LQLongheng Qi

Longheng Qi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Longheng Qi has a total of 11 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Monolithic full-color active-matrix micro-LED micro-display using InGaN/AlGaInP heterogeneous integration

    by Longheng Qi, Peian Li, Xu Zhang, Ka Ming Wong, Kei May Lau

    A prototype of full-color active-matrix micro-light-emitting diode (micro-LED) micro-display with a pixel density of 391 pixel per inch (ppi) using InGaN/AlGaInP heterogeneous integration is demonstrated. InGaN blue/green dual-color micro-LED arrays realized on a single metal organic chemical vapor deposition (MOCVD)-grown GaN-on-Si epiwafer and AlGaInP red micro-LED arrays are both monolithically fabricated, followed by the integration with a common complementary metal oxide semiconductor (CMOS) backplane via flip-chip bonding technology to form a double-layer thin-film display structure. Full-color images with decent color gamut and brightness are successfully displayed through the fine adjustment of driving current densities of RGB subpixels. This full-color display combines the advantages of high quantum efficiency of InGaN material on blue/green light and AlGaInP material on red light through heterogeneous integration and high pixel density through monolithic fabrication approach, demonstrating the feasibility and prospects of high brightness, good color performance, and high-resolution micro-LED micro-displays in future metaverse applications.


  • Open Access

    Monolithic active-matrix full-color micro-LED micro-display using InGaN/AlGaInP heterogeneous integration

    by Longheng Qi, Peian Li, Xu Zhang, Ka Ming Wong, Kei Lau

    A prototype of active-matrix driven full-color micro-LED micro- display with a resolution of 200 × 80 is demonstrated using InGaN/AlGaInP heterogeneous integration. InGaN blue/green dual-color micro-LED arrays on a single MOCVD-grown GaN-on-Si epi-wafer and AlGaInP red micro-LED arrays were both monolithically fabricated, followed by the integration with a common CMOS backplane via flip-chip bonding technology to form a double-layer thin-film display structure. Full-color images with decent color gamut and brightness were successfully displayed by fine adjustment of the driving current densities of RGB subpixels. This integration method combines the benefits of the highly efficient InGaN blue/green emission with AlGaInP red light emission. The high pixel density demonstrated using the monolithic fabrication method shows the feasibility and promise for high brightness, good color performance and high-resolution micro-LED micro-displays towards future metaverse applications.

  • Monolithically integrated high-resolution full-color GaN-on-Si micro-LED microdisplay

    by Longheng Qi, Xu Zhang, Wing Cheung Chong, Kei May Lau

    Full-color micro-LED displays are being widely developed and regarded as a primary option in current microdisplay technologies to fulfill the urgent demands of metaverse applications in the next decade. In this paper, a monolithic full-color micro-LED microdisplay with a resolution of 423 pixels per inch is demonstrated through the integration of a blue GaN-on-Si display module and a quantum dots photoresist (QDs-PR) color conversion module. The 400 × 240 active-matrix blue micro-LED display with a dominant wavelength of 440 nm was monolithically fabricated using GaN-on-Si epiwafers and flip-chip bonded on a custom-designed complementary metal-oxide semiconductor backplane. A color conversion module was independently fabricated on a 4-in. sapphire substrate by applying red and green QDs-PR arrays and a color filter array through the standard lithography process. Combining the blue GaN-on-Si micro-LED display module and the lithography-based QDs-PR color conversion module, a full-color micro-LED display was achieved with a wide color gamut up to 104% of the standard red, green, and blue and a maximum brightness of over 500 nits. The influence of blue light leakage resulting from the possible misalignment of flip-chip bonding and crosstalk in the bottom GaN-on-Si display was investigated in which the percentages of efficient pumping light for the blue, green, and red subpixels are around 95%, 89%, and 92%, respectively. This prototype demonstrates potential scalability and low-cost volume production of high-resolution full-color micro-LED microdisplays soon.


  • Full-color micro-display by heterogeneous integration of InGaN blue/green dual-wavelength and AlGaInP red LEDs

    by Peian Li, Xu Zhang, Longheng Qi, Kei May Lau

    A full-color micro-display via bonding of a InGaN blue/green dual-wavelength light-emitting diode (LED) array and a AlGaInP red LED array is demonstrated. The micro-display has a 120 µm pixel pitch, and each pixel consists of 40 µm × 120 µm red/green/blue (R/G/B) subpixels. The red LED array was integrated with the blue/green dual-wavelength LED array by Au/In flip-chip bonding to achieve full-color emission. Full-color images presented by the micro-display have high brightness and a wide color gamut. This heterogeneous integration technology using conventional LED materials shows the feasibility of a cost-effective approach for reliable high-performance full-color LED micro-displays in virtual reality (VR) and augmented reality (AR) devices.


  • Top Cited Papers
    Open Access

    848 ppi high-brightness active-matrix micro-LED micro-display using GaN-on-Si epi-wafers towards mass production

    by Longheng Qi, Xu Zhang, Wing Cheung Chong, Peian Li, Kei May Lau

    In this paper, fabrication processes of a 0.55-inch 400 × 240 high-brightness active-matrix micro-light-emitting diode (LED) display using GaN-on-Si epi-wafers are described. The micro-LED array, featuring a pixel size of 20 µm × 20 µm and a pixel density of 848 pixels per inch (ppi), was fabricated and integrated with a custom-designed CMOS driver through Au-Sn flip-chip bonding. Si growth substrate was removed using a crack-free wet etching method. Four-bit grayscale images and videos are clearly rendered. Optical crosstalk is discussed and can be mitigated through micro-LED array design and process modification. This high-performance, high-resolution micro-LED display demonstration provides a promising and cost-effective solution towards mass production of micro-displays for VR/AR applications.


  • Monolithic full‐color microdisplay using patterned quantum dot photoresist on dual‐wavelength LED epilayers

    by Peian Li, Xu Zhang, Yangfeng Li, Longheng Qi, Chak Wah Tang, Kei May Lau

    A passive‐matrix monolithic full‐color InGaN light emitting diode (LED) microdisplay with 40 × 40 full‐color pixels is demonstrated. Each full‐color pixel consists of red, green, and blue (RGB) subpixels that have a pitch size of 40 μm × 120 μm. The full‐color microdisplay is monolithically fabricated on blue/green dual‐wavelength LED epilayers, using red quantum dot photoresist as a color converter. Pure RGB emission and a wide color gamut are achieved, as shown by electroluminescence spectra. Full‐color patterns with controllable grayscale and color mixing can be clearly rendered driven by a full‐color microdisplay controller, indicating tremendous potential of this novel approach for full‐color LED microdisplays in the future.


  • Active matrix monolithic micro‐LED full‐color micro‐display

    by Xu Zhang, Longheng Qi, Wing Cheung Chong, Peian Li, Chak Wah Tang, Kei May Lau

    An active matrix monolithic micro‐LED full‐color micro‐display with a pixel density of 317 ppi is demonstrated. Starting from large‐scale and low‐cost GaN‐on‐Si epilayers, monolithic 64 × 36 blue micro‐LED arrays are fabricated and further transformed to full‐color micro‐displays by applying a photo‐patternable color conversion layer. This full‐color fabrication scheme shows feasible manufacturability, suggesting a potential for volume production of micro‐LED full‐color micro‐display.