IPIgor Panasyuk

Igor Panasyuk

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Igor Panasyuk has a total of 26 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Assessing the impact of sewing machine thread take-up mechanism parameters on the magnitude and nature of thread take-up

    by Oleksandr Manoilenko, Volodymyr Dvorzhak, Vasyl Horobets, Igor Panasiuk, Dmytro Bezuhlyi

    The subject of this study is the needle thread take-up mechanisms (NTТM) of modern chain stitch sewing machines of classes 400 and 600. The principal issue with these mechanisms is the complexity of their adjustment because of the large number of adjustable parameters and the need for clear recommendations for proper setup, which negatively affects their performance. The research involved analyzing the impact of NTTM’s kinematic parameters and various thread path configurations in machines. The study revealed new patterns that allow for more precise thread take-up regulation, enabling better synchronization of the actual thread take-up with the required amount, thereby improving stitch quality and increasing sewing process productivity. Accurate thread take-up adjustment prevents excessive or insufficient thread tension, a common issue when sewing materials with variable thickness or stitch length. The results can be used to adjust sewing machines and automate the tuning of technological processes by changing the adjustment parameters with variations in technological parameters. This is particularly important in producing 3D textile structures for reinforcing composite molds, where adjusting for average material thickness can cause thread tension issues when the current thickness changes. The practical application of these results will ensure stable sewing quality based on stitch parameters, which is relevant for automating machine settings and working with materials of varying thicknesses. The proposed recommendations will improve the manufacturing process and increase equipment efficiency


  • Synthesis and research of the spatial eight-link mechanism of the barreling machine

    by M Zalyubovskii, I Panasyuk, S Koshel, O Koshel, L Akimova

    Purpose. Geometric synthesis of a statically determined spatial eight-link hinged mechanism with rotary kinematic pairs of a barreling machine, in which the working capacity carries out a complex spatial movement, followed by an analytical study of the structural features of the machine mechanism. Methodology. An analytical approach was used in the study of the eight-link hinged mechanism with rotary kinematic pairs, which consists of geometric and structural synthesis, and the design of barreling machine was modeled in the SolidWorks 2021 automated design software. Findings. One of the possible options for freeing the spatial mechanism of the barreling machine from passive connection is proposed, the synthesis of a statically determined spatial eight-link hinged mechanism with rotational kinematics is carried out. An appropriate design of a barreling machine with two driving links has been developed, the use of which creates conditions for increasing its reliability during operation and simultaneously increasing the productivity of performing the corresponding barreling operations. Analytical studies of the main geometric and structural parameters of the barreling machine were carried out. Originality. The connection between the corresponding geometric parameters of the synthesized statically determined spatial eight-link mechanism is established, which allows determining the rational ratio of the lengths of its links to each other. The relationship between the lengths of the links, their position and the angle of swing of the rocker arm together with the drive shaft of the machine is also established. Practical value. The synthesis of a statically determined spatial eight-link hinged mechanism with rotary kinematic pairs with two degrees of mobility was performed. Based on the synthesis of the mechanism, a new design of the barreling machine with two driving links was developed. Mathematical expressions for calculating the main geometric relationships of the link lengths of the developed machine structure were obtained.


  • FORCE STUDY OF REACTIVE LOADS IN KINEMATIC COUPLES OF A WORKING CAPACITY TURNING MACHINE WITH COMPLEX SPACE MOVEMENT AND VARIABLE VOLUME

    by Mark Zalyubovskyi, Mariia Blazhenko, National University of Food Technologies Open International University of Human Development “Ukraine”, Igor Panasyuk, Kyiv National University of Technology and Design

    High productivity when performing finishing technological operations, as well as technological processes of mixing loose fine-dispersed substances, can be achieved with the use of equipment in which working containers perform complex spatial movement. To date, various types of developed felting machines with complex spatial movement of working containers are known. Each type of such equipment corresponds to the implementation of various felting technological operations – separation of parts from sprues, grinding or polishing of products, cleaning of metal parts from corrosion or mixing of loose fine-dispersed substances. During the operation of the rolling equipment, various reactive loads arise in the kinematic pairs, which depend on the design features of the machines. With the use of the automated design system “SolidWorks”, 3D modeling and further strength research of a model of a rolling machine with a working capacity with complex spatial movement and variable volume was performed. In the kinematic chain of the machine under study, an additional moving connecting rod link with rotational and translational kinematic pairs is used. During the performance of the force study, the reactions in all rotational and translational kinematic pairs were determined, the influence of the change in the interaxial distance of the working capacity and the additional moving link of the connecting rod on the maximum values of the reactions in the kinematic pairs of the machine was investigated. The presented results of analytical studies can be applied in the relevant design bureaus of machine-building enterprises at the stage of designing equipment with complex spatial movement of working capacities and felting technological processes.

  • RESEARCH OF THE CHANGE OF THE MOTION MODES OF THE WORKING ARRAY IN A TURNING MACHINE WITH AN ADDITIONAL MOVEABLE SLIDING LINK DEPENDING ON THE CHANGE OF DESIGN FEATURES

    by Mark Zalyubovskyi, Igor Panasyuk, Kyiv National University of Technology and Design, Dmitro Lychov, Open International University of Human Development “Ukraine”, Ganna Koshel

    With the help of the SolidWorks automated design system, analytical studies of the rolling machine with complex spatial movement of the working capacity of the “Turbula” type, which contains an additional moving link of the slider in its kinematic chain, were performed. On the basis of the analytical studies, the relationship between the change in the modes of movement of the working array in the middle of the container, the value of the angular velocity of the drive shaft, the scale standard size and the ratio of the interaxial distance of the container to the interaxial distance of the forks was determined. The classification of the movement modes of the working massif is presented, in particular, which should include cascade, mixed and waterfall movement modes. Each movement mode corresponds to the implementation of the corresponding types of felting technological operations or mixing of loose fine-dispersed substances. The effect of changing the length of the working capacity, which is characterized by the ratio of the interaxial distance of the working capacity to the interaxial distance of the leading or driven forks of the machine, on the change in the modes of movement of the working array has been established. Mathematical dependencies have been obtained for determining the maximum angular velocity of the drive shaft of the “Turbula” type rolling machine with an additional movable slider link, which will correspond to the formation of the necessary mode of movement of the working array. The presented results of analytical studies can be applied in the relevant design bureaus of machine-building enterprises at the stage of designing equipment with complex spatial movement of working capacities and felting technological processes.

  • DETERMINATION OF THE RELATIONSHIP BETWEEN THE CHANGE OF THE MOTION MODES OF THE WORKING ARRAY AND THE DESIGN FEATURES OF THE “TURBULA” TYPE TURNING MACHINE

    by Mark Zalyubovskyi, Igor Panasyuk, Olexandr Koshel, Kyiv National University of Technology and Design, Open International University of Human Development “Ukraine”

    Using the SolidWorks automated design system, analytical studies of the “Turbula” type rolling machine with an additional movable rocker link with a vertical axis of rotation were carried out for the possibility of determining the dependence between the change in the movement modes of the working array and the design features of this rolling machine. It is noted that the movement of the working array in the filling tanks with different types of movement can be carried out in cascade, waterfall, mixed, as well as closed modes of movement. During the implementation of each mode of movement of the working array, conditions are created for the performance of appropriate felting technological operations or mixing of loose fine-dispersed substances. It was established that the change in the modes of movement of the working array in the rolling container performing complex spatial movement depends on three factors – the large-scale standard size of the rolling machine, the angular velocity of the drive shaft and the ratio of the interaxial distance of the container to the interaxial distance of the forks, which is characterized by the coefficient λ, the relationship is established the relationship between these factors. Mathematical dependencies have been obtained to determine the maximum angular speed of the drive shaft of the “Turbula” type rolling machine with an additional movable rocker link with a vertical axis of rotation, which will correspond to the implementation of the necessary mode of movement of the working array, when it moves in a given capacity. The obtained results of analytical studies can be used in the relevant design bureaus of machine-building enterprises at the stage of designing rolling equipment with complex spatial movement of working capacities.

  • DEVELOPMENT OF A HIGH-PERFORMANCE HOLDING MACHINE WITH COMPLEX SPATIAL MOVEMENT OF TWO WORKING CAPACITIES

    by Zalyubovskyi Mark, Igor Panasyuk, Kyiv National University of Technology and Design

    A new design of the galvanizing machine is proposed, which is equipped with two working tanks that perform complex spatial movement. The structure and principle of operation of the developed design of the machine are accurately described. The developed design of the machine with two capacities that perform complex spatial movement allows to increase considerably productivity of processing of details due to the fact that there is a possibility to carry out two different thawing technological operations on one machine or to process two parties of different details at the same time. The design of the machine, during operation, allows to involve in working process, both both working capacities, and one. Equipping the machine with a special drive design with four Hook hinges allows to reproduce the required law of change of angular velocity on each driving shaft of the machine, the implementation of which will create conditions that will ensure the same intensity of the working array between opposite ends of the tank in opposite directions. process, as well as uniform dynamic loading of all moving parts. Analytical studies were performed, within which some geometrical parameters of the machine design were determined, in particular, the value of the angle α between the axes of the shafts of each Hook hinge was established, which will ensure the implementation of the required angular velocity law on the machine drive shaft. The relationship between the extreme values of the law of change of the angular velocity of the driving shafts of the machine and the magnitude of the angles in each Hook hinge is established. The obtained results of analytical research can be used in the relevant design offices of machine-building enterprises at the stage of designing galvanizing equipment with complex spatial movement of working tanks.

  • ANALYTICAL INVESTIGATION OF SOME CONSTRUCTIVE PARAMETERS OF A HOLDING MACHINE WITH TWO WORKING CAPACITIES CONNECTED BETWEEN EACH OTHER

    by Open International University of Human Development “Ukraine”, Mark Zalyubovskyi, Igor Panasyuk, Kyiv National University of Technology and Design

    The disadvantages of using machine mechanisms in the kinematic circuits of which contain a passive connection are described. A three-dimensional statically defined mechanism of the “Turbula” type machine without the presence of a passive connection in its kinematic circuit is proposed. This design of the machine is realized due to the introduction into the kinematic circuit of an additional moving link – the second working capacity. Operation of this design of the car allows to increase productivity of processing of details considerably due to the fact that there is a possibility on one car to carry out two different technological operations at the same time or to process two parties of various details at the same time. The principle of operation of the mechanism and the machine is described. Analytical researches of the basic geometrical and constructive parameters of the galvanizing machine with two working capacities which, as a whole, provide its rational functioning are executed. The relationship between the geometric parameters of the moving parts of the machine and the change in the amplitude of their movements. In particular, mathematical dependences are obtained, which make it possible to calculate the amplitude of the angle change between the axes of two tanks, as well as the amplitude of the distance change between mutually perpendicular geometric axes of the forks to the working tanks. The operation of this machine design will significantly increase the productivity of machining parts due to the fact that it is possible to perform two different technological operations on one machine or simultaneously process two batches of different parts. The obtained results of analytical researches can be used in the corresponding design bureaus of the machine-building enterprises at a stage of designing of the galting equipment with difficult spatial movement of working capacities.

  • Open Access

    Method for predicting the dissemination of hazardous substances in the soil during long-term storage of galvanic waste

    by Larisa Tretiakova, Liudmyla Mitiuk, Igor Panasiuk, Elina Rebuel

    The problem of production waste storage in open areas of an enterprise with a galvanic shop for the production of chips and microchips has been investigated. The composition of the sludge obtained after sewage treatment of the production of the copper line was investigated. The aim of the article is to develop a mathematical model for predicting the distribution of compounds with heavy metals in the soil during long-term storage of galvanic sludge in open areas. Modeling the process of movement of salts from the earth's surface into the lower layers of the aeration zone occurs according to the laws of molecular diffusion. The method is developed on the basis of a mathematical model that makes it possible to estimate the spread over the depth of the ground and level of soil salinity over time using initial information about soil structure and its characteristics (molecular diffusion coefficient, volume humidity), annual volumes and conditions of sludge storage in the enterprise. Restrictions are set: the presence of harmful substances on the soil surface with a concentration that exceeds the permissible level; inadmissibility of harmful substances to aquifers. The practical use of the method made it possible to identify the main dangers during long-term storage of galvanic waste in open areas. The dynamics of soil salinity levels and the depth of penetration of heavy metals increase over twenty years of conservation has been determined, as well as the possibility of hazardous compounds entering groundwater has been assessed. Polyvinyl chloride packaging has a maximum life span of 15 years. Waste should not be stored in packages and in closed areas for more than 10 years. According to the prediction results, it can be stated that storage in landfills of galvanic waste for more than 15 years leads to significant salinization of the soil and creates conditions for an emergency situation, which is caused by harmful substances entering the water horizons. Recommendations for improving storage conditions are given and the need for recycling of industrial waste is substantiated

  • Open Access

    Increasing the efficiency of multy-variant calculations of electromagnetic field distribution in matrix of a polygradient separator

    by Jasim Mohmed Jasim Jasim, Iryna Shvedchykova, Igor Panasiuk, Julia Romanchenko, Inna Melkonova

    An approach is proposed to carry out multivariate calculations of the magnetic field distribution in the working gaps of a plate polygradient matrix of an electromagnetic separator, based on a combination of the advantages of two- and three-dimensional computer modeling. Two-dimensional geometric models of computational domains are developed, which differ in the geometric dimensions of the plate matrix elements and working air gaps. To determine the vector magnetic potential at the boundaries of two-dimensional computational domains, a computational 3D experiment is carried out. For this, three variants of the electromagnetic separator are selected, which differ in the size of the working air gaps of the polygradient matrices. For them, three-dimensional computer models are built, the spatial distribution of the magnetic field in the working intervals of the electromagnetic separator matrix and the obtained numerical values of the vector magnetic potential at the boundaries of the computational domains are investigated. The determination of the values of the vector magnetic potential for all other models is carried out by interpolation. The obtained values of the vector magnetic potential are used to set the boundary conditions in a computational 2D experiment. An approach to the choice of a rational version of a lamellar matrix is substantiated, which provides a solution to the problem according to the criterion of the effective area of the working area. Using the method of simple enumeration, a variant of the structure of a polygradient matrix with rational geometric parameters is selected. The productivity of the electromagnetic separator with rational geometric parameters of the matrix increased by 3–5 % with the same efficiency of extraction of ferromagnetic inclusions in comparison with the basic version of the device


  • Machines with complex motion working capacities for processing polymer parts

    by Open International University of Human Developmеnt «Ukraine», Mark Zalyubovskii, Igor Panasiuk, Viktor Malyshev

    Aspects of processing polymer parts in rolling mills are considered machines with complex movement of working capacities in the industry mechanical engineering The principles and regularities are highlighted construction of such equipment. For engineers, students and post-graduate students of the "Industrial mechanical engineering", "Applied mechanics" and "Automotive transport". It may be useful for the employees of the Research Institute and KB that specialize in the design of rolling equipment and production of polymer parts.