Chendong Shuang
Research Subjects
Chendong Shuang has a total of 78 co-authors. Here are the top co-authors by number of shared publications:
- Aimin Li
State Key Laboratory of Water Pollution Control and Green Resource Recycling, School of Environment, Nanjing University, Nanjing, 210023, Jiangsu, China
12 shared publications Aimin Li
State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
8 shared publicationsQing Zhou
State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing 210023, China
5 shared publications- Qing Zhou
State Key Laboratory of Water Pollution Control and Green Resource Recycling, School of Environment, Nanjing University
4 shared publications Wentao Li
State Key Laboratory of Pollution Control and Resources Reuse, School of the Environment, Nanjing University, Nanjing, 210023, P. R. China
4 shared publicationsBicun Jiang
Affiliations State Key Laboratory of Pollution Control and Resources Reuse, School of the Environment, Nanjing University, Nanjing, PR China, Nanjing Innovation Center for Environmental Protection Industry Co., Ltd., Nanjing, PR China
3 shared publications
Latest Publications
- 23 September 2026
- Published by Elsevier in Bioresource Technology
- Vol. 464
Role of fungi in biological ion exchange for treating wastewater: performance and mechanisms under humic acid stress
- 23 September 2026
- Published by Elsevier in Bioresource Technology
- Vol. 464
Role of fungi in biological ion exchange for treating wastewater: performance and mechanisms under humic acid stress
- 4 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18  (6) , 9728-9739
Thermo-Regenerable Anion-Exchange Composites for the Removal of Diclofenac and Ibuprofen
Anion-exchange resins (AER) are widely applied in water treatment, although their chemical-intensive regeneration remains a bottleneck for the consumption of chemicals and generation of wastes. This study presents a thermo-regenerable AER composite (TR@AER) prepared via the interpenetration of poly(acrylic acid-co-acrylamide) (p(AA-co-AM)) within the AER matrix. TR@AER exhibits thermoresponsive hydrophilicity and surface charge, evidenced by a decrease in contact angle from 88.1° (25 °C) to 76.7° (50 °C) and a drop in ζ-potential from +36.9 mV (25 °C) to +31.1 mV (50 °C). In situ variothermal FTIR and molecular dynamics simulations reveal that this dual response is triggered by the dissociation of hydrogen bonds between -COOH and -CONH2 groups in p(AA-co-AM). The dissociation simultaneously drives the hydrophobic-to-hydrophilic transition and deprotonation of -COOH groups in p(AA-co-AM), which subsequently interact with quaternary ammonium (-NR3+) moieties of AER and alter surface charge characteristics. This enables a switchable adsorption and desorption of organic contaminants. At 25 °C, TR@AER rapidly adsorbs diclofenac and ibuprofen through synergistic electrostatic and hydrophobic interactions. Heating to 50 °C disrupts these interactions, significantly enhancing desorption. The desorption efficiency correlates with p(AA-co-AM) content in TR@AER. At the optimal p(AA-co-AM) loading (26-37 wt%), diclofenac desorption reached 92.2% and ibuprofen desorption reached 96.0% at 50 °C, representing 1.7- and 1.8-fold that of 25 °C, respectively. By circumventing chemical-intensive regeneration protocols, this work highlights an innovative strategy for stimuli-responsive adsorbent design with excellent regeneration capabilities.
- 4 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18  (6) , 9728-9739
Thermo-Regenerable Anion-Exchange Composites for the Removal of Diclofenac and Ibuprofen
Anion-exchange resins (AER) are widely applied in water treatment, although their chemical-intensive regeneration remains a bottleneck for the consumption of chemicals and generation of wastes. This study presents a thermo-regenerable AER composite (TR@AER) prepared via the interpenetration of poly(acrylic acid-co-acrylamide) (p(AA-co-AM)) within the AER matrix. TR@AER exhibits thermoresponsive hydrophilicity and surface charge, evidenced by a decrease in contact angle from 88.1° (25 °C) to 76.7° (50 °C) and a drop in ζ-potential from +36.9 mV (25 °C) to +31.1 mV (50 °C). In situ variothermal FTIR and molecular dynamics simulations reveal that this dual response is triggered by the dissociation of hydrogen bonds between -COOH and -CONH2 groups in p(AA-co-AM). The dissociation simultaneously drives the hydrophobic-to-hydrophilic transition and deprotonation of -COOH groups in p(AA-co-AM), which subsequently interact with quaternary ammonium (-NR3+) moieties of AER and alter surface charge characteristics. This enables a switchable adsorption and desorption of organic contaminants. At 25 °C, TR@AER rapidly adsorbs diclofenac and ibuprofen through synergistic electrostatic and hydrophobic interactions. Heating to 50 °C disrupts these interactions, significantly enhancing desorption. The desorption efficiency correlates with p(AA-co-AM) content in TR@AER. At the optimal p(AA-co-AM) loading (26-37 wt%), diclofenac desorption reached 92.2% and ibuprofen desorption reached 96.0% at 50 °C, representing 1.7- and 1.8-fold that of 25 °C, respectively. By circumventing chemical-intensive regeneration protocols, this work highlights an innovative strategy for stimuli-responsive adsorbent design with excellent regeneration capabilities.
- Open Access
Preparation and Research Progress of Polymer-Based Anion Exchange Chromatography Stationary Phases
Ion chromatography (IC) serves as a pivotal technique in trace ion analysis, and the separation performance of IC is largely determined by the properties of stationary phases. In contrast to silica-based matrices, polymer-based stationary phases have garnered significant interest owing to their outstanding pH stability and mechanical robustness. However, unmodified polymer matrices usually lack necessary ion exchange functions and selectivity; therefore, precise functional modification is the key to improving their chromatographic separation performance. This paper provides a systematic overview of recent advances in the synthesis and functional modification of polymer-based anion exchange chromatography stationary phases over the past few years. Firstly, the types and characteristics of polymer matrices commonly used for functional modification are summarized; secondly, the origin and improvement of common synthesis methods such as microporous membrane emulsification, droplet microfluidics, suspension polymerization, emulsion polymerization, soap-free emulsion polymerization, precipitation polymerization, dispersion polymerization, and seed swelling are introduced according to the molding methods of polymer matrices; furthermore, the principles, characteristics, and development status of mainstream functionalization strategies, including chemical derivatization, surface grafting, latex agglomeration, and hyperbranching, are emphasized. Finally, the existing challenges and prospective development trends in this field are discussed and outlooked, with the purpose of offering insights for the targeted design and practical application of high-performance polymer-based anion exchange chromatography stationary phases.
Open AccessPreparation and Research Progress of Polymer-Based Anion Exchange Chromatography Stationary Phases
Ion chromatography (IC) serves as a pivotal technique in trace ion analysis, and the separation performance of IC is largely determined by the properties of stationary phases. In contrast to silica-based matrices, polymer-based stationary phases have garnered significant interest owing to their outstanding pH stability and mechanical robustness. However, unmodified polymer matrices usually lack necessary ion exchange functions and selectivity; therefore, precise functional modification is the key to improving their chromatographic separation performance. This paper provides a systematic overview of recent advances in the synthesis and functional modification of polymer-based anion exchange chromatography stationary phases over the past few years. Firstly, the types and characteristics of polymer matrices commonly used for functional modification are summarized; secondly, the origin and improvement of common synthesis methods such as microporous membrane emulsification, droplet microfluidics, suspension polymerization, emulsion polymerization, soap-free emulsion polymerization, precipitation polymerization, dispersion polymerization, and seed swelling are introduced according to the molding methods of polymer matrices; furthermore, the principles, characteristics, and development status of mainstream functionalization strategies, including chemical derivatization, surface grafting, latex agglomeration, and hyperbranching, are emphasized. Finally, the existing challenges and prospective development trends in this field are discussed and outlooked, with the purpose of offering insights for the targeted design and practical application of high-performance polymer-based anion exchange chromatography stationary phases.
- 17 December 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60  (1) , 1503-1516
Ca 2+ -Mediated Humic Acid Clusters: The Key to Unraveling Neutral Pollutant Rejection in Nanofiltration
Nanofiltration (NF) process remains ineffective in removing neutral pollutants. The variable conditions of real water matrices further complicate the mechanisms of rejection. This study employed premixing and prefouling experiments to isolate the individual contributions of the fouling layer and solute-solute interactions to overall rejection. Our findings reveal that calcium ions (Ca2+) play a critical role by altering the properties of humic acid (HA) clusters. Specifically, Ca2+ minimizes HA cluster size at 0.2 mM, leading to a denser fouling layer and inducing the most significant concentration polarization. Furthermore, Ca2+ enhances the hydrophobicity of HA clusters, thereby suppressing hydrogen bonding with neutral pollutants. Overall, concentration polarization has a limited effect on the rejection of neutral pollutants. However, HA-pollutant binding plays a major role in removing small neutral molecules (e.g., erythritol and acetaminophen), which are hard to retain otherwise. Ca2+ disrupts these binding interactions and results in a notable decrease in rejection. Through validation with real water samples, this study identifies the intrinsic factors that cause the discrepancy in rejection performance between ultrapure water and complex aquatic environments. These insights provide a foundation for developing targeted water quality regulation strategies to improve the NF removal efficiency of neutral pollutants.
- 17 December 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 60  (1) , 1503-1516
Ca 2+ -Mediated Humic Acid Clusters: The Key to Unraveling Neutral Pollutant Rejection in Nanofiltration
Nanofiltration (NF) process remains ineffective in removing neutral pollutants. The variable conditions of real water matrices further complicate the mechanisms of rejection. This study employed premixing and prefouling experiments to isolate the individual contributions of the fouling layer and solute-solute interactions to overall rejection. Our findings reveal that calcium ions (Ca2+) play a critical role by altering the properties of humic acid (HA) clusters. Specifically, Ca2+ minimizes HA cluster size at 0.2 mM, leading to a denser fouling layer and inducing the most significant concentration polarization. Furthermore, Ca2+ enhances the hydrophobicity of HA clusters, thereby suppressing hydrogen bonding with neutral pollutants. Overall, concentration polarization has a limited effect on the rejection of neutral pollutants. However, HA-pollutant binding plays a major role in removing small neutral molecules (e.g., erythritol and acetaminophen), which are hard to retain otherwise. Ca2+ disrupts these binding interactions and results in a notable decrease in rejection. Through validation with real water samples, this study identifies the intrinsic factors that cause the discrepancy in rejection performance between ultrapure water and complex aquatic environments. These insights provide a foundation for developing targeted water quality regulation strategies to improve the NF removal efficiency of neutral pollutants.
- 28 May 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59  (22) , 11308-11320
Control of Effluent Organic Matter, Cytotoxicity, and Disinfection Byproducts in Wastewater with Biological Anion Exchange Resins: Enhanced Performance through Skeleton Design
Effluent organic matter (EfOM) in wastewater threatens ecosystems and drinking water safety via the urban water cycle. Biofiltration using adsorbents with dual adsorption-biodegradation functions, such as biological anion exchange resins (BAERs), offers a promising solution. Compared to biological activated carbon (BAC), BAERs' adjustable skeletons enable targeted EfOM removal. This study designed two BAERs with polystyrene (PS-AER) and magnetic polyacrylic (MPA-AER) skeletons and compared them with conventional polyacrylic BAER (PA-AER) and BACs. During 12 000-bed-volume field applications, BAERs demonstrated 1.7-2.6 and 1.6-2.6 times higher dissolved organic carbon (DOC) and UV254 removal rates than BACs. This efficacy stemmed from the high concentration of negatively charged components, which BAERs effectively attract. Furthermore, skeleton modifications improved DOC removal by 15.3-17.2% and UV254 removal by 7.3-18.2% for PS-AER and MPA-AER, compared to PA-AER. The MPA-AER's open pore structure enhanced diffusion of high molecular weight components, while PS-AER's enhanced hydrophobicity improved aromatic component removal. These structural changes also influenced the biological effects of BAERs. Notably, the enhanced performance of PS-AER and MPA-AER reduced wastewater cytotoxicity and controlled the production of disinfection byproducts. Overall, this study confirms the potential of BAERs in wastewater treatment and highlights strategies for performance enhancement through skeleton modification.
- 28 May 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59  (22) , 11308-11320
Control of Effluent Organic Matter, Cytotoxicity, and Disinfection Byproducts in Wastewater with Biological Anion Exchange Resins: Enhanced Performance through Skeleton Design
Effluent organic matter (EfOM) in wastewater threatens ecosystems and drinking water safety via the urban water cycle. Biofiltration using adsorbents with dual adsorption-biodegradation functions, such as biological anion exchange resins (BAERs), offers a promising solution. Compared to biological activated carbon (BAC), BAERs' adjustable skeletons enable targeted EfOM removal. This study designed two BAERs with polystyrene (PS-AER) and magnetic polyacrylic (MPA-AER) skeletons and compared them with conventional polyacrylic BAER (PA-AER) and BACs. During 12 000-bed-volume field applications, BAERs demonstrated 1.7-2.6 and 1.6-2.6 times higher dissolved organic carbon (DOC) and UV254 removal rates than BACs. This efficacy stemmed from the high concentration of negatively charged components, which BAERs effectively attract. Furthermore, skeleton modifications improved DOC removal by 15.3-17.2% and UV254 removal by 7.3-18.2% for PS-AER and MPA-AER, compared to PA-AER. The MPA-AER's open pore structure enhanced diffusion of high molecular weight components, while PS-AER's enhanced hydrophobicity improved aromatic component removal. These structural changes also influenced the biological effects of BAERs. Notably, the enhanced performance of PS-AER and MPA-AER reduced wastewater cytotoxicity and controlled the production of disinfection byproducts. Overall, this study confirms the potential of BAERs in wastewater treatment and highlights strategies for performance enhancement through skeleton modification.
- 23 February 2024
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 4  (4) , 1546-1555
Advanced Treatment of Wastewater by Biological Ion-Exchange Resin for Dissolved Organic Carbon and Pharmaceutical Removal
- 23 February 2024
- Published by American Chemical Society (ACS) in ACS ES&T Water
- Vol. 4  (4) , 1546-1555
Advanced Treatment of Wastewater by Biological Ion-Exchange Resin for Dissolved Organic Carbon and Pharmaceutical Removal
- 11 January 2023
- Published by Elsevier in Bioresource Technology
- Vol. 372, 128613
Biological magnetic ion exchange resin on advanced treatment of synthetic wastewater
- 11 January 2023
- Published by Elsevier in Bioresource Technology
- Vol. 372, 128613
Biological magnetic ion exchange resin on advanced treatment of synthetic wastewater
- Open Access
- 9 August 2022
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 17  (8) , e0271075
Preparation of Graphite-UiO-66(Zr)/Ti electrode for efficient electrochemical oxidation of tetracycline in water
Tetracycline (TC) is widely-used antibiotic pollutant with high toxicity, refractory, persistence and bacteriostasis, and its removal from water needs to be enhanced. In this work, a novel Graphite-UiO-66(Zr)/Ti electrode was successfully prepared and evaluated for electrochemical oxidation degradation of TC. The electrochemical performance tests indicate the Graphite-UiO-66(Zr)/Ti electrode had higher electrochemical oxidation activity, which achieved higher TC removal efficiency (98.1% ± 1.5%) than Ti plate (65.2% ± 3.5%), Graphite-MIL-53(Al)/Ti electrode (79.5% ± 2.9%) and Graphite-MIL-100(Fe)/Ti electrode (89.0% ± 2.6%). The influence of operating condition was also systematically studied, and the optimized condition was pH 5.0, 20 mA/cm2 current density and 0.1 M electrolyte (Na2SO4). Through the liquid chromatography mass spectrometry (LC-MS), the TC degradation pathway by Graphite-UiO-66(Zr)/Ti electrode oxidation was proposed. Under the •OH free radical oxidative decomposition effect, the double bond, phenolic group and amine group of TC were attacked. TC was transformed into intermediate product ①(m/z = 447), then was further degraded to intermediates ② (m/z = 401) and ③ (m/z = 417). The latter was fragmented into small fractions ④ (m/z = 194), ⑤but-2-enedioic acid (m/z = 116) and ⑥oxalic acid (m/z = 90, the proposed intermediate). In addition, TC removal remained at 89.6% ± 2.7% in the sixth cycle of operation, which confirmed the efficient reusability and stability for antibiotics removal from water.
- 9 August 2022
- Published by Public Library of Science (PLoS) in PLOS ONE
- Vol. 17  (8) , e0271075
Open AccessPreparation of Graphite-UiO-66(Zr)/Ti electrode for efficient electrochemical oxidation of tetracycline in water
Tetracycline (TC) is widely-used antibiotic pollutant with high toxicity, refractory, persistence and bacteriostasis, and its removal from water needs to be enhanced. In this work, a novel Graphite-UiO-66(Zr)/Ti electrode was successfully prepared and evaluated for electrochemical oxidation degradation of TC. The electrochemical performance tests indicate the Graphite-UiO-66(Zr)/Ti electrode had higher electrochemical oxidation activity, which achieved higher TC removal efficiency (98.1% ± 1.5%) than Ti plate (65.2% ± 3.5%), Graphite-MIL-53(Al)/Ti electrode (79.5% ± 2.9%) and Graphite-MIL-100(Fe)/Ti electrode (89.0% ± 2.6%). The influence of operating condition was also systematically studied, and the optimized condition was pH 5.0, 20 mA/cm2 current density and 0.1 M electrolyte (Na2SO4). Through the liquid chromatography mass spectrometry (LC-MS), the TC degradation pathway by Graphite-UiO-66(Zr)/Ti electrode oxidation was proposed. Under the •OH free radical oxidative decomposition effect, the double bond, phenolic group and amine group of TC were attacked. TC was transformed into intermediate product ①(m/z = 447), then was further degraded to intermediates ② (m/z = 401) and ③ (m/z = 417). The latter was fragmented into small fractions ④ (m/z = 194), ⑤but-2-enedioic acid (m/z = 116) and ⑥oxalic acid (m/z = 90, the proposed intermediate). In addition, TC removal remained at 89.6% ± 2.7% in the sixth cycle of operation, which confirmed the efficient reusability and stability for antibiotics removal from water.
- 18 June 2022
- Published by Elsevier in Chemosphere
- Vol. 305, 135400
Improved mineralization and total nitrogen reduction by combination of electro-reduction and electro-oxidation for nitrophenol removal
- 18 June 2022
- Published by Elsevier in Chemosphere
- Vol. 305, 135400
Improved mineralization and total nitrogen reduction by combination of electro-reduction and electro-oxidation for nitrophenol removal
- Open Access
- 25 May 2022
- Published by Springer Nature in Nature Communications
- Vol. 13  (1) , 1-10
Rhodium-catalyzed selective direct arylation of phosphines with aryl bromides
The widespread use of phosphine ligand libraries is frequently hampered by the challenges associated with their modular preparation. Here, we report a protocol that appends arenes to arylphosphines to access a series of biaryl monophosphines via rhodium-catalyzed P(III)-directedorthoC–H activation, enabling unprecedented one-fold, two-fold, and three-fold direct arylation. Our experimental and theoretical findings reveal a mechanism involving oxidative addition of aryl bromides to the Rh catalyst, furtherorthoC–H metalation viaafour-membered cyclometalated ring. Given the ready availability of substrates, our approach opens the door to developing more general methods for the construction of phosphine ligands.
- 25 May 2022
- Published by Springer Nature in Nature Communications
- Vol. 13  (1) , 1-10
Open AccessRhodium-catalyzed selective direct arylation of phosphines with aryl bromides
The widespread use of phosphine ligand libraries is frequently hampered by the challenges associated with their modular preparation. Here, we report a protocol that appends arenes to arylphosphines to access a series of biaryl monophosphines via rhodium-catalyzed P(III)-directedorthoC–H activation, enabling unprecedented one-fold, two-fold, and three-fold direct arylation. Our experimental and theoretical findings reveal a mechanism involving oxidative addition of aryl bromides to the Rh catalyst, furtherorthoC–H metalation viaafour-membered cyclometalated ring. Given the ready availability of substrates, our approach opens the door to developing more general methods for the construction of phosphine ligands.