Nikolay I. Shestakov
Nikolay I. Shestakov has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Konstantin L. Chertes
Samara State Technical University (SSTU)
5 shared publications - Natalia V. Khokhlova
Moscow State University of Civil Engineering
3 shared publications - Roman Fediuk
Far Eastern Federal University, Vladivostok, Russia
2 shared publications - A. D. Makarov
National Research Moscow State University of Civil Engineering
1 shared publication - A. D. Ryzhov
Penza State University of Architecture and Construction
1 shared publication Artem P. Seyanko
Samara State Technical University (SSTU)
1 shared publication
Latest Publications
- 29 May 2026
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 21 (5)
Morphology of microdefects in asphalt concrete at the early stage of operational degradation
- 29 May 2026
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 21 (5)
Morphology of microdefects in asphalt concrete at the early stage of operational degradation
- Open Access
- 3 October 2025
- Published by Industrial University of Tyumen in Architecture, Construction, Transport
- Vol. 5 (3) , 55-73
Environmental impact of asphalt concrete plants on industrial areas via criteria-based method assessing
The study addresses the environmental risks posed by asphalt concrete plants operating in industrial zones, focusing on their impact on air, soil, and water resources. The objective was to develop and test an integrated criteria-based methodology for assessing such impacts. Three asphalt concrete plants with different production capacities and gas-cleaning efficiencies were selected as the research objects. The methodology included sequential evaluation in five areas: territorial impact, geological conditions, atmospheric emissions, soil degradation, and water pollution. Data collection involved satellite imagery, cadastral surveys, laboratory analyses of air and soil samples, and field observations. The results show that plants with higher production capacity generate significantly greater environmental loads, with CO2 and NOx emissions exceeding permissible levels, and with notable soil degradation and risks to hydrogeological stability. The discussion highlights that upgrading gas-cleaning units, implementing continuous water quality monitoring, and restoring disturbed soils are essential to mitigate the negative impacts. The proposed methodology proved effective for comprehensive environmental risk assessment and can be applied to other industrial facilities with similar environmental profiles.
- 3 October 2025
- Published by Industrial University of Tyumen in Architecture, Construction, Transport
- Vol. 5 (3) , 55-73
Open AccessEnvironmental impact of asphalt concrete plants on industrial areas via criteria-based method assessing
The study addresses the environmental risks posed by asphalt concrete plants operating in industrial zones, focusing on their impact on air, soil, and water resources. The objective was to develop and test an integrated criteria-based methodology for assessing such impacts. Three asphalt concrete plants with different production capacities and gas-cleaning efficiencies were selected as the research objects. The methodology included sequential evaluation in five areas: territorial impact, geological conditions, atmospheric emissions, soil degradation, and water pollution. Data collection involved satellite imagery, cadastral surveys, laboratory analyses of air and soil samples, and field observations. The results show that plants with higher production capacity generate significantly greater environmental loads, with CO2 and NOx emissions exceeding permissible levels, and with notable soil degradation and risks to hydrogeological stability. The discussion highlights that upgrading gas-cleaning units, implementing continuous water quality monitoring, and restoring disturbed soils are essential to mitigate the negative impacts. The proposed methodology proved effective for comprehensive environmental risk assessment and can be applied to other industrial facilities with similar environmental profiles.
- 28 May 2025
- Published by Izdatelstvo Izdatelstvo PGS in Promyshlennoe i Grazhdanskoe Stroitel'stvo
- No. 5
Оценка остаточного ресурса асфальтобетонного гранулята
Представлена методика количественной оценки остаточного ресурса асфальтобетонного гранулята, основанная на интеграции ключевых эксплуатационных параметров в единый показатель. Разработанный подход позволяет учесть влияние гранулометрического состава, содержания битума, влажности и доли пылевидных частиц на пригодность материала к повторному использованию. Предложена система частичных индексов, позволяющая определить степень соответствия асфальтобетонного гранулята нормативным требованиям и сформировать научно обоснованные рекомендации по его рациональному применению. Проведенные расчеты показали, что остаточный ресурс является универсальным критерием, позволяющим классифицировать асфальтобетонный гранулят по степени его пригодности для различных технологических процессов - от включения в горячие асфальтобетонные смеси до использования в слоях основания и конструкциях с пониженными требованиями. Разработанная модель дает возможность не только объективно оценить качество материала, но и оптимизировать процессы его переработки, обеспечивая снижение затрат и минимизацию негативного воздействия на окружающую среду.
- 28 May 2025
- Published by Izdatelstvo Izdatelstvo PGS in Promyshlennoe i Grazhdanskoe Stroitel'stvo
- No. 5
Оценка остаточного ресурса асфальтобетонного гранулята
Представлена методика количественной оценки остаточного ресурса асфальтобетонного гранулята, основанная на интеграции ключевых эксплуатационных параметров в единый показатель. Разработанный подход позволяет учесть влияние гранулометрического состава, содержания битума, влажности и доли пылевидных частиц на пригодность материала к повторному использованию. Предложена система частичных индексов, позволяющая определить степень соответствия асфальтобетонного гранулята нормативным требованиям и сформировать научно обоснованные рекомендации по его рациональному применению. Проведенные расчеты показали, что остаточный ресурс является универсальным критерием, позволяющим классифицировать асфальтобетонный гранулят по степени его пригодности для различных технологических процессов - от включения в горячие асфальтобетонные смеси до использования в слоях основания и конструкциях с пониженными требованиями. Разработанная модель дает возможность не только объективно оценить качество материала, но и оптимизировать процессы его переработки, обеспечивая снижение затрат и минимизацию негативного воздействия на окружающую среду.
- Open Access
- 29 June 2024
- Published by Far Eastern Federal University in ВЕСТНИК ИНЖЕНЕРНОЙ ШКОЛЫ ДВФУ
- No. 2(59),p. 119-126
Assessment of the environmental level of impact of road construction complex objects at the design stage
В статье рассматриваются вопросы разработки и апробации интегрированной методики оценки уровня воздействия объектов дорожно-строительного комплекса на различные аспекты окружающей среды. Цель исследования заключается в повышении точности прогнозирования экологических последствий при проектировании новых объектов инфраструктуры. Методы исследования включают применение математической модели, основанной на уравнении адвекции-диффузии с дополнением Гауссова распределения для оценки распространения загрязнителей. Эта модель позволяет учитывать как прямое перемещение, так и диффузное распространение загрязняющих веществ, что способствует более точному моделированию их поведения в различных условиях. Результаты исследования демонстрируют, что предложенная методика позволяет эффективно прогнозировать изменения в концентрациях загрязнителей в атмосфере на различных расстояниях от источника. Основные выводы подчеркивают, что интегрированный подход значительно улучшает качество экологической оценки воздействия строительства, предоставляя более надежные данные для принятия управленческих решений. Статья отражает применение комбинированного адвективно-диффузионного подхода с Гауссовым распределением для оценки динамики распространения загрязнителей в реальном времени и пространстве, что представляет собой значительное улучшение по сравнению с традиционными методами, фокусирующимися преимущественно на статическом анализе. The article discusses the development and validation of an integrated methodology for assessing the impact of road construction complex objects on various aspects of the environment. The research aim is to improve the accuracy of predicting environmental consequences in the design of new infrastructure projects. Research methods include the application of a mathematical model based on the advection-diffusion equation supplemented with Gaussian distribution to assess pollutant dispersion. This model allows for both direct and diffusive pollutant spread, contributing to more accurate modeling of their behavior under different conditions. The study results demonstrate that the proposed methodology effectively forecasts changes in pollutant concentrations in the atmosphere at various distances from the source. The main findings emphasize that the integrated approach significantly enhances the quality of environmental impact assessment of construction, providing more reliable data for managerial decision-making. The article reflects the application of a combined advection-diffusion approach with Gaussian distribution to assess real-time and spatial dynamics of pollutant dispersion, representing a substantial improvement over traditional methods primarily focusing on static analysis.
- 29 June 2024
- Published by Far Eastern Federal University in ВЕСТНИК ИНЖЕНЕРНОЙ ШКОЛЫ ДВФУ
- No. 2(59),p. 119-126
Open AccessAssessment of the environmental level of impact of road construction complex objects at the design stage
В статье рассматриваются вопросы разработки и апробации интегрированной методики оценки уровня воздействия объектов дорожно-строительного комплекса на различные аспекты окружающей среды. Цель исследования заключается в повышении точности прогнозирования экологических последствий при проектировании новых объектов инфраструктуры. Методы исследования включают применение математической модели, основанной на уравнении адвекции-диффузии с дополнением Гауссова распределения для оценки распространения загрязнителей. Эта модель позволяет учитывать как прямое перемещение, так и диффузное распространение загрязняющих веществ, что способствует более точному моделированию их поведения в различных условиях. Результаты исследования демонстрируют, что предложенная методика позволяет эффективно прогнозировать изменения в концентрациях загрязнителей в атмосфере на различных расстояниях от источника. Основные выводы подчеркивают, что интегрированный подход значительно улучшает качество экологической оценки воздействия строительства, предоставляя более надежные данные для принятия управленческих решений. Статья отражает применение комбинированного адвективно-диффузионного подхода с Гауссовым распределением для оценки динамики распространения загрязнителей в реальном времени и пространстве, что представляет собой значительное улучшение по сравнению с традиционными методами, фокусирующимися преимущественно на статическом анализе. The article discusses the development and validation of an integrated methodology for assessing the impact of road construction complex objects on various aspects of the environment. The research aim is to improve the accuracy of predicting environmental consequences in the design of new infrastructure projects. Research methods include the application of a mathematical model based on the advection-diffusion equation supplemented with Gaussian distribution to assess pollutant dispersion. This model allows for both direct and diffusive pollutant spread, contributing to more accurate modeling of their behavior under different conditions. The study results demonstrate that the proposed methodology effectively forecasts changes in pollutant concentrations in the atmosphere at various distances from the source. The main findings emphasize that the integrated approach significantly enhances the quality of environmental impact assessment of construction, providing more reliable data for managerial decision-making. The article reflects the application of a combined advection-diffusion approach with Gaussian distribution to assess real-time and spatial dynamics of pollutant dispersion, representing a substantial improvement over traditional methods primarily focusing on static analysis.
- Open Access
- 7 May 2024
- Published by Orel State University in Building and reconstruction
- No. 2,p. 118-127
Resource potential of dust entrainment of asphalt-concrete plants
In the modern construction industry, the problem of finding materials with increased stability that would provide minimal environmental impact with optimal economic efficiency is urgent. Considering global trends in the field of ecology and sustainable development, attention is focused on recycling and reuse of industrial waste. Of particular interest is the pulverized material formed during the operation of asphalt concrete plants. In this paper, the potential of integrating this type of waste as an alternative construction resource is studied. This article focuses on the urgent need to adapt the principles of sustainability in construction practice through the integration of materials with minimal environmental footprint. The key aspect of the study is the concept of recycling of pulverized waste from asphalt concrete production, which can help optimize the resource potential and reduce the environmental burden on the ecosystem. The study examines various dust compositions obtained from asphalt plants of different operating principles. The morphology of particles and the bitumen capacity parameter were investigated. It was found that by replacing up to 50% of mineral powder with carryover dust, there can be a significant environmental and economic impact for the road construction industry.
- 7 May 2024
- Published by Orel State University in Building and reconstruction
- No. 2,p. 118-127
Open AccessResource potential of dust entrainment of asphalt-concrete plants
In the modern construction industry, the problem of finding materials with increased stability that would provide minimal environmental impact with optimal economic efficiency is urgent. Considering global trends in the field of ecology and sustainable development, attention is focused on recycling and reuse of industrial waste. Of particular interest is the pulverized material formed during the operation of asphalt concrete plants. In this paper, the potential of integrating this type of waste as an alternative construction resource is studied. This article focuses on the urgent need to adapt the principles of sustainability in construction practice through the integration of materials with minimal environmental footprint. The key aspect of the study is the concept of recycling of pulverized waste from asphalt concrete production, which can help optimize the resource potential and reduce the environmental burden on the ecosystem. The study examines various dust compositions obtained from asphalt plants of different operating principles. The morphology of particles and the bitumen capacity parameter were investigated. It was found that by replacing up to 50% of mineral powder with carryover dust, there can be a significant environmental and economic impact for the road construction industry.
- 10 February 2024
- Published by Springer Nature
- p. 303-313
Application of Biopositive Technologies for the Development of an Alternative Resource Base
- 10 February 2024
- Published by Springer Nature
- p. 303-313
Application of Biopositive Technologies for the Development of an Alternative Resource Base
- Open Access
- 22 December 2023
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 18 (12) , 1926-1936
Изменение состава и свойств дорожного битума при его термостабилизации
Изменение состава и свойств дорожного битума при его термостабилизации
- 22 December 2023
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 18 (12) , 1926-1936
Open AccessИзменение состава и свойств дорожного битума при его термостабилизации
Изменение состава и свойств дорожного битума при его термостабилизации
- 30 June 2023
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 15 (3) , 220-227
Patterns of structure formation in lime composites with additive based on amorphous aluminosilicates
- 30 June 2023
- Published by CNT Nanostroitelstvo in Nanotechnologies in Construction: A Scientific Internet-Journal
- Vol. 15 (3) , 220-227
Patterns of structure formation in lime composites with additive based on amorphous aluminosilicates
- Open Access
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2791 (1)
Quality assessment of building materials in the construction of bridge structures
The choice of building materials used in the road industry requires compliance with design solutions, regulatory requirements, as well as a feasibility study and analysis of potential environmental impacts on the environment. At the same time, the existing standard designs of road transport structures suggest the use of certain road construction materials, which leads to the achievement of maximum efficiency of design solutions. In the presented work, the fundamental possibility of using the hierarchy analysis method for estimating the numerical parameter of biopositivity when choosing the type of strengthening of the cones of bridge structures is considered. The main purpose of this study is to develop and apply methods for calculating the numerical indicator of biopositivity, taking into account the criteria for environmental assessment, as well as testing the proposed methodology on known variants of structures for strengthening the abutments of bridge structures at the junction of supports with the body of the embankment. As an object for calculation, the most common options for strengthening soil cones of embankments of bridge structures using concrete, reinforced concrete, crushed stone, geosynthetic grids and reclamation material are presented. To establish the degree of influence of the selected criteria on the complex parameter of biopositivity, a group expert assessment was carried out with a generalization of the results obtained. It has been established that the criteria associated with vibration exposure and emissions into the atmosphere have the highest values. The method of pairwise comparison was used to calculate the biopositivity according to the selected criteria with the establishment of the weight of each of them. According to the obtained values, a graphical interpretation of the results obtained and a summary table of estimated indicators are presented. According to the results obtained in the work, the most effective variant of the type of strengthening the cones of bridge structures was established, in terms of minimal negative impact on the environment. Using the presented methodology, it becomes possible to comprehensively evaluate the biopositivity indicator and use it in substantiating the choice of materials used and types of structures of road-building complex objects.
- 1 January 2023
- Published by AIP Publishing in AIP Conference Proceedings
- Vol. 2791 (1)
Open AccessQuality assessment of building materials in the construction of bridge structures
The choice of building materials used in the road industry requires compliance with design solutions, regulatory requirements, as well as a feasibility study and analysis of potential environmental impacts on the environment. At the same time, the existing standard designs of road transport structures suggest the use of certain road construction materials, which leads to the achievement of maximum efficiency of design solutions. In the presented work, the fundamental possibility of using the hierarchy analysis method for estimating the numerical parameter of biopositivity when choosing the type of strengthening of the cones of bridge structures is considered. The main purpose of this study is to develop and apply methods for calculating the numerical indicator of biopositivity, taking into account the criteria for environmental assessment, as well as testing the proposed methodology on known variants of structures for strengthening the abutments of bridge structures at the junction of supports with the body of the embankment. As an object for calculation, the most common options for strengthening soil cones of embankments of bridge structures using concrete, reinforced concrete, crushed stone, geosynthetic grids and reclamation material are presented. To establish the degree of influence of the selected criteria on the complex parameter of biopositivity, a group expert assessment was carried out with a generalization of the results obtained. It has been established that the criteria associated with vibration exposure and emissions into the atmosphere have the highest values. The method of pairwise comparison was used to calculate the biopositivity according to the selected criteria with the establishment of the weight of each of them. According to the obtained values, a graphical interpretation of the results obtained and a summary table of estimated indicators are presented. According to the results obtained in the work, the most effective variant of the type of strengthening the cones of bridge structures was established, in terms of minimal negative impact on the environment. Using the presented methodology, it becomes possible to comprehensively evaluate the biopositivity indicator and use it in substantiating the choice of materials used and types of structures of road-building complex objects.
- 1 September 2022
- Published by Novosibirsk State University of Architecture and Civil Engineering (Sibstrin) in NEWS OF HIGHER EDUCATIONAL INSTITUTIONS. CONSTRUCTION
- Vol. 765 (9)
BIOPOSITIVE TECHNOLOGIES FOR HANDLING BITUMEN-CONTAINING CONSTRUCTION WASTE
The article discusses various biopositive technologies for handling bituminous waste based on roofing materials after the loss of their operational properties. The processes occurring during the thermal destruction of such materials in synchronous thermal analysis with the study of degradation products are considered. The effectiveness of the use of plasma technologies in the treatment of bitumen - containing waste has been studied and it has been established that the ratio of the mass of waste material to solid residue ash reaches 400:1, thus the degree of processing is more than 99,7 %. The authors proposed an alternative technology that allows the use of bitumen contained in the waste of waterproofing materials as an organic raw material for further use in the construction industry. Considered is the chemical recovery of bitumen using various organic solvents, such as technical kerosene, carbon tetrachloride, chloroform and trichlorethylene. According to the calculated indices of correspondence of the chemical composition, it was established that carbon tetrachloride is the most effective solvent. The chemical composition of the bitumen extracted with this solvent is closest to the control sample taken without the participation of solvents.
- 1 September 2022
- Published by Novosibirsk State University of Architecture and Civil Engineering (Sibstrin) in NEWS OF HIGHER EDUCATIONAL INSTITUTIONS. CONSTRUCTION
- Vol. 765 (9)
BIOPOSITIVE TECHNOLOGIES FOR HANDLING BITUMEN-CONTAINING CONSTRUCTION WASTE
The article discusses various biopositive technologies for handling bituminous waste based on roofing materials after the loss of their operational properties. The processes occurring during the thermal destruction of such materials in synchronous thermal analysis with the study of degradation products are considered. The effectiveness of the use of plasma technologies in the treatment of bitumen - containing waste has been studied and it has been established that the ratio of the mass of waste material to solid residue ash reaches 400:1, thus the degree of processing is more than 99,7 %. The authors proposed an alternative technology that allows the use of bitumen contained in the waste of waterproofing materials as an organic raw material for further use in the construction industry. Considered is the chemical recovery of bitumen using various organic solvents, such as technical kerosene, carbon tetrachloride, chloroform and trichlorethylene. According to the calculated indices of correspondence of the chemical composition, it was established that carbon tetrachloride is the most effective solvent. The chemical composition of the bitumen extracted with this solvent is closest to the control sample taken without the participation of solvents.