Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Chinenye E. Azuka has a total of 12 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effects of Malting and Extrusion on the Functional and Physical Properties of Extrudates from Malted Brown Rice and Pigeon Pea Flour Blends

    by Chinenye Azuka, Amarachi Onwuchekwa, Adaora Nwosu, Mel Holmes, Christine Boesch, Gabriel Okafor

    Malted grains subjected to extrusion technology could have better quality indices than non-malted grains. The effects of malting and extrusion on the functional and physical qualities of foods extruded from malted brown rice and pigeon pea flour blends were investigated. Malted pigeon pea and brown rice flours were processed into blends, extruded under various conditions of feed moisture levels (15–20), feed compositions (8–30%), and barrel temperatures (100–130 °C), and analyzed using Response Surface Methodology with a Box–Behnken design. The impacts of malting and extrusion were assessed on the following functional qualities: bulk density, rheology, swelling capacity, water absorption capacity, and solubility. The physical quality assessment included a 2-D photographic representation of the extrudates, a microscopic assessment of their internal structure, expansion index, color parameters (L*, a*, b*), and alterations in the color index. Increased feed moisture, malted pigeon pea, and decreased barrel temperature resulted in a higher bulk density (0.72 to 0.84 g/cm3) of the extrudates. There was a decrease in water absorption capacity (6.82–4.49%) with an increase in barrel temperature above 100 °C. All the samples showed a decrease in viscosity with increasing shear rate. At low barrel temperatures, feed compositions, and feed moistures, extrusion led to increases in the expansion index (3.5 to 12.94) and the color lightness (66.83–81.71) of the extrudates. Samples with a higher proportion of malted brown rice showed a higher expansion index, lower bulk density, and lighter color of the extrudates.


  • Open Access

    Characterization and End-Use Qualities of Rice Varieties in Kogi State, Nigeria

    by C. E. Azuka, A. N. Nwosu, F. U. Asoiro, K. O. Omeje

    Background and Objective: Oryza glaberrima (Oje-igbale) and Oryza sativa L. Oryza glaberrima hybrid (Adede-agidi) are two rice varieties cultivated in Ibaji LGA of Kogi State, Nigeria and each of them is used for only a singular purpose. Studies were carried out to find out the characteristics of these grains and further processes they could be subjected to contribute to the strive for food security. Materials and Methods: Three samples of each, of the two different rice varieties’ paddy, were procured, cleaned, 2 kg portion parboiled, milled and thereafter analyzed for their physical and cooking, attributes. Un-parboiled paddy (500 g) of the two rice varieties were de-husked, milled into flour and samples were used to determine their physicochemical properties. Results: For the physicochemical properties, the starch content of Oje-igbales was of hard gel consistency (29.32-38.11 mm) and intermediate-amylose content (20.78-24.68 %) depicting it will be a good variety for a long time and high-temperature treatment processes. The starch content of the Adede-agidis’ was of soft gel consistency (66.43-72.52 mm), low-and intermediate-amylose content (18.47-20.23%) depicting it will be suitable for breakfast cereals, fermented rice cakes and baby foods. Conclusion: This research provides knowledge on the characteristics and other end-use qualities of Oje-igbale and Adede-agidi for value addition. APA-7 Style Azuka, C.E., Nwosu, A.N., Asoiro, F.U., Omeje, K.O. (2022). Characterization and End-Use Qualities of Rice Varieties in Kogi State, Nigeria. Trends in Agricultural Sciences, 1(1), 10-18. https://doi.org/10.17311/tas.2022.10.18 ACS Style Azuka, C.E.; Nwosu, A.N.; Asoiro, F.U.; Omeje, K.O. Characterization and End-Use Qualities of Rice Varieties in Kogi State, Nigeria. Trends Agric. Sci 2022, 1, 10-18. https://doi.org/10.17311/tas.2022.10.18 AMA Style Azuka CE, Nwosu AN, Asoiro FU, Omeje KO. Characterization and End-Use Qualities of Rice Varieties in Kogi State, Nigeria. Trends in Agricultural Sciences. 2022; 1(1): 10-18. https://doi.org/10.17311/tas.2022.10.18 Chicago/Turabian Style Azuka, C., E., A. N. Nwosu, F. U. Asoiro, and K. O. Omeje. 2022. "Characterization and End-Use Qualities of Rice Varieties in Kogi State, Nigeria" Trends in Agricultural Sciences 1, no. 1: 10-18. https://doi.org/10.17311/tas.2022.10.18

  • Proximate and Physicochemical Quality of Jelly Produced from Blends of Beetroot and Pineapple Juice

    by Adaora N. Nwosu, Chinenye E. Azuka, Chinedu E. Kalu

    Fruit Jelly was produced from beetroot and pineapple fruits as a value-added product for addressing their gluts during its peak season. The fruits were cleaned and their juices were blended using the following beetroot: pineapple ratio; 50:50, 60:40, 70:30, 80:20, and 90:10. The fruit juice blends were then labeled I, R, O, H, and A, respectively, while the commercial jelly sample K, and beetroot jelly were used only as control. Proximate composition showed that the fruit jellies had a higher nutritional profile than the commercial jelly. The result revealed variation in moisture content (35.11 to 36.17%), Ash content (0.12 to 0.26 %), Carbohydrate content (61.22% to 63.74%), Energy value (257.26 KJ to 262.72 KJ) and protein content (0.88 to 1.77 %). The energy value (262.72 KJ) and carbohydrate content (63.74 %) of the commercial jelly were however significantly (p < 0.05) higher than in the beetroot - pineapple fruits jelly. The protein content of the jelly ranged from 1.52 to 1.76 %. Overall, increasing the blending ratio increased the fat, ash, protein, and moisture contents of the jellies. Besides, the jellies with the least amount of beetroot I (50 % beetroot and 50 % pineapple juice) had the highest carbohydrate content (62.69 %) thus providing the highest amount of energy 261.30 KJ. Physicochemical properties showed the following ranges total soluble solid content 63.84 to 64.89 °Brix, total sugar 43.23 to 43.94 %, reducing sugar 28.30 to 28.77 %, and non-reducing sugar 14.94 to 15.18 %. Titratable acidity and pH showed that an inverse relationship existed between them. The beetroot and pineapple jelly blends produced compared favourably with proximate composition and physicochemical properties of commercial jelly.


  • Quality evaluation of egg-free cake from soft tofu

    by A. N. Nwosu, C. E. Azuka, C. U. Onyia-Akaa

    Soft tofu was used to produce a cake to ascertain its suitability in producing egg-free cake (EFC) for vegans and individuals allergic to eggs. A conventional cake (CVC) served as control and the quality characteristics of the EFC and CVC were evaluated. Results showed the egg-free cake had physical properties which were significantly (p < 0.05) higher in weight (1611 g), density (0.81 kg/m3) and specific volume (1.23%) than Conventional cake (1516 g, 0.61 kg/m3 and 0.25%, respectively). CVC showed significantly p < 0.05 higher height (8.50 cm) and volume (2644.78 m3) which is desirable in the baked cake. EFC showed significantly p < 0.05 higher values in ash (3.13%), moisture (24.01%), fibre (2.40%) and carbohydrate (52.34%), while CVC had significant (p < 0.05) higher values in protein (7.38%) and fat (16.34%). The taste (0.55), colour (0.55), texture (0.55) and aroma (0.55) of EFC was more preferred than CVC (0.45, 0.40, 0.45 and 0.45, respectively). Soft tofu showed suitability and an acceptable replacement for egg in making Egg-free cakes for vegetarians and individuals allergic to egg.


  • Physical properties of parboiled milled local rice varieties marketed in South-East Nigeria

    by C. E. Azuka, I. Nkama, F. U. Asoiro

    Physical properties of rice grain is important for mechanisation and proper post-harvest handling operations to prevent post-harvest loss and achieve high head-rice grains. Knowledge on the physical properties of Nigeria’s local rice is limited which has led to losses and production of low quality grains characterised by large amount of brokens and poor appearance. Physical properties of 18 local and 3 imported rice varieties (control), were evaluated using standard methods. The physical properties evaluated were grain dimensions, Arithmetic mean diameter, (AMD) geometric mean diameter (GMD), square mean diameter (SMD), sphericity, aspect ratio, surface area, general appearance, dockage and aroma. Most (77.78%) of the local rice varieties were long grain rice, 50% were slender grains and 50% were bold grains, 77.78% of the local rice varieties were heavy grains. The AMD, GMD and SMD of local rice grains ranged from 3.29–3.86 mm, 8.02–10.36 mm and 4.75–5.82 mm, respectively. The sphericity, aspect ratio and surface area were in the range of 51.25–59.23%, 0.31–0.46 and 21.87–29.44 mm2, respectively. A significant percentage (50%) of the local rice were grey coloured and unappealing in appearance. All the local rice varieties had dockage (5–70%) while the imported rice varieties had no dockage and possessed translucent light-cream to yellow shades and were appealing in appearance. These data are important for correct coupling and adjustment of post-harvest processing machine to prevent losses and produce high head-rice with appealing appearance.