Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Van Thang Nguyen has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Inhibitory Technology for Preventing the Formation of Asphaltene–Resin–Paraffin and Gas Hydrate Deposits in Oil Wells

    by Andrey A. Vorontsov, Mikhail K. Rogachev, Grigoriy Yu. Korobov, Dmitriy V. Parfenov, Thang V. Nguyen, Maxim N. Limanov

    The formation of asphalt–resin–paraffin deposits (ARPDs) and gas hydrate deposits (GHDs) in oil wells equipped with electric submersible pumps (ESPs) remains a significant challenge in the oil and gas industry. This study aims to develop an inhibitory technology to prevent these deposits by utilizing the synergistic effect of chemical reagents combined with the optimization of ESP operating parameters. Based on previously published mathematical modeling and laboratory studies by the authors, this work presents the technological implementation of the inhibition system and its economic assessment. Specifically, optimal reagent dosages were calculated considering their synergistic interactions, a periodic injection regime was established, and the impact on the well’s mean time between failures (MTBF) was evaluated. Results demonstrate that optimizing ESP parameters shifts the onset depth of GHD formation by 119.4 m (25%) and ARPD formation by 72.6 m (6%). The application of the selected ARPD inhibitor at 0.055 wt.% reduced the thermodynamic hydrate inhibitor (methanol) dosage by 12.17% and enabled a transition from continuous to periodic methanol injection. Consequently, the predicted MTBF increased from 277 to 419 days (+50%). An eight-year economic analysis showed a positive net present value with a payback period of 14 months. Thus, the proposed technology is recommended for field testing in high-paraffin, low-resin oil fields operating under permafrost conditions.

  • Stress environment and roof support needs for roadways ahead of the coal face: Case study from Ha Lam coal mine

    by L.Q. Phuc, N.K. Linh, N.V. Babyr, N.V. Thang

    Underground coal mining is characterized by confined working conditions and significant occupational safety hazards. Specifically, development headings driven along the coal seam ahead of the longwall face present a high risk of roof falls and challenging roof control conditions. The aim of this study is to analyse the stress distribution and the development of plastic failure zones in the surrounding rock mass, based on the mining conditions of Seam No. 10 at the Ha Lam coal mine. The relevance of the work is driven by the critical need to ensure the stability of development headings under the abutment pressure influence of the advancing longwall face, in order to enhance both safety and extraction efficiency. The main method employed involves numerical modelling of the rock mass stress-strain state, validated with in-situ monitoring data. As a result, it was established that the roadway ahead of the longwall face is consistently subjected to an asymmetric stress regime, with the horizontal-to-vertical stress ratio exceeding 2.5. The plastic zone in the surrounding rock develops asymmetrically between the two ribs of the roadway, leading to an unbalanced load. The magnitude of the stress and the extent of the plastic deformation zone around the ventilation roadway are significantly greater than those around the haulage roadway. Consequently, a supplemental support strategy is required to enhance roadway stability as it approaches the longwall face during mining operations. This paper provides a reliable foundation for the Ha Lam mine and other underground coal mines in Vietnam in developing plans to ensure roadway stability, improve production efficiency, and enhance occupational safety Подземная добыча угля связана с ограниченными условиями работы и значительными рисками безопасности труда. В частности, горные выработки, проводимые по угольному пласту впереди очистного забоя, представляют собой зону повышенного риска обрушения кровли и сложностей с управлением кровлей. Целью данного исследования является анализ распределения напряжений и развития зон пластической деформации во вмещающих породах на основе условий отработки пласта № 10 шахты «Ха Лам». Актуальность работы обусловлена необходимостью обеспечения устойчивости подготовительных выработок в зоне опережающего влияния очистных работ для повышения безопасности и эффективности добычи. В качестве основного метода использовано компьютерное моделирование напряженно-деформированного состояния породного массива, верифицированное данными натурных наблюдений. В результате установлено, что выработка, расположенная впереди очистного забоя, постоянно находится в условиях асимметричного напряженного состояния, при этом коэффициент соотношения горизонтального и вертикального напряжения достигает значений свыше 2,5. Зона пластических деформаций развивается асимметрично между двумя боками выработки, что приводит к неравномерной нагрузке. Величина напряжений и степень распространения зоны пластической деформации вокруг вентиляционной выработки значительно больше, чем у транспортной выработки. Следовательно, необходим план дополнительного крепления для повышения устойчивости выработки по мере ее приближения к очистному забою. Данная статья служит надежной основой для шахты «Ха Лам» и других подземных угольных шахт Вьетнама при разработке планов по обеспечению устойчивости горных выработок, повышению эффективности добычи и безопасности труда


  • Modeling Wall Deformation During the Construction of Metro Line 1 (Ho Chi Minh City) Using an Inferred Soil Modulus Derived from SPT Values

    by Luc Manh Bui, Li Wu, Yao Cheng, Chau Lan Nguyen, Tuan-Nghia Do, Van Thang Nguyen

    The objective of this study is to assess the deformation of retaining walls during excavations using 2D finite element analysis within the context of the Ho Chi Minh Metro project. The investigation focuses on Opera House station, which is located in a densely populated area near historical buildings and serves as the deepest underground station on Ho Chi Minh City's first metro line. Soil properties are determined based on data obtained from site surveys, in-situ tests, and laboratory experiments. The Hardening Soil Model is applied in numerical simulations to estimate soil stiffness modulus parameters, utilizing results from the Standard Penetration Test (SPT). The results of the 2D finite element analysis, coupled with on-site monitoring, demonstrate that employing the proposed correlation between soil stiffness modulus and SPT index yields accurate simulation results. These results can be valuable for predicting retaining wall displacements in similar excavation projects.

  • Open Access

    МЕХАНИЗМЫ ОБРАЗОВАНИЯ АСФАЛЬТОСМОЛОПАРАФИНОВЫХ ОТЛОЖЕНИЙ И ФАКТОРЫ ИНТЕНСИВНОСТИ ИХ ФОРМИРОВАНИЯ

    by Григорий Юрьевич Коробов, Дмитрий Викторович Парфенов, Ван Тханг Нгуен

    Ссылка для цитирования: Коробов Г.Ю., Парфенов Д.В., Нгуен Ван Тханг. Механизмы образования асфальтосмолопарафиновых отложений и факторы интенсивности их формирования // Известия Томского политехнического университета. Инжиниринг георесурсов. – 2023. – Т. 334. – № 4. – С.103-116. Актуальность работы обусловлена недостаточной изученностью процесса образования отложений парафина на внутренней поверхности нефтепромыслового оборудования. Исследовательский опыт показал противоречивые результаты, что указывает на отсутствие общепринятой теории, описывающей процесс образования парафиновых отложений и влияние различных факторов на интенсивность их формирования. При этом свойства отложений парафина существенно зависят от условий протекания процесса их образования. Соответственно, более точное понимание принципов формирования отложений позволяет прогнозировать их рост и подбирать эффективные способы борьбы с данным осложнением. Цель: рассмотреть основные механизмы образования отложений парафина, а также провести анализ результатов предшествующих работ, посвященных исследованию факторов интенсивности их формирования. Объекты: процесс образования парафиновых отложений на внутренней поверхности нефтепромыслового оборудования и факторы интенсивности их формирования. Методы: выполнение литературного обзора и проработка публикаций в рецензируемых изданиях; анализ, сопоставление результатов предшествующих исследований. Результаты. Описаны основные механизмы образования отложений парафина на внутренней поверхности нефтепромыслового оборудования, такие как: молекулярная диффузия, сдвиговое воздействие, гравитационное осаждение, броуновское движение и термодиффузия. Представлен обзор предшествующих исследований, посвященных оценке вклада указанных механизмов в процесс образования отложений парафина и изучению влияния факторов интенсивности их формирования, таких как: обводненность продукции, режим и скорость потока, газосодержание, компонентный состав нефти и свойства материалов, из которых изготовлено оборудование. Проведенный анализ позволил выявить противоречивые результаты и зависимости, что подтверждает необходимость дальнейшего изучения принципов образования парафиновых отложений на внутренней поверхности нефтепромыслового оборудования.


  • Open Access

    A comprehensive method for determining the dewaxing interval period in gas lift wells

    by Van Thang Nguyen, Thanh Vinh Pham, Mikhail Konstantinovich Rogachev, Grigory Yurievich Korobov, Dmitry Viktorovich Parfenov, Aleksei Olegovich Zhurkevich, Shamil Rasikhovich Islamov

    The gas lift method is an artificial lift method of well production using the energy of compressed gas injected into the well to lift the reservoir fluid to the surface. The formation of paraffin deposits has remained one of the critical oil production problems due to the growing percentage of hard-to-recover reserves in the overall structure. This complication is also typical for many oil and gas fields in Vietnam, such as the White Tiger, White Bear, and Dragon fields. Wax deposit formation negatively affects the operation of individual production wells and the development of the field as a whole, which leads to a decrease in productivity and the need to take measures to remove paraffin deposits, subsequently increasing the downtime period of the well. In order to ensure stable production of highly paraffinic oil, it is necessary to take measures to dewax wells systematically. The frequency of wax removal operations depends on the intensity of the wax formation, which is determined by various technological, technical, and geological factors. The interval between dewaxing operations is called the dewaxing interval period (DIP). This value is an important technological parameter and characterizes the efficiency of a well’s operation. In this study, a comprehensive method has been developed to determine the dewaxing interval period (treatment interval) for gas-lift wells when the formation of wax deposits has occurred. The optimal dewaxing interval period is suggested to be determined by the change in the liquid well flow rate at the point when it falls by 20% from the initial value. In addition, a mathematical model of the time-dependent wax thickness, taking into account the heat and mass transfer laws and the laboratory results using the Cold Finger method, has also been developed. The proposed model for determining the dewaxing interval period was applied to an oil well in Vietnam. The DIP prediction model gave a similar value to the actual DIP field data (6.67 and 6 days, respectively). The obtained results showed that the model had proven its accuracy following the results of a comparison with the field's data of dewaxing operations.


  • Open Access

    Technology for Preventing the Wax Deposit Formation in Gas-Lift Wells at Offshore Oil and Gas Fields in Vietnam

    by Mikhail Konstantinovich Rogachev, Thang Nguyen Van, Aleksandr Nikolaevich Aleksandrov

    Within the past few decades, the production of high-wax oils at offshore fields in Vietnam has been fraught with severe problems due to the intense formation of asphalt-resin-paraffin deposits (ARPD) in the downhole oil and gas equipment. The formation of organic wax deposits in the tubing string led to a significant decrease in gas-lift wells production, efficiency of compressor units, transport capacity of the piping systems, along with an increase in equipment failure. Subsequently, the efficiency of gas-lift wells dramatically decreased to less than 40% as a whole. The existing methods and technologies for combating organic wax deposit formation in downhole equipment have many advantages. However, their use in producing high-wax anomalous oil does not entirely prevent the wax formation in the tubing string and leads to a significant reduction in oil production, transport capacity, and treatment intervals. The results of theoretical and experimental studies presented in this article demonstrate that a promising approach to improve the efficiency of gas-lift wells during the production of high-wax oil is to use the technology of periodic injection of hot associated petroleum gas (APG) into the annulus of an oil-producing well. The effectiveness of the proposed method of combating wax formation in gas-lift wells highly depends on the combination of a few factors: the determination of wax deposit formation intensity in the well and the implementation of a set of preparatory measures to determine the optimal injection mode of hot APG (flow rate and injection depth) into the annulus between tubing strings and technological pipes. The injection depth of the hot APG should not be less than the depth of wax formation in the tubing string. The optimal injection rate of hot APG is determined by analyzing and mathematically modeling the APG injection system based on well-known thermodynamic laws.


  • Open Access

    A new approach to improving efficiency of gas-lift wells in the conditions of the formation of organic wax deposits in the Dragon field

    by Van Thang Nguyen, Mikhail Konstantinovich Rogachev, Aleksandr Nikolaevich Aleksandrov

    Gas-lift is one of the artificial methods in which gas is injected down the production casing–tubing annulus and enters the production tubing through a number of gas-lift valves. During the production of a gas-lift well, the injected compressed gas might cause changes in pressure, temperature as well as fluid composition. When the temperature of the oil falls below the wax appearance temperature, it leads to the formation of organic wax deposits. Wax precipitation in well tubing and processing equipment might lead to dramatic reduction in production, equipment failures, loss of storage and transport capacity, and loss of efficiency. This paper presents a detailed study of wax formation in a gas-lift well. Taking into account changes in the oil component composition during gas injection, the depth of wax formation has been determined by applying a highly accurate developed algorithm. The optimal operating regime of the gas-lift well has been determined using a compositional multiphase model.


  • Simulation of organic solids formation process in high-wax formation oil

    by A.N. Aleksandrov, M.K. Rogachev, Thang Nguyen Van, M.а. Kishchenko, E.A. Kibirev

    The novelty of this paper is to provide a detailed study of the effect of oil blend composition on conditions and nature of wax deposition based on a developed formation oil model. In addition, this work also proposes a phase equilibrium diagram for given conditions, which play a pivotal role in predicting and measuring wax formation. The paper presents the results from the modeling of the formation of organic deposits, through the processes of simulation using the PIPE SIM software together with Multiflash Wax module. The work studies the effect of high-wax oil components on conditions and nature of wax solidification based on the developed formation oil model. Plotting of the phase diagram of the hydrocarbon system allowed us to determine the value of the wax appearance temperature (WAT), which was confirmed by laboratory studies. Changes in the molecular mass of organic deposits during wax crystallization were established.