YDYuri Denisov

Yuri Denisov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yuri Denisov has a total of 31 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Influence of battery and propeller group parameters on the UAV flight duration

    by Sergey Yermolov, Yuri Denisov

    The use of unmanned aerial vehicles (UAVs) is becoming increasingly widespread in many areas of human life every year. Not only military, but also civilian use of UAVs in various fields of science, industry, forestry, agronomy, cartography, ecology, and space research is hard to overestimate. For this reason, the use and development of UAVs in various fields remains extremely promising in the near future. Compared to manned vehicles, UAVs have the following advantages: no crew and no need for life support systems, large airfields; lower cost and low expenses for their development, production and operation; better weight and dimensions; high reliability and maneuverability; a wide range of specialized equipment for placement on board. UAVs are being introduced into all spheres of human life, even those where UAVs have no manned alternative. Some models of multicopters are already being used to deliver goods and extinguish fires. UAVs of new designs continue to be developed.In all areas of UAV application, the task of increasing autonomy remains relevant and important. The duration of con-tinuous operation and flight range directly affect the capabilities of the UAV, its ability to perform tasks and efficiency.UAV power consumption depends on the weight of the payload, weather conditions and drone speed. Energy consumption is a critical criterion for a drone to perform its missions and needs to be further studied. Many studies have been conducted to increase flight time by improving energy efficiency or reducing the energy consumed by the drone.Study the influence of battery parameters (capacity and weight) and propeller group (number of propellers and their diameter) on the maximum possible flight duration of UAVs of different masses.The main factors affecting the maximum flight duration of a UAV are considered. A model for calculating the power consumed by the device in the hover mode is presented. The maximum flight duration of a UAV is calculated depending on the battery capacity and weight, the number of propellers, and the diameter of the propellers for vehicles of different masses.It is shown that there is no point in increasing the battery capacity indefinitely, and there is an optimum point that depends on the ratio of the battery mass to the mass of the vehicle. It is also shown that increasing the diameter of the propellers significantly increases the flight time, while increasing their number is not as effective.

  • Open Access

    Ways to increase the activity of multi-rotor UAVs in agriculture

    by Yurii Denisov, Serhii Yermolov

    Rapid growth of mechanization of all agricultural work cannot completely reduce human participation, so agricultural automation is extremely important. In terms of automation, this study highlights crucial role of UAVs in accurate and intelligent agriculture. In the article, possibilities of using unmanned aerial vehicles (UAVs) in agriculture are conisred. Advantages of using UAVs in comparison with traditional methods are described, as well as prospects for the development of this direction in the agricultural sector are highlighted. Of course, using of unmanned aerial vehicles is widespread in many countries of the world, and results of research in this direction, despite short period of implementation of this technology, are presented in numerous scientific publications. The volume of the global market for Unmanned Aircraft Systems is constantly increasing, and Ukraine, given high development of the aircraft industry, can become one of the leading manufacturers of integrated solutions and services to meet the ever-growing needs of this market. Ukraine has potential to use unmanned aerial vehicles in agriculture in terms of technical, economic and human resources. UAVs can provide clear, high-resolution images for commercial use, including agriculture. However, at present, the area of increasing the activity of multi-rotor UAVs for agricultural needs is not sufficiently studied. Many scientific works of domestic and foreign authors are devoted to the use of UAVs in agriculture. Nevertheless, today, the full list of works that can be performed with the help of UAVs, in particular in agriculture (agronomy), has not yet been determined. Using unmanned aerial vehicles in agriculture is the innovation for Ukraine, since UAVs were primarily used for military needs and only after military tests began to be widely used in agriculture. An important section of research on ways to improve the functionality of UAVs in the agricultural sector is to improve ways to control UAVs when using these advanced technologies as machine learning and the Internet of things. The analysis of the most effective ways to increase the activity of UAVs in agriculture is carried out and it is stated that evelopment of UAVs with new capabilities and improvement of their sensor base are the main ways of their modernization. It is noted that addition of new sensors that provide more accurate information about the state of crops will allow farmers to monitor and care for plants as efficiently as possible.

  • Controllers for Two-Coordinate Positioning of the UAV Auxiliary Video Camera

    by Volodymyr Voytenko, Maksym Solodchuk, Yuriy Denisov, Alexander Pisarevskiy


  • Open Access

    THE INFLUENCE OF PULSATIONS OF AN AUTONOMOUS VOLTAGE INVERTER ON THE PHASE OF THE OPERATING ORGAN OF THE ON-BOARD AVIATION FOLLOWING SYSTEM

    by Chernihiv Polytechnic National University, Yuri Denisov, Vitalii Skuhariev

    On board an aircraft, an automatic control system ensures optimal aircraft engine operation. Its functions are related to monitoring the current parameters of the aircraft engine operating modes, their indication and control of individual working bodies that provide fuel, air and ignition supply according to the commands of the onboard computer. These commands are executed by automated low-power electric drives that are part of the systems of the relevant executive bodies that monitor the parameters of the engine's operating modes. Modern on-board electric drives are based on brushless motors that operate in DC mode, or in synchronous mode as an AC machine. These electric drives follow the specified laws of change of certain parameters, such as the phase position of the working bodies, which ensure the specified operating modes of the aircraft engine. The on-board electric drive of the tracking system is powered by the battery through an autonomous voltage inverter if the collectorless electric machine operates in synchronous mode, or in collector mode if it operates as a DC machine.The accuracy of the implementation of the specified tracking laws is the main indicator of such systems. This indicator is influenced by many factors, one of the main ones being the supply voltage fluctuations, which are a consequence of the discrete mode in the inverter operation, which raises the urgent problem of analysing their impact on the accuracy of the tracking laws. Given the significant impact of the inverter output voltage fluctuations on the accuracy of the tracking process by the executing electric drive, there is anurgent problem of assessing the level of its influence and finding ways to minimise it. An analysis of modern publications on the subject of the study has shown that in the process of developing tracking electric drives, their main accuracy indicator is estimated by the fundamental harmonic of the supply voltage without taking into account its actual shape. This approach greatly simplifies the analysis of the processes of the AC drive system powered by an inverter. However, the real rectangularshape of the motor supply voltage affects the smoothness of its rotor rotation, which worsens the accuracy of the tracking process as a result of the appearance of a pulsating torque. The reason for this is the result of the interaction of the fundamental harmonic field with the fields of higher harmonic currents; the largest amplitude of the pulsating torque is created by the currents of the fifth and seventh harmonics, and in general, the largest amplitude of torque pulsation in the rated load zoneis up to 10% of the rated torque.This raises the urgent problem of studying the effect of voltage fluctuations at the inverter output on the error of the electric drive following the law of change of the corresponding parameter in the aircraft engine operation mode control system. The main purpose of the publication is to analyse the error of tracking the law of phase change of the actuator in the aircraft engine control system and to find ways to minimise it. As a result of the study, a comparative assessment of the tracking error was obtained, taking into account the real form of the motor supply voltage and taking into account only the fundamental harmonicthe system was set up for a finite duration process. The comparison result showed a significant negative impact of the real supply voltage waveform on the tracking error.

  • Open Access

    THE WAYS REDUCED THE INFLUENCE OF PULSATIONS REVERSING THE INDICATORS OF ENERGY DYNAMIC ENERGY EFFICIENCY OF ON-BOARD POWER ELECTRONICS SYSTEMS

    by Chernihiv Polytechnic National University, Yuri Denisov, Vitalii Skuhariev

    The role of power electronics systems in ensuring reliable and easy operation of on-board avionics and gas turbine engine starting devices is crucial. Their feature is that they are powered by sources of limited power, which raises the problem of economical use of their energy resource. Achieving this goal is possible based on the implementation of high-qualitymanagement modes of energy processes occurring in on-board power electronics systems. The discrete nature of these processes gives rise to pulsations of adjustable parameters, which significantly affect the energy-dynamic indicators of power electronics systems. Therefore, the problem of reducing the impact of pulsations on the quality of energy and the dynamics of such systems is urgent. Formulation of the problem. It is proposed to improve the quality of power modes of on-board aviation power electronicssystems based on the analysis of means of reducing the influence of pulsations on the quality of power mode management processes. In known works devoted to the given problem, insufficient attention is paid to taking into account the impact of pulsations on the quality of processes of regulated power electronics systems on board aircraft and methods of reducing this impact. Autono-mous voltage inverters (AVI), controllable generators, and various impulse DC voltage converters are widely used on board air-craft. As a rule, they are elements of the corresponding closed self-regulation systems. During their development, the following issues must be resolved: circuitry of the power part of the converter, control systems, reduction of the influence of pulsations onpower losses and the quality of processes in feedback loops, minimization of electromagnetic interference, selection of high-quality active and passive elements. In the process of solving these issues, the influence of the switching frequency of converters and parasitic parameters of power devices on power losses in power electronics systems was analyzed. Recommendations are providedfor the selection of energy storage elements and power semiconductor devices to ensure minimum pulsations. A comparative anal-ysis of the topologies of various schemes of power electronics systems used in the distributed power supply systems of aircraft was carried out according to the criterion of the minimal influence of pulsations on energy-dynamic indicators. Ways to solve the problem of controlling converters at high frequencies in closed systems are shown, namely, minimization of the influence of power source pulsations on the reference task of the controller of the corresponding office. The result of this influence may be the exit of the controller from the controllable zone. It is not typical for regulators that are made on the basis of microcircuits with a low supply voltage. The effectiveness of discrete analysis methods for evaluating the influence of pulsations on the energy-dynamic indicators of on-board power electronics systems is shown. Conclusions. An analysis of ways to reduce the influence of converter pulsations on the energy-dynamic indicators of on-board power electronics systems showed that there are two ways to solve this problem. The first, related to increasing the switching frequency on the basis of semiconductor devices with minimum values of parasitic parameters, is a way of improving the technology of their production. For specialists who only use suchdevices in the process of designing and manufacturing power electronics systems, there is a way to reduce the impact of pulsations on their energy-dynamic indicators through passive and active filters, as well as through the construction of structural diagrams of power electronics systems in which control laws are implemented, which ensure minimal impact of pulsations on the energy and dynamics of power supply systems. Estimation of the level of pulsationsby the fundamental harmonic, which is used most often, is not sufficient. It is necessary to estimate the level of ripples from peak to peak of the value of the transient process parameter based on the discrete Z-transformation method. Роль систем силової електроніки в забезпеченні надійної роботи бортових радіоелектронних комплексів (літальні апарати, автомобільний транспорт та інші) різноманітного призначення є вирішальною. Особливістю таких систем є те, що вони живляться від джерел електроенергії обмеженої потужності. Здатність систем силової електроніки якісно та надійно впродовж довгого часу виконувати свої функції залежить від багатьох чинників, які залежать від якості енергодинамічних показників (ККД, перерегулювання, довжина перехідних процесів, стійкість), а також від якості характеристик активних та пасивних елементів силових, інформаційних кіл та їх топології. Головним чинником, який обмежує час роботи бортового електронного обладнання, є обмеженість енергетичного ресурсу, джерела живлення – акумулятора, який живить інформаційні та силові блоки бортових електронних комплексів. Забезпечення надійного функціонування цих комплексів впродовж довгого часу можливо на основі реалізації якісних енергетичних та...

  • Open Access

    COMPONENTS OF A SYSTEM FOR AUTOMATIC DETECTIONOF A ZONE OF INTEREST IN IMAGES OBTAINED FROM A UAV

    by Volodymyr Voytenko, Björn Olofsson, Lund University, Maksym Solodchuk, Yuriy Denisov, Володимир Войтенко, Юрій Денисов

    To reduce the load on the UAV operator during long-term search and rescue missions, an on-board automatic system that generates control signals for positioning an additional video camera with a narrow field of view is considered. The re-quirements for the system of automatic detection of the area of interest are defined. Various methods for detecting objects in images are considered, analyzed and compared. Software and hardware tools are discussed, which are advisable to use in the preparation and conduct of experimental studies.


  • Open Access

    ONE-TIME INTEGRATING DC ELECTRIC DRIVE SYSTEM FOR LAUNCHING A HELICOPTER GAS TURBINE ENGINE

    by Chernihiv Polytechnic National University, Yuriі Denisov, Gennady Bolotov, Yevhenii Kuts

    The purpose of this work is to develop a system for starting a gas turbine engine (GTE) of a helicopter, which implements interconnected control of the parameters of the current consumed from the on-board battery and the process of setting the speed by means of a valuer, which allows to optimize the dynamic characteristics of the system and increase the time spent on the energy resource of the battery. The goal was achieved in a double-circuit single-integrating electric drive system, which is astatic in current and static in speed, which corresponds to the requirements for the launch system of the GTE helicopter. As a result of the analysis of the transient characteristics of the system by current, the conditions for the existence of aperiodic, boundary, oscillatory modes, as well as the regularities of changes in the derivative current in these modes, are obtained. The magnitude of astatism by velocity and its relationship with the pattern of change in the output voltage of the velocity setter have been established. As a result of the analysis of the patterns of change in the derivative current, its minimum values for various setting parameters of the proportional regulator of the speed circuit at the time intervals of the transient characteristic have been established. It is proposed to form a transient characteristic of the electric drive system by current in three modes. Its initial section must be formed in the boundary mode, the next -in a weakly oscillatory mode. The third section should correspond to the adjustment of the regulator to a modular optimum. For the practical implementation of the proposed principle of forming the transition characteristic of the electric drive system, it is necessary to include a proportional regulator with a relay law of changing the setting parameter in the speed circuit. An analysis of the transient characteristic for current is carried out, taking into account the discrete nature of the change in the setting of the speed circuit regulator. Its comparison withthe transitional characteristic corresponding to the optimum modulo is carried out. It is established that the transient characteristicof the electric drive system with a relay regulator of the speed circuit differs from the transition characteristic tuned to the modular optimum, the absence of overregulation and smaller differences of the derivative at the interval of its existence. Thepresence of a speed specifier that allows you to stabilize the dynamic current of the electric motor and the low drops of itsderivative during the start-up of the GTE create conditions for a longer consumption of the limited energy resource of the on-board battery of the helicopter.

  • Open Access

    INCREASING THE TIME OF USING THE ENERGY RESOURCE OF THE ON-BOARD ACCUMULATORY BATTERY BY IMPROVING THE QUALITY OF CONTROLLING THE ELECTRIC QUADCOPTER'S PROPELLER DRIVES

    by Y Denisov, О Denisov, G Bolotov

    A review of the current state in quadcopters’ flight control systems showed that the electric drives of their propellers are performed according to single-circuit schemes with feedback on rotational speed in which the error in the results of monitoring the angles of roll, pitch, yaw is worked out by a control system with a PI or PID regulator. There is no astaticism load in such systems and the parameters of the current consumed from the on-board battery are not optimized. The consequence of this is a decrease of service life on-board battery and low quality flight control when the load changes. It is proposed to perform the electric drive system of the quadcopter’s screw according to a two-fold integrating structural scheme in which astaticism is provided during perturbations in control and load. A transient speed characteristic based on the optimization results of the double-integration scheme with speed and current circuits in accordance with a symmetrical optimum the parameters of which do not meet the requirements of quadcopter’s high-quality control flight mode was obtained and do not contribute to an increase in the time of using the energy resource of the on-board battery. It is proposed to include additional smoothing differentiating links at its input to eliminate the shortcomings of the obtained transient characteristic of the electric drive system in terms of speed. The parameters of these links were found using the compensation conditions. The obtained transient characteristics of the electric drive system of the quadcopter’s screws in terms of speed and current do not have sudden changes in the adjustable value and do not have overregulation. The result of such parameters in transient characteristics is high-quality control of the quadcopter’s flight mode and an increase in the time of using the energy resource of the on-board battery.