Daria Vyacheslavovna Beznasyuk
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Daria Vyacheslavovna Beznasyuk has a total of 46 co-authors. Here are the top co-authors by number of shared publications:
- Jordi Arbiol
Catalan Institute of Nanoscience and Nanotechnology ‐ ICN2 (CSIC and BIST) Barcelona Spain
4 shared publications Sara Martí-Sánchez
Catalan Institute of Nanoscience and Nanotechnology (ICN2), CSIC and BIST 2 , Campus UAB, Bellaterra, Barcelona, Catalonia
4 shared publications- Alexei D. Bouravleuv
St.Petersburg Academic University, St.Petersburg, RUSSIAN FEDERATION
3 shared publications - Damon James Carrad
Department of Energy Conversion and Storage, Technical University of Denmark, 2800 Kgs. Lyngby, Denmark
3 shared publications - Georgii E. Cirlin
Faculty of Physics, St. Petersburg State University, Universitetskaya Emb. 13B, St. Petersburg 199034, Russia
3 shared publications - Thomas Sand Jespersen
Technical University of Denmark
3 shared publications
Latest Publications
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Axial GaAs/InAs nanowire heterostructures for photonic applications on Si
Nanofils à hétérostructures axiales GaAs/InAs pour applications photoniques sur Si: Un objectif technologique important de l’industrie des semiconducteurs concerne l’intégration sur Si de semiconducteurs III-V à bande interdite directe tels que InAs et GaAs, pour réaliser des émetteurs et détecteurs de lumière aux longueurs d'onde de télécommunication. L'épitaxie de couches minces d'InAs et de GaAs sur Si est cependant difficile en raison de la grande différence de paramètre de maille entre ces matériaux. Ces films minces épitaxiés présentent une interface de mauvaise qualité limitant les performances de futurs dispositifs. Pour surmonter le défi de l’épitaxie de matériaux à fort désaccord de maille, il a été proposé d’utiliser des nanofils en raison de leur dimension latérale réduite et de leur rapport hauteur/largeur élevé. Ainsi, les nanofils relâchent la contrainte par relaxation élastique sur la paroi latérale des nanofils. Dans ce contexte, ma thèse visait à faire croître des hétérostructures axiales de nanofils GaAs/InAs sur des substrats Si pour réaliser des émetteurs à photons uniques. Lors de ce travail expérimental, j'ai fait croître des nanofils par le mécanisme vapeur-solide-liquide assisté par catalyseurs d'or dans un réacteur d'épitaxie par jet moléculaire. Les nanofils ont ensuite été caractérisés en utilisant la spectroscopie à rayons X par dispersion d'énergie et la microscopie électronique à transmission pour évaluer leur composition et leur structure cristalline. La distribution de la contrainte a été étudiée expérimentalement par analyse de phase géométrique, puis comparée à des simulations par éléments finis. Au cours de cette thèse, j'ai abordé différents défis inhérents aux hétérostructures axiales de nanofils, tels que la formation de nanofils tordus, la composition graduelle de l’interface et la croissance radiale parasite. J'ai d'abord optimisé le protocole de croissance pour éviter la formation de nanofils tordus. Les nanofils changent habituellement de direction de croissance lorsque le catalyseur d'or à l'extrémité du nanofil a été déstabilisé. En gardant une forte sursaturation dans la gouttelette d'or pendant toute la procédure de croissance, j’ai obtenu des nanofils droits d’InAs/GaAs avec un rendement de 92%. J’ai alors optimisé les flux de matériaux pour réduire la composition graduelle de l'interface entre les segments d’InAs et de GaAs. Grâce à l'analyse de la composition chimique des nanofils, j'ai observé que le segment nominalement pur d’InAs est en fait un alliage ternaire InxGa1-xAs. J'ai découvert que l'incorporation de Ga dans le segment nominal InAs est due à la diffusion d'adatomes Ga créés thermiquement sur les nanofils GaAs et sur la couche de GaAs bidimensionnelle développée sur le substrat de Si. L'utilisation de diamètres larges de nanofils supprime la diffusion de Ga le long des parois latérales des nanofils, permettant ainsi la croissance d’un segment d’InAs pur au-dessus de celui de GaAs. Enfin, j'ai étudié la distribution de la contrainte de 7% à l’interface InAs/GaAs. Celle-ci est répartie le long du nanofil et dépend du diamètre du nanofil et de la composition de l'interface. J'ai observé que les nanofils de diamètre inférieur à 40 nm sont exempts de dislocations: la contrainte est relaxée élastiquement via la courbure des plans cristallins proches des parois latérales du nanofil. D'autre part, les nanofils avec des diamètres supérieurs à 95 nm relaxent à la fois élastiquement et plastiquement, par une courbure des plans et la formation de dislocations. En conclusion, j'ai fabriqué des hétérostructures de matériaux à fort désaccord de maille. J’ai pu confirmer que les interfaces axiales GaAs/InAs sont pseudomorphiques en dessous d'un certain diamètre critique. Ces résultats constituent une première étape vers la réalisation de boîtes quantiques InAs dans des nanofils de GaAs intégrés sur Si: un système prometteur pour l'émission de photons uniques sur puce.
- 3 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Axial GaAs/InAs nanowire heterostructures for photonic applications on Si
Nanofils à hétérostructures axiales GaAs/InAs pour applications photoniques sur Si: Un objectif technologique important de l’industrie des semiconducteurs concerne l’intégration sur Si de semiconducteurs III-V à bande interdite directe tels que InAs et GaAs, pour réaliser des émetteurs et détecteurs de lumière aux longueurs d'onde de télécommunication. L'épitaxie de couches minces d'InAs et de GaAs sur Si est cependant difficile en raison de la grande différence de paramètre de maille entre ces matériaux. Ces films minces épitaxiés présentent une interface de mauvaise qualité limitant les performances de futurs dispositifs. Pour surmonter le défi de l’épitaxie de matériaux à fort désaccord de maille, il a été proposé d’utiliser des nanofils en raison de leur dimension latérale réduite et de leur rapport hauteur/largeur élevé. Ainsi, les nanofils relâchent la contrainte par relaxation élastique sur la paroi latérale des nanofils. Dans ce contexte, ma thèse visait à faire croître des hétérostructures axiales de nanofils GaAs/InAs sur des substrats Si pour réaliser des émetteurs à photons uniques. Lors de ce travail expérimental, j'ai fait croître des nanofils par le mécanisme vapeur-solide-liquide assisté par catalyseurs d'or dans un réacteur d'épitaxie par jet moléculaire. Les nanofils ont ensuite été caractérisés en utilisant la spectroscopie à rayons X par dispersion d'énergie et la microscopie électronique à transmission pour évaluer leur composition et leur structure cristalline. La distribution de la contrainte a été étudiée expérimentalement par analyse de phase géométrique, puis comparée à des simulations par éléments finis. Au cours de cette thèse, j'ai abordé différents défis inhérents aux hétérostructures axiales de nanofils, tels que la formation de nanofils tordus, la composition graduelle de l’interface et la croissance radiale parasite. J'ai d'abord optimisé le protocole de croissance pour éviter la formation de nanofils tordus. Les nanofils changent habituellement de direction de croissance lorsque le catalyseur d'or à l'extrémité du nanofil a été déstabilisé. En gardant une forte sursaturation dans la gouttelette d'or pendant toute la procédure de croissance, j’ai obtenu des nanofils droits d’InAs/GaAs avec un rendement de 92%. J’ai alors optimisé les flux de matériaux pour réduire la composition graduelle de l'interface entre les segments d’InAs et de GaAs. Grâce à l'analyse de la composition chimique des nanofils, j'ai observé que le segment nominalement pur d’InAs est en fait un alliage ternaire InxGa1-xAs. J'ai découvert que l'incorporation de Ga dans le segment nominal InAs est due à la diffusion d'adatomes Ga créés thermiquement sur les nanofils GaAs et sur la couche de GaAs bidimensionnelle développée sur le substrat de Si. L'utilisation de diamètres larges de nanofils supprime la diffusion de Ga le long des parois latérales des nanofils, permettant ainsi la croissance d’un segment d’InAs pur au-dessus de celui de GaAs. Enfin, j'ai étudié la distribution de la contrainte de 7% à l’interface InAs/GaAs. Celle-ci est répartie le long du nanofil et dépend du diamètre du nanofil et de la composition de l'interface. J'ai observé que les nanofils de diamètre inférieur à 40 nm sont exempts de dislocations: la contrainte est relaxée élastiquement via la courbure des plans cristallins proches des parois latérales du nanofil. D'autre part, les nanofils avec des diamètres supérieurs à 95 nm relaxent à la fois élastiquement et plastiquement, par une courbure des plans et la formation de dislocations. En conclusion, j'ai fabriqué des hétérostructures de matériaux à fort désaccord de maille. J’ai pu confirmer que les interfaces axiales GaAs/InAs sont pseudomorphiques en dessous d'un certain diamètre critique. Ces résultats constituent une première étape vers la réalisation de boîtes quantiques InAs dans des nanofils de GaAs intégrés sur Si: un système prometteur pour l'émission de photons uniques sur puce.
- 10 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (19)
Cryogenic performance of field-effect transistors and amplifiers based on selective area grown InAs nanowires
Indium-arsenide nanowire field-effect transistors (NWFETs) are promising platforms for high-speed, low-power nanoelectronics operating at cryogenic conditions, relevant for quantum information processing. We use selective area growth of nanowires to realize scalable and planar nanowire device geometries that are compatible with standard semiconductor processing techniques. NWFETs are fabricated, and their low temperature characteristics, including ION/IOFF ratios, threshold voltages, sub-threshold slope, interfacial trap density, hysteresis, and mobility, are characterized. The NWFETs operate effectively in integrated circuitry relying on saturation-mode operation. In sub-threshold applications such as amplifiers, we find bandwidths exceeding our cryostat wiring, but the gate hysteresis presents challenges for precise tuning of the amplifier operating point. We discuss the role of crystal imperfections and fabrication processes on the transistor characteristics and propose strategies for further improvements.
- 10 November 2025
- Published by AIP Publishing in Applied Physics Letters
- Vol. 127 (19)
Cryogenic performance of field-effect transistors and amplifiers based on selective area grown InAs nanowires
Indium-arsenide nanowire field-effect transistors (NWFETs) are promising platforms for high-speed, low-power nanoelectronics operating at cryogenic conditions, relevant for quantum information processing. We use selective area growth of nanowires to realize scalable and planar nanowire device geometries that are compatible with standard semiconductor processing techniques. NWFETs are fabricated, and their low temperature characteristics, including ION/IOFF ratios, threshold voltages, sub-threshold slope, interfacial trap density, hysteresis, and mobility, are characterized. The NWFETs operate effectively in integrated circuitry relying on saturation-mode operation. In sub-threshold applications such as amplifiers, we find bandwidths exceeding our cryostat wiring, but the gate hysteresis presents challenges for precise tuning of the amplifier operating point. We discuss the role of crystal imperfections and fabrication processes on the transistor characteristics and propose strategies for further improvements.
- 1 November 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (45) , 14198-14205
Scale-Dependent Growth Modes of Selective Area Grown III–V Nanowires
Due to their flexible geometry, in-plane selective area grown (SAG) nanowires (NWs) encompass the advantages of vapor-liquid-solid NWs and planar structures. The complex interplay of growth kinetics and NW dimensions provides new pathways for crystal engineering; however, their growth mechanisms remain poorly understood. We analyze the growth mechanisms of GaAs(Sb) and InGaAs/GaAs(Sb) in-plane SAG NWs using molecular beam epitaxy (MBE). While GaAs(Sb) NWs consistently follow a layer-by-layer growth, the InGaAs/GaAs(Sb) growth transitions from step-flow to layer-by-layer and layer-plus-island depending on the InGaAs thickness and the NW dimensions. We extract the diffusion lengths of Ga adatoms along the [11̅0] and [110] directions under As2 during GaAs(Sb) growth. Our results indicate that Sb may inhibit the layer-by-layer to step-flow transition. Our findings show that different growth modes can be achieved in the MBE of in-plane SAG NWs grown on the same substrate and highlight the importance of the interplay with NW dimensions.
- 1 November 2024
- Published by American Chemical Society (ACS) in Nano Letters
- Vol. 24 (45) , 14198-14205
Scale-Dependent Growth Modes of Selective Area Grown III–V Nanowires
Due to their flexible geometry, in-plane selective area grown (SAG) nanowires (NWs) encompass the advantages of vapor-liquid-solid NWs and planar structures. The complex interplay of growth kinetics and NW dimensions provides new pathways for crystal engineering; however, their growth mechanisms remain poorly understood. We analyze the growth mechanisms of GaAs(Sb) and InGaAs/GaAs(Sb) in-plane SAG NWs using molecular beam epitaxy (MBE). While GaAs(Sb) NWs consistently follow a layer-by-layer growth, the InGaAs/GaAs(Sb) growth transitions from step-flow to layer-by-layer and layer-plus-island depending on the InGaAs thickness and the NW dimensions. We extract the diffusion lengths of Ga adatoms along the [11̅0] and [110] directions under As2 during GaAs(Sb) growth. Our results indicate that Sb may inhibit the layer-by-layer to step-flow transition. Our findings show that different growth modes can be achieved in the MBE of in-plane SAG NWs grown on the same substrate and highlight the importance of the interplay with NW dimensions.
- Open Access
- 25 November 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-7
Cryogenic multiplexing using selective area grown nanowires
Bottom-up grown nanomaterials play an integral role in the development of quantum technologies but are often challenging to characterise on large scales. Here, we harness selective area growth of semiconductor nanowires to demonstrate large-scale integrated circuits and characterisation of large numbers of quantum devices. The circuit consisted of 512 quantum devices embedded within multiplexer/demultiplexer pairs, incorporating thousands of interconnected selective area growth nanowires operating under deep cryogenic conditions. Multiplexers enable a range of new strategies in quantum device research and scaling by increasing the device count while limiting the number of connections between room-temperature control electronics and the cryogenic samples. As an example of this potential we perform a statistical characterization of large arrays of identical quantum dots thus establishing the feasibility of applying cross-bar gating strategies for efficient scaling of future selective area growth quantum circuits. More broadly, the ability to systematically characterise large numbers of devices provides new levels of statistical certainty to materials/device development.
- 25 November 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-7
Open AccessCryogenic multiplexing using selective area grown nanowires
Bottom-up grown nanomaterials play an integral role in the development of quantum technologies but are often challenging to characterise on large scales. Here, we harness selective area growth of semiconductor nanowires to demonstrate large-scale integrated circuits and characterisation of large numbers of quantum devices. The circuit consisted of 512 quantum devices embedded within multiplexer/demultiplexer pairs, incorporating thousands of interconnected selective area growth nanowires operating under deep cryogenic conditions. Multiplexers enable a range of new strategies in quantum device research and scaling by increasing the device count while limiting the number of connections between room-temperature control electronics and the cryogenic samples. As an example of this potential we perform a statistical characterization of large arrays of identical quantum dots thus establishing the feasibility of applying cross-bar gating strategies for efficient scaling of future selective area growth quantum circuits. More broadly, the ability to systematically characterise large numbers of devices provides new levels of statistical certainty to materials/device development.
- 16 March 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (3) , 034602
Doubling the mobility of InAs/InGaAs selective area grown nanowires
Selective area growth (SAG) of nanowires and networks promise a route toward scalable electronics, photonics, and quantum devices based on III-V semiconductor materials. The potential of high-mobility SAG nanowires however is not yet fully realised, since interfacial roughness, misfit dislocations at the nanowire/substrate interface and nonuniform composition due to material intermixing all scatter electrons. Here, we explore SAG of highly lattice-mismatched InAs nanowires on insulating GaAs(001) substrates and address these key challenges. Atomically smooth nanowire/substrate interfaces are achieved with the use of atomic hydrogen (a-H) as an alternative to conventional thermal annealing for the native oxide removal. The problem of high lattice mismatch is addressed through an buffer layer introduced between the InAs transport channel and the GaAs substrate. The Ga-In material intermixing observed in both the buffer layer and the channel is inhibited via careful tuning of the growth temperature. Performing scanning transmission electron microscopy and x-ray diffraction analysis along with low-temperature transport measurements we show that optimized In-rich buffer layers promote high-quality InAs transport channels with the field-effect electron mobility over 10 000 . This is twice as high as for nonoptimized samples and among the highest reported for InAs selective area grown nanostructures.- 16 March 2022
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 6 (3) , 034602
Doubling the mobility of InAs/InGaAs selective area grown nanowires
Selective area growth (SAG) of nanowires and networks promise a route toward scalable electronics, photonics, and quantum devices based on III-V semiconductor materials. The potential of high-mobility SAG nanowires however is not yet fully realised, since interfacial roughness, misfit dislocations at the nanowire/substrate interface and nonuniform composition due to material intermixing all scatter electrons. Here, we explore SAG of highly lattice-mismatched InAs nanowires on insulating GaAs(001) substrates and address these key challenges. Atomically smooth nanowire/substrate interfaces are achieved with the use of atomic hydrogen (a-H) as an alternative to conventional thermal annealing for the native oxide removal. The problem of high lattice mismatch is addressed through an buffer layer introduced between the InAs transport channel and the GaAs substrate. The Ga-In material intermixing observed in both the buffer layer and the channel is inhibited via careful tuning of the growth temperature. Performing scanning transmission electron microscopy and x-ray diffraction analysis along with low-temperature transport measurements we show that optimized In-rich buffer layers promote high-quality InAs transport channels with the field-effect electron mobility over 10 000 . This is twice as high as for nonoptimized samples and among the highest reported for InAs selective area grown nanostructures.- 28 July 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (7) , 074607
Full characterization and modeling of graded interfaces in a high lattice-mismatch axial nanowire heterostructure
Controlling the strain level in nanowire heterostructures is critical for obtaining coherent interfaces of high crystalline quality and for the setting of functional properties such as photon emission, carrier mobility, or piezoelectricity. In a nanowire axial heterostructure featuring a sharp interface, strain is set by the materials lattice mismatch and the nanowire radius. Here we show that introducing a graded interface in nanowire heterostructures offers an additional parameter to control strain. For a given interface length and lattice mismatch, we first derive theoretically the maximum nanowire radius below which coherent growth is possible. We validate these findings by growing and characterizing various In(Ga)As/GaAs nanowire heterostructures with graded interfaces. We perform chemical and structural characterization of the interface by combining energy-dispersive x-ray spectroscopy and high resolution transmission electron microscopy. In the case of coherent growth, we observe that the mismatch strain relaxes elastically on the side walls of the nanowire around the interface area, while the core of the nanowire remains partially strained. Our experimental data show good agreement with finite element calculations. In particular, this analysis confirms that mechanical strain is largely reduced by interface grading. Overall, our work extends the parameter space for the design of nanowire heterostructures, thus opening new opportunities for nanowire optoelectronics.
- 28 July 2020
- Published by American Physical Society (APS) in Physical Review Materials
- Vol. 4 (7) , 074607
Full characterization and modeling of graded interfaces in a high lattice-mismatch axial nanowire heterostructure
Controlling the strain level in nanowire heterostructures is critical for obtaining coherent interfaces of high crystalline quality and for the setting of functional properties such as photon emission, carrier mobility, or piezoelectricity. In a nanowire axial heterostructure featuring a sharp interface, strain is set by the materials lattice mismatch and the nanowire radius. Here we show that introducing a graded interface in nanowire heterostructures offers an additional parameter to control strain. For a given interface length and lattice mismatch, we first derive theoretically the maximum nanowire radius below which coherent growth is possible. We validate these findings by growing and characterizing various In(Ga)As/GaAs nanowire heterostructures with graded interfaces. We perform chemical and structural characterization of the interface by combining energy-dispersive x-ray spectroscopy and high resolution transmission electron microscopy. In the case of coherent growth, we observe that the mismatch strain relaxes elastically on the side walls of the nanowire around the interface area, while the core of the nanowire remains partially strained. Our experimental data show good agreement with finite element calculations. In particular, this analysis confirms that mechanical strain is largely reduced by interface grading. Overall, our work extends the parameter space for the design of nanowire heterostructures, thus opening new opportunities for nanowire optoelectronics.
- 14 August 2017
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (36) , 365602
Dislocation-free axial InAs-on-GaAs nanowires on silicon
We report on the growth of axial InAs-on-GaAs nanowire heterostructures on silicon by molecular beam epitaxy using 20 nm diameter Au catalysts. First, the growth parameters of the GaAs nanowire segment were optimized to achieve a pure wurtzite crystal structure. Then, we developed a two-step growth procedure to enhance the yield of vertical InAs-on-GaAs nanowires. We achieved 90% of straight InAs-on-GaAs nanowires by further optimizing the growth parameters. We investigated the composition change at the interface by energy dispersive x-ray spectroscopy and the nanowire crystal structure by transmission electron microscopy. The composition of the nominal InAs segment is found to be In x Ga 1− x As with x = 0.85 and corresponds to 6% of lattice mismatch with GaAs. Strain mapping performed by the geometrical phase analysis of high-resolution images revealed a dislocation-free GaAs/In 0.85 Ga 0.15 As interface. In conclusion, we successfully fabricated highly mismatched heterostructures, confirming the prediction that axial GaAs/In 0.85 Ga 0.15 As interfaces are pseudomorphic in nanowires with a diameter smaller than 40 nm.
- 14 August 2017
- Published by IOP Publishing in Nanotechnology
- Vol. 28 (36) , 365602
Dislocation-free axial InAs-on-GaAs nanowires on silicon
We report on the growth of axial InAs-on-GaAs nanowire heterostructures on silicon by molecular beam epitaxy using 20 nm diameter Au catalysts. First, the growth parameters of the GaAs nanowire segment were optimized to achieve a pure wurtzite crystal structure. Then, we developed a two-step growth procedure to enhance the yield of vertical InAs-on-GaAs nanowires. We achieved 90% of straight InAs-on-GaAs nanowires by further optimizing the growth parameters. We investigated the composition change at the interface by energy dispersive x-ray spectroscopy and the nanowire crystal structure by transmission electron microscopy. The composition of the nominal InAs segment is found to be In x Ga 1− x As with x = 0.85 and corresponds to 6% of lattice mismatch with GaAs. Strain mapping performed by the geometrical phase analysis of high-resolution images revealed a dislocation-free GaAs/In 0.85 Ga 0.15 As interface. In conclusion, we successfully fabricated highly mismatched heterostructures, confirming the prediction that axial GaAs/In 0.85 Ga 0.15 As interfaces are pseudomorphic in nanowires with a diameter smaller than 40 nm.
- 6 November 2013
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 55 (11) , 2229-2233
New method of determining the young’s Modulus of (Ga,Mn)As nanowhiskers with a scanning electron microscope
Arrays of (Ga,Mn)As nanowhiskers have been grown by molecular-beam epitaxy. The scanning electron microscopy study of the surface morphology of the samples has revealed the appearance of mechanical...
- 6 November 2013
- Published by Pleiades Publishing Ltd in Physics of the Solid State
- Vol. 55 (11) , 2229-2233
New method of determining the young’s Modulus of (Ga,Mn)As nanowhiskers with a scanning electron microscope
Arrays of (Ga,Mn)As nanowhiskers have been grown by molecular-beam epitaxy. The scanning electron microscopy study of the surface morphology of the samples has revealed the appearance of mechanical...
- 12 October 2013
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 47 (10) , 1416-1421
Effect of an arsenic flux on the molecular-beam epitaxy of self-catalytic (Ga,Mn)As nanowire crystals
The effect of an arsenic flux on the growth rate of self-catalytic (Ga,Mn)As nanowire crystals is studied. It is shown that, at low arsenic fluxes, nanowire-crystal growth is limited by the...
- 12 October 2013
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 47 (10) , 1416-1421
Effect of an arsenic flux on the molecular-beam epitaxy of self-catalytic (Ga,Mn)As nanowire crystals
The effect of an arsenic flux on the growth rate of self-catalytic (Ga,Mn)As nanowire crystals is studied. It is shown that, at low arsenic fluxes, nanowire-crystal growth is limited by the...
- 10 June 2013
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 47 (6) , 808-811
Photovoltaic properties of GaAs:Be nanowire arrays
Arrays of GaAs:Be nanowires are synthesized by molecular beam epitaxy on GaAs(111)B substrates. Prototypes of photovoltaic converters in which the grown nanowire arrays are used as active layers are p
- 10 June 2013
- Published by Pleiades Publishing Ltd in Semiconductors
- Vol. 47 (6) , 808-811
Photovoltaic properties of GaAs:Be nanowire arrays
Arrays of GaAs:Be nanowires are synthesized by molecular beam epitaxy on GaAs(111)B substrates. Prototypes of photovoltaic converters in which the grown nanowire arrays are used as active layers are p