PWPing Wang

Ping Wang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Ping Wang has a total of 117 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Dual active bridge converter and its control

    by Ping Wang, Zian Qin, Jing Yuan, Frede Blaabjerg


  • Contributors

    by Mostafa Abarzadeh, Kamal Al-Haddad, Amir Sajjad Bahman, Reza Barzegarkhoo, Pavol Bauer, Frede Blaabjerg, Junfan Chai, Gautham Ram Chandra Mouli, Wu Chen, Zhe Chen, et al.

  • Circuits and magnetics co-design for ultra-thin vertical power delivery: A snapshot review

    by Youssef Elasser, Haoran Li, Ping Wang, Jaeil Baek, Kaladhar Radhakrishnan, Shuai Jiang, Houle Gan, Xin Zhang, David Giuliano, Minjie Chen


  • Design of TCAS Signal Generation Module Based on ZIF Architecture

    by Peng Zhang, Ping Wang

    This paper presents an airborne traffic collision avoidance system (TCAS) testing stimulus generation module based on the zero intermediate frequency (ZIF) transceiver architecture. Data correction algorithms and intrusion signal simulation techniques are discussed. According to the requirement of TCAS scenario simulations, Multiple intrusion signals with horizontal and vertical dynamic characteristics can be generated. Compared with classic signal simulation solutions, the proposed module has the advantages of high integration, high reusability and low cost, and can meet the requirement of internal field testing of airborne TCAS devices, which has a broad application prospect.

  • Top Cited Papers

    MSC-PoL: Hybrid GaN–Si Multistacked Switched-Capacitor 48-V PwrSiP VRM for Chiplets

    by Ping Wang, Yenan Chen, Gregory Szczeszynski, Stephen Allen, David M. Giuliano, Minjie Chen

    This article presents a multistack switched-capacitor point-of-load (MSC-PoL) voltage regulation module (VRM) with coupled magnetics for ultrahigh-current chiplet systems. In the MSC-PoL architecture, the stacked switched-capacitor cells split the high input voltage into several intermediate voltage rails, which are loaded with the switched-inductor cells to achieve soft charging and voltage regulation. Automatic capacitor voltage balancing and inductor current sharing are realized during the soft charging process. Many inductors of the switched-inductor cells are coupled into one and operated in interleaving to reduce the inductor current ripple and boost the transient speed. A 48-to-1-V/450-A VRM containing two MSC-PoL modules is built and tested, leveraging high-voltage GaN devices for the front end and high-current silicon devices for the back end. Two ladder-structured coupled inductor designs are developed and compared, one of which installs a leakage magnetic plate to adjust the leakage inductance for lower current ripple. Featuring 3-D stacked packaging, the entire power stage, gate drivers, and bootstrap circuits of one MSC-PoL module are enclosed into a $\frac{1}{16}$ -brick/0.31-in $^{3}$ /6-mm-thick package. The peak efficiency, the full-load efficiency, and the full-load power density (including both gate loss and size) of the MSC-PoL prototype with and without using the leakage plate are 91.7% and 89.5%, 85.8% and 85.6%, and 621 and 724 W/in $^{3}$ , respectively. The 6-mm-thick MSC-PoL converter can be embedded into the chiplet or CPU socket, enabling power supply in package for extreme efficiency, density, and control bandwidth.


  • Open Access

    MSC-PoL: Hybrid GaN-Si Multistacked Switched Capacitor 48V PwrSiP VRM for Chiplets

    by Ping Wang, Yenan Chen, Gregory Szczeszynski, Stephen Allen, David Giuliano, Minjie Chen

    This paper presents a multistack switched-capacitor point-of-load (MSC-PoL) voltage regulation module (VRM) with coupled magnetics for ultrahigh-current chiplet systems. In the MSC-PoL architecture, the stacked switched-capacitor cells split the high input voltage into several intermediate voltage rails, which are loaded with the switched-inductor cells to achieve soft charging and voltage regulation. Automatic capacitor voltage balancing and inductor current sharing are realized during the soft charging process. Many inductors of the switched-inductor cells are coupled into one and operated in interleaving to reduce the inductor current ripple and boost the transient speed. A 48-to-1-V/450-A VRM containing two MSC-PoL modules is built and tested, leveraging high voltage GaN devices for the front-end and high current Silicon devices for the back-end. Two ladder-structured coupled inductor designs are developed and compared, one of which installs a leakage magnetic plate to adjust the leakage inductance for lower current ripple. Featuring 3D stacked packaging, the entire power stage, gate drivers, and bootstrap circuits of one MSC-PoL module are enclosed into a 1/16-brick/0.31-in 3 /6-mm-thick package. The peak and the full-load efficiencies as well as the full-load power density (including both gate loss and size) of the MSC-PoL prototype with and without using the leakage plate are 91.7% and 89.5%, 85.8% and 85.6%, and 621 W/in 3 and 724 W/in 3 , respectively. The 6-mm-thick MSC-PoL converter can be embedded into the chiplet or CPU socket, enabling power-supply-in-package (PwrSiP) for extreme efficiency, density, and control bandwidth.

  • Interphase $LC$ Resonance and Stability Analysis of Series-Capacitor Buck Converters

    by Ping Wang, Daniel Zhou, Haoran Li, David M. Giuliano, Gregory Szczeszynski, Stephen Allen, Minjie Chen

    Hybrid switched capacitor power converters, such as the series-capacitor buck (SCB) converter, have intrinsic $LC$ resonant dynamics that might influence its control stability and transient response. This letter presents a systematic approach to analyzing this intrinsic resonant behavior, which can be classified into output $LC_{o}$ resonance and interphase $LC_{B}$ resonance based on common-mode and differential-mode decomposition. The impacts of coupled inductors on the resonant amplitude, frequency, and settling time during a step line transient are analyzed. The influence of intrinsic resonance on control stability is clarified, providing guidance for controller design. A two-phase SCB prototype was built and tested with discrete and coupled inductors under different operating conditions. All the analyses are verified by simulation or experimental results.


  • Machine Learning Methods for Feedforward Power Flow Control of Multi-Active-Bridge Converters

    by Mian Liao, Haoran Li, Ping Wang, Tanuj Sen, Yenan Chen, Minjie Chen

    Controlling the multiway power flow in a multi-active-bridge (MAB) converter is important for achieving high performance and sophisticated functions. Traditional feedforward methods for MAB converter control rely on precise lumped circuit models. This article presents a machine learning (ML) method for the feedforward power flow control of an MAB converter without a precise circuit model. A feedforward neural network was developed to capture the nonlinear characteristics and predict the phases needed to achieve the targeted power flow. The neural network was trained with a large amount of data, collected with a set of known phase angles. This trained network was used to predict the phases to achieve the targeted power flow. A six-port MAB converter was built and tested to validate the methodology and demonstrate the “machine-learning-in-the-loop” implementation. Transfer learning was proven to be effective in reducing the size of the training data needed to obtain an accurate ML model. ML-based feedforward power flow control can achieve comparable accuracy as traditional model-based methods and can function without a precise lumped circuit element model of the MAB converter.


  • Matrix Coupled All-in-One Magnetics for PWM Power Conversion

    by Ping Wang, Daniel H. Zhou, Youssef Elasser, Jaeil Baek, Minjie Chen

    This article investigates the matrix coupled “all-in-one” magnetic structure that combines both series coupling and parallel coupling for pulse-width modulated (PWM) power conversion. A systematic analysis of the current ripple reduction mechanism is performed. Current ripple steering among asymmetric series coupled windings is discussed. The transient performance of the matrix coupled inductor is demystified, providing insights for analyzing converter dynamics and its large- or small-signal modeling. To quantify the benefits of matrix coupling, a figure of merit is defined by comparing the current ripple of a matrix coupled inductor to that of a discrete inductor given the same transient speed. The comparison results indicate that a higher number of phases and a stronger matrix coupling coefficient amplify the benefits of matrix coupling. A 1 V-to-5 V input, 1 V-to-5 V output, four-phase matrix coupled synchronous SEPIC converter with planar PCB integrated magnetics is built and tested. The matrix coupled SEPIC prototype can support load current up to 185 A at 5 V-to-1 V voltage conversion with a maximum power density over 470 W/in $^\text{3}$ . Compared to commercial discrete inductors, the matrix coupled inductor has a 5.6 times smaller size and 8.5 times faster transient speed with similar current ripple and current rating. The experimental results validate the matrix coupling concept and the theoretical analysis, opening the possibilities toward wide adoption of ‘‘all-in-one-magnetics” in PWM topologies.