Aleksandra Nurzynska

Industrial hemp is a chemically rich plant increasingly explored within sustainable production systems aimed at the full utilization of all plant fractions. While hemp inflorescences have been extensively investigated, the biological potential of seed-depleted infructescences remains largely underexplored. This study compared essential oils (EOs) distilled from inflorescences and seed-depleted infructescences of hemp (Cannabis sativa L. cv. Futura 75). Their chemical composition was determined by gas chromatography–mass spectrometry (GC–MS), and their cytotoxicity, hemocompatibility, effects on blood coagulation, and antibacterial activity against a panel of 11 Gram-positive, Gram-negative, and microaerophilic bacterial strains were evaluated. The major EO constituents included α-Pinene, (E)-Caryophyllene, Myrcene, α-Humulene, Caryophyllene oxide, and Cannabidiol. EOs obtained from seed-depleted infructescences exhibited distinct chemical profiles, low cytotoxicity toward BJ human skin fibroblasts, minimal haemolytic activity, no significant effects on blood coagulation, and, in most cases, stronger antibacterial activity than inflorescence-derived EOs. Particularly high activity was observed against skin- and oral-associated bacteria, including Cutibacterium acnes and Streptococcus species. These findings demonstrate that seed-depleted infructescences represent underutilized post-harvest biomass and a valuable and sustainable source of biologically active EOs, supporting their further investigation for potential pharmaceutical, cosmetic, and oral healthcare applications.

Eruca vesicaria subsp. sativa (rocket) sprouts are a rich source of bioactive compounds used in cosmetics. Phytochemical profiling (LC-PDA-MS/MS) of 5-day-old sprouts identified 26 metabolites, mainly glucosinolates (e.g., glucoraphanin and glucoerucin) and flavonol glycosides of quercetin and kaempferol. The extracts exhibited strong antioxidant activity in DPPH^•, ABTS^•+, and ferric-reducing assays and moderate, dose-dependent inhibition of skin-degrading enzymes: tyrosinase, elastase, and collagenase, suggesting anti-wrinkle and skin-brightening effects. Cytotoxicity assays on human BJ skin fibroblasts demonstrated that the rocket sprout extracts were non-cytotoxic at concentrations up to 125 µg/mL, with low-dose treatments enhancing the cell viability. Hemocompatibility tests confirmed safety, with <2% hemolysis observed. The incorporation of these compounds into model emulsions yielded stable formulations over 90 days. These findings support the novelty of rocket sprout extracts as functional/nutricosmetic ingredients with relevance to both food and skin health.

The interest in the use of phytochemicals and herbal medicines for the treatment of acne vulgaris has grown steadily over recent decades. The research on the secondary metabolites and biological properties of bearberry (Arctostaphylos uva-ursi (L.) Spreng.) has been intensified in recent years, but the range of bacterial strains tested, many of which are highly relevant to human health, remains very limited. Therefore, the aim of this study was to evaluate the chemical composition and the antioxidant, antimicrobial, and cytotoxic activities of water and ethanolic bearberry leaf extracts. Compared with the ethanolic extract, the water extract was characterized by higher concentrations of arbutin, hydroquinone, corilagin, and hyperoside and the absence of ursolic acid and oleanolic acid. However, it exhibited lower total phenolic content and reduced levels of penta-O-galloyl-β-d-glucose (PGG). The ethanolic extract of bearberry leaves showed higher antioxidant activity and the most favorable overall biological properties. The therapeutic index (TI) values for the water and ethanolic extracts, respectively, were as follows: Cutibacterium acnes ATCC 11827 (10.70; 21.57), Propionibacterium acnes PCM 2334 (10.70; 43.13), P. acnes PCM (5.33; 21.57), Staphylococcus aureus ATCC 25923 (10.70; 21.57), and S. epidermidis ATCC 12228 (5.33; 10.78). The present findings further support the medicinal and cosmetic use of A. uva-ursi and highlight its potential as a source of natural antibacterial agents for acne treatment.

A 3D-printed poly(NaAc- co -AAc)-PVP-curdlan insert for exudating wounds. Compact and easy to use, it fits multilayer dressings. Its porous structure absorbs exudate and releases Ca ²⁺ to support hemostasis and tissue repair.

Arnica montana L. (mountain arnica) is a medicinal plant with diverse biological activities commonly used in pharmacy and cosmetics. The attributes of A. montana are related to e.g., the concentration and chemical composition of its essential oils (EOs). Therefore, the objective of this study was to: (i) characterize the chemical composition of EOs obtained from mountain arnica flower heads, rhizomes, and roots used as a pharmacopoeial material, (ii) demonstrate the effects of particular EO types and their combinations on antibacterial activity, and (iii) demonstrate the effect of the presence of A. montana EOs and their combinations with commercial antibiotics on their antibacterial activity. Essential oils obtained by hydrodistillation from different parts of A. montana were screened for their chemical composition and antibacterial properties. The chemical composition of the EOs was determined using the GC–MS technique. E-caryophyllene, caryophyllene oxide, germacrene D, farnesyl acetate, and dodecanal were the main components of the EO distilled from the flower heads. In turn, 2,5-dimethoxy-p-cymene, 2,6-diisopropylanisole, p-methoxyheptanophenone, and thymol methyl ether were the main molecules detected in the EO from the A. montana rhizomes and roots. The data clearly indicate that the presence of mountain arnica EO alone and in the interaction with commercial antibiotics (amoxicillin, ciprofloxacin, metronidazole) has a beneficial effect on their antibacterial activity.

The present article focuses on the characterization of the new biocomposites of poly(butylene succinate) (PBS) with fillers of plant origin such as onion peels (OP) and durum wheat bran WB (Triricum durum) subjected to composting and artificial aging. The susceptibility to fungal growth, cytotoxicity and antibacterial properties were also examined. The biodegradation of the samples was investigated under normalized conditions simulating an intensive aerobic composting process. It was shown that the tested natural fillers significantly accelerate the biodegradation process of the composition (after 90 days mass loss of PBS 7%) and that the samples with WB degrade much faster (corresponding mass loss 86%) than those containing OP (corresponding mass loss 21%). The remains of the samples after composting were subjected to chemical structure analysis (FTIR), and their thermal properties were determined using differential scanning calorimetry (DSC). It was shown that the degree of crystallinity of PBS and composites increased with the increasing time of composting. In the case of pure PBS, this increase was a maximum of 31.5%, for biocomposite with OP 31.1% and for those containing WB 21.2%. FTIR results showed that cleavage of polymer chains by hydrolysis took place during composting. The tested samples were also subjected to artificial aging under conditions simulating solar radiation and were sprayed with water. After artificial aging, the significant changes in the color of the samples as well as the porosity of their surface was noted, which was mainly due to the effect of photodegradation of both the used OP and WB fillers. Additionally, FTIR analysis indicated that samples were degraded by photooxidation processes. The ability of fungi to grow on the surface of the samples was also tested. The results demonstrate the possibility of using the developed biocomposite materials as a carbon source for the growth of fungi. The antibacterial tests showed that samples containing OP exhibited strong antibacterial properties regardless of their wt.% content. Additionally, a cytotoxicity test was performed on a BJ cell line, demonstrating that none of the tested biocomposites were cytotoxic. Moreover, those with the addition of WB statistically significantly supported the viability of both fibroblast and bacteria cells, showing their biological safety but lack of antibacterial activity.

This work presents the synthesis and characterization of new TPUs obtained by melt polyaddition using 1,1′-methanediylbis(4-isocyanatocyclohexane) (HMDI, Desmodur W^®), a new unconventional chain extender, i.e., (methanediyldibenze-ne-4,1-diyl)dimethanediol, and five types of soft segments differing in structure and molar masses. The structure of the obtained polymers was determined (by using the Fourier transform infrared spectroscopy and X-ray diffraction methods), and the physicochemical (reduced viscosity, density), optical (UV-VIS), processing (MFR) and thermal (DSC and TGA-FTIR) as well as surface, antibacterial and cytotoxic properties were determined. Based on the results obtained, it can be stated that the type of soft segment used significantly affects the properties of the obtained polymers. The most favorable properties for use in medicine were demonstrated by materials based on a polycarbonate soft segment.

Whey protein isolate (WPI) hydrogels are attractive biomaterials for application in bone repair and regeneration. However, their main limitation is low mechanical strength. Therefore, to improve these properties, the incorporation of ceramic phases into hydrogel matrices is currently being performed. In this study, novel whey protein isolate/calcium silicate (WPI/CaSiO₃) hydrogel biomaterials were prepared with varying concentrations of a ceramic phase (CaSiO₃). The aim of this study was to investigate the effect of the introduction of CaSiO₃ to a WPI hydrogel matrix on its physicochemical, mechanical, and biological properties. Our Fourier Transform Infrared Spectroscopy results showed that CaSiO₃ was successfully incorporated into the WPI hydrogel matrix to create composite biomaterials. Swelling tests indicated that the addition of 5% (w/v) CaSiO₃ caused greater swelling compared to biomaterials without CaSiO₃ and ultimate compressive strength and strain at break. Cell culture experiments demonstrated that WPI hydrogel biomaterials enriched with CaSiO₃ demonstrated superior cytocompatibility in vitro compared to the control hydrogel biomaterials without CaSiO₃. Thus, this study revealed that the addition of CaSiO₃ to WPI-based hydrogel biomaterials renders them more promising for bone tissue engineering applications.

Chronic wounds, among others, are mainly characterized by prolonged inflammation associated with the overproduction of reactive oxygen species and pro-inflammatory cytokines by immune cells. As a consequence, this phenomenon hinders or even precludes the regeneration process. It is known that biomaterials composed of biopolymers can significantly promote the process of wound healing and regeneration. The aim of this study was to establish whether curdlan-based biomaterials modified with hop compounds can be considered as promising candidates for the promotion of skin wound healing. The resultant biomaterials were subjected to an evaluation of their structural, physicochemical, and biological in vitro and in vivo properties. The conducted physicochemical analyses confirmed the incorporation of bioactive compounds (crude extract or xanthohumol) into the curdlan matrix. It was found that the curdlan-based biomaterials improved with low concentrations of hop compounds possessing satisfactory hydrophilicity, wettability, porosity, and absorption capacities. In vitro, tests showed that these biomaterials were non-cytotoxic, did not inhibit the proliferation of skin fibroblasts, and had the ability to inhibit the production of pro-inflammatory interleukin-6 by human macrophages stimulated with lipopolysaccharide. Moreover, in vivo studies showed that these biomaterials were biocompatible and could promote the regeneration process after injury (study on Danio rerio larvae model). Thus, it is worth emphasizing that this is the first paper demonstrating that a biomaterial based on a natural biopolymer (curdlan) improved with hop compounds may have biomedical potential, especially in the context of skin wound healing and regeneration.

The number of bone fractures and cracks requiring surgical interventions increases every year; hence, there is a huge need to develop new potential bone scaffolds for bone regeneration. The goal of this study was to gain knowledge about the basic properties of novel curdlan/whey protein isolate/hydroxyapatite biomaterials in the context of their use in bone tissue engineering. The purpose of this research was also to determine whether the concentration of whey protein isolate in scaffolds has an influence on their properties. Thus, two biomaterials differing in the concentration of whey protein isolate (i.e., 25 wt.% and 35 wt.%; hereafter called Cur_WPI25_HAp and Cur_WPI35_HAp, respectively) were fabricated and subjected to evaluation of porosity, mechanical properties, swelling ability, protein release capacity, enzymatic biodegradability, bioactivity, and cytocompatibility towards osteoblasts in vitro. It was found that both biomaterials fulfilled a number of requirements for bone scaffolds, as they demonstrated limited swelling and the ability to undergo controllable enzymatic biodegradation, to form apatite layers on their surfaces and to support the viability, growth, proliferation, and differentiation of osteoblasts. On the other hand, the biomaterials were characterized by low open porosity, which may hinder the penetration of cells though their structure. Moreover, they had low mechanical properties compared to natural bone, which limits their use to filling of bone defects in non-load bearing implantation areas, e.g., in the craniofacial area, but then they will be additionally supported by application of mechanically strong materials such as titanium plates. Thus, this preliminary in vitro research indicates that biomaterials composed of curdlan, whey protein isolate, and hydroxyapatite seem promising for bone tissue engineering applications, but their porosity and mechanical properties should be improved. This will be the subject of our further work.