Adam Balvanz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adam Balvanz has a total of 144 co-authors. Here are the top co-authors by number of shared publications:
- Mercouri G. Kanatzidis
Northwestern University
13 shared publications - Christos D. Malliakas
Northwestern University
4 shared publications - Edward Hartley Sargent
Department of electrical and computer engineering, University of Toronto, Toronto, Ontario, M5S 3G4, Canada
3 shared publications - Ram Seshadri
University of California Santa Barbara
3 shared publications - Thomas S. Ie
Northwestern University
3 shared publications - Vinayak P. Dravid
Department of Materials Science and Engineering Northwestern University Evanston Illinois USA
3 shared publications
Latest Publications
- 27 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
Heteroanionic Tuning of Cooperative Ta Off-Centering in Quasi-One-Dimensional CsTaS3− x Cl x Semiconductors
The structural behavior of CsTaS3 was investigated alongside that of the new heteroanionic compound CsTaS2.16Cl0.84, synthesized via the reaction of Ta and S in a CsCl flux. Single-crystal X-ray diffraction reveals that both compounds are isostructural, crystallizing in the centrosymmetric hexagonal space group P63/mmc with split Ta positions along the face-sharing octahedral chain direction. Pair distribution function analysis of both compounds, supported by STEM imaging of CsTaS3, identifies the local intrachain displacement motif as cooperative Ta sliding rather than alternating Ta−Ta dimerization. While X-ray absorption near-edge spectroscopy (XANES) confirms the decrease of the average oxidation state in CsTaS2.16Cl0.84, the same structural distortion persists, albeit now with a reduced magnitude. Both materials are semiconducting, and Cl incorporation increases the band gap from ∼1.00 eV in CsTaS3 to ∼1.12 eV in the heteroanionic phase. Single-crystal detectors fabricated from CsTaS2.16Cl0.84 exhibit high resistivity, which effectively suppresses dark current and enhances signal-to-noise performance. These devices deliver an X-ray sensitivity of 7470 μC Gyair−1 cm−2, demonstrating efficient charge generation and collection under irradiation.
- 27 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
Heteroanionic Tuning of Cooperative Ta Off-Centering in Quasi-One-Dimensional CsTaS3− x Cl x Semiconductors
The structural behavior of CsTaS3 was investigated alongside that of the new heteroanionic compound CsTaS2.16Cl0.84, synthesized via the reaction of Ta and S in a CsCl flux. Single-crystal X-ray diffraction reveals that both compounds are isostructural, crystallizing in the centrosymmetric hexagonal space group P63/mmc with split Ta positions along the face-sharing octahedral chain direction. Pair distribution function analysis of both compounds, supported by STEM imaging of CsTaS3, identifies the local intrachain displacement motif as cooperative Ta sliding rather than alternating Ta−Ta dimerization. While X-ray absorption near-edge spectroscopy (XANES) confirms the decrease of the average oxidation state in CsTaS2.16Cl0.84, the same structural distortion persists, albeit now with a reduced magnitude. Both materials are semiconducting, and Cl incorporation increases the band gap from ∼1.00 eV in CsTaS3 to ∼1.12 eV in the heteroanionic phase. Single-crystal detectors fabricated from CsTaS2.16Cl0.84 exhibit high resistivity, which effectively suppresses dark current and enhances signal-to-noise performance. These devices deliver an X-ray sensitivity of 7470 μC Gyair−1 cm−2, demonstrating efficient charge generation and collection under irradiation.
- 26 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (21) , 10934-10949
Alloy-Assisted Formation of Vanadium-Rich Thiophosphates with Enhanced Charge Transport and Glassy Magnetism
Vanadium-based thiophosphates in the MPQ3/M2P2Q6 family provide an unusual platform for coupling mixed-metal valence, metal vacancies, and 2D magnetism, but access to phase-pure multimetal solid solutions with verified chemical homogeneity remains limited. Here, we show that multication alloying provides a route to incorporating V into layered thiophosphates while retaining the mixed-valent, vacancy-containing character of V2−xP2S6. This approach yields Fe1.25V0.6P2S6, Ni1.25V0.6P2S6, Co1.25V0.6P2S6, and high-entropy V-containing compositions. Single-crystal X-ray diffraction (scXRD) and electron energy-loss spectroscopy (EELS) mapping confirm formation of layered single-phase alloys and chemical uniformity both across the surface and through the flake thickness. Optical measurements show semiconducting band gaps spanning ∼1.33−1.66 eV, while temperature-dependent transport reveals markedly enhanced conductivity and low activation energies (∼0.2−0.3 eV) relative to conventional divalent TM2P2S6 analogs. Oxidation-state mapping indicates robust mixed-valent V2+/V3+ character consistent with defect-assisted hopping and self-doping linked to vanadium vacancies, likely causing enhanced conductivity. Magnetic measurements further show composition-dependent behavior, consistent with magnetic frustration and glassy components in Fe1.25V0.6P2S6 and (VMnFeCoNi)2P2S6, highlighting the role of multimetal disorder in shaping exchange interactions. Together, these results establish a route to phase-pure, conductive V-containing thiophosphate alloys and expand the tunable design space for coupled transport and magnetism in layered chalcophosphates.
- 26 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (21) , 10934-10949
Alloy-Assisted Formation of Vanadium-Rich Thiophosphates with Enhanced Charge Transport and Glassy Magnetism
Vanadium-based thiophosphates in the MPQ3/M2P2Q6 family provide an unusual platform for coupling mixed-metal valence, metal vacancies, and 2D magnetism, but access to phase-pure multimetal solid solutions with verified chemical homogeneity remains limited. Here, we show that multication alloying provides a route to incorporating V into layered thiophosphates while retaining the mixed-valent, vacancy-containing character of V2−xP2S6. This approach yields Fe1.25V0.6P2S6, Ni1.25V0.6P2S6, Co1.25V0.6P2S6, and high-entropy V-containing compositions. Single-crystal X-ray diffraction (scXRD) and electron energy-loss spectroscopy (EELS) mapping confirm formation of layered single-phase alloys and chemical uniformity both across the surface and through the flake thickness. Optical measurements show semiconducting band gaps spanning ∼1.33−1.66 eV, while temperature-dependent transport reveals markedly enhanced conductivity and low activation energies (∼0.2−0.3 eV) relative to conventional divalent TM2P2S6 analogs. Oxidation-state mapping indicates robust mixed-valent V2+/V3+ character consistent with defect-assisted hopping and self-doping linked to vanadium vacancies, likely causing enhanced conductivity. Magnetic measurements further show composition-dependent behavior, consistent with magnetic frustration and glassy components in Fe1.25V0.6P2S6 and (VMnFeCoNi)2P2S6, highlighting the role of multimetal disorder in shaping exchange interactions. Together, these results establish a route to phase-pure, conductive V-containing thiophosphate alloys and expand the tunable design space for coupled transport and magnetism in layered chalcophosphates.
- Open Access
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (39) , 18987-18998
Hidden tellurium speciation resolves the paradox of infinite Te chains in LaCu x Te 2
Instead of infinite tellurium chains, LaCu x Te 2 intrinsically forms a statistically disordered collinear arrangement of monotelluride and oligotelluride species, yielding semiconducting transport and quasi-linear magnetoresistance at low temperatures.
- 15 October 2026
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (39) , 18987-18998
Open AccessHidden tellurium speciation resolves the paradox of infinite Te chains in LaCu x Te 2
Instead of infinite tellurium chains, LaCu x Te 2 intrinsically forms a statistically disordered collinear arrangement of monotelluride and oligotelluride species, yielding semiconducting transport and quasi-linear magnetoresistance at low temperatures.
- 28 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 37909-37929
Mapping and Controlling Dimensional Polymorphism and Bandgap Bowing in Cs3Bi2– x Sb x I9
A3M2X9 halides (A = Rb, Cs; M = Sb, Bi; X = Cl, Br, I) are a major class of lead-free, perovskite-related semiconductors in which polymorphism and dimensionality provide powerful levers for tuning electronic structure. Cs3Bi2–xSbxI9 exemplifies this behavior, exhibiting 0D (α) and 2D (β) polymorphs whose synthetic accessibility varies strongly with composition, temperature, and sealed-ampule conditions. Here, we establish a protocol-dependent accessibility map (i.e., the α/β (or mixed-phase) and CsI outcome as a function of composition, thermal protocol, and the sealed-ampule environment that governs SbI3-mediated transport/concomitant CsI formation) for the Cs3Bi2–xSbxI9 polymorphs. We show that the α-polymorph is accessible across the full Bi/Sb range, whereas the production of predominantly the β-polymorph is restricted to Sb-rich compositions at room temperature (x ≥ 1.42) and is favored under lower-temperature conditions consistent with minimized SbI3 vapor/CsI production. Density functional theory indicates both polymorphs are locally stable, with the α-phase lower in energy but with a diminishing α–β energy gap as Sb content increases, supporting the increased energetic accessibility of the corner-sharing β-phase structures in the Sb-rich regime. Variable-temperature powder X-ray diffraction directly captures high-temperature α ↔ β interconversion in Bi-rich samples. Optoelectronic measurements reveal band gap bowing across the α-series (Eg = 1.89–2.08 eV; b = 0.11 ± 0.02 eV) and a Bi-dependent reduction of Eg in the β-series (1.79–1.95 eV), consistent with calculated band-edge orbital character. The results highlight that vapor-phase halide chemistry and polymorph/phase identity can be decisive hidden variables in composition–property relationships for lead-free perovskite-related semiconductors.
- 28 August 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (35) , 37909-37929
Mapping and Controlling Dimensional Polymorphism and Bandgap Bowing in Cs3Bi2– x Sb x I9
A3M2X9 halides (A = Rb, Cs; M = Sb, Bi; X = Cl, Br, I) are a major class of lead-free, perovskite-related semiconductors in which polymorphism and dimensionality provide powerful levers for tuning electronic structure. Cs3Bi2–xSbxI9 exemplifies this behavior, exhibiting 0D (α) and 2D (β) polymorphs whose synthetic accessibility varies strongly with composition, temperature, and sealed-ampule conditions. Here, we establish a protocol-dependent accessibility map (i.e., the α/β (or mixed-phase) and CsI outcome as a function of composition, thermal protocol, and the sealed-ampule environment that governs SbI3-mediated transport/concomitant CsI formation) for the Cs3Bi2–xSbxI9 polymorphs. We show that the α-polymorph is accessible across the full Bi/Sb range, whereas the production of predominantly the β-polymorph is restricted to Sb-rich compositions at room temperature (x ≥ 1.42) and is favored under lower-temperature conditions consistent with minimized SbI3 vapor/CsI production. Density functional theory indicates both polymorphs are locally stable, with the α-phase lower in energy but with a diminishing α–β energy gap as Sb content increases, supporting the increased energetic accessibility of the corner-sharing β-phase structures in the Sb-rich regime. Variable-temperature powder X-ray diffraction directly captures high-temperature α ↔ β interconversion in Bi-rich samples. Optoelectronic measurements reveal band gap bowing across the α-series (Eg = 1.89–2.08 eV; b = 0.11 ± 0.02 eV) and a Bi-dependent reduction of Eg in the β-series (1.79–1.95 eV), consistent with calculated band-edge orbital character. The results highlight that vapor-phase halide chemistry and polymorph/phase identity can be decisive hidden variables in composition–property relationships for lead-free perovskite-related semiconductors.
- 25 August 2026
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 126 (17) , 9875-9986
Low-Dimensional Perovskites and Metal Halides across Structures and Functions: Connectivity, Dimensionality, and Emerging Principles
Hybrid metal halides have experienced rapid growth in research activity, achieving remarkable advances over the past decade and a half. This expansion stems from valuable traits including synthetic and optoelectronic tunability, high absorption coefficients, solution processability, and high defect tolerance. Studies on these materials have expanded from 3D perovskites to include their low- dimensional 2D counterparts, whose performance and improved stability have made them model systems for various applications, yet this progress has only begun to scratch the surface of structural possibilities. Other low-dimensional metal halides, including perovskitoids and nonperovskite structures, remain far less explored despite offering immense structural diversity and functional potential. In this Review, we provide an updated, integrative perspective on these overlooked systems. We begin by describing synthetic strategies for low-dimensional metal halides, covering both established and emerging approaches. We then examine structural motifs, illustrating how octahedral connectivity defines dimensionality and lattice architecture. Optoelectronic properties follow, focusing on how composition, distortion, and the organic spacer chemistry modulate optical and electronic behavior in these materials. A dedicated section highlights optoelectronically active organics. Finally, we address stability and degradation mechanisms and feature recent advances and representative case studies, including their translation into thin films and next-generation optoelectronic and radiation-detection devices. The advances achieved to date reveal general principles that connect dimensionality, connectivity, and organic–inorganic interactions across the full landscape of hybrid metal halides, while also exposing the limits of current predictive understanding. The remaining challenge is to translate these qualitative insights into design rules that reliably link structure to function and guide the deliberate creation of next-generation low-dimensional materials.
- 25 August 2026
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 126 (17) , 9875-9986
Low-Dimensional Perovskites and Metal Halides across Structures and Functions: Connectivity, Dimensionality, and Emerging Principles
Hybrid metal halides have experienced rapid growth in research activity, achieving remarkable advances over the past decade and a half. This expansion stems from valuable traits including synthetic and optoelectronic tunability, high absorption coefficients, solution processability, and high defect tolerance. Studies on these materials have expanded from 3D perovskites to include their low- dimensional 2D counterparts, whose performance and improved stability have made them model systems for various applications, yet this progress has only begun to scratch the surface of structural possibilities. Other low-dimensional metal halides, including perovskitoids and nonperovskite structures, remain far less explored despite offering immense structural diversity and functional potential. In this Review, we provide an updated, integrative perspective on these overlooked systems. We begin by describing synthetic strategies for low-dimensional metal halides, covering both established and emerging approaches. We then examine structural motifs, illustrating how octahedral connectivity defines dimensionality and lattice architecture. Optoelectronic properties follow, focusing on how composition, distortion, and the organic spacer chemistry modulate optical and electronic behavior in these materials. A dedicated section highlights optoelectronically active organics. Finally, we address stability and degradation mechanisms and feature recent advances and representative case studies, including their translation into thin films and next-generation optoelectronic and radiation-detection devices. The advances achieved to date reveal general principles that connect dimensionality, connectivity, and organic–inorganic interactions across the full landscape of hybrid metal halides, while also exposing the limits of current predictive understanding. The remaining challenge is to translate these qualitative insights into design rules that reliably link structure to function and guide the deliberate creation of next-generation low-dimensional materials.
- Open Access
- 31 October 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (1) , 526-543
Tuning optical properties and local lone-pair off-centering in “hollow” FA 1− x { en } x Pb η − y Sn y Br 3 perovskites
The synthesis, structural, and optoelectronic characterization of the family of FA 1− x en x Pb η − y Sn y Br 3 hollow metal halide perovskites highlighting the interplay between the local structure dynamics and optical properties.
- 31 October 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (1) , 526-543
Open AccessTuning optical properties and local lone-pair off-centering in “hollow” FA 1− x { en } x Pb η − y Sn y Br 3 perovskites
The synthesis, structural, and optoelectronic characterization of the family of FA 1− x en x Pb η − y Sn y Br 3 hollow metal halide perovskites highlighting the interplay between the local structure dynamics and optical properties.
- 27 January 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (5) , 2403-2414
Interplay between Two Structure Types in the Incommensurately Modulated A14+2/3Ta8Se46+2/3 Compounds (A = Rb, Cs)
Incommensurately modulated crystals are a rare class of materials that are notoriously difficult to characterize properly. We have synthesized two new incommensurately modulated compounds, Rb14+2/3Ta8Se46+2/3 and Cs14+2/3Ta8Se46+2/3, based on the M2Q11 (M = Nb, Ta; Q = S, Se) unit using high-temperature solid-state synthesis. Using superspace crystallography in combination with second harmonic generation measurements, we confirmed both materials to be noncentrosymmetric, falling into the superspace group P1(αβγ)0, while the basic cell suggests C2/c. These materials can be structurally understood as ordered combinations of two known structure types, A6Ta4Se22 and A12Ta6Se35 (A = K, Rb, Cs). While both modulated compounds share structural similarities with the aforementioned known phases, they represent novel structures rather than a literal combination of the two phases, such as a composite. Additionally, both Rb14+2/3Ta8Se46+2/3 and Cs14+2/3Ta8Se46+2/3 were optically and thermally characterized, revealing identical band gaps of 1.63 eV and congruent melting points at 434 and 417 °C, respectively.
- 27 January 2025
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 64 (5) , 2403-2414
Interplay between Two Structure Types in the Incommensurately Modulated A14+2/3Ta8Se46+2/3 Compounds (A = Rb, Cs)
Incommensurately modulated crystals are a rare class of materials that are notoriously difficult to characterize properly. We have synthesized two new incommensurately modulated compounds, Rb14+2/3Ta8Se46+2/3 and Cs14+2/3Ta8Se46+2/3, based on the M2Q11 (M = Nb, Ta; Q = S, Se) unit using high-temperature solid-state synthesis. Using superspace crystallography in combination with second harmonic generation measurements, we confirmed both materials to be noncentrosymmetric, falling into the superspace group P1(αβγ)0, while the basic cell suggests C2/c. These materials can be structurally understood as ordered combinations of two known structure types, A6Ta4Se22 and A12Ta6Se35 (A = K, Rb, Cs). While both modulated compounds share structural similarities with the aforementioned known phases, they represent novel structures rather than a literal combination of the two phases, such as a composite. Additionally, both Rb14+2/3Ta8Se46+2/3 and Cs14+2/3Ta8Se46+2/3 were optically and thermally characterized, revealing identical band gaps of 1.63 eV and congruent melting points at 434 and 417 °C, respectively.
- 6 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (46) , 31836-31848
Unveiling the Monoclinic Phase in CsPbBr3–xClx Perovskite Crystals, Phase Transition Suppression and High Energy Resolution γ-Ray Detection
All-inorganic CsPbBr3 and CsPbCl3 perovskites are promising materials for high-performance solar cells and advanced radiation detection technologies with high stability. Here we report that CsPbBr3-xClx (x = 0-3) crystals exhibit eutectoid behavior for the melting points and phase transition temperatures. The well-known halide perovskite cubic phase transition temperature shifts near room temperature (∼37 °C for CsPbBr2Cl). We conducted an extensive crystallographic analysis on single crystals of 7 different compositions, including the end members CsPbBr3 and CsPbCl3. Contrary to previous beliefs, we discovered they exhibit a monoclinic structure with space group symmetry P21/m at room temperature, rather than the orthorhombic Pnma. This new structural model is more precise and features a unit cell volume that is four times larger than that of the orthorhombic model. From high-quality single crystals of CsPbBr2Cl, grown by the Bridgman method, we constructed γ-ray detectors achieving an energy resolution of 7.2% at 200 V for 57Co radiation. Thermally stimulated current spectroscopy of the CsPbBr2Cl samples revealed that the defect densities in crystals from different regions of the ingot were relatively uniform, with values of ∼4.72 × 1012 and ∼5.09 × 1012 cm-3. These findings indicate that low deep-level defect densities can be achieved that are consistent with the notable performance of the CsPbBr2Cl perovskite as a high-energy γ radiation detector.
- 6 November 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (46) , 31836-31848
Unveiling the Monoclinic Phase in CsPbBr3–xClx Perovskite Crystals, Phase Transition Suppression and High Energy Resolution γ-Ray Detection
All-inorganic CsPbBr3 and CsPbCl3 perovskites are promising materials for high-performance solar cells and advanced radiation detection technologies with high stability. Here we report that CsPbBr3-xClx (x = 0-3) crystals exhibit eutectoid behavior for the melting points and phase transition temperatures. The well-known halide perovskite cubic phase transition temperature shifts near room temperature (∼37 °C for CsPbBr2Cl). We conducted an extensive crystallographic analysis on single crystals of 7 different compositions, including the end members CsPbBr3 and CsPbCl3. Contrary to previous beliefs, we discovered they exhibit a monoclinic structure with space group symmetry P21/m at room temperature, rather than the orthorhombic Pnma. This new structural model is more precise and features a unit cell volume that is four times larger than that of the orthorhombic model. From high-quality single crystals of CsPbBr2Cl, grown by the Bridgman method, we constructed γ-ray detectors achieving an energy resolution of 7.2% at 200 V for 57Co radiation. Thermally stimulated current spectroscopy of the CsPbBr2Cl samples revealed that the defect densities in crystals from different regions of the ingot were relatively uniform, with values of ∼4.72 × 1012 and ∼5.09 × 1012 cm-3. These findings indicate that low deep-level defect densities can be achieved that are consistent with the notable performance of the CsPbBr2Cl perovskite as a high-energy γ radiation detector.
- 30 September 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (40) , 27793-27803
Anomalous Behavior in Dark–Bright Splitting Impacts the Biexciton Binding Energy in (BA)2(MA)n−1PbnBr3n+1 (n = 1–3)
Two-dimensional Ruddlesden-Popper series are an excellent system for tuning physical properties of the perovskite by controlling the layer number (n). For instance, bandgap and exciton binding energies of the series gradually increase upon reducing n via enhanced quantum and dielectric confinements. Here, we present findings that challenge the anticipated trend in electron-hole exchange interaction within (BA)(2)MA(n-1)Pb(n)Br(3n+1) (n = 1-3), which causes spin-dependent exciton level splitting into bright and dark states, where the latter is partially visible near the surface of the Br-based two-dimensional Ruddlesden-Popper series. Contrary to expectations, the smallest gap between bright and dark exciton levels is observed from n = 2 at 10 K. This anomaly results in the strongest biexciton binding between two dark excitons occurring at n = 2, rather than at n = 1 as initially hypothesized. The observed anomaly arises from a phase transition induced by octahedral tilting occurring only for n = 2 near 100 K as confirmed by temperature-dependent optical and X-ray diffraction measurements. Our results show that Coulomb interaction need not vary gradually with n, which can impact the optoelectronic properties of the Ruddlesden-Popper series.
- 30 September 2024
- Published by American Chemical Society (ACS) in ACS Nano
- Vol. 18 (40) , 27793-27803
Anomalous Behavior in Dark–Bright Splitting Impacts the Biexciton Binding Energy in (BA)2(MA)n−1PbnBr3n+1 (n = 1–3)
Two-dimensional Ruddlesden-Popper series are an excellent system for tuning physical properties of the perovskite by controlling the layer number (n). For instance, bandgap and exciton binding energies of the series gradually increase upon reducing n via enhanced quantum and dielectric confinements. Here, we present findings that challenge the anticipated trend in electron-hole exchange interaction within (BA)(2)MA(n-1)Pb(n)Br(3n+1) (n = 1-3), which causes spin-dependent exciton level splitting into bright and dark states, where the latter is partially visible near the surface of the Br-based two-dimensional Ruddlesden-Popper series. Contrary to expectations, the smallest gap between bright and dark exciton levels is observed from n = 2 at 10 K. This anomaly results in the strongest biexciton binding between two dark excitons occurring at n = 2, rather than at n = 1 as initially hypothesized. The observed anomaly arises from a phase transition induced by octahedral tilting occurring only for n = 2 near 100 K as confirmed by temperature-dependent optical and X-ray diffraction measurements. Our results show that Coulomb interaction need not vary gradually with n, which can impact the optoelectronic properties of the Ruddlesden-Popper series.
- 15 August 2024
- Published by Springer Nature in Nature Energy
- Vol. 9 (11) , 1388-1396
Diamine chelates for increased stability in mixed Sn–Pb and all-perovskite tandem solar cells
- 15 August 2024
- Published by Springer Nature in Nature Energy
- Vol. 9 (11) , 1388-1396
Diamine chelates for increased stability in mixed Sn–Pb and all-perovskite tandem solar cells