Noa Afik
Research Subjects
Noa Afik has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Michael Volokh
Department of Chemistry Ben‐Gurion University of the Negev Beer‐Sheva Israel
4 shared publications - Taleb Mokari
Department of Chemistry, Ben-Gurion University of the Negev, Beer-Sheva 8410501, Israel
4 shared publications Iman Alkrenawi
Department of Chemistry
3 shared publications- Sandhiya Murugesan
Department of Chemistry, Ben-Gurion University of the Negev, Beer-Sheva 8410501, Israel
3 shared publications - Karam Shreteh
Department of Chemistry, Ben-Gurion University of the Negev, Beer-Sheva 8410501, Israel
2 shared publications - Oren Regev
Ben-Gurion University of the Negev
2 shared publications
Latest Publications
- 29 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Rational Design of Different Morphologies of Ammonium Vanadium–Chromium Oxide Nanostructures: Mechanistic Insights and Ammonium Storage
At the nanoscale, control over size, composition, and morphology is paramount, representing the ultimate challenge in material design. In this study, we report a synthesis of ammonium vanadium-chromium oxide nanomaterials by controlling temperature and the precursor addition order. A hydrothermal process enables the formation of three distinct morphologies, nanosheets, nanowires, and nanoflowers, each exhibiting a layered structure with integrated ammonium and oxygen defects. Mechanistic studies reveal that the addition sequence influences the vanadia coordination environment, where a balanced interplay between tetrahedral and square pyramidal configurations directs the formation of either elongated or planar structures. Notably, the nanowires show enhanced specific capacitance for NH4+ ion storage, underscoring the promise of these materials for supercapacitor applications and the critical impact of the synthesis protocol on nanomaterial performance.
- 29 August 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
Rational Design of Different Morphologies of Ammonium Vanadium–Chromium Oxide Nanostructures: Mechanistic Insights and Ammonium Storage
At the nanoscale, control over size, composition, and morphology is paramount, representing the ultimate challenge in material design. In this study, we report a synthesis of ammonium vanadium-chromium oxide nanomaterials by controlling temperature and the precursor addition order. A hydrothermal process enables the formation of three distinct morphologies, nanosheets, nanowires, and nanoflowers, each exhibiting a layered structure with integrated ammonium and oxygen defects. Mechanistic studies reveal that the addition sequence influences the vanadia coordination environment, where a balanced interplay between tetrahedral and square pyramidal configurations directs the formation of either elongated or planar structures. Notably, the nanowires show enhanced specific capacitance for NH4+ ion storage, underscoring the promise of these materials for supercapacitor applications and the critical impact of the synthesis protocol on nanomaterial performance.
- 3 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (1) , 376-387
Ammonium Vanadium Oxide Hydrate/Porous Activated Carbon Nanocomposite for High Energy Density Aqueous Ammonium Ion Storage
- 3 January 2025
- Published by American Chemical Society (ACS) in ACS Applied Energy Materials
- Vol. 8 (1) , 376-387
Ammonium Vanadium Oxide Hydrate/Porous Activated Carbon Nanocomposite for High Energy Density Aqueous Ammonium Ion Storage
- 4 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (37) , 49868-49879
Supercapattery-Diode: Using Layered Double Hydroxide Nanosheets for Unidirectional Energy Storage
The supercapacitor-diode (CAPode) is a device that integrates the functionality of an ionic diode with that of a conventional supercapacitor. The unique combination of energy storage and rectification properties in CAPodes is relevant for iontronics, alternate current rectifiers, logic operations, grid stabilization, and even biomedical applications. Here, we propose a novel aqueous-phase supercapattery-diode with excellent energy storage [total specific capacity (CT) = 162 C g-1, energy density = 34 W h kg-1 at 1.0 A g-1] as well as rectifying properties [rectification ratio I (RRI) of 23, and rectification ratio II (RRII) of 0.98]; the unidirectional energy storage is achieved by the utilization of an ion-selective redox reaction of battery-type layered double hydroxide (LDH) nanosheets serving as the electroactive material as well as asymmetric device configuration of supercapattery-diode in the KOH electrolyte. This work expands the types of CAPodes and importantly exemplifies the significance of integrating battery-type LDH and their redox chemistry, allowing a simultaneous increase in charge storage and rectification properties.
- 4 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (37) , 49868-49879
Supercapattery-Diode: Using Layered Double Hydroxide Nanosheets for Unidirectional Energy Storage
The supercapacitor-diode (CAPode) is a device that integrates the functionality of an ionic diode with that of a conventional supercapacitor. The unique combination of energy storage and rectification properties in CAPodes is relevant for iontronics, alternate current rectifiers, logic operations, grid stabilization, and even biomedical applications. Here, we propose a novel aqueous-phase supercapattery-diode with excellent energy storage [total specific capacity (CT) = 162 C g-1, energy density = 34 W h kg-1 at 1.0 A g-1] as well as rectifying properties [rectification ratio I (RRI) of 23, and rectification ratio II (RRII) of 0.98]; the unidirectional energy storage is achieved by the utilization of an ion-selective redox reaction of battery-type layered double hydroxide (LDH) nanosheets serving as the electroactive material as well as asymmetric device configuration of supercapattery-diode in the KOH electrolyte. This work expands the types of CAPodes and importantly exemplifies the significance of integrating battery-type LDH and their redox chemistry, allowing a simultaneous increase in charge storage and rectification properties.
- 30 September 2020
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 5 (10) , 3274-3280
Vegetable-Oil-Based Intelligent Ink for Oxygen Sensing
An oil-based composite is employed to monitor the exposure to oxygen inside food packaging, aiming at evaluating the package integrity and the freshness of food. The composite is an oxygen-sensitive printable ink consisting of electrically conductive silver microflakes, embedded in a vegetable oil matrix. The sensitivity of the oil to oxygen is driven by its high content of unsaturated fatty acids that polymerize and shrink upon exposure to atmospheric oxygen. Shrinkage increases the silver concentration and induces percolation, manifested by a steep increase in the electrical conductivity of the composite. We found that the electrical conductivity of the composite is related to its exposure time to air. Employing linseed oil as a matrix demonstrates an increase in electrical conductivity from 10–11 to 10–3 S/cm after only 6 days of exposure to air. We also show that this time span could be modified by changing the oil type to fit various expiration periods of food products.
- 30 September 2020
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 5 (10) , 3274-3280
Vegetable-Oil-Based Intelligent Ink for Oxygen Sensing
An oil-based composite is employed to monitor the exposure to oxygen inside food packaging, aiming at evaluating the package integrity and the freshness of food. The composite is an oxygen-sensitive printable ink consisting of electrically conductive silver microflakes, embedded in a vegetable oil matrix. The sensitivity of the oil to oxygen is driven by its high content of unsaturated fatty acids that polymerize and shrink upon exposure to atmospheric oxygen. Shrinkage increases the silver concentration and induces percolation, manifested by a steep increase in the electrical conductivity of the composite. We found that the electrical conductivity of the composite is related to its exposure time to air. Employing linseed oil as a matrix demonstrates an increase in electrical conductivity from 10–11 to 10–3 S/cm after only 6 days of exposure to air. We also show that this time span could be modified by changing the oil type to fit various expiration periods of food products.
- Open Access
Sensing Exposure Time to Oxygen by Applying a Percolation-Induced Principle
The determination of food freshness along manufacturer-to-consumer transportation lines is a challenging problem that calls for cheap, simple, reliable, and nontoxic sensors inside food packaging. We present a novel approach for oxygen sensing in which the exposure time to oxygen—rather than the oxygen concentration per se—is monitored. We developed a nontoxic hybrid composite-based sensor consisting of graphite powder (conductive filler), clay (viscosity control filler) and linseed oil (the matrix). Upon exposure to oxygen, the insulating linseed oil is oxidized, leading to polymerization and shrinkage of the matrix and hence to an increase in the concentration of the electrically conductive graphite powder up to percolation, which serves as an indicator of food spoilage. In the developed sensor, the exposure time to oxygen (days to weeks) is obtained by measuring the electrical conductivity though the sensor. The sensor functionality could be tuned by changing the oil viscosity, the aspect ratio of the conductive filler, and/or the concentration of the clay, thereby adapting the sensor to monitoring the quality of food products with different sensitivities to oxygen exposure time (e.g., fish vs grain).
Open AccessSensing Exposure Time to Oxygen by Applying a Percolation-Induced Principle
The determination of food freshness along manufacturer-to-consumer transportation lines is a challenging problem that calls for cheap, simple, reliable, and nontoxic sensors inside food packaging. We present a novel approach for oxygen sensing in which the exposure time to oxygen—rather than the oxygen concentration per se—is monitored. We developed a nontoxic hybrid composite-based sensor consisting of graphite powder (conductive filler), clay (viscosity control filler) and linseed oil (the matrix). Upon exposure to oxygen, the insulating linseed oil is oxidized, leading to polymerization and shrinkage of the matrix and hence to an increase in the concentration of the electrically conductive graphite powder up to percolation, which serves as an indicator of food spoilage. In the developed sensor, the exposure time to oxygen (days to weeks) is obtained by measuring the electrical conductivity though the sensor. The sensor functionality could be tuned by changing the oil viscosity, the aspect ratio of the conductive filler, and/or the concentration of the clay, thereby adapting the sensor to monitoring the quality of food products with different sensitivities to oxygen exposure time (e.g., fish vs grain).
- Open Access
- 20 February 2018
- Published by Wiley in Advanced Sustainable Systems
- Vol. 2 (4)
Design of Hierarchal 3D Metal Oxide Structures for Water Oxidation and Purification
Given their unique properties, tremendous progress is realized in the use of nanostructured materials for various applications. However, their incorporation and fabrication into prototypic devices remain challenging due to their limited ability to form hierarchical 3D structures through the use of large scale, low cost, and facile processes. Herein, this challenge is addressed and the growth of unique hierarchical structures is demonstrated by coating calcareous foraminiferal shells with metal oxide materials via simple and inexpensive processes conducted on a large scale. Foraminifera are highly diverse and abundant marine unicellular protists surrounded by large, ranging from 0.1 mm to more than 200 mm in size, identical porous, and complex hierarchical shells. In the present study, these hierarchal structures are investigated in electrochemical water oxidation reactions and tested in terms of their ability to purify water from inorganic (metal ions) contaminates. The remarkable performances of the prototype filters and catalysts developed here, among the best recorded values in both fields, are reported. These findings thus open new perspectives for catalytic and water purification applications.
- 20 February 2018
- Published by Wiley in Advanced Sustainable Systems
- Vol. 2 (4)
Open AccessDesign of Hierarchal 3D Metal Oxide Structures for Water Oxidation and Purification
Given their unique properties, tremendous progress is realized in the use of nanostructured materials for various applications. However, their incorporation and fabrication into prototypic devices remain challenging due to their limited ability to form hierarchical 3D structures through the use of large scale, low cost, and facile processes. Herein, this challenge is addressed and the growth of unique hierarchical structures is demonstrated by coating calcareous foraminiferal shells with metal oxide materials via simple and inexpensive processes conducted on a large scale. Foraminifera are highly diverse and abundant marine unicellular protists surrounded by large, ranging from 0.1 mm to more than 200 mm in size, identical porous, and complex hierarchical shells. In the present study, these hierarchal structures are investigated in electrochemical water oxidation reactions and tested in terms of their ability to purify water from inorganic (metal ions) contaminates. The remarkable performances of the prototype filters and catalysts developed here, among the best recorded values in both fields, are reported. These findings thus open new perspectives for catalytic and water purification applications.