CGChunqiu Guo

Chunqiu Guo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Chunqiu Guo has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Interlayer Interference Mechanisms and Key Controlling Factors in Low-Permeability Porous Carbonate Gas Reservoirs

    by Xinyu Bai, Chunqiu Guo, Pengyu Chen, Youyou Cheng, Liang Liang

    To address the pronounced interlayer productivity disparity and uneven reserve utilization during the development of multilayer low-permeability porous carbonate gas reservoirs, the G gas field on the right bank of the Amu Darya River was selected as the study area. Core-parallel physical simulation experiments, orthogonal numerical simulations, and production logging test (PLT) data were integrated to investigate the mechanisms of interlayer interference and its key controlling factors under multilayer commingled production. The results show that interlayer interference is primarily controlled by the permeability contrast and production differential. With increasing permeability contrast, high-permeability layers contribute a larger proportion of total production, whereas the utilization of medium- and low-permeability layers declines, thereby intensifying interlayer interference. Under the same permeability configuration, the interference coefficient increases with increasing production differential. Moreover, compared with the two-layer commingled-production cases, the three-layer system showed a stronger response to pressure-differential variation. When the production differential increased from 1 MPa to 5 MPa, the interference coefficient in the three-layer system increased from 9.84% to 27.83%, indicating more pronounced productivity loss in the medium- and low-permeability layers. Orthogonal numerical simulation indicates that the sensitivity of the main controlling factors follows the order of production differential ≥ permeability ratio > thickness ratio > gas viscosity. PLT data further validate the reliability of the experimental and numerical simulation results. During the development of Well G-22, the XVac layer consistently dominated gas production, whereas the XVm and XVp layers acted as supplementary contributors, indicating a dynamic production pattern in which high-permeability layers are preferentially activated and medium- and low-permeability layers contribute progressively at later stages. These findings demonstrate that permeability heterogeneity is the fundamental cause of interlayer interference, while the production differential serves as an important amplifying factor. This study provides a theoretical basis for zonal production allocation, optimization of the production differential, and stable production management in multilayer low-permeability porous carbonate gas reservoirs.

  • Open Access

    Well-Controlled Dynamic Reserves Calculation of Abnormally High-Pressured Gas Reservoirs Developed with Edge and Bottom Aquifers

    by Youyou Cheng, Xiang Luo, Tianyuan Lu, Chunqiu Guo, Chengqian Tan

    A material balance equation (MBE) is usually employed to estimate well-controlled dynamic reserves, but a more accurate calculation of these reserves is crucial. For abnormally pressured reservoirs with aquifers, the abnormally pressure and aquifer are difficult to determine, which leads to inaccurate calculations of well-controlled dynamic reserves. In this work, the MBE was established. Then, the correction function and abnormally pressure effect were deduced to determine well-controlled dynamic reserves calculations for weak aquifers and strong aquifers, respectively. For a weak aquifer, a pressure correction was determined to exist at a pressure coefficient of 1.2, and then the correction function was established to calculate the dynamic reserves. For a strong aquifer, the MBE derived by Walsh was employed to calculate the dynamic reserves and water influx. The relationship between the abnormally pressure effect and the dimensionless formation pressure was proposed. Classical, abnormally high-pressured gas reservoirs, Anderson L and Amu Darya, were selected to validate the accuracy and applicability of the newly developed methods. The results show that an abnormally high-pressure effect has a great influence on the dynamic reserves calculation in the early stage and the water influx has a stronger influence on the dynamic reserves calculation in the late stage.


  • Formation Mechanism and Distribution Characteristics of Residual Gas in Fractured-Porous Gas Reservoirs with Edge-Bottom Water

    by Peng-Yu Chen, Guang-Yao Wen, Chun-Qiu Guo, Yong Hu, Mu-Wei Cheng, Hai-Doing Shi, Liangjie Zhang, Yu-Zhong Xing, Yun-Zhu Li, Ming Li, et al.


  • Open Access

    Depositional and Diagenetic Controls on Reservoir Quality of Callovian-Oxfordian Stage on the Right Bank of Amu Darya

    by Yuzhong Xing, Hongjun Wang, Liangjie Zhang, Muwei Cheng, Haidong Shi, Chunqiu Guo, Pengyu Chen, Wei Yu

    Based on the detailed analysis of sedimentology, diagenesis, and petrophysics, this study characterized the Middle-Lower Jurassic Callovian-Oxfordian carbonate reservoirs of 68 key wells in the Amu Darya Basin and assessed the controlling factors on the quality of the target intervals. We identified 15 types of sedimentary facies developed in seven sedimentary environments using sedimentary facies analysis, such as evaporative platform, restricted platform, open platform, platform margin, platform fore-edge upslope, platform fore-edge downslope, and basin facies. The target intervals went through multiple diagenetic stages, including the syndiagenetic stage, early diagenetic stage, and middle diagenetic stage, all of which had a significant impact on the reservoir quality. Main diagenetic processes include dissolution and fracturing which improve the reservoir quality as well as cementation, compaction, and pressure solution that reduce the reservoir quality. By analyzing the reservoir quality, we identified nine fluid flow units and five types of reservoir facies. Among them, the dissolved grain-dominated reservoir facies is of the highest quality and is the best storage and flow body, while the microporous mud-dominated reservoir facies of platform fore-edge downslope and open marine facies is of the lowest quality and could not become the flow unit unless it was developed by fracturing.


  • Open Access

    Water Intrusion Characterization in Naturally Fractured Gas Reservoir Based on Spatial DFN Connectivity Analysis

    by Pengyu Chen, Mauricio Fiallos-Torres, Yuzhong Xing, Wei Yu, Chunqiu Guo, Joseph Leines-Artieda, Muwei Cheng, Hongbing Xie, Haidong Shi, Zhenyu Mao, et al.

    In this study, the non-intrusive embedded discrete fracture model (EDFM) in combination with the Oda method are employed to characterize natural fracture networks fast and accurately, by identifying the dominant water flow paths through spatial connectivity analysis. The purpose of this study is to present a successful field case application in which a novel workflow integrates field data, discrete fracture network (DFN), and production analysis with spatial fracture connectivity analysis to characterize dominant flow paths for water intrusion in a field-scale numerical simulation. Initially, the water intrusion of single-well sector models was history matched. Then, resulting parameters of the single-well models were incorporated into the full field model, and the pressure and water breakthrough of all the producing wells were matched. Finally, forecast results were evaluated. Consequently, one of the findings is that wellbore connectivity to the fracture network has a considerable effect on characterizing the water intrusion in fractured gas reservoirs. Additionally, dominant water flow paths within the fracture network, easily modeled by EDFM as effective fracture zones, aid in understanding and predicting the water intrusion phenomena. Therefore, fracture clustering as shortest paths from the water contacts to the wellbore endorses the results of the numerical simulation. Finally, matching the breakthrough time depends on merging responses from multiple dominant water flow paths within the distributions of the fracture network. The conclusions of this investigation are crucial to field modeling and the decision-making process of well operation by anticipating water intrusion behavior through probable flow paths within the fracture networks.