Pasquale Davide Schiavone
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Pasquale Davide Schiavone has a total of 210 co-authors. Here are the top co-authors by number of shared publications:
- David Atienza
Embedded Systems Laboratory, EPFL, Lausanne, Switzerland
9 shared publications - Luca Benini
University of Bologna, Bologna, Italy
5 shared publications - Maurizio Martina
Department of Electronics and Telecommunications, Politecnico di Torino, 10129 Torino, Italy
4 shared publications - Angelo Garofalo
University of Bologna, Bologna, Italy
3 shared publications - Davide Rossi
University of Bologna
3 shared publications - Guido Masera
Department of Electronics and Telecommunications, Politecnico di Torino, 10129 Torino, Italy
3 shared publications
Latest Publications
- Open Access
- 16 November 2026
- Published by MDPI AG in Electronics
- Vol. 15 (22) , 5338
TRISTAN and ISOLDE: European Pathways to High-Performance RISC-V Systems
The pursuit of technological sovereignty is a central pillar of the European industrial strategy, driving the critical need for open-source, high-performance computing solutions that reduce reliance on proprietary intellectual property. Supported by the Chips Joint Undertaking within Horizon Europe, the TRISTAN and ISOLDE projects are at the forefront of this mission, synergizing to expand, mature, and industrialize the European RISC-V ecosystem. While TRISTAN aims to strengthen the foundational RISC-V open-source community by focusing on SoC HW and SW building blocks and a comprehensive end-to-end EDA infrastructure, ISOLDE extends this ecosystem across the entire software stack, targeting high-performance, security and safety aspects for key domains such as automotive, aerospace, and IoT. Together, these projects emphasize seamless interoperability and collaboration, sharing a unified virtual repository for IP distribution. This paper details the extensive collaborative developments of the consortium partners, highlighting their specific contributions to high-performance RISC-V architectures.
- 16 November 2026
- Published by MDPI AG in Electronics
- Vol. 15 (22) , 5338
Open AccessTRISTAN and ISOLDE: European Pathways to High-Performance RISC-V Systems
The pursuit of technological sovereignty is a central pillar of the European industrial strategy, driving the critical need for open-source, high-performance computing solutions that reduce reliance on proprietary intellectual property. Supported by the Chips Joint Undertaking within Horizon Europe, the TRISTAN and ISOLDE projects are at the forefront of this mission, synergizing to expand, mature, and industrialize the European RISC-V ecosystem. While TRISTAN aims to strengthen the foundational RISC-V open-source community by focusing on SoC HW and SW building blocks and a comprehensive end-to-end EDA infrastructure, ISOLDE extends this ecosystem across the entire software stack, targeting high-performance, security and safety aspects for key domains such as automotive, aerospace, and IoT. Together, these projects emphasize seamless interoperability and collaboration, sharing a unified virtual repository for IP distribution. This paper details the extensive collaborative developments of the consortium partners, highlighting their specific contributions to high-performance RISC-V architectures.
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 423-430
Forging Robust Building Blocks for Next-Gen RISC-V Chips: Virtual Repository and IP Card
- 1 September 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 423-430
Forging Robust Building Blocks for Next-Gen RISC-V Chips: Virtual Repository and IP Card
- Open Access
- 5 August 2026
- Published by Association for Computing Machinery (ACM)
- p. 1-7
Application-Driven System Technology Co-Optimization for 2.5D Edge AI Platforms
- 5 August 2026
- Published by Association for Computing Machinery (ACM)
- p. 1-7
Open AccessApplication-Driven System Technology Co-Optimization for 2.5D Edge AI Platforms
- Top Cited Papers
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems for Artificial Intelligence
- Vol. 3 (2) , 142-151
Increasing the Energy Efficiency of Wearables Using Low-Precision Posit Arithmetic With PHEE
Wearable edge AI biomedical devices are increasingly being used for continuous patient health monitoring, enabling real-time insights and extended data collection without the need for prolonged hospital stays. These devices must be energy efficient to minimize battery size, improve comfort, and reduce recharging intervals. This paper investigates the use of specialized low-precision arithmetic formats to enhance the energy efficiency of edge AI biomedical wearables. Specifically, we explore posit arithmetic, a floating-point-like representation, in two biomedical applications that leverage supervised and unsupervised learning algorithms: cough detection for chronic cough monitoring and R peak detection in ECG analysis. Our results reveal that 16-bit posits can replace 32-bit IEEE 754 floating point numbers with minimal accuracy loss in cough detection. For R peak detection, posit arithmetic achieves satisfactory accuracy with as few as 10 or 8 bits, compared to the 16-bit requirement for floating-point formats. To validate these findings beyond algorithm-level simulations, we introduce PHEE, a modular and extensible architecture that integrates the Coprosit posit coprocessor within a RISC-V based system. Using the X-HEEP framework, PHEE serves as a proof-of-concept platform to quantify the practical energy benefits of low-precision posits in edge AI systems. Post-synthesis results targeting 16 nm TSMC technology show that the posit hardware targeting these ML-based biomedical applications can be 38% smaller and consume up to 42.3% less power at the functional unit level, with no performance compromise. These findings establish the potential of low-precision posit arithmetic to significantly improve the energy efficiency of edge AI biomedical devices.
- 12 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems for Artificial Intelligence
- Vol. 3 (2) , 142-151
Top Cited PapersIncreasing the Energy Efficiency of Wearables Using Low-Precision Posit Arithmetic With PHEE
Wearable edge AI biomedical devices are increasingly being used for continuous patient health monitoring, enabling real-time insights and extended data collection without the need for prolonged hospital stays. These devices must be energy efficient to minimize battery size, improve comfort, and reduce recharging intervals. This paper investigates the use of specialized low-precision arithmetic formats to enhance the energy efficiency of edge AI biomedical wearables. Specifically, we explore posit arithmetic, a floating-point-like representation, in two biomedical applications that leverage supervised and unsupervised learning algorithms: cough detection for chronic cough monitoring and R peak detection in ECG analysis. Our results reveal that 16-bit posits can replace 32-bit IEEE 754 floating point numbers with minimal accuracy loss in cough detection. For R peak detection, posit arithmetic achieves satisfactory accuracy with as few as 10 or 8 bits, compared to the 16-bit requirement for floating-point formats. To validate these findings beyond algorithm-level simulations, we introduce PHEE, a modular and extensible architecture that integrates the Coprosit posit coprocessor within a RISC-V based system. Using the X-HEEP framework, PHEE serves as a proof-of-concept platform to quantify the practical energy benefits of low-precision posits in edge AI systems. Post-synthesis results targeting 16 nm TSMC technology show that the posit hardware targeting these ML-based biomedical applications can be 38% smaller and consume up to 42.3% less power at the functional unit level, with no performance compromise. These findings establish the potential of low-precision posit arithmetic to significantly improve the energy efficiency of edge AI biomedical devices.
- Open Access
- 28 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 66-69
Quadrilatero: A RISC-V programmable matrix coprocessor for low-power edge applications
- 28 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 66-69
Open AccessQuadrilatero: A RISC-V programmable matrix coprocessor for low-power edge applications
- Open Access
- 28 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 74-77
Just TestIt! An SBST Approach To Automate System-Integration Testing
- 28 May 2025
- Published by Association for Computing Machinery (ACM)
- p. 74-77
Open AccessJust TestIt! An SBST Approach To Automate System-Integration Testing
- Top Cited Papers
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Emerging Topics in Computing
- Vol. 13 (3) , 1003-1018
Scalable and RISC-V Programmable Near-Memory Computing Architectures for Edge Nodes
The widespread adoption of data-centric algorithms, particularly Artificial Intelligence (AI) and Machine Learning (ML), has exposed the limitations of centralized processing infrastructures, driving a shift towards edge computing. This necessitates stringent constraints on energy efficiency, which traditional von Neumann architectures struggle to meet. The Compute-In-Memory (CIM) paradigm has emerged as a better candidate due to its efficient exploitation of the available memory bandwidth. However, existing CIM solutions require a high implementation effort and lack flexibility from a software integration standpoint. This work proposes a novel, software-friendly, general-purpose, and low-integration-effort Near-Memory Computing (NMC) approach, paving the way for the adoption of CIMbased systems in the next generation of edge computing nodes. Two architectural variants, NM-Caesar and NM-Carus, are proposed and characterized to target different trade-offs in area efficiency, performance, and flexibility, covering a wide range of embedded microcontrollers. Post-layout simulations show up to 28.0× and 53.9× lower execution time and 25.0× and 35.6× higher energy efficiency at system level, respectively, compared to the execution of the same tasks on a state-of-the-art RISC-V CPU (RV32IMC). NM-Carus achieves a peak energy efficiency of 306.7GOPS/W in 8-bit matrix multiplications, surpassing recent state-of-the-art in- and near-memory circuits.
- 11 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Emerging Topics in Computing
- Vol. 13 (3) , 1003-1018
Top Cited PapersScalable and RISC-V Programmable Near-Memory Computing Architectures for Edge Nodes
The widespread adoption of data-centric algorithms, particularly Artificial Intelligence (AI) and Machine Learning (ML), has exposed the limitations of centralized processing infrastructures, driving a shift towards edge computing. This necessitates stringent constraints on energy efficiency, which traditional von Neumann architectures struggle to meet. The Compute-In-Memory (CIM) paradigm has emerged as a better candidate due to its efficient exploitation of the available memory bandwidth. However, existing CIM solutions require a high implementation effort and lack flexibility from a software integration standpoint. This work proposes a novel, software-friendly, general-purpose, and low-integration-effort Near-Memory Computing (NMC) approach, paving the way for the adoption of CIMbased systems in the next generation of edge computing nodes. Two architectural variants, NM-Caesar and NM-Carus, are proposed and characterized to target different trade-offs in area efficiency, performance, and flexibility, covering a wide range of embedded microcontrollers. Post-layout simulations show up to 28.0× and 53.9× lower execution time and 25.0× and 35.6× higher energy efficiency at system level, respectively, compared to the execution of the same tasks on a state-of-the-art RISC-V CPU (RV32IMC). NM-Carus achieves a peak energy efficiency of 306.7GOPS/W in 8-bit matrix multiplications, surpassing recent state-of-the-art in- and near-memory circuits.
- 17 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Design & Test
- Vol. 42 (5) , 45-54
BiomedBench: A Benchmark Suite of TinyML Biomedical Applications for Low-Power Wearables
Editor’s notes: This article introduces BiomedBench, the first benchmark suite specifically designed for evaluating TinyML applied in the context of low-power wearable biomedical devices. BiomedBench represents a valuable step toward reproducible evaluation in wearable TinyML and will serve as a foundational benchmark suite for future research and development in this rapidly growing field. —Theocharis Theocharides, University of Cyprus, Cyprus —Marian Verhelst, KU Leuven, Belgium —Vijay Janapa Reddy, Harvard University, USA —Evgeni Gousev, Qualcomm, USA
- 17 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Design & Test
- Vol. 42 (5) , 45-54
BiomedBench: A Benchmark Suite of TinyML Biomedical Applications for Low-Power Wearables
Editor’s notes: This article introduces BiomedBench, the first benchmark suite specifically designed for evaluating TinyML applied in the context of low-power wearable biomedical devices. BiomedBench represents a valuable step toward reproducible evaluation in wearable TinyML and will serve as a foundational benchmark suite for future research and development in this rapidly growing field. —Theocharis Theocharides, University of Cyprus, Cyprus —Marian Verhelst, KU Leuven, Belgium —Vijay Janapa Reddy, Harvard University, USA —Evgeni Gousev, Qualcomm, USA
- Open Access
- 5 August 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-6
Cross-layer Exploration of 2.5D Energy-Efficient Heterogeneous Chiplets Integration: From System Simulation to Open Hardware
In the past decade, computing systems have significantly increased in complexity and power consumption. Nowadays, heterogeneous multi-processor systems-on-chip (MPSoCs) integrate many computing cores. Heterogeneous MPSoCs often comprise general-purpose processors and a variety of accelerators, thus supporting specialized functions for the target application domain to minimize overall energy when executing a specific task. The ensuing architectural design space is, therefore, increasingly multi-dimensional, especially in the light of upcoming 2.5D/3D chiplets integration, which, on one side, allows unprecedented system integration possibilities but, on the other, exacerbates data transfer bottlenecks and affects overall power consumption significantly. To traverse such space in search of high-performance/high-efficiency solutions, we introduce a cross-layer approach combining fast explorations with virtual systems with modular open-hardware design frameworks. This paper showcases how these two approaches effectively cross-fertilize: detailed hardware designs are essential in calibrating performance, power and temperature models, and validating simulation outcomes. Conversely, full system simulation is crucial for projecting the impact of design choices towards complex but energy-efficient heterogeneous multi-processor architectures.
- 5 August 2024
- Published by Association for Computing Machinery (ACM)
- p. 1-6
Open AccessCross-layer Exploration of 2.5D Energy-Efficient Heterogeneous Chiplets Integration: From System Simulation to Open Hardware
In the past decade, computing systems have significantly increased in complexity and power consumption. Nowadays, heterogeneous multi-processor systems-on-chip (MPSoCs) integrate many computing cores. Heterogeneous MPSoCs often comprise general-purpose processors and a variety of accelerators, thus supporting specialized functions for the target application domain to minimize overall energy when executing a specific task. The ensuing architectural design space is, therefore, increasingly multi-dimensional, especially in the light of upcoming 2.5D/3D chiplets integration, which, on one side, allows unprecedented system integration possibilities but, on the other, exacerbates data transfer bottlenecks and affects overall power consumption significantly. To traverse such space in search of high-performance/high-efficiency solutions, we introduce a cross-layer approach combining fast explorations with virtual systems with modular open-hardware design frameworks. This paper showcases how these two approaches effectively cross-fertilize: detailed hardware designs are essential in calibrating performance, power and temperature models, and validating simulation outcomes. Conversely, full system simulation is crucial for projecting the impact of design choices towards complex but energy-efficient heterogeneous multi-processor architectures.
- Open Access
- 7 May 2024
- Published by Association for Computing Machinery (ACM)
- p. 67-70
Performance evaluation of acceleration of convolutional layers on OpenEdgeCGRA
Recently, efficiently deploying deep learning solutions on the edge has received increasing attention. New platforms are emerging to support the increasing demand for flexibility and high performance. In this work, we explore the efficient mapping of convolutional layers on an open-hardware, low-power Coarse-Grain Reconfigurable Array (CGRA), namely OpenEdgeCGRA. We explore both direct implementations of convolution and solutions that transform it into a matrix multiplication through an Im2col transformation and experiment with various tensor parallelism axes. We show that for this hardware target, direct convolution, coupled with weight parallelism, reaches the best latency and energy efficiency, outperforming a pure CPU implementation by 3.4× and 9.9× in terms of energy and latency, respectively.
- 7 May 2024
- Published by Association for Computing Machinery (ACM)
- p. 67-70
Open AccessPerformance evaluation of acceleration of convolutional layers on OpenEdgeCGRA
Recently, efficiently deploying deep learning solutions on the edge has received increasing attention. New platforms are emerging to support the increasing demand for flexibility and high performance. In this work, we explore the efficient mapping of convolutional layers on an open-hardware, low-power Coarse-Grain Reconfigurable Array (CGRA), namely OpenEdgeCGRA. We explore both direct implementations of convolution and solutions that transform it into a matrix multiplication through an Im2col transformation and experiment with various tensor parallelism axes. We show that for this hardware target, direct convolution, coupled with weight parallelism, reaches the best latency and energy efficiency, outperforming a pure CPU implementation by 3.4× and 9.9× in terms of energy and latency, respectively.