Isakulov Abilkhair Bayzakovich
Research Subjects
Isakulov Abilkhair Bayzakovich has a total of 9 co-authors. Here are the top co-authors by number of shared publications:
- Baizak Isakulov
Department of Design and Construction, Baishev University Institution, Aktobe 030000, Kazakhstan
4 shared publications - Marina Akulova
Ivanovo State Polytechnic University
4 shared publications - B.B. Kul’sHarov
Baishev University
3 shared publications - Alla G. Sokolova
Национальный исследовательский Московский государственный строительный университет
2 shared publications - Yu. A. Sokolova
Moscow State Construction University
2 shared publications Alla G. Sokolova
Moscow State University of Civil Engineering
1 shared publication
Latest Publications
- 15 July 2022
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 334, 195-201
The Study of the Impact of Iron and Sulfur Containing Additives on the Strength Properties of Sulfur Containing Binders
In the present paper, there were considered the issues of developing optimal compositions and the study of the impact of sulfur addition on strength properties of sulfur containing binders for building materials. The purpose of the research is the development of scientific principles of physical and chemical mechanics for detoxification of wastes produced by oil-processing and metallurgical industries while obtaining sulfur containing binders with enhanced adhesive and strength properties altered by the directed mechanochemical effects. While carrying out the scientific research, there have been used standard measurement methods and the methods of analysis of physical and mechanical properties of sulfur containing binding compositions obtained by the contemporary methods of analysis and testing equipment. As the result of the research, new binding substances with improved adhesive properties have been obtained and sulfur containing structural materials with the complex of enhanced physical and mechanical properties have been developed on their basis.
- 15 July 2022
- Published by Trans Tech Publications, Ltd. in Solid State Phenomena
- Vol. 334, 195-201
The Study of the Impact of Iron and Sulfur Containing Additives on the Strength Properties of Sulfur Containing Binders
In the present paper, there were considered the issues of developing optimal compositions and the study of the impact of sulfur addition on strength properties of sulfur containing binders for building materials. The purpose of the research is the development of scientific principles of physical and chemical mechanics for detoxification of wastes produced by oil-processing and metallurgical industries while obtaining sulfur containing binders with enhanced adhesive and strength properties altered by the directed mechanochemical effects. While carrying out the scientific research, there have been used standard measurement methods and the methods of analysis of physical and mechanical properties of sulfur containing binding compositions obtained by the contemporary methods of analysis and testing equipment. As the result of the research, new binding substances with improved adhesive properties have been obtained and sulfur containing structural materials with the complex of enhanced physical and mechanical properties have been developed on their basis.
- 12 April 2021
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 2 (446) , 86-91
THE STUDY OF THE PROPERTIES AND STRUCTURE OF CEMENT BINDING COMPOSITION ON ELECTROLYTE ACQUEOUS SOLUTIONS ACTIVATED BY MECHANOMAGNETIC METHOD
In the present paper, the issues of studying the influence of complex activation of grouting fluid on the structure and properties of the hardened cement paste and concrete are considered. The problem is relevant for manufacturing of building materials. In the paper, there was used the method of applying in the concrete mix composition of the elementary chemical substances undergone special physical treatment by means of mechanomagnetic activation. For more profound study of the structure formation processes in the hardened cement paste, the method of differential thermo gravimetric analysis has been used. As the research results have shown, the concrete samples on the activated electrolyte solutions are characterized by improved strength. In addition, on the base of differential thermo gravimetric analysis, it was proven that in the studied samples of the hardened cement paste on the electrolyte solutions activated by the method of mechanomagnetic treatment, the less calcium hydroxide and the more hydrated calcium silicate with amorphous and fine crystalline is formed. The obtained results for cement composites could be applied when manufacturing effective binder for concretes and mortars in the production of building materials and structures.
- 12 April 2021
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 2 (446) , 86-91
THE STUDY OF THE PROPERTIES AND STRUCTURE OF CEMENT BINDING COMPOSITION ON ELECTROLYTE ACQUEOUS SOLUTIONS ACTIVATED BY MECHANOMAGNETIC METHOD
In the present paper, the issues of studying the influence of complex activation of grouting fluid on the structure and properties of the hardened cement paste and concrete are considered. The problem is relevant for manufacturing of building materials. In the paper, there was used the method of applying in the concrete mix composition of the elementary chemical substances undergone special physical treatment by means of mechanomagnetic activation. For more profound study of the structure formation processes in the hardened cement paste, the method of differential thermo gravimetric analysis has been used. As the research results have shown, the concrete samples on the activated electrolyte solutions are characterized by improved strength. In addition, on the base of differential thermo gravimetric analysis, it was proven that in the studied samples of the hardened cement paste on the electrolyte solutions activated by the method of mechanomagnetic treatment, the less calcium hydroxide and the more hydrated calcium silicate with amorphous and fine crystalline is formed. The obtained results for cement composites could be applied when manufacturing effective binder for concretes and mortars in the production of building materials and structures.
- 15 December 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 6 (444) , 65-72
DETOXICATION OF BY-PRODUCTS OF OIL AND GAS INDUSTRY ACCOMPANIIED BY OBTAINING IRON AND SULFUR-CONTAINING BINDERS FOR STRUCTURAL BUILDING MATERIALS
In this paper, the authors considered the issues related to reducing negative impact of large-tonnage toxic industrial wastes on environment by means of their detoxication and application as effective binders for building materials. For implementation of scientific researches, the standard methods of analysis of physical and mechanical properties have been used for the stone based on iron and sulfur containing binders; the contemporary methods of differential and thermal, X-ray diffraction analysis, microscopic analysis and testing apparatuses have been used. While carrying out experimental research, the authors have realized a scientific hypothesis stating that for increasing the effect of additional activation for eact particles of iron- and sulfur containing additives, their co-milling has been applied. As the result, there took place mutual neutralization and detoxication of solid industrial by-products with opposite chemical properties. In the course of experimental work aimed at preliminary determination of composition and activation of sulfur-contating additives, wet grinding was done on the pebble mill by applying abrasive and impact forces. In the course of combined action of mechano-chemical activation of industrial by-products, in the presence of water, accompanied by sulfur-containing raw mixtures for manufacturing of building materials, there was used the method of mutual neutralizion of chemically hazardous substances forming a part of industrial wastes. These methods enable to reduce the consumption of a binder due to its partial replacement by toxic by-products of oil and gas industry and metallurgy. The characteristics and properties of the specimens of iron and sulfurcontaining binder have been studied at the age of 7, 14 and 28 days of air hardening. The specimens were exposed to thermal and steam curing. It was stated that air hardened iron and sulfur-containing binders at the age of 14 days have reached the ultimate compressive strength of 62.0 MPa, at the age of 28 days – 66.5 MPa, correspondingly. The same composition exposed to steam curing at the age of 28 days has compression strength of 74.5 MPa that attests to the fact that steam curing has a positive impact on gain in strength of iron and sulfur-containing binder. The obtained research results could be apllied as an effective substance for manufacturing mortars and concrets in construction industry.
- 15 December 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in SERIES CHEMISTRY AND TECHNOLOGY
- Vol. 6 (444) , 65-72
DETOXICATION OF BY-PRODUCTS OF OIL AND GAS INDUSTRY ACCOMPANIIED BY OBTAINING IRON AND SULFUR-CONTAINING BINDERS FOR STRUCTURAL BUILDING MATERIALS
In this paper, the authors considered the issues related to reducing negative impact of large-tonnage toxic industrial wastes on environment by means of their detoxication and application as effective binders for building materials. For implementation of scientific researches, the standard methods of analysis of physical and mechanical properties have been used for the stone based on iron and sulfur containing binders; the contemporary methods of differential and thermal, X-ray diffraction analysis, microscopic analysis and testing apparatuses have been used. While carrying out experimental research, the authors have realized a scientific hypothesis stating that for increasing the effect of additional activation for eact particles of iron- and sulfur containing additives, their co-milling has been applied. As the result, there took place mutual neutralization and detoxication of solid industrial by-products with opposite chemical properties. In the course of experimental work aimed at preliminary determination of composition and activation of sulfur-contating additives, wet grinding was done on the pebble mill by applying abrasive and impact forces. In the course of combined action of mechano-chemical activation of industrial by-products, in the presence of water, accompanied by sulfur-containing raw mixtures for manufacturing of building materials, there was used the method of mutual neutralizion of chemically hazardous substances forming a part of industrial wastes. These methods enable to reduce the consumption of a binder due to its partial replacement by toxic by-products of oil and gas industry and metallurgy. The characteristics and properties of the specimens of iron and sulfurcontaining binder have been studied at the age of 7, 14 and 28 days of air hardening. The specimens were exposed to thermal and steam curing. It was stated that air hardened iron and sulfur-containing binders at the age of 14 days have reached the ultimate compressive strength of 62.0 MPa, at the age of 28 days – 66.5 MPa, correspondingly. The same composition exposed to steam curing at the age of 28 days has compression strength of 74.5 MPa that attests to the fact that steam curing has a positive impact on gain in strength of iron and sulfur-containing binder. The obtained research results could be apllied as an effective substance for manufacturing mortars and concrets in construction industry.
- 15 August 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in Series of Geology and Technical Sciences
- Vol. 4 (442) , 28-34
FORMATION OF STRENGTH AND PHASES OF SEQUENCE OF DESTRUCTION OF ARBOLITE COMPOSITES AT VARIOUS LONG LOADS
- 15 August 2020
- Published by National Academy of Sciences of the Republic of Kazakshtan in Series of Geology and Technical Sciences
- Vol. 4 (442) , 28-34
FORMATION OF STRENGTH AND PHASES OF SEQUENCE OF DESTRUCTION OF ARBOLITE COMPOSITES AT VARIOUS LONG LOADS