Mateusz Stajuda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Mateusz Stajuda has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
- Grzegorz Liśkiewicz
Łódź University of Technology
2 shared publications - Andrzej Jaeschke
Institute of Turbomachinery, Lodz University of Technology, Wólczańska 217/221, 93-005 Łódź, Poland
1 shared publication - David Garcia Cava
The University of Edinburgh
1 shared publication - Filip Grapow
Institute of Turbomachinery, Łódź University of Technology, 90-924 Łódź, Poland
1 shared publication - Kirill Kabalyk
Institute of Turbomachinery, Lodz University of Technology, Wólczańska 217/221, 93-005 Łódź, Poland
1 shared publication - Michal Kulak
Institute of Turbomachinery, Lodz University of Technology, 90-924 Lodz, Poland
1 shared publication
Latest Publications
- Open Access
- 16 July 2021
- Published by ASME International
Cyclostationary Approach for Instabilities Detection and Condition Monitoring of Centrifugal Compressor
This work aims at exploiting Cyclostationarity for instabilities detection and operating conditions monitoring for centrifugal compressors, with the ultimate goal of creating intelligent machine controller. Cyclostationary is a widely employed signal analysis method, deriving from telecommunications. It was proven useful for analysis of vibration, acoustic and pressure data for
- 16 July 2021
- Published by ASME International
Open AccessCyclostationary Approach for Instabilities Detection and Condition Monitoring of Centrifugal Compressor
This work aims at exploiting Cyclostationarity for instabilities detection and operating conditions monitoring for centrifugal compressors, with the ultimate goal of creating intelligent machine controller. Cyclostationary is a widely employed signal analysis method, deriving from telecommunications. It was proven useful for analysis of vibration, acoustic and pressure data for
- Open Access
Unstable Flow Structures Present at Different Rotational Velocities of the Centrifugal Compressor
Unstable flow structures cause inevitable energy losses in all power energy systems, including turbomachines. In this study, a set of analyses was conducted with the use of spectral maps on the pressure signals obtained from an industrial centrifugal compressor. The spectral maps provide one a detailed visualization of the flow conditions present in the machine along the performance curve and to distinguish the flow phenomena present prior to the surge. The method accuracy is especially useful in detecting the inlet recirculation. The study was conducted at four impeller rotational speeds with varying loads imposed by a valve at the outlet. At each speed, the machine experienced different stages of unstable flow conditions prior to the surge. Five main frequency peaks that appeared in all cases were identified and discussed. The surge was observed at all impeller speeds. At lower ones, however, it appeared at higher valve closures. At higher speeds, the surge was much more intense. The study has also shown that the inlet recirculation appears also for the closed-type industrial impeller. The phenomenon was present in all conditions. The higher impeller speed, the faster onset of the inlet recirculation was. This structure has a strong potential for an early instability warning because it appears in various types of impellers, has a very particular spectral structure and its positioning is very predictable. This study gives another example of the inlet recirculation universality and potential for efficient anti-surge protection.
Open AccessUnstable Flow Structures Present at Different Rotational Velocities of the Centrifugal Compressor
Unstable flow structures cause inevitable energy losses in all power energy systems, including turbomachines. In this study, a set of analyses was conducted with the use of spectral maps on the pressure signals obtained from an industrial centrifugal compressor. The spectral maps provide one a detailed visualization of the flow conditions present in the machine along the performance curve and to distinguish the flow phenomena present prior to the surge. The method accuracy is especially useful in detecting the inlet recirculation. The study was conducted at four impeller rotational speeds with varying loads imposed by a valve at the outlet. At each speed, the machine experienced different stages of unstable flow conditions prior to the surge. Five main frequency peaks that appeared in all cases were identified and discussed. The surge was observed at all impeller speeds. At lower ones, however, it appeared at higher valve closures. At higher speeds, the surge was much more intense. The study has also shown that the inlet recirculation appears also for the closed-type industrial impeller. The phenomenon was present in all conditions. The higher impeller speed, the faster onset of the inlet recirculation was. This structure has a strong potential for an early instability warning because it appears in various types of impellers, has a very particular spectral structure and its positioning is very predictable. This study gives another example of the inlet recirculation universality and potential for efficient anti-surge protection.