Jieun Lee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jieun Lee has a total of 40 co-authors. Here are the top co-authors by number of shared publications:
- Jang Wook Choi
Seoul National University 1 Gwanak-Ro , Gwanak-Gu
3 shared publications Hyuntae Kim
School of Chemical and Biological Engineering and Institute of Chemical Processes Seoul National University 1 Gwanak‐ro, Gwanak‐gu Seoul 08826 Republic of Korea
2 shared publicationsTaegeun Lee
School of Chemical and Biological Engineering and Institute of Chemical Processes Seoul National University 1 Gwanak‐ro, Gwanak‐gu Seoul 08826 Republic of Korea
2 shared publicationsA-Yeon Kim
Korea Institute of Science and Technology
1 shared publication- Ali Coskun
Department of Chemistry University of Fribourg Fribourg Switzerland
1 shared publication - Angela Sun
Chemical Sciences and Engineering Division, Argonne National Laboratory, Lemont, IL, USA
1 shared publication
Latest Publications
- Open Access
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (7) , 5051-5060
Mesoporous Carbon Hosts with Tailored Pore Structure for Lithium Deposition in Anode-Free All-Solid-State Batteries
Anode-free sulfide all-solid-state lithium batteries have emerged as a platform for achieving increased energy density. However, their practical operation is limited by heterogeneous interfacial reactions and uneven lithium deposition, which degrade reversibility and cycling stability. Among various approaches, silver−carbon (Ag−C) interlayers have attracted attention owing to their lithiophilicity and alloying behavior. Despite these advances, the role of carbon pore architecture in governing lithium deposition remains unclear. Here, we engineer mesoporous carbon hosts with tailored pore sizes to regulate the spatial distribution of Ag nanoparticles, thereby controlling Ag−C interfacial contact in anode-free sulfide ASSLBs. Systematic pore-size tuning promotes a more uniform distribution of Ag−C interfacial contact sites and enables homogeneous lithium deposition. Consequently, the pore-engineered host delivers enhanced cycling stability. This work establishes a clear structure−function relationship between carbon pore architecture and lithium deposition behavior, providing design guidelines for anode-free solid-state batteries.
- 12 June 2026
- Published by American Chemical Society (ACS) in ACS Energy Letters
- Vol. 11 (7) , 5051-5060
Open AccessMesoporous Carbon Hosts with Tailored Pore Structure for Lithium Deposition in Anode-Free All-Solid-State Batteries
Anode-free sulfide all-solid-state lithium batteries have emerged as a platform for achieving increased energy density. However, their practical operation is limited by heterogeneous interfacial reactions and uneven lithium deposition, which degrade reversibility and cycling stability. Among various approaches, silver−carbon (Ag−C) interlayers have attracted attention owing to their lithiophilicity and alloying behavior. Despite these advances, the role of carbon pore architecture in governing lithium deposition remains unclear. Here, we engineer mesoporous carbon hosts with tailored pore sizes to regulate the spatial distribution of Ag nanoparticles, thereby controlling Ag−C interfacial contact in anode-free sulfide ASSLBs. Systematic pore-size tuning promotes a more uniform distribution of Ag−C interfacial contact sites and enables homogeneous lithium deposition. Consequently, the pore-engineered host delivers enhanced cycling stability. This work establishes a clear structure−function relationship between carbon pore architecture and lithium deposition behavior, providing design guidelines for anode-free solid-state batteries.
- 1 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (19) , 14014-14029
Processing Challenges and Strategies for a Robust Ultrathin Solid Electrolyte Membrane in Sulfide-Based All-Solid-State Batteries
- 1 October 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (19) , 14014-14029
Processing Challenges and Strategies for a Robust Ultrathin Solid Electrolyte Membrane in Sulfide-Based All-Solid-State Batteries
- 15 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 388 (6748) , 724-729
Halide segregation to boost all-solid-state lithium-chalcogen batteries
Mixing electroactive materials, solid-state electrolytes, and conductive carbon to fabricate composite electrodes is the most practiced but least understood process in all-solid-state batteries, which strongly dictates interfacial stability and charge transport. We report on universal halide segregation at interfaces across various halogen-containing solid-state electrolytes and a family of high-energy chalcogen cathodes enabled by mechanochemical reaction during ultrahigh-speed mixing. Bulk and interface characterizations by multimodal synchrotron x-ray probes and cryo–transmission electron microscopy show that the in situ segregated lithium halide interfacial layers substantially boost effective ion transport and suppress the volume change of bulk chalcogen cathodes. Various all-solid-state lithium-chalcogen cells demonstrate utilization close to 100% and extraordinary cycling stability at commercial-level areal capacities.
- 15 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 388 (6748) , 724-729
Halide segregation to boost all-solid-state lithium-chalcogen batteries
Mixing electroactive materials, solid-state electrolytes, and conductive carbon to fabricate composite electrodes is the most practiced but least understood process in all-solid-state batteries, which strongly dictates interfacial stability and charge transport. We report on universal halide segregation at interfaces across various halogen-containing solid-state electrolytes and a family of high-energy chalcogen cathodes enabled by mechanochemical reaction during ultrahigh-speed mixing. Bulk and interface characterizations by multimodal synchrotron x-ray probes and cryo–transmission electron microscopy show that the in situ segregated lithium halide interfacial layers substantially boost effective ion transport and suppress the volume change of bulk chalcogen cathodes. Various all-solid-state lithium-chalcogen cells demonstrate utilization close to 100% and extraordinary cycling stability at commercial-level areal capacities.
- 1 September 2022
- Published by Wiley in Advanced Materials
- Vol. 34 (40) , e2203580
Room‐Temperature Anode‐Less All‐Solid‐State Batteries via the Conversion Reaction of Metal Fluorides
All‐solid‐state batteries (ASSBs) that employ anode‐less electrodes have drawn attention from across the battery community because they offer competitive energy densities and a markedly improved cycle life. Nevertheless, the composite matrices of anode‐less electrodes impose a substantial barrier for lithium‐ion diffusion and inhibit operation at room temperature. To overcome this drawback, here, the conversion reaction of metal fluorides is exploited because metallic nanodomains formed during this reaction induce an alloying reaction with lithium ions for uniform and sustainable lithium (de)plating. Lithium fluoride (LiF), another product of the conversion reaction, prevents the agglomeration of the metallic nanodomains and also protects the electrode from fatal lithium dendrite growth. A systematic analysis identifies silver (I) fluoride (AgF) as the most suitable metal fluoride because the silver nanodomains can accommodate the solid‐solution mechanism with a low nucleation overpotential. AgF‐based full cells attain reliable cycling at 25 °C even with an exceptionally high areal capacity of 9.7 mAh cm−2 (areal loading of LiNi0.8Co0.1Mn0.1O2 = 50 mg cm–2). These results offer useful insights into designing materials for anode‐less electrodes for sulfide‐based ASSBs.
- 1 September 2022
- Published by Wiley in Advanced Materials
- Vol. 34 (40) , e2203580
Room‐Temperature Anode‐Less All‐Solid‐State Batteries via the Conversion Reaction of Metal Fluorides
All‐solid‐state batteries (ASSBs) that employ anode‐less electrodes have drawn attention from across the battery community because they offer competitive energy densities and a markedly improved cycle life. Nevertheless, the composite matrices of anode‐less electrodes impose a substantial barrier for lithium‐ion diffusion and inhibit operation at room temperature. To overcome this drawback, here, the conversion reaction of metal fluorides is exploited because metallic nanodomains formed during this reaction induce an alloying reaction with lithium ions for uniform and sustainable lithium (de)plating. Lithium fluoride (LiF), another product of the conversion reaction, prevents the agglomeration of the metallic nanodomains and also protects the electrode from fatal lithium dendrite growth. A systematic analysis identifies silver (I) fluoride (AgF) as the most suitable metal fluoride because the silver nanodomains can accommodate the solid‐solution mechanism with a low nucleation overpotential. AgF‐based full cells attain reliable cycling at 25 °C even with an exceptionally high areal capacity of 9.7 mAh cm−2 (areal loading of LiNi0.8Co0.1Mn0.1O2 = 50 mg cm–2). These results offer useful insights into designing materials for anode‐less electrodes for sulfide‐based ASSBs.
- Open Access
Block copolymer binders with hard and soft segments for scalable fabrication of sulfide‐based all‐solid‐state batteries
Sulfide‐based all‐solid‐state batteries (ASSBs) have attracted much attention owing to their superior safety and potentially high‐energy density. Nevertheless, sulfide‐based ASSBs suffer from limited performance in terms of their cycle life and rate capability, which is closely related to interfacial degradation during cycling. Another weakness is the absence of manufacturing protocols. Having noted that the binder can play a pivotal role in both the cell performance and scale‐up, here, we report poly(1,2‐butadiene)‐b‐poly(methyl methacrylate) (PBD‐b‐PMMA) block copolymers as the binders. At the optimal ratio, the soft PBD segments and hard PMMA segments work synergistically to strengthen adhesion among particles in the electrode and introduce elasticity in the binder network, enabling the key battery performance indicators to be improved markedly. The systematic study also reveals the importance of the microscopic distributions of these two segments. This study signifies the appropriate combination of adhesion and elasticity in designing binders for sulfide‐based ASSBs.
Open AccessBlock copolymer binders with hard and soft segments for scalable fabrication of sulfide‐based all‐solid‐state batteries
Sulfide‐based all‐solid‐state batteries (ASSBs) have attracted much attention owing to their superior safety and potentially high‐energy density. Nevertheless, sulfide‐based ASSBs suffer from limited performance in terms of their cycle life and rate capability, which is closely related to interfacial degradation during cycling. Another weakness is the absence of manufacturing protocols. Having noted that the binder can play a pivotal role in both the cell performance and scale‐up, here, we report poly(1,2‐butadiene)‐b‐poly(methyl methacrylate) (PBD‐b‐PMMA) block copolymers as the binders. At the optimal ratio, the soft PBD segments and hard PMMA segments work synergistically to strengthen adhesion among particles in the electrode and introduce elasticity in the binder network, enabling the key battery performance indicators to be improved markedly. The systematic study also reveals the importance of the microscopic distributions of these two segments. This study signifies the appropriate combination of adhesion and elasticity in designing binders for sulfide‐based ASSBs.
- 7 August 2020
- Published by Wiley in Advanced Materials
- Vol. 32 (37) , e2001702
In Situ Deprotection of Polymeric Binders for Solution‐Processible Sulfide‐Based All‐Solid‐State Batteries
Sulfide‐based all‐solid‐state batteries (ASSBs) have been featured as promising alternatives to the current lithium‐ion batteries (LIBs) mainly owing to their superior safety. Nevertheless, a solution‐based scalable manufacturing scheme has not yet been established because of the incompatible polarity of the binder, solvent, and sulfide electrolyte during slurry preparation. This dilemma is overcome by subjecting the acrylate (co)polymeric binders to protection−deprotection chemistry. Protection by the tert‐butyl group allows for homogeneous dispersion of the binder in the slurry based on a relatively less polar solvent, with subsequent heat‐treatment during the drying process to cleave the tert‐butyl group. This exposes the polar carboxylic acid groups, which are then able to engage in hydrogen bonding with the active cathode material, high‐nickel layered oxide. Deprotection strengthens the electrode adhesion such that the strength equals that of commercial LIB electrodes, and the key electrochemical performance parameters are improved markedly in both half‐cell and full‐cell settings. The present study highlights the potential of sulfide‐based ASSBs for scalable manufacturing and also provides insights that protection−deprotection chemistry can generally be used for various battery cells that suffer from polarity incompatibility among multiple electrode components.
- 7 August 2020
- Published by Wiley in Advanced Materials
- Vol. 32 (37) , e2001702
In Situ Deprotection of Polymeric Binders for Solution‐Processible Sulfide‐Based All‐Solid‐State Batteries
Sulfide‐based all‐solid‐state batteries (ASSBs) have been featured as promising alternatives to the current lithium‐ion batteries (LIBs) mainly owing to their superior safety. Nevertheless, a solution‐based scalable manufacturing scheme has not yet been established because of the incompatible polarity of the binder, solvent, and sulfide electrolyte during slurry preparation. This dilemma is overcome by subjecting the acrylate (co)polymeric binders to protection−deprotection chemistry. Protection by the tert‐butyl group allows for homogeneous dispersion of the binder in the slurry based on a relatively less polar solvent, with subsequent heat‐treatment during the drying process to cleave the tert‐butyl group. This exposes the polar carboxylic acid groups, which are then able to engage in hydrogen bonding with the active cathode material, high‐nickel layered oxide. Deprotection strengthens the electrode adhesion such that the strength equals that of commercial LIB electrodes, and the key electrochemical performance parameters are improved markedly in both half‐cell and full‐cell settings. The present study highlights the potential of sulfide‐based ASSBs for scalable manufacturing and also provides insights that protection−deprotection chemistry can generally be used for various battery cells that suffer from polarity incompatibility among multiple electrode components.