BMBartosz Mozgawa

Bartosz Mozgawa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Bartosz Mozgawa has a total of 48 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Beyond Morphology: Revealing Support-Active Phase Coupling in Spherical SiO2 and TiO2 Nanoreactors for Cu- and Co-Oxide-Catalyzed Toluene Combustion

    by Anna RokicińsKa, Bartosz Mozgawa, Piotr ŁątKa, Magdalena ŻuRowska, Marek Drozdek, Lucie Lindenbeck, Adam Slabon, Piotr KuśtRowski

    Disentangling the intrinsic contribution of support-active phase interactions remains a major challenge in heterogeneous catalysis, as conventional supported catalysts often combine variations in morphology, particle size, dispersion, and support chemistry. Herein, we introduce hollow SiO2 and TiO2 nanoreactors containing encapsulated transition metal oxide particles as model platforms for systematically investigating how chemically distinct oxide environments influence transition metal oxide catalysts during volatile organic compounds (VOCs) oxidation. Mesoporous amorphous SiO2 and anatase TiO2 shells with comparable diameters (500–600 nm) and similar textural properties were synthesized using polymeric spherical templates. Subsequent impregnation with 5–15 wt % Cu or Co, followed by calcination, yielded nanoreactors containing predominantly crystalline CuO or Co3O4 particles within the internal cavities. The CuO- or Co3O4-based systems exhibited fundamentally different support-active phase coupling. Strong interactions between CuO and TiO2 modified the Cu coordination environment without significant incorporation of Cu2+ into the TiO2 lattice, while ex situ XPS/XAS measurements indicated Cu+ as the dominant surface Cu species after air exposure. In contrast, Co3O4 interacted only weakly with the surrounding oxides, and its catalytic behavior was influenced primarily by crystallite size and oxygen reducibility. Consequently, the @TiO2_CuO and @SiO2_Co3O4 nanoreactors displayed the highest activity in toluene combustion. In situ DRIFT measurements revealed that TiO2 promotes the stabilization and conversion of oxygenated surface intermediates, whereas such species were largely absent within the SiO2 nanoreactors. Combined with H2-TPR results, these findings demonstrate that VOCs oxidation proceeds via the Mars-van Krevelen mechanism, with catalytic activity closely correlated with lattice oxygen mobility. This work establishes hollow oxide nanoreactors as powerful model systems for investigating support-active phase interactions beyond morphological effects and provides new design principles for VOCs abatement catalysts.

  • Open Access

    From Electrochemically Depolymerized Lignin Residues to Functional Carbon Materials for Phenol Adsorption and Redox Catalysis

    by Piotr Łątka, Katarzyna Barańska, Anna Rokicińska, Bartosz Mozgawa, Marek DęBosz, Aleksandra Wesełucha‐Birczyńska, Adam Slabon, Piotr Kuśtrowski

    Lignin, a waste component of lignocellulosic biomass, can be valorized as a feedstock for chemical production. One promising approach is its electrochemical degradation under controlled conditions using a suitable electrocatalyst. However, achieving complete utilization of lignin remains challenging. In this work, residues remaining after partial electrochemical depolymerization of Kraft lignin were investigated as precursors for the preparation of activated carbon intended for adsorption and catalytic applications. The degradation process was performed for up to 360 min at –1.5 V vs. Ag/AgCl using Cu, Ag, Al, or Ni electrocatalysts in the presence of potassium carbonate, which remained in the material after the process and could subsequently act as a chemical activating agent during carbonization at 850°C for 4 h. As a result, the obtained carbons exhibited a highly developed specific surface area and micro/mesoporosity. Longer electrochemical exposure produced materials with more ordered stacked‐layer structures, an increased mesopore volume, and a reduced content of surface oxygen functional groups. Nevertheless, these changes did not diminish their effectiveness in the adsorption of phenol from aqueous solutions or the catalytic oxidation of sulfurous acid to sulfuric acid. The catalytic activity could be further enhanced by nitrogen doping introduced by gas‐phase NH 3 treatment.

  • Active N ‐Hydroxyphthalimide Species Confined in Silica Mesopores With Tunable Size and Architecture for Selective Aerobic Oxidation of Methyl‐Substituted Aromatics

    by Piotr Łątka, Tomasz Berniak, Bartosz Mozgawa, Marek Drozdek, Anna Rokicińska, Antonio Leyva‐Pérez, Piotr Kuśtrowski

    This study focused on the development of immobilized N ‐hydroxyphthalimide (NHPI) species anchored to mesoporous silicas as catalysts for the aerobic oxidation of hydrocarbons and their derivatives. Four types of SiO 2 with distinct textural properties were employed in the grafting process, that is, commercial silica gel, as well as MCM‐41, MCM‐48, and SBA‐15 synthesized by templating methods. 4‐(Chlorodimethylsilyl)phthalic anhydride was first anchored to their surfaces and subsequently converted into the catalytically active NHPI form. The formation of active centers was confirmed by scanning electron microscope‐energy dispersive x‐ray spectroscopy (SEM‐EDS), Fourier transform infrared (FT‐IR), NMR, and x‐ray photoelectron spectroscopy (XPS) measurements. Despite the highest concentration of surface silanol groups, silica gel yielded the lowest content of active sites compared to the other supports, which was attributed to differences in porosity that consequently determined the catalytic performance of the investigated materials. The catalysts showed high activity and selectivity in the aerobic conversion of various organic substrates, particularly aromatic hydrocarbons bearing two or three methyl substituents on the ring, which were predominantly transformed into the corresponding monocarboxylic derivatives. In the presence of the most active catalyst with NHPI species anchored on the MCM‐48 surface and Co 2+ acting as an efficient cocatalyst, a 59.4% conversion of p ‐xylene was achieved after 24 h at 80°C, with a selectivity toward 4‐toluic acid of 95.9%. The role of the cocatalyst was explained as enhancing NHPI performance by facilitating molecular oxygen activation and the generation of phthalimide N ‐oxyl (PINO) radicals. Combined experimental and DFT studies indicated that the initial hydrogen abstraction from the aromatic substrate is most likely the rate‐limiting step of the reaction.

  • Open Access

    First-Principles Thermodynamic Background of the Comprehensive Reaction Network of NO Oxidation over CuSSZ-13 Catalysts─Influence of Copper Speciation and Interpretation of TPD and TPSR Profiles

    by Bartosz Mozgawa, Filip Zasada, Monika Fedyna, Kinga Góra-Marek, Chengyang Yin, Zhen Zhao, Zbigniew Sojka, Piotr Pietrzyk

    A thorough molecular DFT modeling coupled with first-principles thermodynamic (FPT), spectroscopic (EPR/IR), and catalytic investigations into a complex network of reactions involved in the interaction of NO and O2 with a comprehensive variety of active centers present in the CuSSZ-13 zeolites (Cu2+, Cu+, Cu2+-OH-, Cu2+-O2--Cu2+, Cu2+-O2 2--Cu2+, and segregated CuO) were carried out. The molecular structure, energetics, and electronic and magnetic properties of the identified profuse adspecies and intermediates were ascertained. Their thermal stability and reactivity at a wide range of experimental conditions were interpreted by using the constructed thermodynamic ΔG(p,T) diagrams. The course of selective catalytic oxidation of NO (NO-SCO) with 16O2 or 18O2 was examined by a temperature-programmed surface reaction (TPSR) using two types of CuSSZ-13 catalysts of intentionally diverse copper speciation. The results obtained, supported by the corroborative IR and EPR measurements, revealed multiple molecular pathways of the NO and O2 interactions with the single (Cu2+, Cu+, Cu2+-OH-) and dual (Cu2+-O2--Cu2+, Cu2+-O2 2--Cu2+) copper centers of the 6MR and 8MR topologies and with segregated CuO. The complex reaction network and temperature behavior of the critical intermediates (HONO, nitrate, and nitrite), and their evolvement routes into NO2, were rationalized using the calculated FPT thermodynamic profiles. The unraveled reactions were classified into metal (cationic) redox, ligand (anionic) redox, and HONO redox cycles. The Cu2+-OH- species were identified as prime active centers for the formation of NO2 via the HONO pathway. The elusive HONO intermediates allow for chemical communication between the individual redox cycles. Depending on the actual reaction conditions, HONO can act as a reduction agent for Cu2+ with the electroprotic formation of NO2, a source of nitrites upon deprotonation, or as an oxidant of Cu+ with the formation of H2O and NO. For the metal redox pathway, a significant difference in the reactivity between the Cu2+ cations accommodated in the 6MRs and 8MRs was observed, with the Cu2+/6MR being spectators and the Cu2+/8MR active species. Dimeric copper centers with bridging oxo and peroxy moieties can produce a variety of nitrates and nitrites via ligand redox mechanisms. Segregated CuO nanocrystals contribute to NO oxidation only at high temperatures (T > 400 °C), leading to the isotopic scrambling of 18O-labeled oxygen and nitric oxide. The established complex reaction network was successfully used to clarify the temperature dependence of the experimental NO-SCO profiles, also providing a suitable mechanistic background for interpreting the nature of the oxidative half-cycle of the selective catalytic reduction of NO over Cu-SSZ-13 catalysts.


  • Open Access

    Tunable Generation of Reactive Oxygen Species in SnO2/SnS2 Nanostructures: Mechanistic Insights into Indigo Carmine Photodegradation

    by Kinga Michalec, Bartosz Mozgawa, Anna Kusior, Piotr Pietrzyk, Zbigniew Sojka, Marta Radecka


  • Design, Synthesis, and Insights into the Redox Mechanism of Highly Efficient One-Pot Cu-ZSM-5 Catalysts for the Reduction of NOx by NH3-SCR at Low Temperatures

    by Chengming Zhong, Yu Ren, Chengyang Yin, Ruidan Wang, Jia Hou, Lanyi Wang, Zhen Zhao, Bartosz Mozgawa, Piotr Pietrzyk, Zbigniew Sojka, et al.


  • Intermolecular interactions of tetracyanoethylene (TCNE) and fumaronitrile (FN) with minor amines: A combined UV–Vis and EPR study

    by Andrzej J. Kałka, Bartosz Mozgawa, Piotr Pietrzyk, Andrzej M. Turek

    In the paper, the nature of interactions between two cyanocarbons - tetracyanoethylene (TCNE) and fumaronitrile (FN) - and a series of four secondary amines possessing a general formula C4HxN (x = 5-11) is thoroughly scrutinized. For all of the TCNE-amine pairs tricyanovinylation (TCV) reaction is observed, however only for pyrrole it is accompanied with a visible charge-transfer (CT) complex formation - no such individuals, characteristic for TCNE, have been noticed for aliphatic and alicyclic amines. On the contrary, fumaronitrile forms such complexes with all the amines studied. Interestingly, a rather unexpected reaction of FN with alicyclic amines has been observed. The recorded EPR spectra indicate the presence of both TCNE●- and FN●- radicals in the analyzed samples, assigned to a complete charge (electron) transfer process within the CT complexes, which efficiency can be additionally enhanced by photoirradiation. The origination of the former radical, whose presence is observed also in TCNE-diethylamine mixture, is as well proposed to result indirectly from tricyanovinylation reaction, occurring for this system. Finally, the superhyperfine structure of EPR spectra, indicating the existence of some secondary interactions of the radicals with surrounding compounds, is discussed. Formation of charge-transfer complexes and tricyanovinylates have been investigated and characterized with UV-Vis spectroscopy, while presence of (cyano)radicals in the analyzed mixtures has been evidenced by (photoinduced) electron paramagnetic resonance (EPR) measurements. Interpretation of the experimental results is also supplemented with computer simulations including DFT calculations.


  • Analysis of NH3‐TPD Profiles for CuSSZ‐13 SCR Catalyst of Controlled Al Distribution – Complexity Resolved by First Principles Thermodynamics of NH3Desorption, IR and EPR Insight into Cu Speciation**

    by Bartosz Mozgawa, Filip Zasada, Monika Fedyna, Kinga Góra‐Marek, Edyta Tabor, Kinga Mlekodaj, Jiří Dědeček, Zhen Zhao, Piotr Pietrzyk, Zbigniew Sojka

    NH3temperature‐programmed desorption (NH3‐TPD) is frequently used for probing the nature of the active sites in CuSSZ‐13 zeolite for selective catalytic reduction (SCR) of NOx. Herein, we propose an interpretation of NH3‐TPD results, which takes into account the temperature‐induced dynamics of NH3interaction with the active centers. It is based on a comprehensive DFT/GGA+D and first‐principles thermodynamic (FPT) modeling of NH3adsorption on single Cu2+, Cu+, [CuOH]+centers, dimeric [Cu‐O‐Cu]2+, [Cu‐O22−‐Cu]2species, segregated CuO nanocrystals and Brønsted acid sites (BAS). Theoretical TPD profiles are compared with the experimental data measured for samples of various Si/Al ratios and distribution of Al within the zeolite framework. Copper reduction, its relocation, followed by the intrazeolite olation/oxolation processes, which are concomitant with NH3desorption, were revealed by electron paramagnetic resonance (EPR) and IR. DFT/FPT results show that the peaks in the desorption profiles cannot be assigned univocally to the particular Cu and BAS centers, since the observed low‐, medium‐ and high‐temperature desorption bands have contributions coming from several species, which dynamically change their speciation and redox states during NH3‐TPD experiment. Thus, a rigorous interpretation of the NH3‐TPD profiles of CuSSZ‐13 in terms of the strength and concentration of the active centers of a particular type is problematic. Nonetheless, useful connections for molecular interpretation of TPD profiles can be established between the individual component peaks and the corresponding ensembles of the adsorption centers.