JBJürgen Bläsing

Jürgen Bläsing

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jürgen Bläsing has a total of 58 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Optical study of the two-dimensional electron gas and the total electronic polarization discontinuity in Sc x Al1− x N/GaN heterostructures

    by Alwin Wüthrich, Jürgen Bläsing, André Strittmatter, Rajendra Kumar, Govardan Gopakumar, Michael J. Manfra, Oana Malis, Rüdiger Goldhahn, Martin Feneberg

    Wurtzite ScxAl1−xN/GaN heterostructures are predicted to exhibit large polarization discontinuities at the interface, leading to the formation of two-dimensional electron gases with high sheet carrier concentrations. However, the magnitude of these polarization discontinuities is currently under extensive discussion. To address this, three samples with Sc contents of 4%, 13%, and 18% are investigated, providing experimental insight into the evolution of the polarization discontinuity. Broad luminescence, originating from the En=2 level in the triangular quantum well at the heterostructure interface, is observed. By extracting the energetic position of the luminescence and combining the analysis with band structure simulations, experimental values for the polarization discontinuities of the ScAlN/GaN heterostructures are determined. For the samples containing 4%, 13%, and 18% Sc, the corresponding values are 0.113±0.009, 0.071±0.014, and (0.072±0.013)Cm−2, respectively. These findings agree with theoretical expectations, as lattice-matched ScAlN on GaN at ≈13 % Sc exhibits nearly zero piezoelectric polarization, whereas at 4% and 18% Sc, the piezoelectric polarization has opposite signs, reflecting the different strain states of the epilayer. The absorption edge energies for the samples are found to be 5.95, 5.87, and 5.78 eV for 4%, 13%, and 18% Sc, respectively.

  • Open Access

    Oxidation and irreversible structural distortion of ScN at elevated temperatures

    by Jona Grümbel, Jürgen Bläsing, Florian Hörich, Armin Dadgar, Rüdiger Goldhahn, Martin Feneberg

    We present optical and structural characterization of ScN exposed to high temperatures under air. Several sample pieces were heated up to 400–900 K while employing Raman spectroscopy for monitoring. After cooling back to room temperature, analysis by multiple characterization techniques, namely, Raman spectroscopy, spectroscopic ellipsometry, energy dispersive x-ray analysis (EDX), x-ray diffraction (XRD), and scanning-electron-microscopy (SEM) yields detailed insights into structural changes of ScN. Already at T=600K, irreversible changes are visible as witnessed, e.g., by Raman spectroscopy. Despite the observed changes of the ScN films’ properties, the crystal structure remains rock salt up to at least 700 K, which is further confirmed by SEM surface images and XRD. Oxidation and formation of oriented Sc2O3 grains as indicated by EDX, XRD, and SEM images occur between 800 and 900 K. Long time exposure to 900 K, finally, reveals a complete transformation of ScN to Sc2O3.


  • Open Access

    Blue shift of the absorption onset and bandgap bowing in rutile GexSn1−xO2

    by Elias Kluth, Yo Nagashima, Shohei Osawa, Yasushi Hirose, Jürgen Bläsing, André Strittmatter, Rüdiger Goldhahn, Martin Feneberg

    The ordinary dielectric functions (DFs) of rutile GexSn1−xO2 thin films grown by pulsed laser deposition have been obtained by spectroscopic ellipsometry from the near infrared to the ultraviolet range. Additionally, the Ge content x and the lattice parameters were determined by energy dispersive x-ray spectroscopy and x-ray diffraction, respectively. The lattice parameter deviates partly from Vegard's law due to epitaxial strain. In the DFs, a blue shift of the onset of absorption with increasing Ge content is observed. Evaluation of the DFs yields the characteristic transition energies at the absorption onset, and the corresponding bowing parameter of the dipole allowed direct bandgap of b=(0.70± 0.09) eV.


  • Open Access

    High resistive buffer layers by Fermi level engineering

    by Armin Dadgar, Ralf Borgmann, Jürgen Bläsing, André Strittmatter

    An efficient carrier compensation mechanism in semiconductor layers by Fermi-level engineering is demonstrated using the modulation-doping of a deep acceptor and a shallow donor. The punch-through of the depletion region across the whole stack of modulation-doped layers shifts the Fermi level closer toward the midgap position, resulting in the compensation of residual background free carriers. The method represents an alternative to achieve semi-insulating properties in semiconductor materials where a suitable deep acceptor or donor state at the midgap position is not available. We demonstrate the applicability of the concept with a commercially important GaN case study using carbon (deep acceptor) and Si (shallow donor) doping. A strong enhancement of breakdown field strength and reduced charge pileup effects are observed due to the efficient pinning of the Fermi level.


  • Impact of nanoscale fluctuations and cap-layer thickness in buried InGaN single quantum wells probed by tip-enhanced Raman scattering

    by M. Ries, E. Poliani, F. Nippert, D. Seidlitz, L. T. H. Greif, I. Koslow, J. Bläsing, M. Auf der Maur, A. Hoffmann, N. Esser, et al.

    Ternary semiconductors such as InGaN thin films, quantum wells, and superlattices commonly exhibit alloy fluctuations that become increasingly pronounced with higher In-content. The thickness fluctuations of quantum wells and their thin cap-layers further introduce nanoscale inhomogeneities that alter the potential landscape. In this work, we present a combined theoretical and experimental study of InGaN single quantum wells with thin GaN cap-layers to unravel the influence of cap-layer thickness, compositional inhomogeneity, and thickness fluctuations on their electronic and optical properties. A pronounced spectral shift of quantum well emission for thin cap-layers between 1 and 10 nm is observed by micro-photoluminescence spectroscopy. The origin of this shift is explained by calculations of electronic band profiles and probability density overlap of carriers in the quantum well. The impact of alloy fluctuations and homogeneity for different cap-layer thicknesses is studied on both the microscale and nanoscale using UV micro-Raman scattering and tip-enhanced Raman spectroscopy (TERS). On the microscale, the alloy composition as determined by micro-Raman mapping appears very homogeneous except for the thinnest 1 nm cap-layer where small fluctuations are visible. On the nanoscale, TERS reveals local fluctuations on a 20–30 nm length scale. The influence of the cap-layer thickness on the TERS spectra is discussed regarding both the nanoscale homogeneity and the depth resolution of the near-field Raman scattering technique. Our results demonstrate the capabilities of TERS to resolve nanoscale thickness fluctuations and compositional inhomogeneities in ultra-thin semiconductor layers, even when they are buried by thin cap-layers with thicknesses below 10 nm.


  • Open Access

    Laser-assisted local metal–organic vapor phase epitaxy

    by Max Trippel, Jürgen Bläsing, Matthias Wieneke, Armin Dadgar, Gordon Schmidt, Frank Bertram, Jürgen Christen, André Strittmatter

    Selective area epitaxial growth is an important technique, both for monolithic device integration as well as for defect reduction in heteroepitaxy of crystalline materials on foreign substrates. While surface engineering with masking materials or by surface structuring is an effective means for controlling the location of material growth, as well as for improving crystalline properties of epitaxial layers, the commonly involved integral substrate heating presents a limitation, e.g., due to constraints ofr the thermal budget applicable to existing device structures. As a solution, an epitaxial growth approach using a laser source only locally heating the selected growth area, in combination with metal–organic precursors to feed a pyrolithic chemical reaction (also known as metal–organic vapor phase epitaxy, MOVPE), is presented. Without masking or surface structuring, local epitaxial growth of III–V compound semiconductor layers on a 50–1500 µm length-scale, with high structural and optical quality, is demonstrated. We discuss general design rules for reactor chamber, laser heating, temperature measurement, sample manipulation, gas mixing, and distinguish laser-assisted local MOVPE from conventional planar growth for the important compound semiconductor GaAs. Surface de-oxidation prior to growth is mandatory to realize smooth island surfaces. Linear growth rates in the range 0.5–9 µm/h are demonstrated. With increasing island diameter, the probability for plastic deformation within the island increases, depending on reactor pressure. A step-flow mode on the island surface can be achieved by establishing a sufficiently small temperature gradient across the island.


  • Open Access

    Epitaxial growth of highly textured ZnO thin films on Si using an AlN buffer layer by atomic layer deposition

    by Maximilian Kolhep, Cheng Sun, Jürgen Bläsing, Björn Christian, Margit Zacharias

    Highly textured ZnO thin films were successfully grown on Si(111) by atomic layer deposition using an epitaxial AlN buffer layer at deposition temperatures between 100 and 300 °C. X-ray diffraction analysis proves an epitaxial relationship of ZnO[0001]//AlN[0001] and ZnO[112¯0]//AlN[112¯0]. Omega scans of the (0002) and (101¯0) reflections of ZnO demonstrate an improving crystalline quality for increasing deposition temperatures. An additional thermal postannealing step at 800 °C is found to be beneficial to further improve the crystal structure.


  • Growth of AlInN/GaN distributed Bragg reflectors with improved interface quality

    by C. Berger, A. Dadgar, J. Bläsing, A. Lesnik, P. Veit, G. Schmidt, T. Hempel, J. Christen, A. Krost, A. Strittmatter


  • Thin film growth of ZnO and its relation to substrate properties

    by S Lautenschlager, Charlotte G Neumann, S Graubner, J Sann, F Eylert, N Volbers, B K Meyer, Jurgen Blasing, Alois Krost, Frank Bertram, et al.

    We report on the hetero- and homoepitaxial growth of ZnO thin films by the chemical vapor deposition technique. We compare the results obtained on sapphire substrates, on GaN-templates on sapphire substrates and on silicon (111) substrates. Even under optimized growth conditions with the insertion of buffer layers the films tend to grow 3-dimensionally. However, also ZnO substrates, expected to be the best choice, need to be prepared before being used in the epitaxial growth. After mechanical polishing of the ZnO substrates we employed a high temperature annealing step which produced atomically flat surfaces and removed all of the surface and subsurface damage. Thereafter, the two dimensional epitaxial growth was achieved without an additional buffer layer. The substrate had a rocking curve full width at half maximum of 27" which can be compared with that of the film of 22". The films had superior band edge luminescence as compared to the substrate for which the green luminescence band was dominating.

  • Growth and Characterization of Homoepitaxial ZnO Thin Films Grown by CVD

    by Christian Neumann, Joachim Sann, Stefan Lautenschläger, Frank Bertram, Jürgen Christen, Jürgen Bläsing, Alois Krost, Bruno K. Meyer

    ZnO as a direct wide-band-semiconductor with its band gap of 3.3 eV at room temperature is a promising optoelectronic material. The main obstacle in the ZnO system is its lack of achieving reproducible p-type conductivity. The main reasons for this are the high residual intrinsic and extrinsic defect concentrations which are still not completely understood.Homoepitaxial growth of ZnO and thus minimization of intrinsic defects due to lattice mismatch and incorporation of residual substrate species could be a solution to overcome these problems. Despite the availability of ZnO bulk single crystals reports regarding ZnO homoepitaxy are still quite rare. In this paper we report on a successful homoepitaxial growth of ZnO thin films by chemical vapor deposition (CVD).Atomic force microscopy shows that two-dimensional epitaxial growth was achieved without any additional buffer layer. With a rocking curve full width at half maximum (FWHM) of 17 arcsec the deposited films show a superior crystalline quality compared to its substrate. The optical quality of the epitaxial films has been characterized laterally by cathodoluminescence and spectrally by photoluminescence. Excitonic emissions at 4K are as narrow as 110 μeV. A dependence of the appearance of excitonic emissions from the growth polarity can be shown which is attributed to different incorporation rates of extrinsic defects.