Yunxia Wang
Yunxia Wang has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Liheng Feng
School of Chemistry and Chemical Engineering Shanxi University Taiyuan P. R. China
17 shared publications Ruipeng Li
School of Chemistry and Chemical Engineering Shanxi University Taiyuan China
7 shared publicationsHaoping Wang
School of Chemistry and Chemical Engineering, Shanxi University, Taiyuan 030006, P. R. China
5 shared publicationsLixia Guo
School of Basic Medical Sciences, Shanxi Medical University, Taiyuan 030001, P. R. China
5 shared publicationsSirong Zhou
School of Chemistry and Chemical Engineering, Shanxi University, Taiyuan 030006, China
5 shared publicationsZhijun Wang
Department of Chemistry
4 shared publications
Latest Publications
- Open Access
- 25 May 2026
- Published by Wiley in Advanced Science
- Vol. 13 (47) , e22486
Light‐Activatable Nitric Oxide Release via Intramolecular Electron Transfer for Tumor Pyroptosis Induction
Developing long‐wavelength‐activated nitric oxide (NO) donors has attracted increasing attention for achieving precise photo‐controlled NO release with deep tissue penetration and minimal phototoxicity, yet this remains a major challenge. Herein, we report a deep‐red light‐triggered NO‐releasing molecule (DBTBT‐NO) via a novel photoexcitation‐mediated electron transfer process to induce abundant peroxynitrite generation. The DBTBT‐NO can be activated by deep‐red light to release NO, which is facilitated by photoinduced intramolecular charge separation. Meanwhile, superoxide anions generated during photolysis rapidly react with NO to produce massive peroxynitrite in mitochondria, which induces tumor cell pyroptosis at a low light dose of 15 J/cm 2 and a low concentration of 0.4 µ m . The robust pyroptosis triggered by DBTBT‐NO effectively inhibits tumor growth and metastasis in mice with excellent biosafety. This is the first report on boosting peroxynitrite generation through long‐wavelength photolysis of benzisothiadiazole‐based N ‐nitrosanilines via a distinct mechanism. This work provides a new approach to fabricate unimolecular peroxynitrite photoinitiators with high pyroptosis induction efficiency, facilitating simplified and improved photoimmunotherapy.
- 25 May 2026
- Published by Wiley in Advanced Science
- Vol. 13 (47) , e22486
Open AccessLight‐Activatable Nitric Oxide Release via Intramolecular Electron Transfer for Tumor Pyroptosis Induction
Developing long‐wavelength‐activated nitric oxide (NO) donors has attracted increasing attention for achieving precise photo‐controlled NO release with deep tissue penetration and minimal phototoxicity, yet this remains a major challenge. Herein, we report a deep‐red light‐triggered NO‐releasing molecule (DBTBT‐NO) via a novel photoexcitation‐mediated electron transfer process to induce abundant peroxynitrite generation. The DBTBT‐NO can be activated by deep‐red light to release NO, which is facilitated by photoinduced intramolecular charge separation. Meanwhile, superoxide anions generated during photolysis rapidly react with NO to produce massive peroxynitrite in mitochondria, which induces tumor cell pyroptosis at a low light dose of 15 J/cm 2 and a low concentration of 0.4 µ m . The robust pyroptosis triggered by DBTBT‐NO effectively inhibits tumor growth and metastasis in mice with excellent biosafety. This is the first report on boosting peroxynitrite generation through long‐wavelength photolysis of benzisothiadiazole‐based N ‐nitrosanilines via a distinct mechanism. This work provides a new approach to fabricate unimolecular peroxynitrite photoinitiators with high pyroptosis induction efficiency, facilitating simplified and improved photoimmunotherapy.
- 27 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 9 (6) , 2980-2989
NIR-Activated Bactericidal-Antioxidative Microneedles Based on Organic J-Aggregates to Accelerate Infected Wound Healing
It is imperative to provide timely and effective treatment for bacterially infected wounds to prevent progression to more severe pathological conditions. Herein, we report a near-infrared (NIR)-activated nanoassembly (BC@P) integrating dual functions of bactericidal activity and tissue repair. The nanoassembly is facilely fabricated via the self-assembly of organic photothermal molecules B(TIBC)2, natural antioxidant molecules curcumin, and biocompatible eight-arm polyethylene glycol (8-arm-PEG). B(TIBC)2 is rationally designed with an acceptor-donor-acceptor (A-D-A) structure and tailored photothermal activity; moreover, it undergoes assembly induced J-aggregation, leading to a red-shifted absorption tail extending into the NIR-II region. Consequently, BC@P exhibits broadened NIR absorption, favorable photothermal conversion efficiency (53.1%), efficient NIR-II emission, and robust antioxidative capacity. When integrated into a hyaluronic acid-based microneedle (MN) patch, BC@P efficiently penetrates the skin barrier to eradicate wound-resident bacteria, modulate the inflammatory response, and accelerate the healing of bacterial-infected wounds with excellent biosafety. This work not only presents a promising "kill-and-repair" platform for infected wound therapy but also provides a guiding paradigm for the design of J-aggregate scaffolds in biological NIR-II imaging applications.
- 27 February 2026
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 9 (6) , 2980-2989
NIR-Activated Bactericidal-Antioxidative Microneedles Based on Organic J-Aggregates to Accelerate Infected Wound Healing
It is imperative to provide timely and effective treatment for bacterially infected wounds to prevent progression to more severe pathological conditions. Herein, we report a near-infrared (NIR)-activated nanoassembly (BC@P) integrating dual functions of bactericidal activity and tissue repair. The nanoassembly is facilely fabricated via the self-assembly of organic photothermal molecules B(TIBC)2, natural antioxidant molecules curcumin, and biocompatible eight-arm polyethylene glycol (8-arm-PEG). B(TIBC)2 is rationally designed with an acceptor-donor-acceptor (A-D-A) structure and tailored photothermal activity; moreover, it undergoes assembly induced J-aggregation, leading to a red-shifted absorption tail extending into the NIR-II region. Consequently, BC@P exhibits broadened NIR absorption, favorable photothermal conversion efficiency (53.1%), efficient NIR-II emission, and robust antioxidative capacity. When integrated into a hyaluronic acid-based microneedle (MN) patch, BC@P efficiently penetrates the skin barrier to eradicate wound-resident bacteria, modulate the inflammatory response, and accelerate the healing of bacterial-infected wounds with excellent biosafety. This work not only presents a promising "kill-and-repair" platform for infected wound therapy but also provides a guiding paradigm for the design of J-aggregate scaffolds in biological NIR-II imaging applications.
- 14 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 12 (38) , 9675-9685
Customized A–D–A type molecule to construct a nitric oxide nanogenerator with enhanced antibacterial activity for infected wound healing
Bacterial infections pose an increasingly serious threat to global health due to the development of drug-resistant strains. Developing a method to efficiently kill bacteria and promote tissue repair is imperative to decrease the damage from bacterial infection, especially infected wounds. Herein, a biofriendly and light-controlled nitric oxide (NO) generator HFB with simultaneous bacterial killing and wound repair properties is reported based on a tailored light-responsive molecule F(EIBC)2. HFB demonstrates an appropriate photothermal conversion efficiency of 33.4% and type I reactive oxygen species (˙OH and H2O2) generation capability to simultaneously trigger NO generation and potently kill bacteria. Furthermore, HFB can effectively eradicate mature bacterial biofilms with the aid of favorable permeability of NO. Additionally, HFB effectively eradicates Staphylococcus aureus in infected wounds of living mice and accelerates healing via NO-induced angiogenesis and collagen deposition. Owing to the encapsulated human serum albumin (HSA), heavy metal-free feature, and synergistic killing mechanism, HFB exhibits good biosafety to surrounding tissue and major organs. This work provides a novel dual-functional photo-responsive molecule and a potential light-controlled release platform for the treatment of bacterial infections.
- 14 August 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 12 (38) , 9675-9685
Customized A–D–A type molecule to construct a nitric oxide nanogenerator with enhanced antibacterial activity for infected wound healing
Bacterial infections pose an increasingly serious threat to global health due to the development of drug-resistant strains. Developing a method to efficiently kill bacteria and promote tissue repair is imperative to decrease the damage from bacterial infection, especially infected wounds. Herein, a biofriendly and light-controlled nitric oxide (NO) generator HFB with simultaneous bacterial killing and wound repair properties is reported based on a tailored light-responsive molecule F(EIBC)2. HFB demonstrates an appropriate photothermal conversion efficiency of 33.4% and type I reactive oxygen species (˙OH and H2O2) generation capability to simultaneously trigger NO generation and potently kill bacteria. Furthermore, HFB can effectively eradicate mature bacterial biofilms with the aid of favorable permeability of NO. Additionally, HFB effectively eradicates Staphylococcus aureus in infected wounds of living mice and accelerates healing via NO-induced angiogenesis and collagen deposition. Owing to the encapsulated human serum albumin (HSA), heavy metal-free feature, and synergistic killing mechanism, HFB exhibits good biosafety to surrounding tissue and major organs. This work provides a novel dual-functional photo-responsive molecule and a potential light-controlled release platform for the treatment of bacterial infections.
- 10 July 2024
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 12 (17) , 4440-4451
Tuning molecular assembly behavior to amplify the sonodynamic activity of porphyrins for efficient antibacterial therapy
A new strategy to enhance molecular sonosensitivity is disclosed via tuning molecular assembly behavior, achieving highly efficient sonodynamic therapy of septic arthritis in a rat model.
- 10 July 2024
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 12 (17) , 4440-4451
Tuning molecular assembly behavior to amplify the sonodynamic activity of porphyrins for efficient antibacterial therapy
A new strategy to enhance molecular sonosensitivity is disclosed via tuning molecular assembly behavior, achieving highly efficient sonodynamic therapy of septic arthritis in a rat model.
- 4 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (41) , 46340-46350
Bioactive AIEgens Tailored for Specific and Sensitive Theranostics of Gram-Positive Bacterial Infection
Diseases caused by bacterial infections are increasingly threatening human health. As a major part of the microbial family, Gram-positive bacteria induce severe infections in hospitals and communities. Therefore, developing antibacterial materials that can recognize bacteria and specifically kill them is significant to cope with fatal bacterial infection. To this end, we designed and prepared a series of positively charged photosensitizers with an aggregation-induced emission feature and a type I reactive oxygen species (ROS) generation ability. Based on a molecular engineering strategy, the PS abbreviated to MTTTPy that owns a superior ROS generation ability and red emission in aggregation is obtained by adjusting bridging groups. Due to the unique molecular structure, MTTTPy can sensitively and specifically recognize and light up Gram-positive bacteria through electrostatic adsorption and void permeability. In addition, it can kill 95% of the recognized bacteria at a low concentration of 0.5 μM by generating oxygen-independent ROS under white light irradiation. Both in vitro and in vivo studies verify the sensitive and specific recognition and killing effect of MTTTPy toward Gram-positive bacteria. This work provides superior material-integrated diagnosis and treatment for Gram-positive bacteria-caused infectious diseases and shows potential for addressing bacterial resistance.
- 4 October 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (41) , 46340-46350
Bioactive AIEgens Tailored for Specific and Sensitive Theranostics of Gram-Positive Bacterial Infection
Diseases caused by bacterial infections are increasingly threatening human health. As a major part of the microbial family, Gram-positive bacteria induce severe infections in hospitals and communities. Therefore, developing antibacterial materials that can recognize bacteria and specifically kill them is significant to cope with fatal bacterial infection. To this end, we designed and prepared a series of positively charged photosensitizers with an aggregation-induced emission feature and a type I reactive oxygen species (ROS) generation ability. Based on a molecular engineering strategy, the PS abbreviated to MTTTPy that owns a superior ROS generation ability and red emission in aggregation is obtained by adjusting bridging groups. Due to the unique molecular structure, MTTTPy can sensitively and specifically recognize and light up Gram-positive bacteria through electrostatic adsorption and void permeability. In addition, it can kill 95% of the recognized bacteria at a low concentration of 0.5 μM by generating oxygen-independent ROS under white light irradiation. Both in vitro and in vivo studies verify the sensitive and specific recognition and killing effect of MTTTPy toward Gram-positive bacteria. This work provides superior material-integrated diagnosis and treatment for Gram-positive bacteria-caused infectious diseases and shows potential for addressing bacterial resistance.
- 1 September 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (77) , 10853-10856
Self-assemblies with cascade effect to boost antitumor systemic immunotherapy
Bio-organic hybrid self-assemblies based on amino acids, conjugated polymers, Fe3+ and enzymes are fabricated with tumor environment-responsive and light-triggered NO release properties. By sequential energy consumption, NO attack and immune activation, FFPG shows boosted antitumor activity toward both primary and distant tumors. The three-level cascade strategy (starvation/NO/immunotherapy) adopted in this work offers a pathway to address the dilemma of low cure rate of malignant tumors.
- 1 September 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (77) , 10853-10856
Self-assemblies with cascade effect to boost antitumor systemic immunotherapy
Bio-organic hybrid self-assemblies based on amino acids, conjugated polymers, Fe3+ and enzymes are fabricated with tumor environment-responsive and light-triggered NO release properties. By sequential energy consumption, NO attack and immune activation, FFPG shows boosted antitumor activity toward both primary and distant tumors. The three-level cascade strategy (starvation/NO/immunotherapy) adopted in this work offers a pathway to address the dilemma of low cure rate of malignant tumors.
- 29 August 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 10 (39) , 8003-8012
A tailored and red-emissive type I photosensitizer to potentiate photodynamic immunotherapy
A tailored type I PS for imaging-guided photodynamic immunotherapy is developed. The work enhances the killing effect of PDT against hypoxic solid tumors and boosts the T-cell immune response to residual and metastasis tumor cells.
- 29 August 2022
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 10 (39) , 8003-8012
A tailored and red-emissive type I photosensitizer to potentiate photodynamic immunotherapy
A tailored type I PS for imaging-guided photodynamic immunotherapy is developed. The work enhances the killing effect of PDT against hypoxic solid tumors and boosts the T-cell immune response to residual and metastasis tumor cells.
- 24 August 2022
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 10 (20) , 6003-6012
Injectable thermosensitive hydrogel to enhance the photothermal ablation and systemic immunotherapy of breast tumors
As the high-frequency tumor in women around the world, breast cancer has high mortality due to metastasis tumors making it difficult to cure. Herein, we report a near-infrared (NIR) activated bio-multifunctional thermosensitive hydrogel (denoted as AMDR) with powerful cell killing and immunogenicity amplifying ability. Based on the molecular engineering strategy, a photothermal agent (M-4) with 52.4% conversion efficiency was synthesized. Accordingly, the designed injectable thermosensitive hydrogel AMDR is simply fabricated by the employment of the M-4 photothermal agent, doxorubicin hydrochloride (DOX) as the antitumor drug, and imiquimod (R837) as the immunologic adjuvant by self-assembly. Under NIR irradiation, the AMDR hydrogel can generate local mild heat to release DOX for synergistic killing of tumor cells with little damage to normal cells. The immunogenic cell death induced by potent in situ killing combined with heat-released R837 can trigger robust immune response to inhibit and kill metastasis tumors. The developed AMDR hydrogel is successfully applied in the treatment of primary tumors and inhibition of distal tumors of tumor-bearing mice. The study provides a novel strategy and platform for complete treatment of breast cancer and also offers ideas for designing high-efficiency photothermal agents.
- 24 August 2022
- Published by Royal Society of Chemistry (RSC) in Biomaterials Science
- Vol. 10 (20) , 6003-6012
Injectable thermosensitive hydrogel to enhance the photothermal ablation and systemic immunotherapy of breast tumors
As the high-frequency tumor in women around the world, breast cancer has high mortality due to metastasis tumors making it difficult to cure. Herein, we report a near-infrared (NIR) activated bio-multifunctional thermosensitive hydrogel (denoted as AMDR) with powerful cell killing and immunogenicity amplifying ability. Based on the molecular engineering strategy, a photothermal agent (M-4) with 52.4% conversion efficiency was synthesized. Accordingly, the designed injectable thermosensitive hydrogel AMDR is simply fabricated by the employment of the M-4 photothermal agent, doxorubicin hydrochloride (DOX) as the antitumor drug, and imiquimod (R837) as the immunologic adjuvant by self-assembly. Under NIR irradiation, the AMDR hydrogel can generate local mild heat to release DOX for synergistic killing of tumor cells with little damage to normal cells. The immunogenic cell death induced by potent in situ killing combined with heat-released R837 can trigger robust immune response to inhibit and kill metastasis tumors. The developed AMDR hydrogel is successfully applied in the treatment of primary tumors and inhibition of distal tumors of tumor-bearing mice. The study provides a novel strategy and platform for complete treatment of breast cancer and also offers ideas for designing high-efficiency photothermal agents.
- 17 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (12) , 14087-14096
Multifunctional Self-Assembly with NIR Light-Activated Cascade Effect for Improving Local Treatment on Solid Tumors
Incomplete local treatment of solid tumors is the main cause of tumor difficult to cure, and easily leads to tumor metastasis and recurrence. The dense external matrix and hypoxic microenvironment of solid tumors severely restrict the therapy efficacy of local tumors. Enhancing the infiltration ability of agents to tumor tissues and adapting the therapy mode favored to hypoxic microenvironments are beneficial to improve the cure rate of tumors. In this work, we designed and developed a self-assembled biomaterial with a cascade effect triggered by near-infrared light. The self-assembly was combined of biotin, phase change material (PNIPAM), photochemical agent (ATT-2), and alkyl radical generator (AIPH). In the assembly, biotin acted as a targeted group. ATT-2 was used to provide heat to synergistically induce the phase change and decompose alkyl radicals. The superficial and deep tumors were ablated by heat and alkyl radicals with white light irradiation of the assembly, respectively. The assay in vivo showed that the self-assembly could effectively eliminate local lesions of solid tumors. This work provides new insights for improving the cure rate of tumors, which not only develops biomaterials adapted to the tumor microenvironment, but also proposes new therapies for complete elimination of solid tumors.
- 17 March 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (12) , 14087-14096
Multifunctional Self-Assembly with NIR Light-Activated Cascade Effect for Improving Local Treatment on Solid Tumors
Incomplete local treatment of solid tumors is the main cause of tumor difficult to cure, and easily leads to tumor metastasis and recurrence. The dense external matrix and hypoxic microenvironment of solid tumors severely restrict the therapy efficacy of local tumors. Enhancing the infiltration ability of agents to tumor tissues and adapting the therapy mode favored to hypoxic microenvironments are beneficial to improve the cure rate of tumors. In this work, we designed and developed a self-assembled biomaterial with a cascade effect triggered by near-infrared light. The self-assembly was combined of biotin, phase change material (PNIPAM), photochemical agent (ATT-2), and alkyl radical generator (AIPH). In the assembly, biotin acted as a targeted group. ATT-2 was used to provide heat to synergistically induce the phase change and decompose alkyl radicals. The superficial and deep tumors were ablated by heat and alkyl radicals with white light irradiation of the assembly, respectively. The assay in vivo showed that the self-assembly could effectively eliminate local lesions of solid tumors. This work provides new insights for improving the cure rate of tumors, which not only develops biomaterials adapted to the tumor microenvironment, but also proposes new therapies for complete elimination of solid tumors.