Davide Laghi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Davide Laghi has a total of 44 co-authors. Here are the top co-authors by number of shared publications:
Marco Fabbri
4 shared publications- Marco Fabbri
Fusion for Energy
4 shared publications Raul Pampin
4 shared publicationsAlfredo Portone
3 shared publicationsAndrej Trkov
Jožef Stefan Institute, Ljubljana, Slovenia
2 shared publicationsLorenzo Isolan
2 shared publications
Latest Publications
- Open Access
- 29 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126029
Further development of JADE as a tool for validation and verification of nuclear data libraries and particle transport codes
Several international leading efforts are focused on the improvement of evaluations for nuclear data. This data captures all of the physics of nuclear interactions for which the applications are far ranging from medical fields to criticality simulations. Nuclear analysis in the field of fusion, commonly referred to as neutronics, is one such application, typically employing Monte Carlo methods that rely on continuous-energy, pointwise cross-section data. Historically, the most widely adopted and complete radiation transport code in this field is MCNP, however in recent years there has been an evident trend in exploration of alternatives, most notably OpenMC. Nuclear analysis is a critical driver of the design, operation, safety and decommissioning of future fusion power plants stressing the importance of confidence in the transport codes and underlying nuclear data used in prediction of the radiation environment. Here we present recent developments to the JADE tool—a framework originally conceived for verification and validation of nuclear data within MCNP, now extended to performing cross-code comparisons. In particular, the developments required for the complete integration of OpenMC are detailed. A demonstration of this capability is presented for several of the currently implemented computational and experimental OpenMC benchmarks, with results compared against MCNP with the Fusion ENDF-3.2c and Evaluated Nuclear Data Library/B-VIII.0 nuclear data libraries.
- 29 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (12) , 126029
Open AccessFurther development of JADE as a tool for validation and verification of nuclear data libraries and particle transport codes
Several international leading efforts are focused on the improvement of evaluations for nuclear data. This data captures all of the physics of nuclear interactions for which the applications are far ranging from medical fields to criticality simulations. Nuclear analysis in the field of fusion, commonly referred to as neutronics, is one such application, typically employing Monte Carlo methods that rely on continuous-energy, pointwise cross-section data. Historically, the most widely adopted and complete radiation transport code in this field is MCNP, however in recent years there has been an evident trend in exploration of alternatives, most notably OpenMC. Nuclear analysis is a critical driver of the design, operation, safety and decommissioning of future fusion power plants stressing the importance of confidence in the transport codes and underlying nuclear data used in prediction of the radiation environment. Here we present recent developments to the JADE tool—a framework originally conceived for verification and validation of nuclear data within MCNP, now extended to performing cross-code comparisons. In particular, the developments required for the complete integration of OpenMC are detailed. A demonstration of this capability is presented for several of the currently implemented computational and experimental OpenMC benchmarks, with results compared against MCNP with the Fusion ENDF-3.2c and Evaluated Nuclear Data Library/B-VIII.0 nuclear data libraries.
- 2 July 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 231
Application of the TUD-W benchmark for nuclear data and code assessment
- 2 July 2026
- Published by Elsevier in Fusion Engineering and Design
- Vol. 231
Application of the TUD-W benchmark for nuclear data and code assessment
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Preliminary Design of a Supporting Structure for the Full Current Test of ITER TF Magnet
IO (ITER Organization) planned cold tests for Toroidal Field (TF) and Poloidal Field (PF1) coils, and a test facility is under development for this specific purpose. The TF coil test campaign foresees a series of tests at half operational current and a final one at full current, 68kA. The latter requires a further development of the facility, due to the severity of the test together with a series of design constraints. Firstly, a stand-alone TF coil is subjected to a stress condition different from the operational one, since it is not part of the entire magnetic system, where centripetal actions are shared and reacted by wedging. This condition results in significant bending of the inboard leg and a strain state potentially affecting the superconductor performance. Secondly, the required supporting structures to mitigate this bending, apart from being effective in increasing the stiffness and structurally sound, must withstand strict requirements in terms of dimension, interface with other components, handling and weight. In this investigation the preliminary design of the necessary auxiliary structure is discussed. The results of the FEM mechanical and thermal analyses show how the design meets the requirements in terms of stresses in the TF coil and strain in the Winding Pack (WP), as well as the structural compliance of both coil and supporting structure, also in compliance with the requirements of assembly and handling in the facility.
- 6 November 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 36 (3) , 1-5
Preliminary Design of a Supporting Structure for the Full Current Test of ITER TF Magnet
IO (ITER Organization) planned cold tests for Toroidal Field (TF) and Poloidal Field (PF1) coils, and a test facility is under development for this specific purpose. The TF coil test campaign foresees a series of tests at half operational current and a final one at full current, 68kA. The latter requires a further development of the facility, due to the severity of the test together with a series of design constraints. Firstly, a stand-alone TF coil is subjected to a stress condition different from the operational one, since it is not part of the entire magnetic system, where centripetal actions are shared and reacted by wedging. This condition results in significant bending of the inboard leg and a strain state potentially affecting the superconductor performance. Secondly, the required supporting structures to mitigate this bending, apart from being effective in increasing the stiffness and structurally sound, must withstand strict requirements in terms of dimension, interface with other components, handling and weight. In this investigation the preliminary design of the necessary auxiliary structure is discussed. The results of the FEM mechanical and thermal analyses show how the design meets the requirements in terms of stresses in the TF coil and strain in the Winding Pack (WP), as well as the structural compliance of both coil and supporting structure, also in compliance with the requirements of assembly and handling in the facility.
- 15 February 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 213
Comprehensive assessment of nuclear heating in ITER superconducting magnets using a full-tokamak 360° model
- 15 February 2025
- Published by Elsevier in Fusion Engineering and Design
- Vol. 213
Comprehensive assessment of nuclear heating in ITER superconducting magnets using a full-tokamak 360° model
- 15 December 2022
- Published by Elsevier in Fusion Engineering and Design
- Vol. 187
Status of JADE, an open-source software for nuclear data libraries V&V
- 15 December 2022
- Published by Elsevier in Fusion Engineering and Design
- Vol. 187
Status of JADE, an open-source software for nuclear data libraries V&V
- 11 June 2022
- Published by Elsevier in Radiation Physics and Chemistry
- Vol. 200
Compact and very high dose-rate plasma focus radiation sources for medical applications
- 11 June 2022
- Published by Elsevier in Radiation Physics and Chemistry
- Vol. 200
Compact and very high dose-rate plasma focus radiation sources for medical applications
- 18 October 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (11) , 116073
Application of JADE V&V capabilities to the new FENDL v3.2 beta release
- 18 October 2021
- Published by IOP Publishing in Nuclear Fusion
- Vol. 61 (11) , 116073
Application of JADE V&V capabilities to the new FENDL v3.2 beta release
- 1 December 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 161
JADE, a new software tool for nuclear fusion data libraries verification & validation
- 1 December 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 161
JADE, a new software tool for nuclear fusion data libraries verification & validation
- 1 October 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 159
Understanding and investigating the relationships between geometrical errors and lost particles in MCNP
- 1 October 2020
- Published by Elsevier in Fusion Engineering and Design
- Vol. 159
Understanding and investigating the relationships between geometrical errors and lost particles in MCNP