Anna Martin

For the valorization of oilseed press cakes into food products, extrusion can be used. A common way of applying the protein- and fiber-rich press cakes in directly expanded products is the combination thereof with starch, since starch gives a favourable texture, which correlates directly to expansion. To control product properties like expansion of protein and fiber-rich extruded products, the underlying physicochemical changes of proteins, fibers and starch due to thermomechanical input need to be comprehensively described. In this study, rapeseed press cake (RPC) was extruded and treated under defined thermomechanical conditions in a closed-cavity rheometer, pure and in combination with four starches. The impact of starch type (potato PS, waxy potato WPS, maize MS, high-amylose maize HAMS) and temperature (20/25, 80, 100, 120, 140 °C) on protein solubility, starch gelatinization (D_gel), starch hydrolysis (S_H) and fiber solubility of the blends was evaluated. The extrusion process conditions were significantly affected by the starch type. In the extruded blends, the starch type had a significant impact on the protein solubility which decreased with increasing barrel temperature. Increasing barrel temperatures significantly increased the amount of soluble fiber fractions in the blends. At defined thermomechanical conditions, the starch type showed no significant impact on the protein solubility of the blends. Therefore, the observed effects of starch type on the protein solubility of extruded blends could be attributed to the indistinct process conditions due to differences in the rheological properties of the starches rather than to molecular interactions of the starches with the rapeseed proteins in the blends.

Rapeseed press cake (RPC), an oil pressing side product rich in protein and fiber, can be combined with starch and valorized into directly expanded products using extrusion technology. The mechanism of starch expansion has been studied in detail, but the impact of RPC on expansion behavior is poorly understood. However, it can be linked to rheological and physicochemical properties and is a key product quality parameter. Blends with different amounts of RPC (0, 10, 40 g/100 g) were extruded at different barrel temperatures (100, 120, 140 °C) and moisture contents (24 or 29 g/100 g). The initial, intermediate and final sectional, longitudinal and volumetric expansion indices (SEI, LEI, VEI) were monitored directly, 10 s and 24 h after die exit to measure extrudate growth and shrinkage. The viscous and elastic properties of the extruded blends were investigated in a closed cavity rheometer. Starch and blends with 10 g/100 g RPC achieved a high initial SEI followed by significant short-term shrinkage. Blends containing 40 g/100 g RPC did not show any initial expansion. With increasing RPC content, the intermediate SEI decreased, but all samples reached a similar final SEI due to time-dependent swelling of the RPC blends. With increasing RPC content, the elasticity of the starch-based extruded samples significantly increased. Our study shows that comprehensive control and understanding of expansion mechanisms can be achieved only by investigating all stages of extrudate growth and shrinkage. We also found that the closed cavity rheometer is a powerful tool to correlate the rheological properties and expansion mechanisms of biopolymers.

In order to valorise food by-products into healthy and sustainable products, extrusion technology can be used. Thereby, a high expansion rate is often a targeted product property. Rapeseed press cake (RPC) is a protein- and fibre-rich side product of oil pressing. Although there is detailed knowledge about the expansion mechanism of starch, only a few studies describe the influence of press cake addition on the expansion and the physical quality of the extruded products. This study assessed the effect of RPC inclusion on the physical and technofunctional properties of starch-containing directly expanded products. The effect of starch type (native and waxy), RPC level (10, 40, 70 g/100 g), extrusion moisture content (24, 29 g/100 g) and barrel temperature (20–140 °C) on expansion, hardness, water absorption, and solubility of the extrudates and extruder response was evaluated. At temperatures above 120 °C, 70 g/100 g of RPC increased the sectional and volumetric expansion of extrudates, irrespective of starch type. Since expansion correlates with the rheological properties of the melt, RPC and RPC/starch blends were investigated pre- and postextrusion in a closed cavity rheometer at extrusion-like conditions. It was shown that with increasing RPC level the complex viscosity |ƞ*| of extruded starch/RPC blends increased, which could be linked to expansion behaviour.

BACKGROUND: The protein‐rich fractions of pulses and pseudocereals exhibit a well‐balanced amino acid profile, particularly when combined in different portions, and are therefore high‐value ingredients for the production of extruded snacks. However, the impact of a combination of pulses and pseudocereals on the physical and sensory qualities of extruded snacks has not been investigated up to now. Native or preconditioned protein isolates and concentrates from pulses – as single ingredients or in combination with protein‐rich flours of pseudocereals – were analyzed regarding their thermal and functional properties in relation to extrusion characteristics. Low moisture extrusion cooking was used to investigate the impact of protein source (lentil, lupin, faba bean), pseudocereal source (quinoa, amaranth, buckwheat) and protein content (30%, 50%, 70%) on sectional expansion, specific hardness, density and sensory properties of the snacks.RESULTS: With increasing protein content from 30% to 50%, the sectional expansion decreased and the density and specific hardness of the extrudates increased, which could be counteracted by preconditioning of the protein‐rich ingredients. Lupin protein‐based extrudates exhibited satisfactory texture and sensory properties. Extruded mixtures of pulses and pseudocereals (70% protein) exhibited a smaller sectional expansion compared to pulses as single ingredients (30%, 50%), regardless of pseudocereal type. However, the texture and sensory properties of the extruded blends were satisfactory.CONCLUSIONS: We show for the first time that protein‐rich fractions of pulses and pseudocereals can be processed into expanded snacks with favorable texture and nutritional properties such as increased protein contents (70%) and balanced amino acid profiles. © 2020 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.