Hojae Shim
Research Subjects
Hojae Shim has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
Zhiwei Liang
Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau, Taipa, Macau SAR, China
4 shared publicationsLan Qiu
Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau, Macau SAR, China
3 shared publicationsQihong Lu
Department of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou, China
3 shared publicationsHua Zhong
Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau, Macau SAR, People’s Republic of China
2 shared publicationsKeng Seng Lok
Department of Civil and Environmental Engineering, Faculty of Science and Technology, University of Macau, Macau SAR, People’s Republic of China
2 shared publications- Qihong Lu
School of Environmental Science and Engineering, Sun Yat-sen University, Guangzhou 510006, China
2 shared publications
Latest Publications
- 21 October 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 348, 119368
Biodiesel production and properties estimation from food waste and domestic wastewater by Rhodosporidium toruloides
- 21 October 2023
- Published by Elsevier in Journal of Environmental Management
- Vol. 348, 119368
Biodiesel production and properties estimation from food waste and domestic wastewater by Rhodosporidium toruloides
- 24 August 2023
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 460, 132387
Reutilization of scrap tyre for the enhanced removal of phthalate esters from water: immobilization performance, interaction mechanisms, and application
- 24 August 2023
- Published by Elsevier in Journal of Hazardous Materials
- Vol. 460, 132387
Reutilization of scrap tyre for the enhanced removal of phthalate esters from water: immobilization performance, interaction mechanisms, and application
- 10 July 2023
- Published by Elsevier in Chemosphere
- Vol. 338, 139462
Isolation and characterization of Rhodococcus sp. GG1 for metabolic degradation of chloroxylenol
- 10 July 2023
- Published by Elsevier in Chemosphere
- Vol. 338, 139462
Isolation and characterization of Rhodococcus sp. GG1 for metabolic degradation of chloroxylenol
- 4 May 2022
- Published by Taylor & Francis in Environmental Technology
- Vol. 44 (24) , 3698-3709
Zinc and copper supplements enhance trichloroethylene removal by Pseudomonas plecoglossicida in water
The effects of two microelements, zinc and copper, on the aerobic co-metabolic removal of trichloroethylene (10 mg/L) by the isolate Pseudomonas plecoglossicida were investigated. The strain was previously isolated from a petroleum-contaminated site using toluene (150 mg/L) as substrate. Different concentrations (1, 10 and 100 mg/L) of microelements provided with SO42− and Cl− were tested. The results showed the supplement of Zn2+ and Cu2+ at the low concentration (1 mg/L) significantly enhanced cell growth. The removal efficiencies for toluene and trichloroethylene were also enhanced at the low concentration (1 mg/L) of Zn2+ and Cu2+. Compared to the control without zinc supplement, higher concentrations of zinc (10 and 100 mg/L) enhanced the removal efficiencies for both toluene and trichloroethylene in the first three days but showed some inhibitory effect afterward. However, the higher concentrations of Cu2+ (10 and 100 mg/L) always showed inhibitory to the toluene removal while showing inhibitory to the TCE removal after three days. For both Zn2+ and Cu2+, the anions SO42− and Cl− did not show significant difference in their effects on the toluene removal. A possible mechanism for Zn2+ and Cu2+ to enhance the removal of toluene and trichloroethylene would be their involvement in toluene oxygenase-based transformation processes. In addition, high concentrations of Zn2+ and Cu2+ ions could be removed from the liquid by the cells accordingly. The results imply a potential of supplementing low concentrations of zinc and copper to enhance bioremediation of the sites co-contaminated with toluene and trichloroethylene. GRAPHICAL ABSTRACT
- 4 May 2022
- Published by Taylor & Francis in Environmental Technology
- Vol. 44 (24) , 3698-3709
Zinc and copper supplements enhance trichloroethylene removal by Pseudomonas plecoglossicida in water
The effects of two microelements, zinc and copper, on the aerobic co-metabolic removal of trichloroethylene (10 mg/L) by the isolate Pseudomonas plecoglossicida were investigated. The strain was previously isolated from a petroleum-contaminated site using toluene (150 mg/L) as substrate. Different concentrations (1, 10 and 100 mg/L) of microelements provided with SO42− and Cl− were tested. The results showed the supplement of Zn2+ and Cu2+ at the low concentration (1 mg/L) significantly enhanced cell growth. The removal efficiencies for toluene and trichloroethylene were also enhanced at the low concentration (1 mg/L) of Zn2+ and Cu2+. Compared to the control without zinc supplement, higher concentrations of zinc (10 and 100 mg/L) enhanced the removal efficiencies for both toluene and trichloroethylene in the first three days but showed some inhibitory effect afterward. However, the higher concentrations of Cu2+ (10 and 100 mg/L) always showed inhibitory to the toluene removal while showing inhibitory to the TCE removal after three days. For both Zn2+ and Cu2+, the anions SO42− and Cl− did not show significant difference in their effects on the toluene removal. A possible mechanism for Zn2+ and Cu2+ to enhance the removal of toluene and trichloroethylene would be their involvement in toluene oxygenase-based transformation processes. In addition, high concentrations of Zn2+ and Cu2+ ions could be removed from the liquid by the cells accordingly. The results imply a potential of supplementing low concentrations of zinc and copper to enhance bioremediation of the sites co-contaminated with toluene and trichloroethylene. GRAPHICAL ABSTRACT
- 7 January 2021
- Published by Springer Nature in Ecotoxicology
- Vol. 30 (7) , 1446-1453
Coupling of biostimulation and bioaugmentation for enhanced bioremoval of chloroethylenes and BTEX from clayey soil
The bioremoval potential of Pseudomonas plecoglossicida toward mixed contaminants was explored through the coupled biostimulation and bioaugmentation in soil microcosm. Response surface methodology was employed to optimize nutrients and innoculum size for the cometabolic removal of two representative chloroethylenes, trichloroethylene (TCE) and cis-1,2-dichloroethylene (cis-DCE), mixed with benzene, toluene, ethylbenzene, and xylenes (BTEX). The interactive effects of nutrients [nitrogen (N) and phosphorus (P)] and inoculum size toward the bioremoval of mixture of BTEX (600 mg kg−1), cis-DCE (10 mg kg−1), and TCE (10 mg kg−1) were estimated using principal component analysis and two-dimensional hierarchical cluster analysis. The optimal condition was confirmed with C:N:P ratio of 100:26.7:1.8–4.8 and higher inoculum size (≥25%), where 97.7% of benzene, 98.3% of toluene, 91.2% of ethylbenzene, 45.6% of m,p-xylene, 31.2% of o-xylene, 26.9% of cis-DCE, and 33.5% of TCE were bioremoved.
- 7 January 2021
- Published by Springer Nature in Ecotoxicology
- Vol. 30 (7) , 1446-1453
Coupling of biostimulation and bioaugmentation for enhanced bioremoval of chloroethylenes and BTEX from clayey soil
The bioremoval potential of Pseudomonas plecoglossicida toward mixed contaminants was explored through the coupled biostimulation and bioaugmentation in soil microcosm. Response surface methodology was employed to optimize nutrients and innoculum size for the cometabolic removal of two representative chloroethylenes, trichloroethylene (TCE) and cis-1,2-dichloroethylene (cis-DCE), mixed with benzene, toluene, ethylbenzene, and xylenes (BTEX). The interactive effects of nutrients [nitrogen (N) and phosphorus (P)] and inoculum size toward the bioremoval of mixture of BTEX (600 mg kg−1), cis-DCE (10 mg kg−1), and TCE (10 mg kg−1) were estimated using principal component analysis and two-dimensional hierarchical cluster analysis. The optimal condition was confirmed with C:N:P ratio of 100:26.7:1.8–4.8 and higher inoculum size (≥25%), where 97.7% of benzene, 98.3% of toluene, 91.2% of ethylbenzene, 45.6% of m,p-xylene, 31.2% of o-xylene, 26.9% of cis-DCE, and 33.5% of TCE were bioremoved.
- 14 August 2020
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 40 (2)
Bench‐scale fermentation for second generation ethanol and hydrogen production by Clostridium thermocellum DSMZ 1313 from sugarcane bagasse
Exploration of eco‐friendly energy resources substituting conventional fossil fuels is the real challenge globally. Prospectively, current investigation accentuates the fermentative conversion of low‐cost lignocellulosic biomass waste, sugarcane bagasse (SCB) into bioethanol and biohydrogen exploiting thermophilic cellulolytic bacterium Clostridium thermocellum DSMZ 1313. Initially, the optimization of some key fermentation factors for bioethanol and biohydrogen productions was done in 150 ml serum bottles employing Taguchi orthogonal array L27 (3̂13) experimental design. Results elucidated that the most suitable factors for ethanologenesis were 70 g/L cellulose, 10 g/L corn‐steep liquor (CSL), 15 mg/L ferrous sulfate (FeSO4·6H2O), 1 g/L magnesium chloride (MgCl2·6H2O), pH 7, and 5 days incubation whereas for hydrogen fermentation were 60 g/L cellulose, 30 g/L CSL, 5 mg/L FeSO4·6H2O, 2 g/L MgCl2·6H2O, pH 7, and 3 days incubation. Quantitatively, 7.422 g/L ethanol and 56.891/50 ml hydrogen were produced from cellulose while 6.352 g/L ethanol and 51.685/50 ml hydrogen with H2SO4‐pretreated SCB (substituted with cellulose). Scaled‐up suspended‐cell fermentations in bench‐scale stirred‐tank bioreactor resulted in 11.77% increased ethanol yield (0.239 g ethanol/g of glucose) and twofold higher hydrogen volumes (106.88 ml hydrogen/g of glucose). The employment of SCB directly as substrate for biofuels production has appeared sustainable to meet the high global energy demands.
- 14 August 2020
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 40 (2)
Bench‐scale fermentation for second generation ethanol and hydrogen production by Clostridium thermocellum DSMZ 1313 from sugarcane bagasse
Exploration of eco‐friendly energy resources substituting conventional fossil fuels is the real challenge globally. Prospectively, current investigation accentuates the fermentative conversion of low‐cost lignocellulosic biomass waste, sugarcane bagasse (SCB) into bioethanol and biohydrogen exploiting thermophilic cellulolytic bacterium Clostridium thermocellum DSMZ 1313. Initially, the optimization of some key fermentation factors for bioethanol and biohydrogen productions was done in 150 ml serum bottles employing Taguchi orthogonal array L27 (3̂13) experimental design. Results elucidated that the most suitable factors for ethanologenesis were 70 g/L cellulose, 10 g/L corn‐steep liquor (CSL), 15 mg/L ferrous sulfate (FeSO4·6H2O), 1 g/L magnesium chloride (MgCl2·6H2O), pH 7, and 5 days incubation whereas for hydrogen fermentation were 60 g/L cellulose, 30 g/L CSL, 5 mg/L FeSO4·6H2O, 2 g/L MgCl2·6H2O, pH 7, and 3 days incubation. Quantitatively, 7.422 g/L ethanol and 56.891/50 ml hydrogen were produced from cellulose while 6.352 g/L ethanol and 51.685/50 ml hydrogen with H2SO4‐pretreated SCB (substituted with cellulose). Scaled‐up suspended‐cell fermentations in bench‐scale stirred‐tank bioreactor resulted in 11.77% increased ethanol yield (0.239 g ethanol/g of glucose) and twofold higher hydrogen volumes (106.88 ml hydrogen/g of glucose). The employment of SCB directly as substrate for biofuels production has appeared sustainable to meet the high global energy demands.
- 13 August 2020
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 40 (8) , 1113-1130
Solid-phase denitrification for water remediation: processes, limitations, and new aspects
Nitrate pollution in water environments is a ubiquitous problem. Solid-phase denitrification (SPD) is a technology that has attracted in recent years increasing attention due to its significant advantage suitability over the aqueous-based denitrification for in situ water remediation. This paper provides a view of new aspects of the application of SPD for water remediation. The processes and mechanisms for nitrogen transformation in SPD, for example, direct denitrification, dissimilatory nitrate reduction to ammonium, and anammox are presented. The main processes of the transformation of the carbon substrate in SPD are also discussed. The major limitations of SPD, including low carbon availability, NO2 − and N2O accumulation, dissolved organic carbon release, and NH4 + production, are summarized and the factors associated with such limitations are also discussed. In addition, some novel measures to mitigate these limitations, such as applying a biodegradable polymer substrate and heterotrophic-autotrophic denitrification (HAD) process, are described. Finally, simultaneous removal of nitrate and some typical concurrent contaminants for expanded application of SPD are discussed. This review attempts to advance our understanding of engineered denitrification processes for wastewater treatment or water remediation.
- 13 August 2020
- Published by Taylor & Francis in Critical Reviews in Biotechnology
- Vol. 40 (8) , 1113-1130
Solid-phase denitrification for water remediation: processes, limitations, and new aspects
Nitrate pollution in water environments is a ubiquitous problem. Solid-phase denitrification (SPD) is a technology that has attracted in recent years increasing attention due to its significant advantage suitability over the aqueous-based denitrification for in situ water remediation. This paper provides a view of new aspects of the application of SPD for water remediation. The processes and mechanisms for nitrogen transformation in SPD, for example, direct denitrification, dissimilatory nitrate reduction to ammonium, and anammox are presented. The main processes of the transformation of the carbon substrate in SPD are also discussed. The major limitations of SPD, including low carbon availability, NO2 − and N2O accumulation, dissolved organic carbon release, and NH4 + production, are summarized and the factors associated with such limitations are also discussed. In addition, some novel measures to mitigate these limitations, such as applying a biodegradable polymer substrate and heterotrophic-autotrophic denitrification (HAD) process, are described. Finally, simultaneous removal of nitrate and some typical concurrent contaminants for expanded application of SPD are discussed. This review attempts to advance our understanding of engineered denitrification processes for wastewater treatment or water remediation.