Norulsamani Abdullah
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Norulsamani Abdullah has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
R. Saidur
8 shared publications- Kim Han Tan
Research Centre for Nano-Materials and Energy Technology (RCNMET), Faculty of Engineering and Technology, Sunway University, No. 5, Jalan Universiti, Bandar Sunway, 47500, Selangor Darul Ehsan, Malaysia
4 shared publications - Kee Shyuan Loh
Fuel Cell Institute, Universiti Kebangsaan Malaysia, Bangi 43600, Selangor, Malaysia
3 shared publications - Siti Kartom Kamarudin
Fuel Cell Institute Universiti Kebangsaan Malaysia Bangi Selangor Malaysia
3 shared publications Abu Zaed
2 shared publicationsAdarsh Kumar Pandey
2 shared publications
Latest Publications
- 22 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (83) , 20915-20918
KOH-assisted centrifugation-free separation of Ti 3 C 2 T x MXene for cost-effective supercapacitors
A rapid 30-second protocol provides a highly scalable and cost-effective blueprint for producing potential MXene-based supercapacitors.
- 22 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (83) , 20915-20918
KOH-assisted centrifugation-free separation of Ti 3 C 2 T x MXene for cost-effective supercapacitors
A rapid 30-second protocol provides a highly scalable and cost-effective blueprint for producing potential MXene-based supercapacitors.
- 20 December 2025
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 229
Seawater as a sustainable feedstock for hydrogen production: Problems, solutions, and potential insights
- 20 December 2025
- Published by Elsevier in Renewable and Sustainable Energy Reviews
- Vol. 229
Seawater as a sustainable feedstock for hydrogen production: Problems, solutions, and potential insights
- 24 September 2024
- Published by Wiley in The Chemical Record
- Vol. 24 (10) , e202400062
Empowering Green Energy Storage Systems with MXene for a Sustainable Future
Green energy storage systems play a vital role in enabling a sustainable future by facilitating the efficient integration and utilization of renewable energy sources. The main problems related to two‐dimensional (2D) materials are their difficult synthesis process, high cost, and bulk production, which hamper their performance. In recent years, MXenes have emerged as highly promising materials for enhancing the performance of energy storage devices due to their unique properties, including their high surface area, excellent electrical and thermal conductivity, and exceptional chemical stability. This paper presents a comprehensive scientific approach that explores the potential of MXenes for empowering green energy storage systems. Which indicates the novelty of the article. The paper reviews the latest advances in MXene synthesis techniques. Furthermore, investigates the application of MXenes in various energy storage technologies, such as lithium‐ion batteries, supercapacitors, and emerging energy storage devices. The utilization of MXenes as electrodes in flexible and transparent energy storage devices is also discussed. Moreover, the paper highlights the potential of MXenes in addressing key challenges in energy storage, including enhancing energy storage capacity, improving cycling stability, and promoting fast charging and discharging rates. Additionally, industrial application and cost estimation of MXenes are explored. As the output of the work, we analyzed that HF and modified acid (LiF and HCl) are the established methods for synthesis. Due to high electrical conductivity, MXene materials are showing extraordinary results in energy storage and related applications. Making a composite hydrothermal method is one of the established methods. This scientific paper underscores the significant contributions of MXenes in advancing green energy storage systems, paving the way for a sustainable future driven by renewable energy sources. To facilitate the research, this article includes technical challenges and future recommendations for further research gaps in the topic.
- 24 September 2024
- Published by Wiley in The Chemical Record
- Vol. 24 (10) , e202400062
Empowering Green Energy Storage Systems with MXene for a Sustainable Future
Green energy storage systems play a vital role in enabling a sustainable future by facilitating the efficient integration and utilization of renewable energy sources. The main problems related to two‐dimensional (2D) materials are their difficult synthesis process, high cost, and bulk production, which hamper their performance. In recent years, MXenes have emerged as highly promising materials for enhancing the performance of energy storage devices due to their unique properties, including their high surface area, excellent electrical and thermal conductivity, and exceptional chemical stability. This paper presents a comprehensive scientific approach that explores the potential of MXenes for empowering green energy storage systems. Which indicates the novelty of the article. The paper reviews the latest advances in MXene synthesis techniques. Furthermore, investigates the application of MXenes in various energy storage technologies, such as lithium‐ion batteries, supercapacitors, and emerging energy storage devices. The utilization of MXenes as electrodes in flexible and transparent energy storage devices is also discussed. Moreover, the paper highlights the potential of MXenes in addressing key challenges in energy storage, including enhancing energy storage capacity, improving cycling stability, and promoting fast charging and discharging rates. Additionally, industrial application and cost estimation of MXenes are explored. As the output of the work, we analyzed that HF and modified acid (LiF and HCl) are the established methods for synthesis. Due to high electrical conductivity, MXene materials are showing extraordinary results in energy storage and related applications. Making a composite hydrothermal method is one of the established methods. This scientific paper underscores the significant contributions of MXenes in advancing green energy storage systems, paving the way for a sustainable future driven by renewable energy sources. To facilitate the research, this article includes technical challenges and future recommendations for further research gaps in the topic.
- Open Access
- 6 February 2024
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 488, 01002
Optimizing Electrospinning Parameters for Enhanced Diameter Control of Composite Nanofibers in Direct Methanol Fuel Cells (DMFCs)
This study investigates the impact of electrospinning parameters, particularly focusing on the applied voltage parameter, on the diameter of TCNFs composite nanofibers for application in direct methanol fuel cells (DMFCs). The electrospun nanofibers are comprehensively characterized using fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), Brunauer–Emmett–Teller (BET) analysis and electrochemical techniques of cyclic voltammetry (CV). The results revealed that the optimal applied voltage is 16 kV for TCNFs nanofiber, resulting in an average nanofiber diameter of 161.18 nm. Furthermore, the electrochemically characterized composite nanofibers of PtRu/TCNFs demonstrate exceptional performance, achieving a peak current density of 265.33 mAmgPtRu-1, surpassing PtRu/C by 3.35 times. The comprehensive analysis contributes valuable insights for tailoring nanofiber design to enhance electrocatalytic performance, paving the way for advancements in DMFC technology.
- 6 February 2024
- Published by EDP Sciences in E3S Web of Conferences
- Vol. 488, 01002
Open AccessOptimizing Electrospinning Parameters for Enhanced Diameter Control of Composite Nanofibers in Direct Methanol Fuel Cells (DMFCs)
This study investigates the impact of electrospinning parameters, particularly focusing on the applied voltage parameter, on the diameter of TCNFs composite nanofibers for application in direct methanol fuel cells (DMFCs). The electrospun nanofibers are comprehensively characterized using fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), Brunauer–Emmett–Teller (BET) analysis and electrochemical techniques of cyclic voltammetry (CV). The results revealed that the optimal applied voltage is 16 kV for TCNFs nanofiber, resulting in an average nanofiber diameter of 161.18 nm. Furthermore, the electrochemically characterized composite nanofibers of PtRu/TCNFs demonstrate exceptional performance, achieving a peak current density of 265.33 mAmgPtRu-1, surpassing PtRu/C by 3.35 times. The comprehensive analysis contributes valuable insights for tailoring nanofiber design to enhance electrocatalytic performance, paving the way for advancements in DMFC technology.
- Open Access
- 12 December 2023
- Published by Elsevier in Open Ceramics
- Vol. 17
Cost analysis of MXene for low-cost production, and pinpointing of its economic footprint
- 12 December 2023
- Published by Elsevier in Open Ceramics
- Vol. 17
Open AccessCost analysis of MXene for low-cost production, and pinpointing of its economic footprint
- 5 May 2023
- Published by Wiley in The Chemical Record
- Vol. 24 (1) , e202300092
Evolution of Vanadium Redox Flow Battery in Electrode
The vanadium redox flow battery (VRFB) is a highly regarded technology for large‐scale energy storage due to its outstanding features, such as scalability, efficiency, long lifespan, and site independence. This paper provides a comprehensive analysis of its performance in carbon‐based electrodes, along with a comprehensive review of the system‘s principles and mechanisms. It discusses potential applications, recent industrial involvement, and economic factors associated with VRFB technology. The study also covers the latest advancements in VRFB electrodes, including electrode surface modification and electrocatalyst materials, and highlights their effects on the VRFB system‘s performance. Additionally, the potential of two‐dimensional material MXene to enhance electrode performance is evaluated, and the author concludes that MXenes offer significant advantages for use in high‐power VRFB at a low cost. Finally, the paper reviews the challenges and future development of VRFB technology.
- 5 May 2023
- Published by Wiley in The Chemical Record
- Vol. 24 (1) , e202300092
Evolution of Vanadium Redox Flow Battery in Electrode
The vanadium redox flow battery (VRFB) is a highly regarded technology for large‐scale energy storage due to its outstanding features, such as scalability, efficiency, long lifespan, and site independence. This paper provides a comprehensive analysis of its performance in carbon‐based electrodes, along with a comprehensive review of the system‘s principles and mechanisms. It discusses potential applications, recent industrial involvement, and economic factors associated with VRFB technology. The study also covers the latest advancements in VRFB electrodes, including electrode surface modification and electrocatalyst materials, and highlights their effects on the VRFB system‘s performance. Additionally, the potential of two‐dimensional material MXene to enhance electrode performance is evaluated, and the author concludes that MXenes offer significant advantages for use in high‐power VRFB at a low cost. Finally, the paper reviews the challenges and future development of VRFB technology.
- Open Access
Investigation of the Electrochemical Performance of Titanium-Based MXene Hybridisation with Rice Husk Ash (RHA) as an Anode Catalyst Support Material
MXenes possess unique features that are useful for broader industrial development. However, although many different compositions of MXenes have been discovered, little research has been conducted on the optimal synthesis strategy for producing the best MXenes yield. Therefore, substantial work is performed on the synthesis’ structure and property relationship for direct methanol fuel cell (DMFC) applications since MXenes have been successfully hybridised with rice husk ash (RHA). In this study, to produce titanium-based MXene, Ti3C2 nanopowders are added to the rice husk ash matrix to synthesise hybrid RHA/MXene composites (R-MX). Using different weight percentages of MXene hybridised with rice husk ash (2 wt. % R-MX, 4 wt. % R-MX and 6 wt. % R-MX), different electrochemical properties are obtained. Meanwhile, electrochemical analysis is undertaken to investigate the methanol oxidation performance using Linear Sweep Voltammetry (LSV). The highest percentage of the R-MX hybrid composite, 6 wt. % MXene, showed the lowest Tafel slope (148 mV/dec) and the highest ionic exchange current density in the same Tafel analysis. Moreover, the incorporation of MXene into RHA produced good results from the chronoamperometry analysis (CA), with the highest percentage of the hybrid composite, R-6MX, showing the highest retention rate of 97.28%. Meanwhile, the Nyquist plot analysis showed an increasing semicircle arc diameter at the lower-frequency region, implying a lower interfacial charge resistance upon the addition of MXene into RHA. This outcome corresponded to the CA and LSV analysis findings, R-6MX showed a remarkable performance in terms of having the highest peak current density of 0.9454 mA/cm2 and retention rate of 97.28%. Both of these values show that hybrid R-6MX was able to maintain a high current for the entire duration. The current is maintained in a stable form for some time, proving that R-6MX was the most stable, with a minimal corrosion reaction and tolerance in a methanol medium. The results from this study enabled an evaluation of the possibility of utilising low-cost, green RHA material for fuel cell applications to promote sustainability. The novelty of this work is that a cheap source of silica-based RHA, a type of waste material, is incorporated with MXene through hybridisation processes.
Open AccessInvestigation of the Electrochemical Performance of Titanium-Based MXene Hybridisation with Rice Husk Ash (RHA) as an Anode Catalyst Support Material
MXenes possess unique features that are useful for broader industrial development. However, although many different compositions of MXenes have been discovered, little research has been conducted on the optimal synthesis strategy for producing the best MXenes yield. Therefore, substantial work is performed on the synthesis’ structure and property relationship for direct methanol fuel cell (DMFC) applications since MXenes have been successfully hybridised with rice husk ash (RHA). In this study, to produce titanium-based MXene, Ti3C2 nanopowders are added to the rice husk ash matrix to synthesise hybrid RHA/MXene composites (R-MX). Using different weight percentages of MXene hybridised with rice husk ash (2 wt. % R-MX, 4 wt. % R-MX and 6 wt. % R-MX), different electrochemical properties are obtained. Meanwhile, electrochemical analysis is undertaken to investigate the methanol oxidation performance using Linear Sweep Voltammetry (LSV). The highest percentage of the R-MX hybrid composite, 6 wt. % MXene, showed the lowest Tafel slope (148 mV/dec) and the highest ionic exchange current density in the same Tafel analysis. Moreover, the incorporation of MXene into RHA produced good results from the chronoamperometry analysis (CA), with the highest percentage of the hybrid composite, R-6MX, showing the highest retention rate of 97.28%. Meanwhile, the Nyquist plot analysis showed an increasing semicircle arc diameter at the lower-frequency region, implying a lower interfacial charge resistance upon the addition of MXene into RHA. This outcome corresponded to the CA and LSV analysis findings, R-6MX showed a remarkable performance in terms of having the highest peak current density of 0.9454 mA/cm2 and retention rate of 97.28%. Both of these values show that hybrid R-6MX was able to maintain a high current for the entire duration. The current is maintained in a stable form for some time, proving that R-6MX was the most stable, with a minimal corrosion reaction and tolerance in a methanol medium. The results from this study enabled an evaluation of the possibility of utilising low-cost, green RHA material for fuel cell applications to promote sustainability. The novelty of this work is that a cheap source of silica-based RHA, a type of waste material, is incorporated with MXene through hybridisation processes.