Oksana V. Germider
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Oksana V. Germider has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Vasilii N. Popov
Northern (Arctic) Federal University named after M.V. Lomonosov, Arkhangelsk, Russia
18 shared publications V N Popov
Northern (Arctic) Federal University named after M.V. Lomonosov, 17, Severnaya Dvina Emb., Arkhangelsk, 163002, Russia
6 shared publicationsA. A. Yushkanov
Moscow State Regional University
4 shared publicationsNorthern (Arctic) Federal University named after M. V. Lomonosov
3 shared publicationsV. N. Popov
Lomonosov Northern Arctic Federal University
3 shared publicationsA A Yushkanov
Moscow State Regional University, 10A, Radio, Moscow, 105005, Russia
1 shared publication
Latest Publications
- 1 April 2026
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 67 (2) , 328-341
Mathematical Modeling of the Stress–Strain State of a Thin Isotropic Nanoplate
An equilibrium equation for a thin isotropic nanoplate with boundary conditions is obtained using the nonlocal theory of microstructural deformation of thin plates. An approach is proposed to construct a solution to this equation for a rectangular nanoplate hinged at the ends using Chebyshev polynomials of the first kind and the collocation method. The deflection of the nanoplate midplane and the bending moments are analyzed as functions of a nonlocal nanoscale parameter.
- 1 April 2026
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 67 (2) , 328-341
Mathematical Modeling of the Stress–Strain State of a Thin Isotropic Nanoplate
An equilibrium equation for a thin isotropic nanoplate with boundary conditions is obtained using the nonlocal theory of microstructural deformation of thin plates. An approach is proposed to construct a solution to this equation for a rectangular nanoplate hinged at the ends using Chebyshev polynomials of the first kind and the collocation method. The deflection of the nanoplate midplane and the bending moments are analyzed as functions of a nonlocal nanoscale parameter.
- 1 April 2026
- Published by Pleiades Publishing Ltd in Computational Mathematics and Mathematical Physics
- Vol. 66 (4) , 732-748
Mathematical Modeling of Bending of a Thin Orthotropic Rectangular Plate Based on Couple Stress Theory
A two-parameter mathematical model is developed for studying the strain state of a thin orthotropic nanoplate of constant thickness subjected to an arbitrary transverse load. Assuming that the deformation conditions are isothermal and the displacements of the plate points are small compared to the plate thickness, a differential equation for the nanoplate deflection is derived from the minimum total free energy condition, taking into account the curvature tensor components under small rotation at the microlevel. A solution to this equation for a rectangular nanoplate is constructed with Chebyshev polynomials of the first kind used as a basis in a Hilbert function space. The coefficients in the expansion of the approximating function in terms of these polynomials are found using the collocation method. The roots of Chebyshev polynomials of the first kind are used as collocation points. The error of the constructed solution is estimated in the norm of the Banach space of essentially bounded functions. The plate deflection under constant and distributed loading for which there is an analytical solution is computed and analyzed depending on nonlocal length scale parameters.
- 1 April 2026
- Published by Pleiades Publishing Ltd in Computational Mathematics and Mathematical Physics
- Vol. 66 (4) , 732-748
Mathematical Modeling of Bending of a Thin Orthotropic Rectangular Plate Based on Couple Stress Theory
A two-parameter mathematical model is developed for studying the strain state of a thin orthotropic nanoplate of constant thickness subjected to an arbitrary transverse load. Assuming that the deformation conditions are isothermal and the displacements of the plate points are small compared to the plate thickness, a differential equation for the nanoplate deflection is derived from the minimum total free energy condition, taking into account the curvature tensor components under small rotation at the microlevel. A solution to this equation for a rectangular nanoplate is constructed with Chebyshev polynomials of the first kind used as a basis in a Hilbert function space. The coefficients in the expansion of the approximating function in terms of these polynomials are found using the collocation method. The roots of Chebyshev polynomials of the first kind are used as collocation points. The error of the constructed solution is estimated in the norm of the Banach space of essentially bounded functions. The plate deflection under constant and distributed loading for which there is an analytical solution is computed and analyzed depending on nonlocal length scale parameters.
- 1 January 2026
- Published by Irkutsk State University in The Bulletin of Irkutsk State University. Series Mathematics
- Vol. 55 (55) , 15-30
On the Collocation Method in Constructing a Solution to the Bending Equation for a Long Rectangular Nanoplate
Within the framework of the theory of microstructural deformation, a new approach is proposed for constructing a solution to the bending equation of a long rectangular nanoplate that is under the influence of a transverse load. The proposed approach is based on the collocation method using a system of orthogonal Chebyshev polynomials of the first kind. The bending function is represented as a partial sum of a series of these polynomials. The roots of Chebyshev polynomials of the first kind are chosen as the collocation points. By sequentially multiplying the left and right sides of the resulting matrix equation by the inverse matrix to the matrix with the values of Chebyshev polynomials at the collocation points and by the generalized inverse matrix to the degenerate matrix of differentiation of these polynomials, the equation of the bending surface, taking into account boundary conditions, is reduced to a system of linear algebraic equations with respect to unknown coefficients in the representation of the solution. In this case, the elements of each of these matrices are presented explicitly. An estimate of the error of the constructed solution based on an infinite norm is obtained. The results of the conducted computational experiments are presented, which demonstrate the effectiveness of the proposed approach.
- 1 January 2026
- Published by Irkutsk State University in The Bulletin of Irkutsk State University. Series Mathematics
- Vol. 55 (55) , 15-30
On the Collocation Method in Constructing a Solution to the Bending Equation for a Long Rectangular Nanoplate
Within the framework of the theory of microstructural deformation, a new approach is proposed for constructing a solution to the bending equation of a long rectangular nanoplate that is under the influence of a transverse load. The proposed approach is based on the collocation method using a system of orthogonal Chebyshev polynomials of the first kind. The bending function is represented as a partial sum of a series of these polynomials. The roots of Chebyshev polynomials of the first kind are chosen as the collocation points. By sequentially multiplying the left and right sides of the resulting matrix equation by the inverse matrix to the matrix with the values of Chebyshev polynomials at the collocation points and by the generalized inverse matrix to the degenerate matrix of differentiation of these polynomials, the equation of the bending surface, taking into account boundary conditions, is reduced to a system of linear algebraic equations with respect to unknown coefficients in the representation of the solution. In this case, the elements of each of these matrices are presented explicitly. An estimate of the error of the constructed solution based on an infinite norm is obtained. The results of the conducted computational experiments are presented, which demonstrate the effectiveness of the proposed approach.
- Open Access
- 26 February 2025
- Published by National Research Mordovia State University MRSU in Zhurnal Srednevolzhskogo Matematicheskogo Obshchestva
- Vol. 27 (1)
On the method of solving nonlinear Fredholm integral equation of the second kind with piecewise-smooth kernels
The work is devoted to the development of iterative methods for solving nonlinear Fredholm integral equations of the second kind with piecewise-smooth kernels. A new approach to constructing their solutions is proposed which combines the method of successive approximations with polynomial interpolations of functions on the segment $[-1,\,1]$. In this case, the original integral equation is reduced to a Volterra-type equation where the unknown function is defined on the segment mentioned. The free term of the equation is chosen as the initial approximation. At each iteration of successive approximations method, the kernel of the integral equation is represented as a partial sum of a series in Chebyshev polynomials orthogonal on the segment $[-1,\,1]$. The coefficients in this expansion are found using the orthogonality of vectors formed by the values of these polynomials at the zeros of the polynomial whose degree is equal to the number of unknown coefficients. An approximation of the solution is made by interpolation of the obtained values of the solution at the Chebyshev nodes at each iteration. The work also constructs a solution to an integral equation whose free term has a discontinuity point of the first kind. The results of the computational experiments are presented, which demonstrate the effectiveness of the proposed approach.- 26 February 2025
- Published by National Research Mordovia State University MRSU in Zhurnal Srednevolzhskogo Matematicheskogo Obshchestva
- Vol. 27 (1)
Open AccessOn the method of solving nonlinear Fredholm integral equation of the second kind with piecewise-smooth kernels
The work is devoted to the development of iterative methods for solving nonlinear Fredholm integral equations of the second kind with piecewise-smooth kernels. A new approach to constructing their solutions is proposed which combines the method of successive approximations with polynomial interpolations of functions on the segment $[-1,\,1]$. In this case, the original integral equation is reduced to a Volterra-type equation where the unknown function is defined on the segment mentioned. The free term of the equation is chosen as the initial approximation. At each iteration of successive approximations method, the kernel of the integral equation is represented as a partial sum of a series in Chebyshev polynomials orthogonal on the segment $[-1,\,1]$. The coefficients in this expansion are found using the orthogonality of vectors formed by the values of these polynomials at the zeros of the polynomial whose degree is equal to the number of unknown coefficients. An approximation of the solution is made by interpolation of the obtained values of the solution at the Chebyshev nodes at each iteration. The work also constructs a solution to an integral equation whose free term has a discontinuity point of the first kind. The results of the computational experiments are presented, which demonstrate the effectiveness of the proposed approach. - 1 January 2025
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. Applied Mathematics. Computer Science. Control Processes
- Vol. 21 (3) , 329-344
Mathematical modeling of deformed state of a thin orthotropic nanoplate
Within the framework of the nonlocal microstructural deformation of thin plates using the variational principle, an equilibrium equation for a thin homogeneous orthotropic nanoplate under a normally distributed load along its surface with boundary conditions is obtained. The solution for a rectangular nanoplate with supported edges is constructed using Chebyshev polynomials as a basis system of functions and a collocation method. The results of calculating the bending of the nanoplate under the action of a constant and sinusoidal distributed transverse loads are presented for different values of the nonlocal nanoscale length scale parameter. An analysis of deviations of the constructed solution using Chebyshev polynomials from the analytical solution of the problem is carried out in the infinite norm. The influence of the nanoscale parameter on the bending of nanoplate and bending moments is studied.
- 1 January 2025
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. Applied Mathematics. Computer Science. Control Processes
- Vol. 21 (3) , 329-344
Mathematical modeling of deformed state of a thin orthotropic nanoplate
Within the framework of the nonlocal microstructural deformation of thin plates using the variational principle, an equilibrium equation for a thin homogeneous orthotropic nanoplate under a normally distributed load along its surface with boundary conditions is obtained. The solution for a rectangular nanoplate with supported edges is constructed using Chebyshev polynomials as a basis system of functions and a collocation method. The results of calculating the bending of the nanoplate under the action of a constant and sinusoidal distributed transverse loads are presented for different values of the nonlocal nanoscale length scale parameter. An analysis of deviations of the constructed solution using Chebyshev polynomials from the analytical solution of the problem is carried out in the infinite norm. The influence of the nanoscale parameter on the bending of nanoplate and bending moments is studied.
- Open Access
- 31 March 2024
- Published by National Research Mordovia State University MRSU in Zhurnal Srednevolzhskogo Matematicheskogo Obshchestva
- Vol. 26 (1)
Mathematical Modeling of Elastically Deformed States of Thin Isotropic Plates Using Chebyshev Polynomials
- 31 March 2024
- Published by National Research Mordovia State University MRSU in Zhurnal Srednevolzhskogo Matematicheskogo Obshchestva
- Vol. 26 (1)
Open AccessMathematical Modeling of Elastically Deformed States of Thin Isotropic Plates Using Chebyshev Polynomials
- 1 January 2024
- Published by Irkutsk State University in The Bulletin of Irkutsk State University. Series Mathematics
- Vol. 50, 19-35
On the Collocation Method in Constructing a Solution to the Volterra Integral Equation of the Second Kind Using Chebyshev and Legendre Polynomials
The paper proposes a matrix implementation of the collocation method for constructing a solution to Volterra integral equations of the second kind using systems of orthogonal Chebyshev polynomials of the first kind and Legendre polynomials. The integrand in the equations considered in this work is represented as a partial sum of a series for these polynomials. The roots of the Chebyshev and Legendre polynomials are chosen as collocation points. Using matrix and integral transformations, properties of finite sums of products of these polynomials and weight functions at the zeros of the corresponding polynomials with degree equal to the number of nodes, integral equations are reduced to systems of linear algebraic equations for unknown values of the sought functions at these points. As a result, solutions to Volterra integral equations of the second kind are found by polynomial interpolations of the obtained function values at collocation points using inverse matrices, the elements of which are written on the basis of orthogonal relations for these polynomials. In the presented work, the elements of integral matrices are also given in explicit form. Error estimates for the constructed solutions with respect to the infinite norm are obtained. The results of computational experiments are presented, which demonstrate the effectiveness of the collocation method used.
- 1 January 2024
- Published by Irkutsk State University in The Bulletin of Irkutsk State University. Series Mathematics
- Vol. 50, 19-35
On the Collocation Method in Constructing a Solution to the Volterra Integral Equation of the Second Kind Using Chebyshev and Legendre Polynomials
The paper proposes a matrix implementation of the collocation method for constructing a solution to Volterra integral equations of the second kind using systems of orthogonal Chebyshev polynomials of the first kind and Legendre polynomials. The integrand in the equations considered in this work is represented as a partial sum of a series for these polynomials. The roots of the Chebyshev and Legendre polynomials are chosen as collocation points. Using matrix and integral transformations, properties of finite sums of products of these polynomials and weight functions at the zeros of the corresponding polynomials with degree equal to the number of nodes, integral equations are reduced to systems of linear algebraic equations for unknown values of the sought functions at these points. As a result, solutions to Volterra integral equations of the second kind are found by polynomial interpolations of the obtained function values at collocation points using inverse matrices, the elements of which are written on the basis of orthogonal relations for these polynomials. In the presented work, the elements of integral matrices are also given in explicit form. Error estimates for the constructed solutions with respect to the infinite norm are obtained. The results of computational experiments are presented, which demonstrate the effectiveness of the collocation method used.
- 1 January 2024
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. Applied Mathematics. Computer Science. Control Processes
- Vol. 20 (3) , 310-323
Mathematical modeling of bending of a thin orthotropic plate clamped along the contour
Within the framework of Kirchhoff’s theory, a new approach to constructing a solution to the problem of modeling the bending of a thin rectangular orthotropic plate clamped along the contour, which is under the influence of a load normally distributed over its surface, is proposed. the solution to the inhomogeneous biharmonic equation for an orthotropic plate is obtained in the form of a partial sum of a double series in Chebyshev polynomials of the first kind. To find the coefficients in this expansion, the boundary value problem is reduced by the collocation method to a system of linear algebraic equations in matrix form using the properties of these polynomials. Based on matrix and differential transformations, expressions for bending moments and shearing forces are obtained. the results of calculations of the bending of the middle surface of the plate under different loads on the plate are presented, which demonstrate the effectiveness of the proposed approach.
- 1 January 2024
- Published by Saint Petersburg State University in Vestnik of Saint Petersburg University. Applied Mathematics. Computer Science. Control Processes
- Vol. 20 (3) , 310-323
Mathematical modeling of bending of a thin orthotropic plate clamped along the contour
Within the framework of Kirchhoff’s theory, a new approach to constructing a solution to the problem of modeling the bending of a thin rectangular orthotropic plate clamped along the contour, which is under the influence of a load normally distributed over its surface, is proposed. the solution to the inhomogeneous biharmonic equation for an orthotropic plate is obtained in the form of a partial sum of a double series in Chebyshev polynomials of the first kind. To find the coefficients in this expansion, the boundary value problem is reduced by the collocation method to a system of linear algebraic equations in matrix form using the properties of these polynomials. Based on matrix and differential transformations, expressions for bending moments and shearing forces are obtained. the results of calculations of the bending of the middle surface of the plate under different loads on the plate are presented, which demonstrate the effectiveness of the proposed approach.
- Open Access
- 1 January 2024
- Published by Tomsk State University in Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika
- No. 88,p. 14-25
About the integral approach using the collocation method
The article describes a matrix method of polynomial Chebyshev approximation using an integral approach to construct a solution to a nonhomogeneous fourth-order differential equation with mixed boundary conditions of the first kind. The proposed method is based on the expansion of the fourth-order derivative of the desired function into a series in terms of Chebyshev polynomials of the first kind and the representation of the partial sum of this series as a product of matrices whose elements are, respectively, the Chebyshev polynomials and the coefficients in this expansion. In this paper, using analytical formulas for calculating integrals of Chebyshev polynomials, we obtain a representation of the desired function in terms of the product of the matrices defined above. The use of points of extrema and zeros of Chebyshev polynomials of the first kind as nodes, as well as the properties of the sums of products of Chebyshev polynomials at these points, made it possible to reduce the boundary value problem by the collocation method to a system of inhomogeneous linear algebraic equations with a sparse matrix of this system. It is shown that the solution constructed in this way satisfies the differential equation at all nodes, including the boundary ones, in contrast to the approximate solution obtained by approximating the exact solution in the form of a finite sum of the Chebyshev series. The effectiveness of the proposed method is demonstrated by considering a boundary value problem with a known analytical solution. The convergence analysis of the constructed solution is carried out.
- 1 January 2024
- Published by Tomsk State University in Vestnik Tomskogo Gosudarstvennogo Universiteta. Matematika i Mekhanika
- No. 88,p. 14-25
Open AccessAbout the integral approach using the collocation method
The article describes a matrix method of polynomial Chebyshev approximation using an integral approach to construct a solution to a nonhomogeneous fourth-order differential equation with mixed boundary conditions of the first kind. The proposed method is based on the expansion of the fourth-order derivative of the desired function into a series in terms of Chebyshev polynomials of the first kind and the representation of the partial sum of this series as a product of matrices whose elements are, respectively, the Chebyshev polynomials and the coefficients in this expansion. In this paper, using analytical formulas for calculating integrals of Chebyshev polynomials, we obtain a representation of the desired function in terms of the product of the matrices defined above. The use of points of extrema and zeros of Chebyshev polynomials of the first kind as nodes, as well as the properties of the sums of products of Chebyshev polynomials at these points, made it possible to reduce the boundary value problem by the collocation method to a system of inhomogeneous linear algebraic equations with a sparse matrix of this system. It is shown that the solution constructed in this way satisfies the differential equation at all nodes, including the boundary ones, in contrast to the approximate solution obtained by approximating the exact solution in the form of a finite sum of the Chebyshev series. The effectiveness of the proposed method is demonstrated by considering a boundary value problem with a known analytical solution. The convergence analysis of the constructed solution is carried out.
- 1 August 2023
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 64 (4) , 647-655
DARCY FRICTION COEFFICIENT CALCULATED USING AN ELLIPSOIDAL STATISTICAL MODEL
This study describes a method for calculating the Darcy friction coefficient in a flat channel formed by two infinite parallel plates as a function of the Reynolds numbers and the gas rarefaction parameter in the channel. Maxwell’s diffuse reflection model is used as a model for the reflection of gas molecules from the channel walls. The isothermal gas flow is due to the presence of a pressure gradient that is small in absolute magnitude and directed along the channel walls. The method proposed in this paper is based on solving a linearized ellipsoidal-statistical Boltzmann kinetic equation with homogeneous boundary conditions using the Chebyshev polynomial approximation. An unknown function that interpolates the solution to this equation is represented as a partial sum of a series in Chebyshev polynomials of the first kind. The properties of finite sums for an orthonormal system of Chebyshev polynomials are used to reduce the problem to a system of linear algebraic equations with respect to the values of the sought function at interpolation nodes. The results obtained in this study are analyzed.
- 1 August 2023
- Published by Pleiades Publishing Ltd in Journal of Applied Mechanics and Technical Physics
- Vol. 64 (4) , 647-655
DARCY FRICTION COEFFICIENT CALCULATED USING AN ELLIPSOIDAL STATISTICAL MODEL
This study describes a method for calculating the Darcy friction coefficient in a flat channel formed by two infinite parallel plates as a function of the Reynolds numbers and the gas rarefaction parameter in the channel. Maxwell’s diffuse reflection model is used as a model for the reflection of gas molecules from the channel walls. The isothermal gas flow is due to the presence of a pressure gradient that is small in absolute magnitude and directed along the channel walls. The method proposed in this paper is based on solving a linearized ellipsoidal-statistical Boltzmann kinetic equation with homogeneous boundary conditions using the Chebyshev polynomial approximation. An unknown function that interpolates the solution to this equation is represented as a partial sum of a series in Chebyshev polynomials of the first kind. The properties of finite sums for an orthonormal system of Chebyshev polynomials are used to reduce the problem to a system of linear algebraic equations with respect to the values of the sought function at interpolation nodes. The results obtained in this study are analyzed.