Jegor Miladinović
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Jegor Miladinović has a total of 177 co-authors. Here are the top co-authors by number of shared publications:
- Vuk Đorđević
Institute of Field and Vegetable Crops, National Institute of the Republic of Serbia, Maksima Gorkog 30, 21 000 Novi Sad, Serbia
20 shared publications - Vojin Đukić
Institute of Field and Vegetable Crops, Novi Sad, Serbia
11 shared publications - Marina Ćeran
Institute of Field and Vegetable Crops
9 shared publications - Marjana Vasiljević
Institute of Field and Vegetable Crops, National Institute of the Republic of Serbia, Maksima Gorkog 30, 21 000 Novi Sad, Serbia
8 shared publications - Dragana Miladinović
Institute of Field and Vegetable Crops, National Institute of Republic of Serbia, Maksima Gorkog 30, 21000 Novi Sad, Serbia
6 shared publications Vojin Djukic
Institute of Field and Vegetable Crops, Novi Sad, Serbia
6 shared publications
Latest Publications
- Open Access
- 29 May 2026
- Published by Walter de Gruyter GmbH in Contemporary Agriculture
- Vol. 75 (1) , 106-114
Timing of Primary Soil Tillage as a Determinant of Soybean ( Glycine max L.) Productivity
Timing of primary soil tillage is a key agronomic practice influencing soybean (Glycine max L.) yield and seed quality. Soil physical properties, root development, and nutrient availability are affected by tillage timing, which can interact with cultivar characteristics and environmental conditions. A field experiment was conducted over two growing seasons (2023–2024) near Bačka Topola. Three tillage timings (autumn, winter, spring) and three soybean cultivars (‘NS Atlas’, ‘NS Hogar’, ‘Rubin’) were tested in a three-factorial design with three replications. Grain yield and thousand-seed weight were measured at harvest. Statistical analysis was performed to assess the main effects and interactions of year, cultivar, and tillage timing. Tillage timing significantly affected both grain yield and thousand-seed weight. Autumn tillage consistently produced the highest yield and heaviest seeds, while spring tillage resulted in the lowest values. Cultivar differences were present, with Rubin performing best, but the effect of tillage timing was more pronounced. Interactions between the year, cultivar, and tillage timing highlighted the influence of environmental conditions on yield formation. Timely primary tillage, particularly in autumn, enhances soil structure, root development, and water-nutrient use efficiency, leading to higher yields and improved seed quality. Optimal tillage timing, combined with cultivar selection, is essential for achieving stable and high soybean production under variable agroecological conditions.
- 29 May 2026
- Published by Walter de Gruyter GmbH in Contemporary Agriculture
- Vol. 75 (1) , 106-114
Open AccessTiming of Primary Soil Tillage as a Determinant of Soybean ( Glycine max L.) Productivity
Timing of primary soil tillage is a key agronomic practice influencing soybean (Glycine max L.) yield and seed quality. Soil physical properties, root development, and nutrient availability are affected by tillage timing, which can interact with cultivar characteristics and environmental conditions. A field experiment was conducted over two growing seasons (2023–2024) near Bačka Topola. Three tillage timings (autumn, winter, spring) and three soybean cultivars (‘NS Atlas’, ‘NS Hogar’, ‘Rubin’) were tested in a three-factorial design with three replications. Grain yield and thousand-seed weight were measured at harvest. Statistical analysis was performed to assess the main effects and interactions of year, cultivar, and tillage timing. Tillage timing significantly affected both grain yield and thousand-seed weight. Autumn tillage consistently produced the highest yield and heaviest seeds, while spring tillage resulted in the lowest values. Cultivar differences were present, with Rubin performing best, but the effect of tillage timing was more pronounced. Interactions between the year, cultivar, and tillage timing highlighted the influence of environmental conditions on yield formation. Timely primary tillage, particularly in autumn, enhances soil structure, root development, and water-nutrient use efficiency, leading to higher yields and improved seed quality. Optimal tillage timing, combined with cultivar selection, is essential for achieving stable and high soybean production under variable agroecological conditions.
- Open Access
- 25 April 2026
- Published by Agricultural Research Communication Center in Legume Research - An International Journal
- No. Of
Soybean Seed Responses to Defoliation Stress
Background: Leaf loss (defoliation) is a common stress in soybean production, caused by both abiotic and biotic factors and it directly affects seed physiological and biochemical processes. Methods: The experiment was conducted over two growing seasons (April 2024-November 2025). Defoliation was applied at the vegetative (V1) and reproductive (R1) stages at intensities of 33%, 67% and 100%. Seed quality was evaluated through standard germination tests, cold tests and analysis of lipid peroxidation and free proline levels. Result: Partial defoliation during the vegetative stage improved germination and reduced the proportion of abnormal seedlings, whereas complete defoliation at flowering decreased seed weight, seedling vigor and cold tolerance. Elevated levels of lipid peroxidation and free proline indicated oxidative stress and activation of adaptive mechanisms. Both the intensity and timing of defoliation significantly influence seed quality and physiological resilience, providing valuable insights for the development of management strategies under mechanical and climatic stress conditions.
- 25 April 2026
- Published by Agricultural Research Communication Center in Legume Research - An International Journal
- No. Of
Open AccessSoybean Seed Responses to Defoliation Stress
Background: Leaf loss (defoliation) is a common stress in soybean production, caused by both abiotic and biotic factors and it directly affects seed physiological and biochemical processes. Methods: The experiment was conducted over two growing seasons (April 2024-November 2025). Defoliation was applied at the vegetative (V1) and reproductive (R1) stages at intensities of 33%, 67% and 100%. Seed quality was evaluated through standard germination tests, cold tests and analysis of lipid peroxidation and free proline levels. Result: Partial defoliation during the vegetative stage improved germination and reduced the proportion of abnormal seedlings, whereas complete defoliation at flowering decreased seed weight, seedling vigor and cold tolerance. Elevated levels of lipid peroxidation and free proline indicated oxidative stress and activation of adaptive mechanisms. Both the intensity and timing of defoliation significantly influence seed quality and physiological resilience, providing valuable insights for the development of management strategies under mechanical and climatic stress conditions.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Ratarstvo i povrtarstvo
- No. 00,p. 8
Comparative effects of conventional rhizobial inoculants and novel PGPR consortia on rhizosphere microbial parameters and soybean performance
Bradyrhizobium-based inoculants are widely used in soybean production. Under the field conditions, numerous abiotic and biotic factors can compromise strain survival and significantly reduce their effectiveness. The application of PGPR consortia represents a promising approach for improving the quality of conventional inoculants and soybean performance while supporting beneficial microorganisms in the rhizosphere. This study aimed to comparatively examine the effects of three bacterial treatments: Bradyrhizobium japonicum consortium alone and in combination with two distinct PGPR consortia, which differ in strain composition and origin. The inoculants were evaluated on sterile chernozem soil in a pot experiment under semi-controlled conditions by assessing soybean growth, biomass, and nodulation, as well as rhizosphere microbial abundance and activity. The conventional rhizobial inoculant supplemented with a drought-adapted PGPR consortium originating from the soybean rhizosphere significantly increased the abundance of total bacteria, free-living nitrogen-fixing bacteria, azotobacters, and ammonifiers, as well as dehydrogenase activity and soil respiration, compared with Bradyrhizobium inoculation alone or in combination with the other PGPR consortium. The greatest effect on soybean growth and biomass was also observed with this bacterial treatment, indicating the potential of novel PGPR strains to improve the quality and effectiveness of conventional inoculants. The obtained findings could contribute to the development of more effective soybean inoculation strategies through the selection of functionally diverse but complementary bacterial strains adapted to the host plant and specific environmental conditions.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Ratarstvo i povrtarstvo
- No. 00,p. 8
Open AccessComparative effects of conventional rhizobial inoculants and novel PGPR consortia on rhizosphere microbial parameters and soybean performance
Bradyrhizobium-based inoculants are widely used in soybean production. Under the field conditions, numerous abiotic and biotic factors can compromise strain survival and significantly reduce their effectiveness. The application of PGPR consortia represents a promising approach for improving the quality of conventional inoculants and soybean performance while supporting beneficial microorganisms in the rhizosphere. This study aimed to comparatively examine the effects of three bacterial treatments: Bradyrhizobium japonicum consortium alone and in combination with two distinct PGPR consortia, which differ in strain composition and origin. The inoculants were evaluated on sterile chernozem soil in a pot experiment under semi-controlled conditions by assessing soybean growth, biomass, and nodulation, as well as rhizosphere microbial abundance and activity. The conventional rhizobial inoculant supplemented with a drought-adapted PGPR consortium originating from the soybean rhizosphere significantly increased the abundance of total bacteria, free-living nitrogen-fixing bacteria, azotobacters, and ammonifiers, as well as dehydrogenase activity and soil respiration, compared with Bradyrhizobium inoculation alone or in combination with the other PGPR consortium. The greatest effect on soybean growth and biomass was also observed with this bacterial treatment, indicating the potential of novel PGPR strains to improve the quality and effectiveness of conventional inoculants. The obtained findings could contribute to the development of more effective soybean inoculation strategies through the selection of functionally diverse but complementary bacterial strains adapted to the host plant and specific environmental conditions.
- Open Access
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Zemljiste i biljka
- Vol. 75 (1) , 33-41
Changes in the yield and some morphological characteristics of soybeans due to the application of ammonium nitrate
The pre-sowing application of ammonium nitrate provides plants with nitrogen in the initial stages of growth, prevents nitrogen depression during plant emergence and has a positive effect on the yield of cultivated plants. The pre-sowing application of larger amounts of ammonium nitrate in legumes can also have a negative effect, because it blocks the development and efficiency of nodule bacteria, which negatively affects the achieved yield and morphological characteristics of the plants. The influence of the pre-sowing application of different doses of ammonium nitrate on the yield and morphological characteristics of soybean plants was investigated during 2023 and 2024 on a private plot in Selenca, with the medium-sized soybean variety NS Apolo. The two-year results show that the pre-sowing application of ammonium nitrate of 100 kgha-1 statistically very significantly increased the yield of soybeans, the weight of one thousand grains, the number of grains per plant and the weight of grains per plant, while the application of ammonium nitrate in the amount of 300 kgha-1, compared to the application of ammonium nitrate of 100 kgha-1, statistically significantly reduced the yield of soybeans and the weight of one thousand grains, and compared to the control variant, it statistically significantly reduced the number of grains per plant and grain mass per plant and statistically significantly reduced the mass of one thousand grains. Excessive doses of ammonium nitrate can lead to a decrease in yield and negatively affect the morphological characteristics of soybean plants.
- 1 January 2026
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Zemljiste i biljka
- Vol. 75 (1) , 33-41
Open AccessChanges in the yield and some morphological characteristics of soybeans due to the application of ammonium nitrate
The pre-sowing application of ammonium nitrate provides plants with nitrogen in the initial stages of growth, prevents nitrogen depression during plant emergence and has a positive effect on the yield of cultivated plants. The pre-sowing application of larger amounts of ammonium nitrate in legumes can also have a negative effect, because it blocks the development and efficiency of nodule bacteria, which negatively affects the achieved yield and morphological characteristics of the plants. The influence of the pre-sowing application of different doses of ammonium nitrate on the yield and morphological characteristics of soybean plants was investigated during 2023 and 2024 on a private plot in Selenca, with the medium-sized soybean variety NS Apolo. The two-year results show that the pre-sowing application of ammonium nitrate of 100 kgha-1 statistically very significantly increased the yield of soybeans, the weight of one thousand grains, the number of grains per plant and the weight of grains per plant, while the application of ammonium nitrate in the amount of 300 kgha-1, compared to the application of ammonium nitrate of 100 kgha-1, statistically significantly reduced the yield of soybeans and the weight of one thousand grains, and compared to the control variant, it statistically significantly reduced the number of grains per plant and grain mass per plant and statistically significantly reduced the mass of one thousand grains. Excessive doses of ammonium nitrate can lead to a decrease in yield and negatively affect the morphological characteristics of soybean plants.
- Open Access
- 21 December 2025
- Published by MDPI AG in Agriculture
- Vol. 16 (1) , 22
Soybean Yield Prediction with High-Throughput Phenotyping Data and Machine Learning
The non-destructive estimation of grain yield could increase the efficiency of soybean breeding through early genotype testing, allowing for more precise selection of superior varieties. High-throughput phenotyping (HTPP) data can be combined with machine learning (ML) to develop accurate prediction models. In this study, an unmanned aerial vehicle (UAV) equipped with a multispectral camera was utilized to collect data on plant density (PD), plant height (PH), canopy cover (CC), biomass (BM), and various vegetation indices (VIs) from different stages of soybean development. These traits were used within random forest (RF) and partial least squares regression (PLSR) algorithms to develop models for soybean yield estimation. The initial RF model produced more accurate results, as it had a smaller error between actual and predicted yield compared with the PLSR model. To increase the efficiency of the RF model and optimize the data collection process, the number of predictors was gradually decreased by eliminating highly correlated VIs and selecting the most important variables. The final prediction was based only on several VIs calculated from a few mid-soybean stages. Although the reduction in the number of predictors increased the yield estimation error to some extent, the R2 in the final model remained high (R2 = 0.79). Therefore, the proposed ML model based on specific HTPP variables represents an optimal balance between efficiency and prediction accuracy for in-season soybean yield estimation.
- 21 December 2025
- Published by MDPI AG in Agriculture
- Vol. 16 (1) , 22
Open AccessSoybean Yield Prediction with High-Throughput Phenotyping Data and Machine Learning
The non-destructive estimation of grain yield could increase the efficiency of soybean breeding through early genotype testing, allowing for more precise selection of superior varieties. High-throughput phenotyping (HTPP) data can be combined with machine learning (ML) to develop accurate prediction models. In this study, an unmanned aerial vehicle (UAV) equipped with a multispectral camera was utilized to collect data on plant density (PD), plant height (PH), canopy cover (CC), biomass (BM), and various vegetation indices (VIs) from different stages of soybean development. These traits were used within random forest (RF) and partial least squares regression (PLSR) algorithms to develop models for soybean yield estimation. The initial RF model produced more accurate results, as it had a smaller error between actual and predicted yield compared with the PLSR model. To increase the efficiency of the RF model and optimize the data collection process, the number of predictors was gradually decreased by eliminating highly correlated VIs and selecting the most important variables. The final prediction was based only on several VIs calculated from a few mid-soybean stages. Although the reduction in the number of predictors increased the yield estimation error to some extent, the R2 in the final model remained high (R2 = 0.79). Therefore, the proposed ML model based on specific HTPP variables represents an optimal balance between efficiency and prediction accuracy for in-season soybean yield estimation.
- Open Access
- 26 September 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (19) , 2022
Synergistic Effect of PGPR and Nutrient Complex on Soybean Seed Germination and Initial Seedling Growth
Biostimulants based on Bradyrhizobium japonicum are commonly used in soybean production. However, the effect of nitrogen-fixing bacteria in consortia with other plant growth-promoting rhizobacteria (PGPR) and their integration with mineral nutrients on soybean seed quality has not been explored. The study aimed to examine the effects of five treatments on seed germination and initial seedling growth of two soybean cultivars (‘NS Apolo’, ‘NS Rubin’): control (untreated seeds); Br. japonicum (BJ), BJ and nutrient complex (NC), BJ, Azotobacter chroococcum (AC), Bacillus subtilis (BS), and NC; BJ, AC, Bacillus megaterium (BM), and NC. Seed treatments significantly enhanced germination energy, seedling vigor index, root length, fresh shoot weight, fresh root weight, dry shoot weight, and dry root weight of both cultivars, as well as final germination, shoot length, and shoot elongation rate of ‘NS Rubin’, as compared to the control. The highest effect on the investigated parameters was achieved by integrated use of PGPR and nutrients (BJ + BM + AC + NC), indicating that integration of PGPR with a targeted NC represents an innovative approach with practical implications for improving early soybean establishment and field performance.
- 26 September 2025
- Published by MDPI AG in Agriculture
- Vol. 15 (19) , 2022
Open AccessSynergistic Effect of PGPR and Nutrient Complex on Soybean Seed Germination and Initial Seedling Growth
Biostimulants based on Bradyrhizobium japonicum are commonly used in soybean production. However, the effect of nitrogen-fixing bacteria in consortia with other plant growth-promoting rhizobacteria (PGPR) and their integration with mineral nutrients on soybean seed quality has not been explored. The study aimed to examine the effects of five treatments on seed germination and initial seedling growth of two soybean cultivars (‘NS Apolo’, ‘NS Rubin’): control (untreated seeds); Br. japonicum (BJ), BJ and nutrient complex (NC), BJ, Azotobacter chroococcum (AC), Bacillus subtilis (BS), and NC; BJ, AC, Bacillus megaterium (BM), and NC. Seed treatments significantly enhanced germination energy, seedling vigor index, root length, fresh shoot weight, fresh root weight, dry shoot weight, and dry root weight of both cultivars, as well as final germination, shoot length, and shoot elongation rate of ‘NS Rubin’, as compared to the control. The highest effect on the investigated parameters was achieved by integrated use of PGPR and nutrients (BJ + BM + AC + NC), indicating that integration of PGPR with a targeted NC represents an innovative approach with practical implications for improving early soybean establishment and field performance.
- Open Access
- 27 March 2025
- Published by Balkan Scientific Association of Agricultural Economists in Ekonomika poljoprivrede
- Vol. 72 (1) , 345-355
HISTORICAL DEVELOPMENT OF SOYBEAN PRODUCTION DEPENDING ON THE AGROECOLOGICAL CONDITIONS OF SERBIA
In order for the production of a plant species to take a significant place in the crop structure, in addition to favorable agro-ecological conditions, there must be a national strategy. After the state implemented the “action” plan, the processing sector and breeding, i.e. the development of high-yielding domestic varieties, with good adaptability and stability, intensified. This implied that Serbia would become the only country in Europe that produces enough soybeans for its own needs. The aim of the research is the influence of agro-climatic conditions on soybean production in the province of Vojvodina. High-yielding soybean varieties contributed to an average yield of over 3,000 kg ha-1 for the period 2010 2019. Intensive development of new soybean varieties is aimed at addressing climate change, which has become increasingly unfavorable. Data indicate that interest in soybean production in Serbia is growing and this trend is expected to continue in the future.
- 27 March 2025
- Published by Balkan Scientific Association of Agricultural Economists in Ekonomika poljoprivrede
- Vol. 72 (1) , 345-355
Open AccessHISTORICAL DEVELOPMENT OF SOYBEAN PRODUCTION DEPENDING ON THE AGROECOLOGICAL CONDITIONS OF SERBIA
In order for the production of a plant species to take a significant place in the crop structure, in addition to favorable agro-ecological conditions, there must be a national strategy. After the state implemented the “action” plan, the processing sector and breeding, i.e. the development of high-yielding domestic varieties, with good adaptability and stability, intensified. This implied that Serbia would become the only country in Europe that produces enough soybeans for its own needs. The aim of the research is the influence of agro-climatic conditions on soybean production in the province of Vojvodina. High-yielding soybean varieties contributed to an average yield of over 3,000 kg ha-1 for the period 2010 2019. Intensive development of new soybean varieties is aimed at addressing climate change, which has become increasingly unfavorable. Data indicate that interest in soybean production in Serbia is growing and this trend is expected to continue in the future.
- Open Access
Perspectives of Bradyrhizobium and Bacillus Inoculation for Improvement of Soybean Tolerance to Water Deficit
The objective of this study was to analyze the response of antioxidant parameters in soybean plants inoculated with newly isolated Bradyrhizobium japonicum and Bacillus subtilis strains as single and co-inoculants under drought stress. Bacterial strains were selected according to osmotic stress tolerance (in the presence of 36% PEG 6000) in appropriate liquid media. The effect of soybean inoculation was examined in a soil pot experiment in water deficit conditions (0 and 7 days withholding water). The influence of water stress and inoculation was evaluated in soybean leaves, roots, and nodules through guaiacol peroxidase (POX), ionically cell-wall-bound peroxidase (POD) activity, and ABTS˙+ radical cation scavenging capacity, as well as parameters of N-fixation efficiency. The results showed a significant influence of inoculation on constitutive and drought-induced antioxidant and N-fixation parameters. Inoculation increased the activity of POX (up to 116, 169, and 245%), POD (up to 116, 102, and 159%), and antioxidant capacity (up to 74, 76, and 81%) in soybean leaves, roots, and nodules under water deficit, respectively. Application of bacterial strains resulted in higher shoot, root, and nodule weight and nitrogen content both in non-stressed and drought stress conditions. Overall, co-inoculation had better effects on the investigated soybean parameters compared to single inoculation. Selection and application of bacterial strains with improved tolerance to drought stress is necessary in developing inoculants that would result in enhanced crop production under unfavorable environmental conditions.
Open AccessPerspectives of Bradyrhizobium and Bacillus Inoculation for Improvement of Soybean Tolerance to Water Deficit
The objective of this study was to analyze the response of antioxidant parameters in soybean plants inoculated with newly isolated Bradyrhizobium japonicum and Bacillus subtilis strains as single and co-inoculants under drought stress. Bacterial strains were selected according to osmotic stress tolerance (in the presence of 36% PEG 6000) in appropriate liquid media. The effect of soybean inoculation was examined in a soil pot experiment in water deficit conditions (0 and 7 days withholding water). The influence of water stress and inoculation was evaluated in soybean leaves, roots, and nodules through guaiacol peroxidase (POX), ionically cell-wall-bound peroxidase (POD) activity, and ABTS˙+ radical cation scavenging capacity, as well as parameters of N-fixation efficiency. The results showed a significant influence of inoculation on constitutive and drought-induced antioxidant and N-fixation parameters. Inoculation increased the activity of POX (up to 116, 169, and 245%), POD (up to 116, 102, and 159%), and antioxidant capacity (up to 74, 76, and 81%) in soybean leaves, roots, and nodules under water deficit, respectively. Application of bacterial strains resulted in higher shoot, root, and nodule weight and nitrogen content both in non-stressed and drought stress conditions. Overall, co-inoculation had better effects on the investigated soybean parameters compared to single inoculation. Selection and application of bacterial strains with improved tolerance to drought stress is necessary in developing inoculants that would result in enhanced crop production under unfavorable environmental conditions.
- Open Access
Impact of Simultaneous Nutrient Priming and Biopriming on Soybean Seed Quality and Health
In soybean production, numerous strategies are utilized to enhance seed quality and mitigate the effects of biotic and abiotic stressors. Zn-based nutrient priming has been shown to be effective for field crops, and biopriming is a strategy that is becoming increasingly important for sustainable agriculture. On the other hand, there is a lack of information about the effect of comprehensive nutrient priming and biopriming techniques on soybean seed quality and viability and seed health. This study was performed to assess the benefits of nutrient priming with Zn, biopriming with Bacillus megaterium and Bradyrhizobium japonicum (single and co-inoculation), and combination of nutrient priming and biopriming on the seed quality and viability, as well as seed infection caused by Alternaria spp. and Fusarium spp. Three different laboratory tests were employed: germination test, accelerated aging test, and seed health test. The results revealed that all tested priming treatments have a beneficial effect on seed germination, initial plant growth, and reduction of seed infection in normal and aged seeds. Additionally, comprehensive priming with Zn, Bacillus megaterium, and Bradyrhizobium japonicum reduced the occurrence of Alternaria spp. (−84% and −75%) and Fusarium spp. (−91% and −88%) on soybean seeds in the germination and accelerated aging tests, respectively, as compared to the control, which proved to be the most effective treatment in both optimal and stressful conditions.
Open AccessImpact of Simultaneous Nutrient Priming and Biopriming on Soybean Seed Quality and Health
In soybean production, numerous strategies are utilized to enhance seed quality and mitigate the effects of biotic and abiotic stressors. Zn-based nutrient priming has been shown to be effective for field crops, and biopriming is a strategy that is becoming increasingly important for sustainable agriculture. On the other hand, there is a lack of information about the effect of comprehensive nutrient priming and biopriming techniques on soybean seed quality and viability and seed health. This study was performed to assess the benefits of nutrient priming with Zn, biopriming with Bacillus megaterium and Bradyrhizobium japonicum (single and co-inoculation), and combination of nutrient priming and biopriming on the seed quality and viability, as well as seed infection caused by Alternaria spp. and Fusarium spp. Three different laboratory tests were employed: germination test, accelerated aging test, and seed health test. The results revealed that all tested priming treatments have a beneficial effect on seed germination, initial plant growth, and reduction of seed infection in normal and aged seeds. Additionally, comprehensive priming with Zn, Bacillus megaterium, and Bradyrhizobium japonicum reduced the occurrence of Alternaria spp. (−84% and −75%) and Fusarium spp. (−91% and −88%) on soybean seeds in the germination and accelerated aging tests, respectively, as compared to the control, which proved to be the most effective treatment in both optimal and stressful conditions.
- Open Access
Selective Genotyping and Phenotyping for Optimization of Genomic Prediction Models for Populations with Different Diversity
To overcome the different challenges to food security caused by a growing population and climate change, soybean (Glycine max (L.) Merr.) breeders are creating novel cultivars that have the potential to improve productivity while maintaining environmental sustainability. Genomic selection (GS) is an advanced approach that may accelerate the rate of genetic gain in breeding using genome-wide molecular markers. The accuracy of genomic selection can be affected by trait architecture and heritability, marker density, linkage disequilibrium, statistical models, and training set. The selection of a minimal and optimal marker set with high prediction accuracy can lower genotyping costs, computational time, and multicollinearity. Selective phenotyping could reduce the number of genotypes tested in the field while preserving the genetic diversity of the initial population. This study aimed to evaluate different methods of selective genotyping and phenotyping on the accuracy of genomic prediction for soybean yield. The evaluation was performed on three populations: recombinant inbred lines, multifamily diverse lines, and germplasm collection. Strategies adopted for marker selection were as follows: SNP (single nucleotide polymorphism) pruning, estimation of marker effects, randomly selected markers, and genome-wide association study. Reduction of the number of genotypes was performed by selecting a core set from the initial population based on marker data, yet maintaining the original population’s genetic diversity. Prediction ability using all markers and genotypes was different among examined populations. The subsets obtained by the model-based strategy can be considered the most suitable for marker selection for all populations. The selective phenotyping based on makers in all cases had higher values of prediction ability compared to minimal values of prediction ability of multiple cycles of random selection, with the highest values of prediction obtained using AN approach and 75% population size. The obtained results indicate that selective genotyping and phenotyping hold great potential and can be integrated as tools for improving or retaining selection accuracy by reducing genotyping or phenotyping costs for genomic selection.
Open AccessSelective Genotyping and Phenotyping for Optimization of Genomic Prediction Models for Populations with Different Diversity
To overcome the different challenges to food security caused by a growing population and climate change, soybean (Glycine max (L.) Merr.) breeders are creating novel cultivars that have the potential to improve productivity while maintaining environmental sustainability. Genomic selection (GS) is an advanced approach that may accelerate the rate of genetic gain in breeding using genome-wide molecular markers. The accuracy of genomic selection can be affected by trait architecture and heritability, marker density, linkage disequilibrium, statistical models, and training set. The selection of a minimal and optimal marker set with high prediction accuracy can lower genotyping costs, computational time, and multicollinearity. Selective phenotyping could reduce the number of genotypes tested in the field while preserving the genetic diversity of the initial population. This study aimed to evaluate different methods of selective genotyping and phenotyping on the accuracy of genomic prediction for soybean yield. The evaluation was performed on three populations: recombinant inbred lines, multifamily diverse lines, and germplasm collection. Strategies adopted for marker selection were as follows: SNP (single nucleotide polymorphism) pruning, estimation of marker effects, randomly selected markers, and genome-wide association study. Reduction of the number of genotypes was performed by selecting a core set from the initial population based on marker data, yet maintaining the original population’s genetic diversity. Prediction ability using all markers and genotypes was different among examined populations. The subsets obtained by the model-based strategy can be considered the most suitable for marker selection for all populations. The selective phenotyping based on makers in all cases had higher values of prediction ability compared to minimal values of prediction ability of multiple cycles of random selection, with the highest values of prediction obtained using AN approach and 75% population size. The obtained results indicate that selective genotyping and phenotyping hold great potential and can be integrated as tools for improving or retaining selection accuracy by reducing genotyping or phenotyping costs for genomic selection.