Tyll Stöcker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tyll Stöcker has a total of 79 co-authors. Here are the top co-authors by number of shared publications:
- Heiko Schoof
University of Bonn
12 shared publications - Frank Hochholdinger
Crop Functional Genomics, Institute of Crop Science and Resource Conservation, University of Bonn, 53113 Bonn, Germany
8 shared publications - Caroline Marcon
INRES, Institute of Crop Science and Resource Conservation, Crop Functional Genomics, University of Bonn , Bonn 53113
6 shared publications - Yan Naing Win
Crop Functional Genomics, Institute of Crop Science and Resource Conservation (INRES), University of Bonn, 53113 Bonn, Germany
6 shared publications - Alexa Brox
Crop Functional Genomics, Institute of Crop Science and Resource Conservation (INRES), University of Bonn, 53113 Bonn, Germany
4 shared publications - Xuelian Du
Crop Functional Genomics, Institute of Crop Science and Resource Conservation (INRES), University of Bonn, 53113 Bonn, Germany
4 shared publications
Latest Publications
- Open Access
- 25 October 2024
- Published by Wiley in The Plant Journal
- Vol. 120 (5) , 2253-2268
Expanding the BonnMu sequence‐indexed repository of transposon induced maize (Zea mays L.) mutations in dent and flint germplasm
SUMMARY: The BonnMu resource is a transposon tagged mutant collection designed for functional genomics studies in maize. To expand this resource, we crossed an active Mutator (Mu) stock with dent (B73, Co125) and flint (DK105, EP1, and F7) germplasm, resulting in the generation of 8064 mutagenized BonnMu F2‐families. Sequencing of these Mu‐tagged families revealed 425 924 presumptive heritable Mu insertions affecting 36 612 (83%) of the 44 303 high‐confidence gene models of maize (B73v5). On average, we observed 12 Mu insertions per gene (425 924 total insertions/36 612 affected genes) and 53 insertions per BonnMu F2‐family (425 924 total insertions/8064 families). Mu insertions and photos of seedling phenotypes from segregating BonnMu F2‐families can be accessed through the Maize Genetics and Genomics Database (MaizeGDB). Downstream examination via the automated Mutant‐seq Workflow Utility (MuWU) identified 94% of the presumptive germinal insertion sites in genic regions and only a small fraction of 6% inserting in non‐coding intergenic sequences of the genome. Consistently, Mu insertions aligned with gene‐dense chromosomal arms. In total, 42% of all BonnMu insertions were located in the 5′ untranslated region of genes, corresponding to accessible chromatin. Furthermore, for 38% of the insertions (163 843 of 425 924 total insertions) Mu1, Mu8 and MuDR were confirmed to be the causal Mu elements. Our publicly accessible European BonnMu resource has archived insertions covering two major germplasm groups, thus facilitating both forward and reverse genetics studies.
- 25 October 2024
- Published by Wiley in The Plant Journal
- Vol. 120 (5) , 2253-2268
Open AccessExpanding the BonnMu sequence‐indexed repository of transposon induced maize (Zea mays L.) mutations in dent and flint germplasm
SUMMARY: The BonnMu resource is a transposon tagged mutant collection designed for functional genomics studies in maize. To expand this resource, we crossed an active Mutator (Mu) stock with dent (B73, Co125) and flint (DK105, EP1, and F7) germplasm, resulting in the generation of 8064 mutagenized BonnMu F2‐families. Sequencing of these Mu‐tagged families revealed 425 924 presumptive heritable Mu insertions affecting 36 612 (83%) of the 44 303 high‐confidence gene models of maize (B73v5). On average, we observed 12 Mu insertions per gene (425 924 total insertions/36 612 affected genes) and 53 insertions per BonnMu F2‐family (425 924 total insertions/8064 families). Mu insertions and photos of seedling phenotypes from segregating BonnMu F2‐families can be accessed through the Maize Genetics and Genomics Database (MaizeGDB). Downstream examination via the automated Mutant‐seq Workflow Utility (MuWU) identified 94% of the presumptive germinal insertion sites in genic regions and only a small fraction of 6% inserting in non‐coding intergenic sequences of the genome. Consistently, Mu insertions aligned with gene‐dense chromosomal arms. In total, 42% of all BonnMu insertions were located in the 5′ untranslated region of genes, corresponding to accessible chromatin. Furthermore, for 38% of the insertions (163 843 of 425 924 total insertions) Mu1, Mu8 and MuDR were confirmed to be the causal Mu elements. Our publicly accessible European BonnMu resource has archived insertions covering two major germplasm groups, thus facilitating both forward and reverse genetics studies.
- 2 September 2024
- Published by Cold Spring Harbor Laboratory in Cold Spring Harbor Protocols
- Vol. 2025 (9)
Use of Maize (Zea mays L.) Mutator Transposon-Induced Mutants of the BonnMu Resource for Forward and Reverse Genetics Studies
The BonnMu resource represents a tagged collection of maize (Zea mays L.) Mutator (Mu) transposon-induced mutants, designed for functional genomics studies. Here, we describe the use of the BonnMu collection for identifying and characterizing mutations. Specifically, we describe workflows for use in both reverse and forward genetics strategies in maize. For reverse genetics, users first acquire a BonnMu F2 stock of interest based on data accessible at the Maize Genetics and Genomics Database (MaizeGDB). We provide details here for their subsequent propagation and for the confirmation of Mu insertions by genotyping via PCR, with the ultimate goal of establishing genotype–phenotype relationships of interest. For forward genetics studies, we describe a workflow that involves a combined approach of Mutant-Seq (Mu-Seq) and bulked segregant RNA-seq (BSR-Seq), to identify the causal gene underlying a mutant phenotype of interest.
- 2 September 2024
- Published by Cold Spring Harbor Laboratory in Cold Spring Harbor Protocols
- Vol. 2025 (9)
Use of Maize (Zea mays L.) Mutator Transposon-Induced Mutants of the BonnMu Resource for Forward and Reverse Genetics Studies
The BonnMu resource represents a tagged collection of maize (Zea mays L.) Mutator (Mu) transposon-induced mutants, designed for functional genomics studies. Here, we describe the use of the BonnMu collection for identifying and characterizing mutations. Specifically, we describe workflows for use in both reverse and forward genetics strategies in maize. For reverse genetics, users first acquire a BonnMu F2 stock of interest based on data accessible at the Maize Genetics and Genomics Database (MaizeGDB). We provide details here for their subsequent propagation and for the confirmation of Mu insertions by genotyping via PCR, with the ultimate goal of establishing genotype–phenotype relationships of interest. For forward genetics studies, we describe a workflow that involves a combined approach of Mutant-Seq (Mu-Seq) and bulked segregant RNA-seq (BSR-Seq), to identify the causal gene underlying a mutant phenotype of interest.
- 2 September 2024
- Published by Cold Spring Harbor Laboratory in Cold Spring Harbor Protocols
- Vol. 2025 (9)
Identification of Transposon Insertion Sites in Maize Mu-Tagged Mutants Using Mu-Seq
Mutator (Mu) transposons facilitate untargeted insertional mutagenesis in maize by moving within the genome and disrupting genes. Such an approach has been used to generate collections such as the BonnMu resource, a Mu-tagged maize population for functional genomics studies. Mutant-Seq (Mu-Seq) is a sequencing-based method for the high-throughput identification and mapping of Mu insertion sites. The approach involves the construction of multiplexed sequencing libraries (known as Mu-Seq libraries) from Mu-tagged populations, followed by high-throughput sequencing and data processing using the Mu-Seq Workflow Utility (MuWU) tool, to determine the location of Mu insertions. Here, we provide a detailed protocol for Mu-Seq, from the generation of the maize Mu-tagged mutant population to data analysis. Researchers can use this approach to develop mutant collections customized to specific genetic backgrounds of interest, which can aid in characterizing genotype-specific mutations and identifying candidate genes linked to visible mutant phenotypes.
- 2 September 2024
- Published by Cold Spring Harbor Laboratory in Cold Spring Harbor Protocols
- Vol. 2025 (9)
Identification of Transposon Insertion Sites in Maize Mu-Tagged Mutants Using Mu-Seq
Mutator (Mu) transposons facilitate untargeted insertional mutagenesis in maize by moving within the genome and disrupting genes. Such an approach has been used to generate collections such as the BonnMu resource, a Mu-tagged maize population for functional genomics studies. Mutant-Seq (Mu-Seq) is a sequencing-based method for the high-throughput identification and mapping of Mu insertion sites. The approach involves the construction of multiplexed sequencing libraries (known as Mu-Seq libraries) from Mu-tagged populations, followed by high-throughput sequencing and data processing using the Mu-Seq Workflow Utility (MuWU) tool, to determine the location of Mu insertions. Here, we provide a detailed protocol for Mu-Seq, from the generation of the maize Mu-tagged mutant population to data analysis. Researchers can use this approach to develop mutant collections customized to specific genetic backgrounds of interest, which can aid in characterizing genotype-specific mutations and identifying candidate genes linked to visible mutant phenotypes.
- Open Access
Expanding the BonnMu sequence-indexed repository of transposon induced maize ( Zea mays L.) mutations in dent and flint germplasm
The BonnMu resource is a transposon-tagged mutant collection designed for functional genomics studies in maize. To expand this resource, we crossed an active Mutator ( Mu ) line with dent (B73, Co125) and flint (DK105, EP1 and F7) germplasm, resulting in the generation of 8,064 mutagenized BonnMu F 2 -families. Sequencing of these Mu -tagged families revealed 425,924 heritable Mu insertions affecting 36,612 (83%) of the 44,303 high-confidence gene models of maize (B73v5). On average, we observed 12 Mu insertions per gene (425,924 total insertions/ 36,612 affected genes) and 53 insertions per BonnMu F 2 -family (425,924 total insertions/ 8,064 families). Mu insertions and photos of seedling phenotypes from segregating BonnMu F 2 -families can be accessed through the Maize Genetics and Genomics Database (MaizeGDB). Downstream examination via the automated Mutant-seq Workflow Utility (MuWU) identified 94% of the germinal insertion sites in genic regions and only a small fraction of 6% inserting in non-coding intergenic sequences of the genome. Consistently, Mu insertions aligned with gene-dense chromosomal arms. In total, 42% of all BonnMu insertions were located in the 5’ untranslated region (UTR) of genes, corresponding to accessible chromatin. Furthermore, for 38% of the insertions (163,843 of 425,924 total insertions) Mu1 , Mu8 and MuDR were confirmed to be the causal Mu elements. Our publicly accessible European BonnMu resource has archived insertions covering two major germplasm groups, thus facilitating both forward and reverse genetics studies.
Open AccessExpanding the BonnMu sequence-indexed repository of transposon induced maize ( Zea mays L.) mutations in dent and flint germplasm
The BonnMu resource is a transposon-tagged mutant collection designed for functional genomics studies in maize. To expand this resource, we crossed an active Mutator ( Mu ) line with dent (B73, Co125) and flint (DK105, EP1 and F7) germplasm, resulting in the generation of 8,064 mutagenized BonnMu F 2 -families. Sequencing of these Mu -tagged families revealed 425,924 heritable Mu insertions affecting 36,612 (83%) of the 44,303 high-confidence gene models of maize (B73v5). On average, we observed 12 Mu insertions per gene (425,924 total insertions/ 36,612 affected genes) and 53 insertions per BonnMu F 2 -family (425,924 total insertions/ 8,064 families). Mu insertions and photos of seedling phenotypes from segregating BonnMu F 2 -families can be accessed through the Maize Genetics and Genomics Database (MaizeGDB). Downstream examination via the automated Mutant-seq Workflow Utility (MuWU) identified 94% of the germinal insertion sites in genic regions and only a small fraction of 6% inserting in non-coding intergenic sequences of the genome. Consistently, Mu insertions aligned with gene-dense chromosomal arms. In total, 42% of all BonnMu insertions were located in the 5’ untranslated region (UTR) of genes, corresponding to accessible chromatin. Furthermore, for 38% of the insertions (163,843 of 425,924 total insertions) Mu1 , Mu8 and MuDR were confirmed to be the causal Mu elements. Our publicly accessible European BonnMu resource has archived insertions covering two major germplasm groups, thus facilitating both forward and reverse genetics studies.
- Open Access
- 16 February 2024
- Published by Wiley in New Phytologist
- Vol. 242 (1) , 137-153
Suberin deficiency and its effect on the transport physiology of young poplar roots
Summary: The precise functions of suberized apoplastic barriers in root water and nutrient transport physiology have not fully been elucidated. While lots of research has been performed with mutants of Arabidopsis, little to no data are available for mutants of agricultural crop or tree species. By employing a combined set of physiological, histochemical, analytical, and transport physiological methods as well as RNA‐sequencing, this study investigated the implications of remarkable CRISPR/Cas9‐induced suberization defects in young roots of the economically important gray poplar. While barely affecting overall plant development, contrary to literature‐based expectations significant root suberin reductions of up to 80–95% in four independent mutants were shown to not evidently affect the root hydraulic conductivity during non‐stress conditions. In addition, subliminal iron deficiency symptoms and increased translocation of a photosynthesis inhibitor as well as NaCl highlight the involvement of suberin in nutrient transport physiology. The multifaceted nature of the root hydraulic conductivity does not allow drawing simplified conclusions such as that the suberin amount must always be correlated with the water transport properties of roots. However, the decreased masking of plasma membrane surface area could facilitate the uptake but also leakage of beneficial and harmful solutes.
- 16 February 2024
- Published by Wiley in New Phytologist
- Vol. 242 (1) , 137-153
Open AccessSuberin deficiency and its effect on the transport physiology of young poplar roots
Summary: The precise functions of suberized apoplastic barriers in root water and nutrient transport physiology have not fully been elucidated. While lots of research has been performed with mutants of Arabidopsis, little to no data are available for mutants of agricultural crop or tree species. By employing a combined set of physiological, histochemical, analytical, and transport physiological methods as well as RNA‐sequencing, this study investigated the implications of remarkable CRISPR/Cas9‐induced suberization defects in young roots of the economically important gray poplar. While barely affecting overall plant development, contrary to literature‐based expectations significant root suberin reductions of up to 80–95% in four independent mutants were shown to not evidently affect the root hydraulic conductivity during non‐stress conditions. In addition, subliminal iron deficiency symptoms and increased translocation of a photosynthesis inhibitor as well as NaCl highlight the involvement of suberin in nutrient transport physiology. The multifaceted nature of the root hydraulic conductivity does not allow drawing simplified conclusions such as that the suberin amount must always be correlated with the water transport properties of roots. However, the decreased masking of plasma membrane surface area could facilitate the uptake but also leakage of beneficial and harmful solutes.
- Open Access
- 18 September 2023
- Published by Wiley in Plant, Cell & Environment
- Vol. 47 (1) , 91-105
Changes in wax composition but not amount enhance cuticular transpiration
This study focuses on the role of the qualitative leaf wax composition in modulating the cuticular water loss using a Populus × canescens cer6 mutant line, which accumulates C34–C46 wax ester dimers and is reduced in wax monomers >C24. The two literature‐based hypotheses to be tested were the importance of the amount of wax esters and the weighted mean carbon chain length in restricting cuticular water loss. The main results were acquired by chemical analysis of cuticular wax and gravimetric cuticular transpiration measurements. Besides additional physiological measurements, the leaf surface properties were characterised by scanning electron microscopy and spectrophotometric light reflectance quantification. Mutation of the CER6 gene resulted in striking changes in qualitative wax composition but not quantitative wax amount. Based on the strong accumulation of dimeric wax esters, the relative proportion of esters increased to >90%, and the weighted mean carbon chain length increased by >6 carbon atoms. These qualitative alterations were found to increase the cuticular transpiration of leaves by twofold. Our results do not support the hypotheses that enhanced amounts of wax esters or increased weighted mean carbon chain lengths of waxes lead to reduced cuticular transpiration.
- 18 September 2023
- Published by Wiley in Plant, Cell & Environment
- Vol. 47 (1) , 91-105
Open AccessChanges in wax composition but not amount enhance cuticular transpiration
This study focuses on the role of the qualitative leaf wax composition in modulating the cuticular water loss using a Populus × canescens cer6 mutant line, which accumulates C34–C46 wax ester dimers and is reduced in wax monomers >C24. The two literature‐based hypotheses to be tested were the importance of the amount of wax esters and the weighted mean carbon chain length in restricting cuticular water loss. The main results were acquired by chemical analysis of cuticular wax and gravimetric cuticular transpiration measurements. Besides additional physiological measurements, the leaf surface properties were characterised by scanning electron microscopy and spectrophotometric light reflectance quantification. Mutation of the CER6 gene resulted in striking changes in qualitative wax composition but not quantitative wax amount. Based on the strong accumulation of dimeric wax esters, the relative proportion of esters increased to >90%, and the weighted mean carbon chain length increased by >6 carbon atoms. These qualitative alterations were found to increase the cuticular transpiration of leaves by twofold. Our results do not support the hypotheses that enhanced amounts of wax esters or increased weighted mean carbon chain lengths of waxes lead to reduced cuticular transpiration.
- Open Access
- 22 June 2023
- Published by Wiley in New Phytologist
- Vol. 239 (5) , 1903-1918
Isolation and characterization of the gene HvFAR1 encoding acyl‐CoA reductase from the cer‐za.227 mutant of barley (Hordeum vulgare) and analysis of the cuticular barrier functions
Summary: The cuticle is a protective layer covering aerial plant organs. We studied the function of waxes for the establishment of the cuticular barrier in barley (Hordeum vulgare). The barley eceriferum mutants cer‐za.227 and cer‐ye.267 display reduced wax loads, but the genes affected, and the consequences of the wax changes for the barrier function remained unknown. Cuticular waxes and permeabilities were measured in cer‐za.227 and cer‐ye.267. The mutant loci were isolated by bulked segregant RNA sequencing. New cer‐za alleles were generated by genome editing. The CER‐ZA protein was characterized after expression in yeast and Arabidopsis cer4‐3. Cer‐za.227 carries a mutation in HORVU5Hr1G089230 encoding acyl‐CoA reductase (FAR1). The cer‐ye.267 mutation is located to HORVU4Hr1G063420 encoding β‐ketoacyl‐CoA synthase (KAS1) and is allelic to cer‐zh.54. The amounts of intracuticular waxes were strongly decreased in cer‐ye.267. The cuticular water loss and permeability of cer‐za.227 were similar to wild‐type (WT), but were increased in cer‐ye.267. Removal of epicuticular waxes revealed that intracuticular, but not epicuticular waxes are required to regulate cuticular transpiration. The differential decrease in intracuticular waxes between cer‐za.227 and cer‐ye.267, and the removal of epicuticular waxes indicate that the cuticular barrier function mostly depends on the presence of intracuticular waxes.
- 22 June 2023
- Published by Wiley in New Phytologist
- Vol. 239 (5) , 1903-1918
Open AccessIsolation and characterization of the gene HvFAR1 encoding acyl‐CoA reductase from the cer‐za.227 mutant of barley (Hordeum vulgare) and analysis of the cuticular barrier functions
Summary: The cuticle is a protective layer covering aerial plant organs. We studied the function of waxes for the establishment of the cuticular barrier in barley (Hordeum vulgare). The barley eceriferum mutants cer‐za.227 and cer‐ye.267 display reduced wax loads, but the genes affected, and the consequences of the wax changes for the barrier function remained unknown. Cuticular waxes and permeabilities were measured in cer‐za.227 and cer‐ye.267. The mutant loci were isolated by bulked segregant RNA sequencing. New cer‐za alleles were generated by genome editing. The CER‐ZA protein was characterized after expression in yeast and Arabidopsis cer4‐3. Cer‐za.227 carries a mutation in HORVU5Hr1G089230 encoding acyl‐CoA reductase (FAR1). The cer‐ye.267 mutation is located to HORVU4Hr1G063420 encoding β‐ketoacyl‐CoA synthase (KAS1) and is allelic to cer‐zh.54. The amounts of intracuticular waxes were strongly decreased in cer‐ye.267. The cuticular water loss and permeability of cer‐za.227 were similar to wild‐type (WT), but were increased in cer‐ye.267. Removal of epicuticular waxes revealed that intracuticular, but not epicuticular waxes are required to regulate cuticular transpiration. The differential decrease in intracuticular waxes between cer‐za.227 and cer‐ye.267, and the removal of epicuticular waxes indicate that the cuticular barrier function mostly depends on the presence of intracuticular waxes.
- Open Access
- 12 April 2023
- Published by F1000 Research Ltd in F1000Research
- Vol. 11, 1137
A2TEA: Identifying trait-specific evolutionary adaptations
Background: Plants differ in their ability to cope with external stresses (e.g., drought tolerance). Genome duplications are an important mechanism to enable plant adaptation. This leads to characteristic footprints in the genome, such as protein family expansion. We explore genetic diversity and uncover evolutionary adaptation to stresses by exploiting genome comparisons between stress tolerant and sensitive species and RNA-Seq data sets from stress experiments. Expanded gene families that are stress-responsive based on differential expression analysis could hint at species or clade-specific adaptation, making these gene families exciting candidates for follow-up tolerance studies and crop improvement. Software: Integration of such cross-species omics data is a challenging task, requiring various steps of transformation and filtering. Ultimately, visualization is crucial for quality control and interpretation. To address this, we developed A2TEA: Automated Assessment of Trait-specific Evolutionary Adaptations, a Snakemake workflow for detecting adaptation footprints in silico. It functions as a one-stop processing pipeline, integrating protein family, phylogeny, expression, and protein function analyses. The pipeline is accompanied by an R Shiny web application that allows exploring, highlighting, and exporting the results interactively. This allows the user to formulate hypotheses regarding the genomic adaptations of one or a subset of the investigated species to a given stress. Conclusions: While our research focus is on crops, the pipeline is entirely independent of the underlying species and can be used with any set of species. We demonstrate pipeline efficiency on real-world datasets and discuss the implementation and limits of our analysis workflow as well as planned extensions to its current state. The A2TEA workflow and web application are publicly available at: https://github.com/tgstoecker/A2TEA.Workflow and https://github.com/tgstoecker/A2TEA.WebApp, respectively.
- 12 April 2023
- Published by F1000 Research Ltd in F1000Research
- Vol. 11, 1137
Open AccessA2TEA: Identifying trait-specific evolutionary adaptations
Background: Plants differ in their ability to cope with external stresses (e.g., drought tolerance). Genome duplications are an important mechanism to enable plant adaptation. This leads to characteristic footprints in the genome, such as protein family expansion. We explore genetic diversity and uncover evolutionary adaptation to stresses by exploiting genome comparisons between stress tolerant and sensitive species and RNA-Seq data sets from stress experiments. Expanded gene families that are stress-responsive based on differential expression analysis could hint at species or clade-specific adaptation, making these gene families exciting candidates for follow-up tolerance studies and crop improvement. Software: Integration of such cross-species omics data is a challenging task, requiring various steps of transformation and filtering. Ultimately, visualization is crucial for quality control and interpretation. To address this, we developed A2TEA: Automated Assessment of Trait-specific Evolutionary Adaptations, a Snakemake workflow for detecting adaptation footprints in silico. It functions as a one-stop processing pipeline, integrating protein family, phylogeny, expression, and protein function analyses. The pipeline is accompanied by an R Shiny web application that allows exploring, highlighting, and exporting the results interactively. This allows the user to formulate hypotheses regarding the genomic adaptations of one or a subset of the investigated species to a given stress. Conclusions: While our research focus is on crops, the pipeline is entirely independent of the underlying species and can be used with any set of species. We demonstrate pipeline efficiency on real-world datasets and discuss the implementation and limits of our analysis workflow as well as planned extensions to its current state. The A2TEA workflow and web application are publicly available at: https://github.com/tgstoecker/A2TEA.Workflow and https://github.com/tgstoecker/A2TEA.WebApp, respectively.
- Open Access
- 5 October 2022
- Published by F1000 Research Ltd in F1000Research
- Vol. 11, 1137
A2TEA: Identifying trait-specific evolutionary adaptations
Background: Plants differ in their ability to cope with external stresses (e.g., drought tolerance). Genome duplications are an important mechanism to enable plant adaptation. This leads to characteristic footprints in the genome, such as protein family expansion. We explore genetic diversity and uncover evolutionary adaptation to stresses by exploiting genome comparisons between stress tolerant and sensitive species and RNA-Seq data sets from stress experiments. Expanded gene families that are stress-responsive based on differential expression analysis could hint at species or clade-specific adaptation, making these gene families exciting candidates for follow-up tolerance studies and crop improvement. Software: Integration of such cross-species omics data is a challenging task, requiring various steps of transformation and filtering. Ultimately, visualization is crucial for quality control and interpretation. To address this, we developed A2TEA: Automated Assessment of Trait-specific Evolutionary Adaptations, a Snakemake workflow for detecting adaptation footprints in silico. It functions as a one-stop processing pipeline, integrating protein family, phylogeny, expression, and protein function analysis. The pipeline is accompanied by an R Shiny web application that allows exploring, highlighting, and exporting the results interactively. This allows the user to formulate hypotheses regarding the genomic adaptations of one or a subset of the investigated species to a given stress. Conclusions: While our research focus is on crops, the pipeline is entirely independent of the underlying species and can be used with any set of species. We demonstrate pipeline efficiency on real-world datasets and discuss the implementation and limits of our analysis workflow as well as planned extensions to its current state. The A2TEA workflow and web application are publicly available at: https://github.com/tgstoecker/A2TEA.Workflow and https://github.com/tgstoecker/A2TEA.WebApp, respectively.
- 5 October 2022
- Published by F1000 Research Ltd in F1000Research
- Vol. 11, 1137
Open AccessA2TEA: Identifying trait-specific evolutionary adaptations
Background: Plants differ in their ability to cope with external stresses (e.g., drought tolerance). Genome duplications are an important mechanism to enable plant adaptation. This leads to characteristic footprints in the genome, such as protein family expansion. We explore genetic diversity and uncover evolutionary adaptation to stresses by exploiting genome comparisons between stress tolerant and sensitive species and RNA-Seq data sets from stress experiments. Expanded gene families that are stress-responsive based on differential expression analysis could hint at species or clade-specific adaptation, making these gene families exciting candidates for follow-up tolerance studies and crop improvement. Software: Integration of such cross-species omics data is a challenging task, requiring various steps of transformation and filtering. Ultimately, visualization is crucial for quality control and interpretation. To address this, we developed A2TEA: Automated Assessment of Trait-specific Evolutionary Adaptations, a Snakemake workflow for detecting adaptation footprints in silico. It functions as a one-stop processing pipeline, integrating protein family, phylogeny, expression, and protein function analysis. The pipeline is accompanied by an R Shiny web application that allows exploring, highlighting, and exporting the results interactively. This allows the user to formulate hypotheses regarding the genomic adaptations of one or a subset of the investigated species to a given stress. Conclusions: While our research focus is on crops, the pipeline is entirely independent of the underlying species and can be used with any set of species. We demonstrate pipeline efficiency on real-world datasets and discuss the implementation and limits of our analysis workflow as well as planned extensions to its current state. The A2TEA workflow and web application are publicly available at: https://github.com/tgstoecker/A2TEA.Workflow and https://github.com/tgstoecker/A2TEA.WebApp, respectively.
- Open Access
- 29 September 2021
- Published by Oxford University Press (OUP) in Bioinformatics
- Vol. 38 (3) , 837-838
MuWU: Mutant-seq library analysis and annotation
Insertional mutagenesis allows for the creation of loss-of-function mutations on a genome-wide scale. In theory, every gene can be ‘knocked out’ via the insertion of an additional DNA sequence. Resources of sequence-indexed mutants of plant and animal model organisms are instrumental for functional genomics studies. Such repositories significantly speed up the acquisition of interesting genotypes and allow for the validation of hypotheses regarding phenotypic consequences in reverse genetics. To create such resources, comprehensive sequencing of flanking sequence tags using protocols such as Mutant-seq requires various downstream computational tasks, and these need to be performed in an efficient and reproducible manner. Here, we present MuWU, an automated Mutant-seq workflow utility initially created for the identification of Mutator insertion sites of the BonnMu resource, representing a reverse genetics mutant collection for functional genetics in maize (Zea mays). MuWU functions as a fast, one-stop downstream processing pipeline of Mutant-seq reads. It takes care of all complex bioinformatic tasks, such as identifying tagged genes and differentiating between germinal and somatic mutations/insertions. Furthermore, MuWU automatically assigns insertions to the corresponding mutated seed stocks. We discuss the implementation and how parameters can easily be adapted to use MuWU for other species/transposable elements. MuWU is a Snakemake-based workflow and freely available at https://github.com/tgstoecker/MuWU. Supplementary data are available at Bioinformatics online.
- 29 September 2021
- Published by Oxford University Press (OUP) in Bioinformatics
- Vol. 38 (3) , 837-838
Open AccessMuWU: Mutant-seq library analysis and annotation
Insertional mutagenesis allows for the creation of loss-of-function mutations on a genome-wide scale. In theory, every gene can be ‘knocked out’ via the insertion of an additional DNA sequence. Resources of sequence-indexed mutants of plant and animal model organisms are instrumental for functional genomics studies. Such repositories significantly speed up the acquisition of interesting genotypes and allow for the validation of hypotheses regarding phenotypic consequences in reverse genetics. To create such resources, comprehensive sequencing of flanking sequence tags using protocols such as Mutant-seq requires various downstream computational tasks, and these need to be performed in an efficient and reproducible manner. Here, we present MuWU, an automated Mutant-seq workflow utility initially created for the identification of Mutator insertion sites of the BonnMu resource, representing a reverse genetics mutant collection for functional genetics in maize (Zea mays). MuWU functions as a fast, one-stop downstream processing pipeline of Mutant-seq reads. It takes care of all complex bioinformatic tasks, such as identifying tagged genes and differentiating between germinal and somatic mutations/insertions. Furthermore, MuWU automatically assigns insertions to the corresponding mutated seed stocks. We discuss the implementation and how parameters can easily be adapted to use MuWU for other species/transposable elements. MuWU is a Snakemake-based workflow and freely available at https://github.com/tgstoecker/MuWU. Supplementary data are available at Bioinformatics online.