Mattia Dallapiccola

The buildings sector is one of the least sustainable activities in the world, accounting for around 40% of the total global energy demand. With the aim to reduce the environmental impact of this sector, the use of renewable energy sources coupled with energy storage systems in buildings has been investigated in recent years. Innovative solutions for cooling, heating, and domestic hot water in buildings can contribute to the buildings’ decarbonization by achieving a reduction of building electrical consumption needed to keep comfortable conditions. However, the environmental impact of a new system is not only related to its electrical consumption from the grid, but also to the environmental load produced in the manufacturing and disposal stages of system components. This study investigates the environmental impact of an innovative system proposed for residential buildings in Mediterranean climate through a life cycle assessment. The results show that, due to the complexity of the system, the manufacturing and disposal stages have a high environmental impact, which is not compensated by the reduction of the impact during the operational stage. A parametric study was also performed to investigate the effect of the design of the storage system on the overall system impact.

With the aim of contributing to achieving the decarbonization of the energy sector, the environmental impact of an innovative system to produce heating and domestic hot water for heating demand-dominated climates is assessed is evaluated. The evaluation is conducted using the life cycle assessment (LCA) methodology and the ReCiPe and IPCC GWP indicators for the manufacturing and operation stages, and comparing the system to a reference one. Results show that the innovative system has a lower overall impact than the reference one. Moreover, a parametric study to evaluate the impact of the refrigerant is carried out, showing that the impact of the overall systems is not affected if the amount of refrigerant or the impact of refrigerant is increased.

The ambitious environmental goals set by the 2030 Climate Target Plan can be reached with a strong contribution coming from the residential sector and the exploitation of its flexibility, intended as the capacity of a building to shift its consumption to maximize the use of renewable energy. In the literature, the impact of flexibility has been mainly studied for the optimization of the control logic, assuming that the photovoltaic system and the electric storage have already been installed. Conversely, in this work, we adopt a different perspective that analyses the system from the designer point of view. Different scenarios with a variable degree of flexibility have been created and tested in a residential district considering various demand profiles (i.e., home appliances, heat pumps, and electric vehicles consumption). The profiles have been then used as input for an optimization tool that can design the optimal system according to a specific target function. Firstly, the system has been optimized according to economic indicators. However, results suggested that adopting only an economic perspective in the design phase could lead to results that are not in line with the European environmental targets. Thus, the system has been optimized also considering energy indicators to design a system that could give a relevant contribution to the energy transition of the residential sector. Results suggest that demand flexibility coupled with storage can boost the installation of photovoltaic systems due to the improved economic profitability and at the same time guarantee a relevant contribution to the decarbonization of the sector.