HGHerri Gusmedi

Herri Gusmedi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Herri Gusmedi has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Policy-Driven Optimal Design of Grid-Connected Hybrid EV Charging Stations Using an Optimization-Based Policy Analysis Framework

    by Herri Gusmedi, Ahmad Saudi Samosir, Dikpride Despa, Fitra Dharma

    Renewable energy policies play a pivotal role in determining the economic viability of photovoltaic (PV)-based electric vehicle charging stations (EVCSs), yet their influence on optimal system design remains insufficiently understood because most optimization studies assume fixed regulatory conditions. Consequently, the effect of policy changes on investment decisions, technology sizing, and energy management has received limited attention. This study introduces an Optimization-Based Policy Analysis Framework (OBPAF) to systematically evaluate how alternative policy instruments reshape the optimal configuration of grid-connected PV–battery energy storage system (BESS) EVCSs. The proposed framework integrates a hybrid EVCS mathematical model with Non-dominated Sorting Genetic Algorithm III (NSGA-III), M/M/c queueing theory, Life Cycle Assessment (LCA), and the Technique for Order Preference by Similarity to Ideal Solution (TOPSIS) within a unified multi-objective optimization framework. Six policy scenarios, including Baseline, Net Billing (100% and 65%), Net Metering (100% and 65%), and Carbon Credit, were assessed using identical mathematical models and optimization settings. The comparative analysis confirms that the optimal EVCS configuration is policy-dependent, with regulatory mechanisms exerting a greater influence on technology sizing than the optimization algorithm itself. Net Billing with full export compensation achieved the highest Net Present Value (IDR 6.057 billion) and the largest life-cycle CO2 emission reduction (69.31%), whereas Net Metering with full compensation produced the lowest Levelized Cost of Charging (IDR 562.34 kWh−1), the shortest payback period (7.40 years), and greater reliance on self-consumed solar energy. By contrast, the Carbon Credit scenario produced only marginal improvements under the assumed carbon price. These findings demonstrate that OBPAF extends multi-objective optimization beyond technology sizing into a quantitative framework for evidence-based evaluation of renewable energy policies supporting future EVCS deployment.

  • Open Access

    Design and implementation of a buck converter-based PV emulator using dynamic evolution control

    by Ahmad Saudi Samosir, Dikpride Despa, Herri Gusmedi, Sony Ferbangkara

    This paper presents the design, simulation, and experimental implementation of a photovoltaic (PV) emulator based on a buck converter controlled using the dynamic evolution control (DEC) technique. The proposed system accurately reproduces the nonlinear current-voltage (I-V) and power-voltage (P-V) characteristics of a commercial GREEN CELL SM100-18P (100 Wp) PV module under standard test conditions (1000 W/m2, 25 °C). The electrical characteristics of the reference module are embedded in the controller through a lookup table (LUT), which is integrated with the DEC algorithm to enable adaptive real-time regulation of output voltage and current. System modeling and validation are first conducted in MATLAB/Simulink to analyze steady-state and transient performance. A hardware prototype based on an XL4016 buck converter and Arduino Nano microcontroller is then implemented, with real-time monitoring provided via an ILI9341 TFT display. Experimental results show that the emulator achieves a maximum power deviation of 0.8%, a normalized root mean square error (RMSE) of 0.015, a settling time of approximately 12 ms, overshoot below 1.5%, voltage ripple under 2%, and peak conversion efficiency of 94% near the MPP region. These results confirm that the proposed PV emulator provides accurate static and dynamic reproduction of PV characteristics, offering a low-cost, stable, and repeatable platform for laboratory-scale evaluation of PV-related power electronic converters.

  • Open Access

    Feasibility Analysis of On-Grid PV Power Plant as a Source of Electric Vehicle Charging Station (EVCS).

    by Herri Gusmedi

    The reliance on fossil fuels for Energy and transportation has detrimental effects on the environment, contributing to CO2 emissions, global warming, and air pollution. The Ministry of Energy and Mineral Resources (KESDM) has set an ambitious target to achieve a primary energy mix of 31% renewable sources by 2050 as part of Indonesia's commitment to reach Net Zero Emissions (NZE) by 2060. In alignment with this goal, Indonesia has enacted Presidential Decree No. 55 of 2019 to promote accelerating electric vehicles (EVs) for road transport. This initiative and developing the necessary charging infrastructure for electric vehicles (EVCS) are essential. Harnessing Solar Power Plants to supply Energy for EVCS is a viable solution for achieving a sustainable future. EVCS is powered by the PLN network, which predominantly relies on fossil fuels. Implementing an On-Grid PV Power Plant as an energy source for Electric Vehicle Charging Stations (EVCS) is intended to decrease reliance on fossil fuels and facilitate the transition to clean Energy. The approach involves optimizing the system's configuration by analyzing technical performance, emissions, and economic feasibility. A PV Power Plant with 75 modules can generate up to 58.54 MWh of Energy per Year, sufficiently covering the EVCS 's electric demand of 17 MWh annually. This system is projected to reduce carbon emissions by 1,029 tCO_2 eq. From an economic and investment perspective, the analysis indicates a positive Net Present Value (NPV), a Payback Period of approximately 11.57 years, and a Profitability Index of 1.38, suggesting that the project is financially viable.

  • Open Access

    Design and implementation of PV emulator based on synchronous buck converter using Arduino Nano microcontroller

    by Ahmad Saudi Samosir, Herri Gusmedi, Alfin Fitrohul Huda

    This paper discusses the comprehensive design and implementation of a photovoltaic (PV) emulator hardware using a synchronous buck converter. The primary objective is to simulate the electrical characteristics of a real PV module under varying environmental conditions. The process involves detailed simulations carried out using MATLAB/Simulink software to evaluate the performance and accuracy of the emulator model. Various load values were tested to account for the impact of fluctuations in radiation and temperature. The accuracy of the emulator's output characteristics was validated by comparing them with the actual attributes of the SolarWorld Sun-module SW50 PV module. The final step involves constructing the hardware of the PV emulator using electronic components, with an Arduino Nano employed as the controller.


  • Open Access

    DESAIN PEMBANGKIT LISTRIK TENAGA SURYA (PLTS) ON-GRID 60 KWP

    by Herri Gusmedi, Rizki Pratama Putra, Ahmad Saudi Samosir

    Pada 2021, sektor energi Indonesia menghasilkan hampir 600 MtCO2, terutama dari industri energi pembangkitan listrik. Sektor ini menyumbang 50% dari total semua sektor yang menyumbang emisi di Indonesia. Sektor energi sangat berpeluangan sebagai sasaran dalam transisi energi dalam mengurangi emisi karbon akibat bahan bakar fosil. Penelitian ini bertujuan merencanakan Sistem Pembangkit Listrik Tenaga Surya (PLTS) On-Grid. Metode penelitian meliputi perancangan sistem PLTS On-Grid di Gedung Serba Guna Universitas Lampung dengan kapasitas 60 kWp dan simulasi menggunakan perangkat lunak PVSyst 7.4 untuk mendapatkan potensi energi berdasarkan data radiasi matahari dan suhu pada Meteonorm 8.1 dan menguji performa sistem. Hasil simulasi menunjukkan bahwa PLTS On-Grid ini mampu menghasilkan energi sebesar 88,636 MWh/tahun dengan nilai Performance Ratio sebesar 84,34%, Capacity Utilization Factor sebesar 16,85%, nilai Reference Yield tahunan mencapai 1749,8 kWh/kWp, nilai Array Yield tahunan mencapai 1504,5 kWh/kWp, dan nilai Final Yield tahunan mencapai 1475,8 kWh/kWp. Hasil ini mengindikasikan bahwa sistem PLTS yang dirancang dapat beroperasi secara efisien dalam mengkonversi energi matahari menjadi energi listrik.


  • Open Access

    Maximizing Self-Consumption in Industrial Hybrid PV Systems: A Case Study on Indonesia's Energy Policies

    by Herri Gusmedi, Osea Zebua, Alif Ghia Khairan, Ahmad Saudi Samosir

    An environmentally friendly source of energy is an urgent demand. Recent advances in solar technology, especially when combined with energy storage batteries, have generated high hopes for the potential of the solar energy revolution. However, in Indonesia, the deployment of solar panels in industrial environments is limited by policies that limit the power generation allowed. Permitted rooftop solar systems in the industrial sector, under the National Electricity Company (PLN) framework, are limited to 10%-15% of the connected electricity capacity. The study focuses on assessing the level of self-consumption in industrial-scale hybrid photovoltaic (PV) systems by exploring three scenarios: maximizing self-consumption, peak shaving, and utilizing batteries exclusively at night. The findings show that when solar panel capacity accounts for only 15% of peak load demand, the ratio of own consumption to total energy demand, known as the Self-Sufficiency Rate (SSR), reaches about 5.113%. However, assuming that the load data represents only 15% of the total actual load, the SSR increases significantly to 30.157%. This variation results from energy production that is aligned with energy demand. As a result, promoting policies that facilitate optimal utilization of solar panels and batteries is recommended to achieve higher levels of self-consumption and reduce dependence on conventional energy sources.


  • Open Access

    Maximizing Self-Consumption in Industrial Hybrid PV Systems: A Case Study on Indonesia's Energy Policies

    by Herri Gusmedi, Osea Zebua, Alif Ghia Khairan, Ahmad Saudi Samosir

    An environmentally friendly source of energy is an urgent demand. Recent advances in solar technology, especially when combined with energy storage batteries, have generated high hopes for the potential of the solar energy revolution. However, in Indonesia, the deployment of solar panels in industrial environments is limited by policies that limit the power generation allowed. Permitted rooftop solar systems in the industrial sector, under the National Electricity Company (PLN) framework, are limited to 10%-15% of the connected electricity capacity. The study focuses on assessing the level of self-consumption in industrial-scale hybrid photovoltaic (PV) systems by exploring three scenarios: maximizing self-consumption, peak shaving, and utilizing batteries exclusively at night. The findings show that when solar panel capacity accounts for only 15% of peak load demand, the ratio of own consumption to total energy demand, known as the Self-Sufficiency Rate (SSR), reaches about 5.113%. However, assuming that the load data represents only 15% of the total actual load, the SSR increases significantly to 30.157%. This variation results from energy production that is aligned with energy demand. As a result, promoting policies that facilitate optimal utilization of solar panels and batteries is recommended to achieve higher levels of self-consumption and reduce dependence on conventional energy sources.

  • Open Access

    Dynamic evolution control for the DC/DC boost converter design and implementation

    by Ahmad Saudi Samosir, Sri Ratna Sulistiyanti, Herri Gusmedi, Luthfiyyatun Mardiyah

    This paper introduces the design and hardware implementation of the dynamic evolution control for a DC/DC boost converter. The development of the controller aims to effectively regulate the output voltage of the DC/DC boost converter with a high degree of precision. A comprehensive examination of the duty cycle formula for the boost converter is conducted using a non-linear analysis approach. This study introduces a methodology for the synthesis of a converter controller utilizing the principles of dynamic evolution control theory. The converter's output consistently aligns with the target voltage by following the dynamic evolution path determined by the designed controller. The performance evaluation of the proposed boost converter controller utilizing dynamic evolution control is being validated through the utilization of MATLAB/Simulink simulation software. The effectiveness of the proposed controller is further validated through the presentation of hardware results. The performance of the controller was evaluated by varying the values of parameters k and m.


  • Open Access

    Vector Form Implementation in Three-Phase Power Flow Analysis Based on Power Injection Rectangular Coordinate

    by Lukmanul Hakim, Fandi Prayoga, Khairudin Khairudin, Herri Gusmedi

    Vector Form Implementation in Three-Phase Power Flow Analysis Based on Power Injection Rectangular Coordinate