Tae-Hyung Kim
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Tae-Hyung Kim has a total of 53 co-authors. Here are the top co-authors by number of shared publications:
- Zong Woo Geem
Department of Smart City, Gachon University, Seongnam 13120, Republic of Korea
4 shared publications - Reza Mikaeil
Department of Mining Engineering, Environment Faculty, Urmia University of Technology (UUT), Urmia, Iran
2 shared publications - Sina Shaffiee Haghshenas
Department of Civil Engineering, University of Calabria, Rende, Italy
2 shared publications Woong-Ki Hwang
2 shared publications- Young-Suk Song
Geo-Environmental Hazard Research Center, Geologic Environment Division, Korea Institute of Geoscience and Mineral Resources, Daejeon 34132, Korea
2 shared publications - Ahmad Taheri
Institute for Computational Systems Biomedicine, University of Hamburg, Hamburg, Germany
1 shared publication
Latest Publications
- 15 June 2026
- Published by Taylor & Francis in Marine Georesources & Geotechnology
- Vol. 44 (9) , 1-18
Influence of tilt and misorientation on suction anchor pullout capacity for floating offshore wind turbines
- 15 June 2026
- Published by Taylor & Francis in Marine Georesources & Geotechnology
- Vol. 44 (9) , 1-18
Influence of tilt and misorientation on suction anchor pullout capacity for floating offshore wind turbines
- Open Access
- 2 June 2025
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 37 (3) , 69-82
A Case Study on Long-term Groundwater Level Measurement Method and Water Level Fluctuation Characteristics in Coastal Landfill
In this study, the long-term groundwater level measurement method and three-month groundwater level fluctuation characteristics in the coastal landfill were conducted. The long-term groundwater measurement system consists of a lower cap, non-porous pipe, strainer, and protection box, and a pressure-type water level gauge (TD Diver) with its own built-in battery is recommended. As a result of long-term groundwater level measurements at coastal landfill sites in the same area, there was significant variation in groundwater levels due to topographical or geological factors, tide, rainfall, and landfill materials or existed underground structures. The effect of tide level is different for each location, and that is not significant if it is located very close to the coast. Rising water levels were observed at all sites following rainfall. However, the amount of increase in groundwater level and the rate of rise and fall over time differ greatly for each site. Since the groundwater level is an important factor related to water leakage in the earth retaining wall and impervious barrier of coastal landfills, we recommend measurements for at least three months, equivalent to one quarter, and a design that reflects this.
- 2 June 2025
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 37 (3) , 69-82
Open AccessA Case Study on Long-term Groundwater Level Measurement Method and Water Level Fluctuation Characteristics in Coastal Landfill
In this study, the long-term groundwater level measurement method and three-month groundwater level fluctuation characteristics in the coastal landfill were conducted. The long-term groundwater measurement system consists of a lower cap, non-porous pipe, strainer, and protection box, and a pressure-type water level gauge (TD Diver) with its own built-in battery is recommended. As a result of long-term groundwater level measurements at coastal landfill sites in the same area, there was significant variation in groundwater levels due to topographical or geological factors, tide, rainfall, and landfill materials or existed underground structures. The effect of tide level is different for each location, and that is not significant if it is located very close to the coast. Rising water levels were observed at all sites following rainfall. However, the amount of increase in groundwater level and the rate of rise and fall over time differ greatly for each site. Since the groundwater level is an important factor related to water leakage in the earth retaining wall and impervious barrier of coastal landfills, we recommend measurements for at least three months, equivalent to one quarter, and a design that reflects this.
- Open Access
- 16 January 2025
- Published by MDPI AG in Information
- Vol. 16 (1) , 60
Shear Wave Velocity Prediction with Hyperparameter Optimization
Shear wave velocity (Vs) is an important soil parameter to be known for earthquake-resistant structural design and an important parameter for determining the dynamic properties of soils such as modulus of elasticity and shear modulus. Different Vs measurement methods are available. However, these methods, which are costly and labor intensive, have led to the search for new methods for determining the Vs. This study aims to predict shear wave velocity (Vs (m/s)) using depth (m), cone resistance (qc) (MPa), sleeve friction (fs) (kPa), pore water pressure (u2) (kPa), N, and unit weight (kN/m3). Since shear wave velocity varies with depth, regression studies were performed at depths up to 30 m in this study. The dataset used in this study is an open-source dataset, and the soil data are from the Taipei Basin. This dataset was extracted, and a 494-line dataset was created. In this study, using HyperNetExplorer 2024V1, Vs prediction based on depth (m), cone resistance (qc) (MPa), shell friction (fs), pore water pressure (u2) (kPa), N, and unit weight (kN/m3) values could be performed with satisfactory results (R2 = 0.78, MSE = 596.43). Satisfactory results were obtained in this study, in which Explainable Artificial Intelligence (XAI) models were also used.
- 16 January 2025
- Published by MDPI AG in Information
- Vol. 16 (1) , 60
Open AccessShear Wave Velocity Prediction with Hyperparameter Optimization
Shear wave velocity (Vs) is an important soil parameter to be known for earthquake-resistant structural design and an important parameter for determining the dynamic properties of soils such as modulus of elasticity and shear modulus. Different Vs measurement methods are available. However, these methods, which are costly and labor intensive, have led to the search for new methods for determining the Vs. This study aims to predict shear wave velocity (Vs (m/s)) using depth (m), cone resistance (qc) (MPa), sleeve friction (fs) (kPa), pore water pressure (u2) (kPa), N, and unit weight (kN/m3). Since shear wave velocity varies with depth, regression studies were performed at depths up to 30 m in this study. The dataset used in this study is an open-source dataset, and the soil data are from the Taipei Basin. This dataset was extracted, and a 494-line dataset was created. In this study, using HyperNetExplorer 2024V1, Vs prediction based on depth (m), cone resistance (qc) (MPa), shell friction (fs), pore water pressure (u2) (kPa), N, and unit weight (kN/m3) values could be performed with satisfactory results (R2 = 0.78, MSE = 596.43). Satisfactory results were obtained in this study, in which Explainable Artificial Intelligence (XAI) models were also used.
- Open Access
- 30 April 2023
- Published by Korea Institute of Fire Science and Engineering in Fire Science and Engineering
- Vol. 37 (2) , 75-80
Review of Ultrasonic Pulse Methods for Evaluation of Mechanical Properties of Concrete with Different Percentages of Non-sintered Hwangto at High Temperature
- 30 April 2023
- Published by Korea Institute of Fire Science and Engineering in Fire Science and Engineering
- Vol. 37 (2) , 75-80
Open AccessReview of Ultrasonic Pulse Methods for Evaluation of Mechanical Properties of Concrete with Different Percentages of Non-sintered Hwangto at High Temperature
- 2 September 2022
- Published by Springer Nature
- p. 13-23
Quantitative and Qualitative Analysis of Harmony Search Algorithm in Geomechanics and Its Applications
- 2 September 2022
- Published by Springer Nature
- p. 13-23
Quantitative and Qualitative Analysis of Harmony Search Algorithm in Geomechanics and Its Applications
- Open Access
- 16 August 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (4) , 100-108
A Study of Lateral Resistance of Block Breakwater Combined with Piles
- 16 August 2022
- Published by Korean Society of Coastal and Ocean Engineers in Journal of Korean Society of Coastal and Ocean Engineers
- Vol. 34 (4) , 100-108
Open AccessA Study of Lateral Resistance of Block Breakwater Combined with Piles
- Open Access
- 22 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (13) , 6339
A Fully-Self-Adaptive Harmony Search GMDH-Type Neural Network Algorithm to Estimate Shear-Wave Velocity in Porous Media
Shear wave velocity (VS) is one of the most important parameters in deep and surface studies and the estimation of geotechnical design parameters. This parameter is widely utilized to determine permeability and porosity, lithology, rock mechanical parameters, and fracture assessment. However, measuring this important parameter is either impossible or difficult due to the challenges related to horizontal and deviation wells or the difficulty in reaching cores. Artificial Intelligence (AI) techniques, especially Machine Learning (ML), have emerged as efficient approaches for dealing with such challenges. Therefore, considering the advantage of the ML, the current research proposes a novel Fully-Self-Adaptive Harmony Search—Group Method of Data Handling (GMDH)-type neural network, named FSHS-GMDH, to estimate the VS parameter. In this way, the Harmony Memory Consideration Rate (HMCR) and Pitch Adjustment Rate (PAR) parameters are calculated automatically. A novel method is also introduced to adjust the value of the Bandwidth (BW) parameter based on the cosine wave and each decision variable values. In addition, a variable-size harmony memory is proposed to enhance both the diversification and intensification. Our proposed FSHS-GMDH algorithm quickly explores the problem space and exploits the best regions at the late iterations. This algorithm allows for the training of the prediction model based on the P-wave velocity (VP) and the bulk density of rock (RHOB). Applying the proposed algorithm to a carbonate petroleum reservoir in the Persian Gulf demonstrates that it is capable of accurately estimating the VS parameter better than state-of-the-art machine learning methods in terms of the coefficient of determination (R2), Mean Square Error (MSE), and Root Mean Square Error (RMSE).
- 22 June 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (13) , 6339
Open AccessA Fully-Self-Adaptive Harmony Search GMDH-Type Neural Network Algorithm to Estimate Shear-Wave Velocity in Porous Media
Shear wave velocity (VS) is one of the most important parameters in deep and surface studies and the estimation of geotechnical design parameters. This parameter is widely utilized to determine permeability and porosity, lithology, rock mechanical parameters, and fracture assessment. However, measuring this important parameter is either impossible or difficult due to the challenges related to horizontal and deviation wells or the difficulty in reaching cores. Artificial Intelligence (AI) techniques, especially Machine Learning (ML), have emerged as efficient approaches for dealing with such challenges. Therefore, considering the advantage of the ML, the current research proposes a novel Fully-Self-Adaptive Harmony Search—Group Method of Data Handling (GMDH)-type neural network, named FSHS-GMDH, to estimate the VS parameter. In this way, the Harmony Memory Consideration Rate (HMCR) and Pitch Adjustment Rate (PAR) parameters are calculated automatically. A novel method is also introduced to adjust the value of the Bandwidth (BW) parameter based on the cosine wave and each decision variable values. In addition, a variable-size harmony memory is proposed to enhance both the diversification and intensification. Our proposed FSHS-GMDH algorithm quickly explores the problem space and exploits the best regions at the late iterations. This algorithm allows for the training of the prediction model based on the P-wave velocity (VP) and the bulk density of rock (RHOB). Applying the proposed algorithm to a carbonate petroleum reservoir in the Persian Gulf demonstrates that it is capable of accurately estimating the VS parameter better than state-of-the-art machine learning methods in terms of the coefficient of determination (R2), Mean Square Error (MSE), and Root Mean Square Error (RMSE).
- Open Access
Application of Harmony Search Algorithm to Slope Stability Analysis
Slope stability analysis is undoubtedly one of the most complex problems in geotechnical engineering and its study plays a paramount role in mitigating the risk associated with the occurrence of a landslide. This problem is commonly tackled by using limit equilibrium methods or advanced numerical techniques to assess the slope safety factor or, sometimes, even the displacement field of the slope. In this study, as an alternative approach, an attempt to assess the stability condition of homogeneous slopes was made using a machine learning (ML) technique. Specifically, a meta-heuristic algorithm (Harmony Search (HS) algorithm) and K-means algorithm were employed to perform a clustering analysis by considering two different classes, depending on whether a slope was unstable or stable. To achieve the purpose of this study, a database made up of 19 case studies with 6 model inputs including unit weight, intercept cohesion, angle of shearing resistance, slope angle, slope height and pore pressure ratio and one output (i.e., the slope safety factor) was established. Referring to this database, 17 out of 19 slopes were categorized correctly. Moreover, the obtained results showed that, referring to the considered database, the intercept cohesion was the most significant parameter in defining the class of each slope, whereas the unit weight had the smallest influence. Finally, the obtained results showed that the Harmony Search algorithm is an efficient approach for training K-means algorithms.
Open AccessApplication of Harmony Search Algorithm to Slope Stability Analysis
Slope stability analysis is undoubtedly one of the most complex problems in geotechnical engineering and its study plays a paramount role in mitigating the risk associated with the occurrence of a landslide. This problem is commonly tackled by using limit equilibrium methods or advanced numerical techniques to assess the slope safety factor or, sometimes, even the displacement field of the slope. In this study, as an alternative approach, an attempt to assess the stability condition of homogeneous slopes was made using a machine learning (ML) technique. Specifically, a meta-heuristic algorithm (Harmony Search (HS) algorithm) and K-means algorithm were employed to perform a clustering analysis by considering two different classes, depending on whether a slope was unstable or stable. To achieve the purpose of this study, a database made up of 19 case studies with 6 model inputs including unit weight, intercept cohesion, angle of shearing resistance, slope angle, slope height and pore pressure ratio and one output (i.e., the slope safety factor) was established. Referring to this database, 17 out of 19 slopes were categorized correctly. Moreover, the obtained results showed that, referring to the considered database, the intercept cohesion was the most significant parameter in defining the class of each slope, whereas the unit weight had the smallest influence. Finally, the obtained results showed that the Harmony Search algorithm is an efficient approach for training K-means algorithms.
- Open Access
- 24 August 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 919
Lateral and Overturning Resistance of Wind Turbine Foundations Reinforced with Piles on Bedrock by Modelling Experiments
This study evaluated the lateral and overturning resistance of wind turbine foundations reinforced with piles on bedrock through model experiments. In particular, changes in lateral and overturning resistance of wind turbine foundations were analyzed according to cross-sectional size and the presence of piles of wind turbine foundations. As a result, by reducing the cross-section, the lateral resistance of the pile-reinforced wind turbine foundation was compared to the existing wind turbine foundation with large cross-sections and was shown to be 1.68 times greater. In the case of vertical displacements affecting overturning, the safety of overturning was also greater, as the vertical displacement of the pile-reinforced wind turbine foundation was 36% smaller than the existing wind turbine foundation. As a result of the unidirectional cyclic load on a pile-reinforced wind turbine foundation, lateral resistance value was similar to that of the static load in target displacement value, and it showed that the elastic resilience was very large due to pile reinforcement. According to the bending moment measurement of piles embedded in wind turbine foundations and bedrock, bending moments were large in the order of the front row, the right-hand row, and the back row, while the maximum bending moment generation was found on the boundary surface of the wind turbine foundation and the rubble mound layer for the front row, as well as on the boundary surface of the rubble mound layer and bedrock for the right-hand row and back row.
- 24 August 2021
- Published by MDPI AG in Journal of Marine Science and Engineering
- Vol. 9 (9) , 919
Open AccessLateral and Overturning Resistance of Wind Turbine Foundations Reinforced with Piles on Bedrock by Modelling Experiments
This study evaluated the lateral and overturning resistance of wind turbine foundations reinforced with piles on bedrock through model experiments. In particular, changes in lateral and overturning resistance of wind turbine foundations were analyzed according to cross-sectional size and the presence of piles of wind turbine foundations. As a result, by reducing the cross-section, the lateral resistance of the pile-reinforced wind turbine foundation was compared to the existing wind turbine foundation with large cross-sections and was shown to be 1.68 times greater. In the case of vertical displacements affecting overturning, the safety of overturning was also greater, as the vertical displacement of the pile-reinforced wind turbine foundation was 36% smaller than the existing wind turbine foundation. As a result of the unidirectional cyclic load on a pile-reinforced wind turbine foundation, lateral resistance value was similar to that of the static load in target displacement value, and it showed that the elastic resilience was very large due to pile reinforcement. According to the bending moment measurement of piles embedded in wind turbine foundations and bedrock, bending moments were large in the order of the front row, the right-hand row, and the back row, while the maximum bending moment generation was found on the boundary surface of the wind turbine foundation and the rubble mound layer for the front row, as well as on the boundary surface of the rubble mound layer and bedrock for the right-hand row and back row.
- Open Access
- 9 January 2021
- Published by Springer Nature in International Journal of Geo-Engineering
- Vol. 12 (1) , 1-5
Neutralization effect of slag on the acid rock drainage
Aims/hypothesis: Pohang Tertiary mudstone presents the issue of acid rock drainage. This study analyzed the capacity of a mixed slag (70% steel slag + 30% blast furnace slag) to neutralize Pohang Tertiary mudstone’s acid rock drainage. Methods: Element analysis, acid neutralization capacity (ANC) test, and net acid generation (NAG) test were conducted on Pohang Tertiary mudstone samples and the mixed slag. The XRF analysis and the XRD analysis on the mixed slag were conducted to measure the CaO content, which indicates the potential of the mixed slag as an acid-neutralizing agent. Results: According to the analysis results on the Pohang Tertiary mudstone samples, the total sulfur content was high, which indicates a high risk of acid rock drainage generation. Although there were slight deviations between the samples, overall, the mudstone exhibited a high acid rock drainage generation capacity. The XRF analysis of mixed slag results showed high amounts of CaO content. From the XRD analysis graph, it was clear that a high proportion of minerals with Ca- compounds consisting of basic substances were present. The neutralization capacity of the mixed slag on Pohang Tertiary mudstone was determined by the relationship between maximum potential acidity (MPA) and acid neutralization capacity (ANC). For instance, the mixed slag of 4.5% effectively neutralizes a sulfur content of 1%.
- 9 January 2021
- Published by Springer Nature in International Journal of Geo-Engineering
- Vol. 12 (1) , 1-5
Open AccessNeutralization effect of slag on the acid rock drainage
Aims/hypothesis: Pohang Tertiary mudstone presents the issue of acid rock drainage. This study analyzed the capacity of a mixed slag (70% steel slag + 30% blast furnace slag) to neutralize Pohang Tertiary mudstone’s acid rock drainage. Methods: Element analysis, acid neutralization capacity (ANC) test, and net acid generation (NAG) test were conducted on Pohang Tertiary mudstone samples and the mixed slag. The XRF analysis and the XRD analysis on the mixed slag were conducted to measure the CaO content, which indicates the potential of the mixed slag as an acid-neutralizing agent. Results: According to the analysis results on the Pohang Tertiary mudstone samples, the total sulfur content was high, which indicates a high risk of acid rock drainage generation. Although there were slight deviations between the samples, overall, the mudstone exhibited a high acid rock drainage generation capacity. The XRF analysis of mixed slag results showed high amounts of CaO content. From the XRD analysis graph, it was clear that a high proportion of minerals with Ca- compounds consisting of basic substances were present. The neutralization capacity of the mixed slag on Pohang Tertiary mudstone was determined by the relationship between maximum potential acidity (MPA) and acid neutralization capacity (ANC). For instance, the mixed slag of 4.5% effectively neutralizes a sulfur content of 1%.