Lingyun Hao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lingyun Hao has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Qing Lin
School of Materials Engineering, Jinling Institute of Technology, Nanjing 211169, China
3 shared publications - Wei Wang
School of Materials Engineering, Jinling Institute of Technology, Nanjing, China
3 shared publications - Xiaojuan Zhang
School of Material Engineering, Jinling Institute of Technology, Nanjing, China
3 shared publications Guowei Zhi
School of Materials Engineering, Jinling Institute of Technology, Nanjing, China
2 shared publicationsLu Yang
School of Materials Engineering, Jinling Institute of Technology, Nanjing, China
2 shared publications- Ruilong Sheng
CQM-Centro de Quimica da Madeira, Universidade da Madeira, Campus da Penteada, 9020-105 Funchal, Madeira, Portugal
2 shared publications
Latest Publications
- Open Access
- 10 November 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 1060467
W18O49@EP nanoparticles improve the anti-tumor effect of radiotherapy and photodynamic therapy by avoiding the limitation of hypoxia
Insufficient oxygen supply at the tumor site and hypoxia caused during tumor treatment lead to a poor therapeutic effect and poor prognosis. Therefore, effectively overcoming the problem of hypoxia in tumors and avoiding hypoxia that compromises the efficacy of the treatment could improve the anti-tumor therapeutic effect. Thus, this study reports the ability of W18O49@EP nanoparticles to release reactive oxygen species (ROS) during the combined tumor radiotherapy (RT) and photodynamic therapy (PDT). The release of ROS by the nanoparticles during near infrared light (NIR) irradiation was demonstrated by in vitro and in vivo experiments, realizing an effective PDT without inducing hypoxia. Indeed, the ROS did not derive from the oxygen in the tumor microenvironment but they were released by the nanoparticles. Thus, ROS could improve the therapeutic effect of RT avoiding the problem of hypoxia after RT. Hence, W18O49@EP nanoparticles greatly improved the anti-tumor effect due to their effectiveness despite the insufficient oxygen supply and hypoxia caused by traditional RT and PDT.
- 10 November 2022
- Published by Frontiers Media SA in Frontiers in Bioengineering and Biotechnology
- Vol. 10, 1060467
Open AccessW18O49@EP nanoparticles improve the anti-tumor effect of radiotherapy and photodynamic therapy by avoiding the limitation of hypoxia
Insufficient oxygen supply at the tumor site and hypoxia caused during tumor treatment lead to a poor therapeutic effect and poor prognosis. Therefore, effectively overcoming the problem of hypoxia in tumors and avoiding hypoxia that compromises the efficacy of the treatment could improve the anti-tumor therapeutic effect. Thus, this study reports the ability of W18O49@EP nanoparticles to release reactive oxygen species (ROS) during the combined tumor radiotherapy (RT) and photodynamic therapy (PDT). The release of ROS by the nanoparticles during near infrared light (NIR) irradiation was demonstrated by in vitro and in vivo experiments, realizing an effective PDT without inducing hypoxia. Indeed, the ROS did not derive from the oxygen in the tumor microenvironment but they were released by the nanoparticles. Thus, ROS could improve the therapeutic effect of RT avoiding the problem of hypoxia after RT. Hence, W18O49@EP nanoparticles greatly improved the anti-tumor effect due to their effectiveness despite the insufficient oxygen supply and hypoxia caused by traditional RT and PDT.
- Open Access
Charge-Convertible and Reduction-Sensitive Cholesterol-Containing Amphiphilic Copolymers for Improved Doxorubicin Delivery
For achieving successful chemotherapy against cancer, designing biocompatible drug delivery systems (DDSs) with long circulation times, high cellular endocytosis efficiency, and targeted drug release is of upmost importance. Herein, a well-defined PEG-b-P(MASSChol-co-MANBoc) block copolymer bearing redox-sensitive cholesteryl-side group was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization (with non-redox PEG-b-P(MACCChol-co-MAN-DCA) as the reference), and 1,2-dicarboxylic-cyclohexene acid (DCA) was then grafted onto the hydrophobic block to endow it with charge-convertible characteristics under a tumor microenvironment. The amphiphilic copolymer could be assembled into polymeric spherical micelles (SSMCs) with polyethylene glycol (PEG) as the corona/shell, and anti-cancer drug doxorubicin (DOX) was successfully encapsulated into the micellar core via strong hydrophobic and electrostatic interactions. This nanocarrier showed high stability in the physiological environment and demonstrated “smart” surface charge conversion from negative to positive in the slightly acidic environment of tumor tissues (pH 6.5~6.8), as determined by dynamic light scattering (DLS). Moreover, the cleavage of a disulfide bond linking the cholesterol grafts under an intracellular redox environment (10 mM GSH) resulted in micellar dissociation and accelerated drug release, with the non-redox-responsive micelles (CCMCs) as the control. Additionally, a cellular endocytosis and tumor proliferation inhibition study against MCF-7 tumor cells demonstrated the enhanced endocytosis and tumor cell inhibitory efficiency of dual-responsive SSMCs/DOX nanomedicines, revealing potentials as multifunctional nanoplatforms for effective oncology treatment.
Open AccessCharge-Convertible and Reduction-Sensitive Cholesterol-Containing Amphiphilic Copolymers for Improved Doxorubicin Delivery
For achieving successful chemotherapy against cancer, designing biocompatible drug delivery systems (DDSs) with long circulation times, high cellular endocytosis efficiency, and targeted drug release is of upmost importance. Herein, a well-defined PEG-b-P(MASSChol-co-MANBoc) block copolymer bearing redox-sensitive cholesteryl-side group was prepared via reversible addition-fragmentation chain transfer (RAFT) polymerization (with non-redox PEG-b-P(MACCChol-co-MAN-DCA) as the reference), and 1,2-dicarboxylic-cyclohexene acid (DCA) was then grafted onto the hydrophobic block to endow it with charge-convertible characteristics under a tumor microenvironment. The amphiphilic copolymer could be assembled into polymeric spherical micelles (SSMCs) with polyethylene glycol (PEG) as the corona/shell, and anti-cancer drug doxorubicin (DOX) was successfully encapsulated into the micellar core via strong hydrophobic and electrostatic interactions. This nanocarrier showed high stability in the physiological environment and demonstrated “smart” surface charge conversion from negative to positive in the slightly acidic environment of tumor tissues (pH 6.5~6.8), as determined by dynamic light scattering (DLS). Moreover, the cleavage of a disulfide bond linking the cholesterol grafts under an intracellular redox environment (10 mM GSH) resulted in micellar dissociation and accelerated drug release, with the non-redox-responsive micelles (CCMCs) as the control. Additionally, a cellular endocytosis and tumor proliferation inhibition study against MCF-7 tumor cells demonstrated the enhanced endocytosis and tumor cell inhibitory efficiency of dual-responsive SSMCs/DOX nanomedicines, revealing potentials as multifunctional nanoplatforms for effective oncology treatment.
- Open Access
Recent Advances in Zinc Hydroxystannate-Based Flame Retardant Polymer Blends
During the combustion of polymeric materials, plenty of heat, smoke, and toxic gases are produced that may cause serious harm to human health. Although the flame retardants such as halogen- and phosphorus-containing compounds can inhibit combustion, they cannot effectively reduce the release of toxic fumes. Zinc hydroxystannate (ZHS, ZnSn(OH)6) is an environmentally friendly flame retardant that has attracted extensive interest because of its high efficiency, safety, and smoke suppression properties. However, using ZHS itself may not contribute to the optimal flame retardant effect, which is commonly combined with other flame retardants to achieve more significant efficiency. Few articles systematically review the recent development of ZHS in the fire safety field. This review aims to deliver an insight towards further direction and advancement of ZHS in flame retardant and smoke suppression for multiple polymer blends. In addition, the fire retarded and smoke suppression mechanism of ZHS will be demonstrated and discussed in depth.
Open AccessRecent Advances in Zinc Hydroxystannate-Based Flame Retardant Polymer Blends
During the combustion of polymeric materials, plenty of heat, smoke, and toxic gases are produced that may cause serious harm to human health. Although the flame retardants such as halogen- and phosphorus-containing compounds can inhibit combustion, they cannot effectively reduce the release of toxic fumes. Zinc hydroxystannate (ZHS, ZnSn(OH)6) is an environmentally friendly flame retardant that has attracted extensive interest because of its high efficiency, safety, and smoke suppression properties. However, using ZHS itself may not contribute to the optimal flame retardant effect, which is commonly combined with other flame retardants to achieve more significant efficiency. Few articles systematically review the recent development of ZHS in the fire safety field. This review aims to deliver an insight towards further direction and advancement of ZHS in flame retardant and smoke suppression for multiple polymer blends. In addition, the fire retarded and smoke suppression mechanism of ZHS will be demonstrated and discussed in depth.
- 7 April 2022
- Published by Springer Nature in Ionics
- Vol. 28 (6) , 2865-2873
A method for improving performance of CuSbS2 anode materials by adjusting Cu/Sb ratio
- 7 April 2022
- Published by Springer Nature in Ionics
- Vol. 28 (6) , 2865-2873
A method for improving performance of CuSbS2 anode materials by adjusting Cu/Sb ratio
- 10 December 2021
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (3) , 1335-1341
Visible-light-driven hydrogen evolution from waste toner powder activated by Ni species
With the dramatic increase in the application of modern office equipment, such as laser printers and photocopiers, large amounts of waste toner powder are used and discarded, ending up in landfills around the world. As waste toner powder contains hazardous compounds that can seriously endanger both the environment and human health, it is urgent to deal with waste toner powder and convert it into high value-added products. In this work, we report, for the first time, visible-light-driven hydrogen production with waste toner activated by cheap Ni species (waste toner@Ni-species) as the photocatalyst. The Ni species adhered to the waste toner through in situ photoreduction, without sophisticated equipment. It is found that the Ni species were composed of metallic Ni and oxidized Ni, which worked in synergy to remarkably enhance the photocatalytic activity of the waste toner. Activated by the Ni species, the hydrogen evolution rate of the waste toner was accelerated by up to 62 times, and the apparent quantum efficiencies (AQEs) of the waste toner were boosted by up to 64 times. In addition, the waste toner@Ni-species exhibited a higher charge separation efficiency, faster interfacial charge transfer rate and ∼200 mV lower barrier for proton reduction than those of the pristine waste toner. In addition to these merits, the waste toner@Ni-species could be separated conveniently from the aqueous system using magnetic attraction, as the saturation magnetization and residual magnetism of the waste toner were improved with the assembly of the Ni species. The approach shown here indicates a simple and promising way to deal with waste toner by converting it to a cost-effective photocatalyst for producing clean energy.
- 10 December 2021
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 24 (3) , 1335-1341
Visible-light-driven hydrogen evolution from waste toner powder activated by Ni species
With the dramatic increase in the application of modern office equipment, such as laser printers and photocopiers, large amounts of waste toner powder are used and discarded, ending up in landfills around the world. As waste toner powder contains hazardous compounds that can seriously endanger both the environment and human health, it is urgent to deal with waste toner powder and convert it into high value-added products. In this work, we report, for the first time, visible-light-driven hydrogen production with waste toner activated by cheap Ni species (waste toner@Ni-species) as the photocatalyst. The Ni species adhered to the waste toner through in situ photoreduction, without sophisticated equipment. It is found that the Ni species were composed of metallic Ni and oxidized Ni, which worked in synergy to remarkably enhance the photocatalytic activity of the waste toner. Activated by the Ni species, the hydrogen evolution rate of the waste toner was accelerated by up to 62 times, and the apparent quantum efficiencies (AQEs) of the waste toner were boosted by up to 64 times. In addition, the waste toner@Ni-species exhibited a higher charge separation efficiency, faster interfacial charge transfer rate and ∼200 mV lower barrier for proton reduction than those of the pristine waste toner. In addition to these merits, the waste toner@Ni-species could be separated conveniently from the aqueous system using magnetic attraction, as the saturation magnetization and residual magnetism of the waste toner were improved with the assembly of the Ni species. The approach shown here indicates a simple and promising way to deal with waste toner by converting it to a cost-effective photocatalyst for producing clean energy.
- Open Access
- 7 September 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (9) , 2328
Novel Contact Lenses Embedded with Drug-Loaded Zwitterionic Nanogels for Extended Ophthalmic Drug Delivery
Therapeutic ophthalmic contact lenses with prolonged drug release and improved bioavailability have been developed to circumvent tedious eye drop instillation. In this work, zwitterionic nanogels based on poly(sulfobetaine methacrylate) (PSBMA) were easily fabricated by one-step reflux-precipitation polymerization, with the advantages of being surfactant-free and morphology controlled. Then, the ophthalmic drug levofloxacin (LEV) was encapsulated into the nanogels. A set of contact lenses with varied nanogel-loading content was fabricated by the cast molding method, with the drug-loaded nanogels dispersed in pre-monomer solutions composed of 2-hydroxyethyl methacrylate (HEMA) and N-vinyl-2-pyrrolidone (NVP). The structure, surface morphology, water contact angle (WCA), equilibrium water content (EWC), transmittance, and mechanical properties of the contact lenses were subsequently investigated, and in vitro drug release and biocompatibility were further evaluated. As a result, the optimized contact lens with nanogel-loading content of 8 wt% could sustainably deliver LEV for ten days, with critical lens properties within the range of recommended values for commercial contact lenses. Moreover, cell viability assays revealed that the prepared contact lenses were cytocompatible, suggesting their significant potential as an alternative to traditional eye drops or ointment formulations for long-term oculopathy treatment.
- 7 September 2021
- Published by MDPI AG in Nanomaterials
- Vol. 11 (9) , 2328
Open AccessNovel Contact Lenses Embedded with Drug-Loaded Zwitterionic Nanogels for Extended Ophthalmic Drug Delivery
Therapeutic ophthalmic contact lenses with prolonged drug release and improved bioavailability have been developed to circumvent tedious eye drop instillation. In this work, zwitterionic nanogels based on poly(sulfobetaine methacrylate) (PSBMA) were easily fabricated by one-step reflux-precipitation polymerization, with the advantages of being surfactant-free and morphology controlled. Then, the ophthalmic drug levofloxacin (LEV) was encapsulated into the nanogels. A set of contact lenses with varied nanogel-loading content was fabricated by the cast molding method, with the drug-loaded nanogels dispersed in pre-monomer solutions composed of 2-hydroxyethyl methacrylate (HEMA) and N-vinyl-2-pyrrolidone (NVP). The structure, surface morphology, water contact angle (WCA), equilibrium water content (EWC), transmittance, and mechanical properties of the contact lenses were subsequently investigated, and in vitro drug release and biocompatibility were further evaluated. As a result, the optimized contact lens with nanogel-loading content of 8 wt% could sustainably deliver LEV for ten days, with critical lens properties within the range of recommended values for commercial contact lenses. Moreover, cell viability assays revealed that the prepared contact lenses were cytocompatible, suggesting their significant potential as an alternative to traditional eye drops or ointment formulations for long-term oculopathy treatment.
- 24 August 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (19) , 17036-17043
A novel CuSbS2–TiO2 nanoparticles synergy structure for photocatalysis
- 24 August 2020
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 31 (19) , 17036-17043
A novel CuSbS2–TiO2 nanoparticles synergy structure for photocatalysis
- 1 January 2019
- Published by Elsevier in Desalination and Water Treatment
- Vol. 138, 346-352
Synergistic effectiveness of eggshell membranes-supported zinc oxide materials on the removal of organic dyes from wastewater
- 1 January 2019
- Published by Elsevier in Desalination and Water Treatment
- Vol. 138, 346-352
Synergistic effectiveness of eggshell membranes-supported zinc oxide materials on the removal of organic dyes from wastewater
- 1 December 2016
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 64, 43-52
Functional hydrogel contact lens for drug delivery in the application of oculopathy therapy
- 1 December 2016
- Published by Elsevier in Journal of the Mechanical Behavior of Biomedical Materials
- Vol. 64, 43-52
Functional hydrogel contact lens for drug delivery in the application of oculopathy therapy