Yongjun Gong
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yongjun Gong has a total of 36 co-authors. Here are the top co-authors by number of shared publications:
- Zengmeng Zhang
Naval Architecture and Ocean Engineering, Dalian Maritime University, Dalian, China
7 shared publications - Jinkai Che
College of Naval Architecture and Ocean Engineering Dalian Maritime University Dalian China
3 shared publications - Dayong Ning
Naval Architecture and Ocean Engineering College, Dalian Maritime University, Dalian 116026, China
2 shared publications Dewen Zhang
2 shared publicationsJinkai Che
College of Naval Architecture and Ocean Engineering, Dalian Maritime University , Dalian, Liaoning 116026, China
2 shared publications- Yinglong Chen
Naval Architecture and Ocean Engineering, Dalian Maritime University, Dalian, China
2 shared publications
Latest Publications
- 11 April 2025
- Published by Springer Nature in Marine Systems & Ocean Technology
- Vol. 20 (2) , 1-13
Study of bionic module driven by water hydraulic artificial muscles for underwater continuum robot
- 11 April 2025
- Published by Springer Nature in Marine Systems & Ocean Technology
- Vol. 20 (2) , 1-13
Study of bionic module driven by water hydraulic artificial muscles for underwater continuum robot
- Open Access
- 21 March 2025
- Published by Association for Computing Machinery (ACM)
- p. 337-342
Digital Twin System for Attitude and Stress of Machinery Equipment
- 21 March 2025
- Published by Association for Computing Machinery (ACM)
- p. 337-342
Open AccessDigital Twin System for Attitude and Stress of Machinery Equipment
- Open Access
- 4 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (5) , 2754
Simulation and Experimental Research on Composite Diaphragm Hydraulic Force/Displacement Amplification Mechanism with Adjustable Initial Volume
To improve the practicability of electro-mechanical converters in hydraulic systems, especially in control valves, a hydraulic force/displacement amplification mechanism was addressed. The amplification mechanism includes a rolling diaphragm (RD) and a corrugated diaphragm (CD), and the amplification function is achieved using the area difference between the RD and the CD. To investigate the amplification characteristics of the mechanism, the diaphragm forces were analyzed by finite element simulations, and the dynamic model of the system was established in Simulink, based on the force balance method. Furthermore, an amplification mechanism prototype was fabricated, and the static and dynamic experiments were carried out. Combining the simulation and experiment results, the accuracy of the proposed dynamic model was verified, and the amplification characteristics of the amplification mechanism were analyzed. When the RD displacement is less than 2 mm, the force amplification effect is not obvious. When the RD displacement exceeds 2 mm, the force amplification ratio (FAR) increases with the RD displacement and decreases with the CD displacement. The maximum FAR is 2.5 with a CD displacement of 0 and an RD displacement of 6 mm. The amplification mechanism and the used research method are helpful for the application and control of the hydraulic valves.
- 4 March 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (5) , 2754
Open AccessSimulation and Experimental Research on Composite Diaphragm Hydraulic Force/Displacement Amplification Mechanism with Adjustable Initial Volume
To improve the practicability of electro-mechanical converters in hydraulic systems, especially in control valves, a hydraulic force/displacement amplification mechanism was addressed. The amplification mechanism includes a rolling diaphragm (RD) and a corrugated diaphragm (CD), and the amplification function is achieved using the area difference between the RD and the CD. To investigate the amplification characteristics of the mechanism, the diaphragm forces were analyzed by finite element simulations, and the dynamic model of the system was established in Simulink, based on the force balance method. Furthermore, an amplification mechanism prototype was fabricated, and the static and dynamic experiments were carried out. Combining the simulation and experiment results, the accuracy of the proposed dynamic model was verified, and the amplification characteristics of the amplification mechanism were analyzed. When the RD displacement is less than 2 mm, the force amplification effect is not obvious. When the RD displacement exceeds 2 mm, the force amplification ratio (FAR) increases with the RD displacement and decreases with the CD displacement. The maximum FAR is 2.5 with a CD displacement of 0 and an RD displacement of 6 mm. The amplification mechanism and the used research method are helpful for the application and control of the hydraulic valves.
- Open Access
- 26 September 2024
- Published by Elsevier in Results in Engineering
- Vol. 24
The effects of fiber load and frictional work on fatigue behavior of water hydraulic artificial muscles in underwater environment
- 26 September 2024
- Published by Elsevier in Results in Engineering
- Vol. 24
Open AccessThe effects of fiber load and frictional work on fatigue behavior of water hydraulic artificial muscles in underwater environment
- 21 May 2024
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 146 (4) , 1-66
Simulation and Experiments on Sealing and Extrusion Failure on Application of Deep-Sea Adsorption by Differential Pressure
Negative pressure adsorption can make use of deep-sea environmental pressure to provide a great adsorption force and it is a suitable fixed method for deep-sea applications. However, the deep-sea environment puts forward higher requirements for the sealing performance of negative pressure suction cups, so a more adaptable suction cup sealing device is needed. In this paper, a deep-sea adsorption device with rigid suction cups is designed, and the suction cup is sealed by O-ring. The influence of both section diameter and inner diameter of the O-ring on its preload, suction force, and extrusion failure is tested and analyzed. Moreover, the fitting formula is given to guide the selection of the section diameter and inner diameter of the O-ring. Furthermore, according to the summary of the experimental phenomenon, dual-accumulators configuration with stage pressures method is created, and the theoretical basis that the suction cup can achieve a larger suction force under the condition of a small preload force is given, which can provide a reference for the design of deep-sea adsorption devices and sealing structure.
- 21 May 2024
- Published by ASME International in Journal of Pressure Vessel Technology
- Vol. 146 (4) , 1-66
Simulation and Experiments on Sealing and Extrusion Failure on Application of Deep-Sea Adsorption by Differential Pressure
Negative pressure adsorption can make use of deep-sea environmental pressure to provide a great adsorption force and it is a suitable fixed method for deep-sea applications. However, the deep-sea environment puts forward higher requirements for the sealing performance of negative pressure suction cups, so a more adaptable suction cup sealing device is needed. In this paper, a deep-sea adsorption device with rigid suction cups is designed, and the suction cup is sealed by O-ring. The influence of both section diameter and inner diameter of the O-ring on its preload, suction force, and extrusion failure is tested and analyzed. Moreover, the fitting formula is given to guide the selection of the section diameter and inner diameter of the O-ring. Furthermore, according to the summary of the experimental phenomenon, dual-accumulators configuration with stage pressures method is created, and the theoretical basis that the suction cup can achieve a larger suction force under the condition of a small preload force is given, which can provide a reference for the design of deep-sea adsorption devices and sealing structure.
- 8 May 2023
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 46 (8) , 2864-2877
Analysis on fatigue behavior of water hydraulic artificial muscles under different elastic loads in underwater environment
As a novel and flexible actuator, the water hydraulic artificial muscle (WHAM) has become at the forefront of bionic robot research. In order to explore the fatigue behavior of WHAM, the lifetime of WHAM was analyzed based on the crack propagation of neoprene rubber and the S‐N curve of aramid fiber. Meanwhile, WHAM's fatigue tests were carried out, and the fatigue life exceeded 56,000 cycles under the pressure of 2 MPa and the elastic load of 1030.7 N/mm. In addition, WHAM's fatigue failure is represented as the burst of the rubber tube after fiber fracture. Moreover, heavy load aggravates fibrillation that leads to severe fracture of fibrils under similar friction, and the fatigue life of WHAM is aggravatingly shortened by the coupling of fibrillation and friction. Finally, an empirical model of fatigue life was obtained, which can predict the lifetime of WHAM.
- 8 May 2023
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 46 (8) , 2864-2877
Analysis on fatigue behavior of water hydraulic artificial muscles under different elastic loads in underwater environment
As a novel and flexible actuator, the water hydraulic artificial muscle (WHAM) has become at the forefront of bionic robot research. In order to explore the fatigue behavior of WHAM, the lifetime of WHAM was analyzed based on the crack propagation of neoprene rubber and the S‐N curve of aramid fiber. Meanwhile, WHAM's fatigue tests were carried out, and the fatigue life exceeded 56,000 cycles under the pressure of 2 MPa and the elastic load of 1030.7 N/mm. In addition, WHAM's fatigue failure is represented as the burst of the rubber tube after fiber fracture. Moreover, heavy load aggravates fibrillation that leads to severe fracture of fibrils under similar friction, and the fatigue life of WHAM is aggravatingly shortened by the coupling of fibrillation and friction. Finally, an empirical model of fatigue life was obtained, which can predict the lifetime of WHAM.
- Open Access
- 1 January 2023
- Published by Tech Science Press in Fluid Dynamics & Materials Processing
- Vol. 19 (3) , 651-662
Simulation of Seabed Erosion Produced by an Inclined Jet
Water jets are widely used in seabed scouring and desilting applications. In the present work, dedicated tests have been conducted using a jet scour model test platform and sand beds containing grains with different sizes. The FLOW-3D simulation software has also been used to tackle the problem form a numerical point of view. The boundary conditions of the simulation have been optimized to reduce the gap between the numerical results and the outcomes of the experimental tests. Scour area calculation has been based on a RNG k-ε Turbulence model. Moreover, the FAVOR (Fractional Area Volume Obstacle Representation) technology has been selected for grid division to make the simulation results more accurate. Jet scours with inclination angles of 10–20° have been simulated. It has been found that jet scouring is greatly affected by the environmental water flow, that is, water flow can weaken the scouring capacity of the jets.
- 1 January 2023
- Published by Tech Science Press in Fluid Dynamics & Materials Processing
- Vol. 19 (3) , 651-662
Open AccessSimulation of Seabed Erosion Produced by an Inclined Jet
Water jets are widely used in seabed scouring and desilting applications. In the present work, dedicated tests have been conducted using a jet scour model test platform and sand beds containing grains with different sizes. The FLOW-3D simulation software has also been used to tackle the problem form a numerical point of view. The boundary conditions of the simulation have been optimized to reduce the gap between the numerical results and the outcomes of the experimental tests. Scour area calculation has been based on a RNG k-ε Turbulence model. Moreover, the FAVOR (Fractional Area Volume Obstacle Representation) technology has been selected for grid division to make the simulation results more accurate. Jet scours with inclination angles of 10–20° have been simulated. It has been found that jet scouring is greatly affected by the environmental water flow, that is, water flow can weaken the scouring capacity of the jets.
- 22 June 2021
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 30 (8) , 085013
Effects of the geometry and material properties on the mechanical strength and failure modes of water hydraulic artificial muscles
To develop high-strength water hydraulic artificial muscle (WHAM) and ensure its reliability, the failure mechanism and the main effect factors of WHAM’s strength were studied. WHAM’s failure modes consist of end fitting slipping out, fibre sleeve loosening, the end of rubber tube breaking, rubber tube coming out from fibre sleeve and fibre fracture. It can be preliminarily confirmed that the strength of WHAM is mainly related to fibre sleeve, rubber tube and end fitting structure. Therefore, effects of structure and material properties on WHAM’s strength and failure modes were analysed. The structure parameters contain the initial braid angle, the number of fibre bundles, the rubber tube wall thickness, the diameter of crimping rings, and the number of crimping rings. The fibre spacing was optimized according to the analysis of the ratio of fibre sleeve coverage area to rubber tube outer wall area. The number of end fitting’s barbs and the crimping rings were improved by strength test. Moreover, it can be confirmed that the initial braid angle, fibre sleeve material, rubber tube wall thickness and deformation of rubber tube have strong effects on WHAM’s strength. Aiming to obtain the level of significance for effect factors and an appropriate set of structure parameters, the orthogonal experiment with four factors and two levels was designed. The structure parameters of high-strength WHAM were obtained according to the orthogonal analysis, which can provide theoretical guidance for high-strength WHAM design. The tests results show that the improved structure can effectively avoid the failure modes of end fitting slipping out, fibre sleeve loosening, and rubber tube coming out from fibre sleeve. Finally, only two kinds of failure modes, the end of rubber tube breaking and fibre fracture, occurred. The reliability of WHAM can be improved by studying the WHAM’s strength and failure modes.
- 22 June 2021
- Published by IOP Publishing in Smart Materials and Structures
- Vol. 30 (8) , 085013
Effects of the geometry and material properties on the mechanical strength and failure modes of water hydraulic artificial muscles
To develop high-strength water hydraulic artificial muscle (WHAM) and ensure its reliability, the failure mechanism and the main effect factors of WHAM’s strength were studied. WHAM’s failure modes consist of end fitting slipping out, fibre sleeve loosening, the end of rubber tube breaking, rubber tube coming out from fibre sleeve and fibre fracture. It can be preliminarily confirmed that the strength of WHAM is mainly related to fibre sleeve, rubber tube and end fitting structure. Therefore, effects of structure and material properties on WHAM’s strength and failure modes were analysed. The structure parameters contain the initial braid angle, the number of fibre bundles, the rubber tube wall thickness, the diameter of crimping rings, and the number of crimping rings. The fibre spacing was optimized according to the analysis of the ratio of fibre sleeve coverage area to rubber tube outer wall area. The number of end fitting’s barbs and the crimping rings were improved by strength test. Moreover, it can be confirmed that the initial braid angle, fibre sleeve material, rubber tube wall thickness and deformation of rubber tube have strong effects on WHAM’s strength. Aiming to obtain the level of significance for effect factors and an appropriate set of structure parameters, the orthogonal experiment with four factors and two levels was designed. The structure parameters of high-strength WHAM were obtained according to the orthogonal analysis, which can provide theoretical guidance for high-strength WHAM design. The tests results show that the improved structure can effectively avoid the failure modes of end fitting slipping out, fibre sleeve loosening, and rubber tube coming out from fibre sleeve. Finally, only two kinds of failure modes, the end of rubber tube breaking and fibre fracture, occurred. The reliability of WHAM can be improved by studying the WHAM’s strength and failure modes.
- 31 May 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (2) , 1067-1082
A modified physical model of high-strength water hydraulic artificial muscles considering the effects of geometry and material properties
Compared with pneumatic artificial muscles (PAMs), water hydraulic artificial muscles (WHAMs) have the advantages of high force/weight ratio, high stiffness, rapid response speed, large operating pressure range, low working noise, etc. Although the physical models of PAMs have been widely studied, the model of WHAMs still need to be researched for the different structure parameters and work conditions between PAMs and WHAMs. Therefore, the geometry and the material properties need to be considered in models, including the wall thickness of rubber tube, the geometry of ends, the elastic force of rubber tube, the elongation of fibers, and the friction among fiber strands. WHAMs with different wall thickness and fiber materials were manufactured, and static characteristic experiments were performed when the actuator is static and fixed on both ends, which reflects the relationship between contraction force and pressure under the different contraction ratio. The deviations between theoretical values and experimental results were analyzed to investigate the effect of each physical factor on the modified physical model accuracy at different operating pressures. The results show the relative error of the modified physical model was 7.1% and the relative error of the ideal model was 17.4%. When contraction ratio is below 10% and operating pressure is 4 MPa, the wall thickness of rubber tube was the strongest factor on the accuracy of modified model. When the WHAM contraction ratio from 3% to 20%, the relative error between the modified physical model and the experimental data was within ±10%. Considering the various physical factors, the accuracy of the modified physical model of WHAM is improved, which lays a foundation of non-linear control of the high-strength, tightly fiber-braided and thick-walled WHAMs.
- 31 May 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 236 (2) , 1067-1082
A modified physical model of high-strength water hydraulic artificial muscles considering the effects of geometry and material properties
Compared with pneumatic artificial muscles (PAMs), water hydraulic artificial muscles (WHAMs) have the advantages of high force/weight ratio, high stiffness, rapid response speed, large operating pressure range, low working noise, etc. Although the physical models of PAMs have been widely studied, the model of WHAMs still need to be researched for the different structure parameters and work conditions between PAMs and WHAMs. Therefore, the geometry and the material properties need to be considered in models, including the wall thickness of rubber tube, the geometry of ends, the elastic force of rubber tube, the elongation of fibers, and the friction among fiber strands. WHAMs with different wall thickness and fiber materials were manufactured, and static characteristic experiments were performed when the actuator is static and fixed on both ends, which reflects the relationship between contraction force and pressure under the different contraction ratio. The deviations between theoretical values and experimental results were analyzed to investigate the effect of each physical factor on the modified physical model accuracy at different operating pressures. The results show the relative error of the modified physical model was 7.1% and the relative error of the ideal model was 17.4%. When contraction ratio is below 10% and operating pressure is 4 MPa, the wall thickness of rubber tube was the strongest factor on the accuracy of modified model. When the WHAM contraction ratio from 3% to 20%, the relative error between the modified physical model and the experimental data was within ±10%. Considering the various physical factors, the accuracy of the modified physical model of WHAM is improved, which lays a foundation of non-linear control of the high-strength, tightly fiber-braided and thick-walled WHAMs.
- Open Access
- 27 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 200669-200679
The Effects of Manufacturing Parameters on Static Characteristics of Water Hydraulic Artificial Muscles
The static characteristics of water hydraulic artificial muscles (WHAMs) are related to operating parameters and manufacturing parameters. Operating parameters include working pressure and contraction ratio. Manufacturing parameters include initial braiding angle, fiber sleeve material, and initial rubber tube thickness. These manufacturing parameters fundamentally influence the static characteristics of artificial muscle. Orthogonal experiments were designed with an initial braiding angle of 25 degrees and 32 degrees, fiber sleeve of UHMWPE and aramid 1414, and initial rubber tube thickness of 2mm and 3mm to study the significance level of the effects of these factors and their interactions on the static characteristics of WHAMs. Experiments were carried out at different contractions to study the relationship between contraction force and working pressure, and Analysis of Variance (ANOVA) analyzed the test data. The analysis results showed that the significance level of the initial braid angle on WHAM’s static characteristics is the most significant; the significance level of fiber sleeve material and initial rubber tube thickness on the static characteristics of WHAMs depends on the working pressure and contractions. The analysis results help people fabricate different WHAM types according to the working conditions, which help people better control the contraction forces.
- 27 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 8, 200669-200679
Open AccessThe Effects of Manufacturing Parameters on Static Characteristics of Water Hydraulic Artificial Muscles
The static characteristics of water hydraulic artificial muscles (WHAMs) are related to operating parameters and manufacturing parameters. Operating parameters include working pressure and contraction ratio. Manufacturing parameters include initial braiding angle, fiber sleeve material, and initial rubber tube thickness. These manufacturing parameters fundamentally influence the static characteristics of artificial muscle. Orthogonal experiments were designed with an initial braiding angle of 25 degrees and 32 degrees, fiber sleeve of UHMWPE and aramid 1414, and initial rubber tube thickness of 2mm and 3mm to study the significance level of the effects of these factors and their interactions on the static characteristics of WHAMs. Experiments were carried out at different contractions to study the relationship between contraction force and working pressure, and Analysis of Variance (ANOVA) analyzed the test data. The analysis results showed that the significance level of the initial braid angle on WHAM’s static characteristics is the most significant; the significance level of fiber sleeve material and initial rubber tube thickness on the static characteristics of WHAMs depends on the working pressure and contractions. The analysis results help people fabricate different WHAM types according to the working conditions, which help people better control the contraction forces.