AAAli A. Alizadehmojarad

Ali A. Alizadehmojarad

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ali A. Alizadehmojarad has a total of 34 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Fluorescent Modulation of H2O2 Nanosensor Responses from ss(GT)15-DNA Single-Walled Carbon Nanotube-Protein Complexes

    by Thomas K. Porter, Gabriel Sánchez-Velázquez, Lucas Ospina, Ali A. Alizadehmojarad, Xiaoyi Wang, Michael S. Strano

    Fluorescent single-walled carbon nanotube (SWNT) sensors offer single-molecule sensitivity and resistance to photobleaching, but their deployment in biological media is often complicated by protein adsorption that can alter the sensor’s response to its target analyte. Herein, we evaluate how hydrogen peroxide (H2O2), a commonly studied analyte, changes the nanosensor response of protein complexes with ss(GT)15 DNA-wrapped SWNTs (G-SWNT) as a model nanosensor interface. We define an attenuation factor to quantify deviations from the uncomplexed response across a broad range of concentrations and protein type, fitting the resulting dose–response behavior to single-site and two-step adsorption models that include the H2O2 analyte. We find that the H2O2 response varied widely across proteins, ranging from enhanced quenching to complete attenuation to full inversion of the signal direction. For 14 protein-G-SWNT complexes, attenuation followed protein surface occupancy and was captured by a Langmuir model, while the remainder exhibited non-monotonic behavior reflecting protein–protein or protein–analyte interactions. Horseradish peroxidase and laccase, the strongest quenchers post protein-complex formation, converted the conventional turn-off sensor into a turn-on sensor; we show through complementary H2O2 experiments and modeling that this inversion is well described by competitive adsorption coupled to a protein–analyte reaction mechanism. Concurrent absorbance and emission bleaching identify charge-transfer doping by redox-active metal cofactors as the underlying photophysical mechanism. It may be possible to generalize these results to inform how the influence of off-target protein adsorption alters fluorescent nanosensor responses, with direct implications for designing fluorescent sensors in protein-rich environments.

  • Solution-Phase Protein Adsorption to ss(GT)15-DNA-Wrapped Single-Walled Carbon Nanotubes

    by Gabriel SánChez-VelázQuez, Thomas K. Porter, Lucas Ospina, Ali A. Alizadehmojarad, Wonjun Yim, Xiaoyi Wang, Michael S. Strano

    Proteins in solution adsorb to the corona of nanoparticles such as single-walled carbon nanotubes (SWCNTs), but these interactions are difficult to predict and analyze due to ambiguities in the structure of the latter. In this work, we employ ss(GT)15-DNA-wrapped SWCNTs, a commonly used fluorescent sensor construct, to examine protein adsorption by quantifying binding dissociation constants and characterizing the corresponding photophysical effects. A library of 20 proteins is used to evaluate adsorption-induced changes in photoluminescence (PL) intensity (ΔI/I0) and emission wavelength upon solution phase binding. We find that 15 proteins produce monotonic dose–response behavior well described using a single-site Langmuir model. Alternatively, five proteins exhibited more complex, nonmonotonic behavior consistent with a two-step binding model representing protein–protein interactions coupled to adsorption. The study reveals that metalloproteins, which comprised 12 of the 20 proteins in the library, induced, on average, greater PL quenching compared with metal-free proteins for this system, with maximum binding-associated quenching (ΔI/I0) of 94% for metalloproteins versus 20% for metal-free proteins. For metalloproteins, we introduce a proximity-based quenching framework in which protein size provides a coarse proxy for cofactor–SWCNT separation, offering a mechanistic interpretation of the observed quenching variation across proteins. Together, these results establish the use of metal coordination sites, such as those in metalloproteins, to assist the transduction of certain nanoparticle fluorescent sensors, helping with sensor probe design and interpretation in biological environments.


  • A Human Glucoregulatory Model for the Rational Design and Evaluation of Diabetes Therapeutics

    by Marco Machado, Sungyun Yang, Ali A. Alizadehmojarad, Michael S. Strano

    Diabetes mellitus remains a leading cause of morbidity worldwide, motivating the development of novel diabetes therapeutics. Computational glucoregulatory models that incorporate biochemical signaling and mechanisms have shown utility for preclinical evaluation and even the rational design of such interventions, potentially reducing the need for animal experimentation. In this work, we expand upon our IM3PACT 2.0 computational framework by applying it to human clinical data and demonstrate its utility for translational prediction of glucose-responsive glucagon (GRG) therapeutic performance. The model was parameterized separately for healthy and type 1 diabetes (T1D) humans using a data-fitting procedure applied to clinical insulin and glucagon injection datasets. The resulting healthy model reproduces the damped glucose recovery clinically observed following insulin administration, characteristic of coupled insulin–glucagon regulation. Sensitivity analysis was performed to identify parameters critical to describing glucose responses in the injection datasets, and a species comparison was performed that benchmarked human parameters against our previously validated rat model. Model performance was evaluated using a series of simulated test injections, including doses outside the fitted dataset. This human model was then used to simulate the translational therapeutic effect of a hydrogel-based composite microneedle (cMN) patch GRG, previously evaluated in streptozotocin-induced T1D rats. A generalized parametric GRG design framework was subsequently developed, mapping the kinetic and drug-loading design space that yields effective therapeutic performance in T1D humans. The parameterized framework constitutes a validated in silico platform for the preclinical evaluation and rational design of glucose-responsive glucagon therapeutics in humans.

  • Open Access

    DNA Assembly Templated by Chiral Nanotube Lattices: From Helix to Rings

    by Ravi R. Sonani, Ali A. Alizadehmojarad, Nathaniel Hurley, Joshua Hihath, Michael S. Strano, Edward H. Egelman, Ming Zheng

    Controlled assembly of DNA expands its utility in materials science. Most DNA-based architectures rely on Watson–Crick base pairing and stacking. Identifying additional programmable interactions could widen the design space. Single-stranded DNA (ssDNA) is known to adsorb on carbon nanotubes (CNTs) as sequence- and chirality-dependent helices, but direct structural evidence for a nanotube lattice-templating mechanism has been limited. Here we use cryo-electron microscopy to compare the assembly of the ssDNA sequence TTA TAT TAT ATT (ss65) on enantiomeric (6,5) CNTs. On the left-handed (+) (6,5) CNT, ss65 forms stacked, ring-like wraps with an axial repeat of 15.3 Å and with micrometer-scale coherence length. In contrast, on the right-handed (−) (6,5) CNT, ss65 adopts a conventional 1-start helical wrap with a helical pitch of ∼16.4 Å. These results indicate that the handedness of the underlying chiral lattice can bias ssDNA into distinct topologies (helix versus rings) and suggest a strategy for DNA assembly based on CNT lattice recognition, in addition to base pairing and stacking.


  • Quantum Defects Engineered in Chirality Pure Single-Wall Carbon Nanotubes for Enabling Ratiometric Sensing of Insulin

    by Ali A. Alizadehmojarad, Hohyung Kang, Gabriel Sánchez-Velázquez, Xun Gong, Michael S. Strano

    The Corona Phase Molecular Recognition (CoPhMoRe) method employs fluorescent semiconducting single-wall carbon nanotubes (SWCNTs) wrapped with heteropolymers composed of hydrophobic and hydrophilic groups, thereby creating binding sites on the surface for specific analytes. The C16 PEG2K Ceramide heteropolymer corona phase of SWCNTs allows selective binding and fluorescent detection of the hormone insulin. Herein, we incorporate quantum defects into the pristine structure of fluorescent SWCNTs to enable ratiometric sensing of analytes with insulin as a test case. SWCNTs are wrapped with C16 PEG2K Ceramide and subjected to UV irradiation in the presence of 5-iodoracil, inducing sp3 defects within the sp2 hybridized carbon atom network of the SWCNTs. This modification results in the emergence of a new emission feature (E11*) alongside the intrinsic E11 emission. Additionally, we scaled up a method for the isolation of single-chirality SWCNTs, which enhances the efficacy of CoPhMoRe by considerably simplifying the fluorescence spectrum and background emission of the sensor. Our observations show that insulin quenches the fluorescence of such sensors composed of chirality-sorted SWCNTs by an average of 20% more than that of sensors made from unsorted SWCNTs. The use of sorted SWCNTs also significantly improves the fabrication of ratiometric insulin sensors by enabling precise modulation of the E11*/E11 ratio. To quantify the ratiometric sensor response, a new set of metrics is introduced, including the spectral shift and intensity of the E11 and E11* emission features, along with their ratio. Based on these metrics, our findings suggest that a minimum E11*/E11 ratio of 3 is recommended for the transformation of a standard nanosensor into a ratiometric nanosensor via the incorporation of quantum defects into the pristine structure of a single-chirality SWCNT. The results herein underscore new, chemically enabled methods of improving CoPhMoRe sensors by the induction of quantum defects and use of chirality sorted SWCNTs.


  • A Computational Glucoregulatory Model of Liver and Glucagon for the Evaluation of Therapeutics

    by Xun Gong, Ali A. Alizadehmojarad, Marco Machado, Sungyun Yang, Michael S. Strano

    Computational models of the glucoregulatory system constitute a powerful tool for preclinical evaluation and mechanistic insight into therapeutics. However, in the case of diabetes, there is a dearth of physiological models capable of accurately describing the hormone glucagon, which is important for the study and design of new classes of therapeutics, such as glucose-responsive glucagon (GRG). In this work, we construct a physiological compartment model, IMPACT 2.0, which integrates a refined liver submodel and explicit whole-body glucagon kinetics. Key mechanistic enhancements include glucose transporter dynamics, receptor binding, and hepatic glycogen metabolism, allowing for the improved prediction of glucose excursions in response to both insulin- and glucagon-based therapeutics. Model validation against experimental data from healthy and diabetic rats demonstrated accurate glucose predictions following insulin and glucagon administration. Sensitivity analysis was used to evaluate our model's identifiability in the case of insulin or glucagon subcutaneous injections. By comparing diabetic and healthy model fits, we found that 16 of the 37 fitting parameters were significantly different between the health states. Additionally, we applied IMPACT 2.0 to evaluate a recently developed GRG based on controlled release via a microneedle patch, illustrating its utility in mechanistic drug design and bridging in vitro characterization with physiological outcomes. By offering a physiologically detailed and validated framework for glucagon and liver metabolism, IMPACT 2.0 is an improved pharmacokinetic and pharmacodynamic model that will be valuable for accelerating drug discovery, optimizing GRG formulations, and informing the design of closed-loop insulin and glucagon therapeutics.


  • Guanine Functionalization of Single-Wall Carbon Nanotubes: A Quantum Chemical Study

    by Ali A. Alizadehmojarad, Sergei M. Bachilo, R. Bruce Weisman

    The guanine functionalization reaction uses singlet oxygen to covalently link single-wall carbon nanotubes to guanine bases in ssDNA coatings. This creates shallow but densely spaced exciton traps that modulate nanotube band gaps with energetic and spatial control, giving red-shifted electronic transitions. To better understand guanine functionalization, we used quantum chemical computations to compare the stabilities of several candidate addends in multiple orientations on the nanotube surface. Structures of three possible isomers of guanine peroxide (GPO), the reactive intermediate formed through reaction of 9-methyl guanine with singlet O2, were optimized using the semiempirical PM3 method. To examine effects of nanotube diameter on adduct stability, we then computed the enthalpy changes for bonding of each GPO isomer to a 6 nm segment of (5,4), (6,5), (7,6), and (8,7) single-wall carbon nanotubes (SWCNTs). Six orientations of the addend on the SWCNT surface were considered for each (n,m) species, giving a total of 72 adduct structures. The results showed that for all four SWCNTs, the most energetically stable adduct is the 4,5-GPO isomer bonded in the ortho L-30 orientation. This adduct can be considered to be a derivative of 1,4-dioxane. Subsequent ab initio DFT and TDDFT computations comparing bonding orientations of one guanine addend on a 12 nm long SWCNT segment found that ortho L-30 gives a slightly reduced HOMO-LUMO gap, a moderately localized exciton structure, and a slightly red-shifted E11 optical transition as compared to the pristine SWCNT, in agreement with experiment. We conclude that guanine functionalization of near-armchair SWCNTs leads mainly to 4,5-GPO addends bonded in the ortho L-30 orientation.


  • A Nanosensor Platform for Biologging in Marine Animals

    by Xiaojia Jin, Ali A. Alizadehmojarad, Volodymyr B. Koman, Gabriel Sánchez-Velázquez, Manki Son, Rory Wilson, Mark Meekan, Carlos M. Duarte, Michael S. Strano

    Biologging has significantly advanced ecological biology by enabling the collection of data from free-roaming animals in their natural habitats. Traditionally, these measurements have largely been limited to temperature, pressure, and movement. Incorporating physiological data of animal biomarkers could yield valuable orthogonal data sets, providing a more nuanced understanding of organisms in the context of their environments and behaviors. Despite this potential, successful collection of such biochemical information remains absent and thus motivates new sensor platforms. Toward this end, we explore the hardware and nanosensor optimization of animal implantable sensors for tracking hormone levels in marine animals. The transducer element is based on polymer-wrapped single-walled carbon nanotubes that act as nanosensors embedded within a biocompatible poly(ethylene glycol) diacrylate hydrogel. This work investigates the performance of the nanosensor hydrogel under various temperatures, illumination conditions, and nanoparticle concentrations in the hydrogel. We further prototype a miniaturized fluorescent system for integration into existing, commercially available acoustic tags widely used in marine biology studies. We demonstrate a baseline of 100 nM for the detection limit of progesterone as an example of an important hormone in marine animals using the integrated nanosensor hydrogel in this platform. Further improvement is possible with optimization of the signal-to-noise ratio via hardware development. This developed form-factor will complement the presently collected data by providing insights into the physiological state of the animals in the context of their behavior and environments.


  • 1H NMR Trajectories for Analyzing the Growth and Purification of 2D Polyaramids

    by Zitang Wei, Yu-Ming Tu, Wonjun Yim, Michelle Quien, Ali A. Alizadehmojarad, Xun Gong, Michael S. Strano

    The recent synthesis of two-dimensional (2D) polyaramid (PA) polymers has shown that they exhibit remarkable mechanical and gas barrier properties. However, new methods are necessary to enable the efficient measurement of discoidal sizes of 2D polyaramids and tracking of their growth over time during reaction. Herein, we employ 1H NMR peak analysis of the aromatic and proton end group regions to characterize 2D-PA growth from monomeric precursors, alongside purification using two-stage filtration and washing steps. The ratio of aromatic to end group protons yields the molecular weight and discoidal size, while the skewness of the NMR peaks in the aromatic region provides a relative weighting between dendritic, small, and larger polycyclic domains. These two metrics delineate a distinct two-dimensional 1H NMR trajectory that we show to be valuable for analyzing the results of differing synthetic and processing conditions. Theoretical bounds corresponding to dendrimer and polycyclic limits as a function of repeat unit size are derived as an aid in trajectory analysis. These results establish an analytical framework for evaluating 2D-PA and its variants, facilitating the exploration of the synthetic landscape.


  • Sequence-Dependent Surface Coverage of ssDNA Coatings on Single-Wall Carbon Nanotubes

    by Ali A. Alizadehmojarad, Sergei M. Bachilo, R. Bruce Weisman

    A combination of experimental measurements and molecular dynamics (MD) simulations was used to investigate how the surfaces of single-wall carbon nanotubes (SWCNTs) are covered by adsorbed ssDNA oligos with different base compositions and lengths. By analyzing the UV absorption spectra of ssDNA-coated SWCNTs before and after coating displacement by a transparent surfactant, the mass ratios of adsorbed ssDNA to SWCNTs were determined for poly-T, poly-C, GT-containing, and AT-containing ssDNA oligos. Based on the measured mass ratios, it is estimated that an average of 20, 22, 26, or 32 carbon atoms are covered by one adsorbed thymine, cytosine, adenine, or guanine nucleotide, respectively. In addition, the UV spectra revealed electronic interactions of varying strengths between the nucleobase aromatic rings and the nanotube pi-systems. Short poly-T DNA oligos show stronger pi-pi stacking interactions with SWCNT surfaces than do short poly-C DNA oligos, whereas both long poly-C and poly-T DNA oligos show strong interactions. These experiments were complemented by MD computations on simulated systems that were constrained to match the measured ssDNA/SWCNT mass ratios. The surface coverages computed from the MD results varied with oligo composition in a pattern that correlates higher measured yields of nanotube fluorescence with greater surface coverage.