordon restrictions, serving as a real-world LEZ proxy, 2 Dhu al-Hijjah 1446AH). Paired-samples t-test validation indicates that during peak congestion, localised CO 2 reached 1,750 ppm and noise peaked at 95 dB, while localised PM2.5 and PM10 particle counts demonstrated elevated concentrations. Methodological baseline calculations reveal that the localised prayer shuttle fleet generates a carbon footprint four times larger (57,888 tons of CO 2 ) than the inbound regional fleet, condition compounded by the dense ‘street canyon’ morphology. Conversely, spatial analysis identifies 2.5 million m 2 of vacant land. As a targeted ‘Response’, this paper introduces the Makkah Low Emission Zone (M-LEZ) framework. Distinct from conventional urban LEZs, the M-LEZ introduces a dynamically phased seasonal framework that utilises underused peripheral land for green infrastructure and transit hubs. It aims to balance mass transit logistics with microclimate sustainability and promotes public health for pedestrians.
- Open Access
Evaluation of the Integration of the Traditional Architectural Element Mashrabiya into the Ventilation Strategy for Buildings in Hot Climates
This paper reviewed related research works and developments on the traditional architectural element “mashrabiya” focusing on its history, design and structure, typology, and functions in hot climates. Moreover, the paper assessed the effect of the traditional mashrabiya on the indoor thermal environment and thermal comfort in a selected case study building. For this purpose, two similar rooms were investigated in a selected historic building with abundant mashrabiyas located in the Makkah Region, specifically in Old Jeddah, Saudi Arabia. The field tests were conducted during a typical hot summer month with two different configurations. The study demonstrated that opening the mashrabiya allowed more airflow into the room during the day and reduced the indoor temperature by up to 2.4 °C as compared to the closed mashrabiya. Besides, the building envelope played an important role in preventing the high fluctuation of the indoor air temperature, where the fluctuation of the rooms air temperature ranged between 2.1 °C and 4.2 °C compared to the outdoor temperature which recorded a fluctuation between 9.4 °C and 16 °C. The data presented here can be used for the future development of the mashrabiya concept and the potential incorporation with passive cooling methods to improve its design according to the requirements of modern buildings in hot climates. Moreover, further studies and tests on mashrabiyas under different climatic conditions are required. Also, the different strategies or materials can be incorporated with mashrabiyas in order to improve its thermal performance.
Open AccessEvaluation of the Integration of the Traditional Architectural Element Mashrabiya into the Ventilation Strategy for Buildings in Hot Climates
This paper reviewed related research works and developments on the traditional architectural element “mashrabiya” focusing on its history, design and structure, typology, and functions in hot climates. Moreover, the paper assessed the effect of the traditional mashrabiya on the indoor thermal environment and thermal comfort in a selected case study building. For this purpose, two similar rooms were investigated in a selected historic building with abundant mashrabiyas located in the Makkah Region, specifically in Old Jeddah, Saudi Arabia. The field tests were conducted during a typical hot summer month with two different configurations. The study demonstrated that opening the mashrabiya allowed more airflow into the room during the day and reduced the indoor temperature by up to 2.4 °C as compared to the closed mashrabiya. Besides, the building envelope played an important role in preventing the high fluctuation of the indoor air temperature, where the fluctuation of the rooms air temperature ranged between 2.1 °C and 4.2 °C compared to the outdoor temperature which recorded a fluctuation between 9.4 °C and 16 °C. The data presented here can be used for the future development of the mashrabiya concept and the potential incorporation with passive cooling methods to improve its design according to the requirements of modern buildings in hot climates. Moreover, further studies and tests on mashrabiyas under different climatic conditions are required. Also, the different strategies or materials can be incorporated with mashrabiyas in order to improve its thermal performance.
- 1 October 2020
- Published by Elsevier in Energy and Buildings
- Vol. 225
Experimental field study of the integration of passive and evaporative cooling techniques with Mashrabiya in hot climates
- 1 October 2020
- Published by Elsevier in Energy and Buildings
- Vol. 225
Experimental field study of the integration of passive and evaporative cooling techniques with Mashrabiya in hot climates