Rogerio Pirk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Rogerio Pirk has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Carlos D Andrade Souto
Instituto de Aeronáutica e Espaço, Brasil
2 shared publications - Anderson Govertz
Instituto Tecnológico de Aeronáutica, Brazil
1 shared publication - Edilson Alexandre Camargo
Centro Tecnico Aeroespacial (Brazil)
1 shared publication - Fernando Augusto Catalano Fernandes
Instituto Tecnológico de Aeronáutica, Brazil
1 shared publication - Guilherme Coelho da Silva Stanisce Corrêa
Technological Institute of Aeronautics, Sao Paulo, BRAZIL
1 shared publication - Gustavo Paulinelli Guimarães
Department of Mechanical Engineering, Federal University of Ouro Preto, Ouro Preto, Brazil
1 shared publication
Latest Publications
- Open Access
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 17, e0525
Evaluation of a Wireless Data Transmission Using a Low-Cost Commercial-off-the-Shelf Wi-Fi Router Applied to Dynamic Tests
The use of non-intrusive instrumentation has been growing in different scenarios in the industry. In the aerospace field, non-intrusive or hybrid instrumentation approaches have demonstrated robustness and viability, presenting significant advantages such as mass reduction of space vehicles, flexibility, and reduction of instrumentation lead time. This work presents a brief overview of a hybrid instrumentation system, in which the Wi-Fi standard communication protocol is highlighted. As a case study, the experimental structural modal analysis technique was adopted to show the technical advantages of using this promising data acquisition (DAq) system. To achieve this, test data were acquired using the traditional wired method between sensors, DAq, and the computer, as well as a wireless transmission protocol, via Wi-Fi, between the DAq and the computer. The comparisons of the results of the modal analysis experiments showed good agreement, indicating the Wi-Fi communication protocol is suitable and reliable for the tested scenario.
- 1 January 2025
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 17, e0525
Open AccessEvaluation of a Wireless Data Transmission Using a Low-Cost Commercial-off-the-Shelf Wi-Fi Router Applied to Dynamic Tests
The use of non-intrusive instrumentation has been growing in different scenarios in the industry. In the aerospace field, non-intrusive or hybrid instrumentation approaches have demonstrated robustness and viability, presenting significant advantages such as mass reduction of space vehicles, flexibility, and reduction of instrumentation lead time. This work presents a brief overview of a hybrid instrumentation system, in which the Wi-Fi standard communication protocol is highlighted. As a case study, the experimental structural modal analysis technique was adopted to show the technical advantages of using this promising data acquisition (DAq) system. To achieve this, test data were acquired using the traditional wired method between sensors, DAq, and the computer, as well as a wireless transmission protocol, via Wi-Fi, between the DAq and the computer. The comparisons of the results of the modal analysis experiments showed good agreement, indicating the Wi-Fi communication protocol is suitable and reliable for the tested scenario.
- Open Access
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 14
Static Firing Tests of Solid Propellant Rocket Motors: Uncertainty Levels of Thrust Measurements
- 1 January 2022
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 14
Open AccessStatic Firing Tests of Solid Propellant Rocket Motors: Uncertainty Levels of Thrust Measurements
- Open Access
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 13
Investigations on Complex Acoustic Modes of Rocket Engines Combustion Chambers for Damping Allocation
Combustion instability can severely impair the operation of many kinds of combustion engines. Acoustic resonators are widely used to suppress the pressure oscillations caused by the coupling between the combustion process and the combustion chamber acoustic modes. Combustion chambers with subsonic flow in its inlets and outlets, like gas turbine combustors, exhibit some acoustical damping due to the presence of openings. In such chambers, the acoustic modes are complex. In a complex mode, the antinode regions can be shifted from its position in the corresponding real mode. In this work an experimental acoustic modal analysis of a cavity with an opening was performed. Acoustic frequency response functions were obtained by using a volume acceleration source, a microphone and a data acquisition system. The PolyMAX algorithm was used to estimate longitudinal modes in its real and complex versions. A comparison was performed and the results show that, for some modes, the antinode region placement could change reasonably. This suggests that the use of complex modes for location of antinode regions provides more accurate results and consequently could be a better way to identify positions, where resonators provide maximum damping in order to minimize combustion instability in subsonic combustion chambers.
- 1 January 2021
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 13
Open AccessInvestigations on Complex Acoustic Modes of Rocket Engines Combustion Chambers for Damping Allocation
Combustion instability can severely impair the operation of many kinds of combustion engines. Acoustic resonators are widely used to suppress the pressure oscillations caused by the coupling between the combustion process and the combustion chamber acoustic modes. Combustion chambers with subsonic flow in its inlets and outlets, like gas turbine combustors, exhibit some acoustical damping due to the presence of openings. In such chambers, the acoustic modes are complex. In a complex mode, the antinode regions can be shifted from its position in the corresponding real mode. In this work an experimental acoustic modal analysis of a cavity with an opening was performed. Acoustic frequency response functions were obtained by using a volume acceleration source, a microphone and a data acquisition system. The PolyMAX algorithm was used to estimate longitudinal modes in its real and complex versions. A comparison was performed and the results show that, for some modes, the antinode region placement could change reasonably. This suggests that the use of complex modes for location of antinode regions provides more accurate results and consequently could be a better way to identify positions, where resonators provide maximum damping in order to minimize combustion instability in subsonic combustion chambers.
- Open Access
- 17 January 2020
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 12 (12)
Launching Vehicle Acoustic Data Compression Study Using Lossy Audio Formats
The field of data compression has evolved over the last decades. In this way, several techniques to reduce the amount of acquired data from the sensor required to be transmitted have been developed. Those techniques are usually classified by lossless or lossy, where, for the lossless techniques, all acquired data is recovered, while the lossy techniques introduce errors to these data. Each of these techniques presents advantages and drawbacks, being the analyst responsible for choosing the appropriate technique for a specific application. This work presents a comparative study using lossy audio formats to be applied on a launch vehicle on-board acoustic data. The Opus format achieved a higher compression rate in comparison with standard compression techniques by saving up to 254 times the required amount of data to be transmitted through a telemetry link on launcher vehicle, and the lowest discrepancy from original data measured by the mean square error metric.
- 17 January 2020
- Published by FapUNIFESP (SciELO) in Journal of Aerospace Technology and Management
- Vol. 12 (12)
Open AccessLaunching Vehicle Acoustic Data Compression Study Using Lossy Audio Formats
The field of data compression has evolved over the last decades. In this way, several techniques to reduce the amount of acquired data from the sensor required to be transmitted have been developed. Those techniques are usually classified by lossless or lossy, where, for the lossless techniques, all acquired data is recovered, while the lossy techniques introduce errors to these data. Each of these techniques presents advantages and drawbacks, being the analyst responsible for choosing the appropriate technique for a specific application. This work presents a comparative study using lossy audio formats to be applied on a launch vehicle on-board acoustic data. The Opus format achieved a higher compression rate in comparison with standard compression techniques by saving up to 254 times the required amount of data to be transmitted through a telemetry link on launcher vehicle, and the lowest discrepancy from original data measured by the mean square error metric.