Gioacchino Tricarico
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Gioacchino Tricarico has a total of 24 co-authors. Here are the top co-authors by number of shared publications:
- Giuseppe Forte
Department of Electrical and Information Engineering, Politecnico di Bari, Bari, Italy
5 shared publications - Maria Dicorato
Department of Electrical and Information Engineering, Politecnico di Bari, Bari, Italy
5 shared publications - Francisco Gonzalez-Longatt
Department of Electrical Engineering, Information Technology and Cybernetics, University of South-Eastern Norway, Porsgrunn, Norway
4 shared publications - Francesca Marasciuolo
Department of Electrical and Information Engineering, Politecnico di Bari, Bari, Italy
3 shared publications Giuseppe Forte
3 shared publicationsMaria Dicorato
3 shared publications
Latest Publications
- Open Access
- 22 June 2026
- Published by Elsevier in Electric Power Systems Research
- Vol. 261
A reactive power compensation strategy for offshore wind farms to achieve grid code capabilities
- 22 June 2026
- Published by Elsevier in Electric Power Systems Research
- Vol. 261
Open AccessA reactive power compensation strategy for offshore wind farms to achieve grid code capabilities
- Open Access
A Two-Stage Energy and Service Market Framework Involving Unit Commitment and Network-Based Redispatch
The provision of power and grid services requires the co-ordination between Day-Ahead Market (DAM) and Ancillary Service Market (ASM) to attain reserve services and technically feasible operating conditions for market players and for the network. In this context, this work proposes a multi-stage approach to evaluate the dispatched power to balance the forecast updates of renewable energy sources and load from DAM to ASM, taking into account network and Unit Commitment (UC) constraints. The DAM is solved considering a zonal market framework and neglecting the UC constraints. Then, a mechanism to adjust the ASM bids is developed, defining time-varying costs for each regulation. Finally, the ASM is modelled as a network-constrained UC and economic redispatch (NCUCER) optimization problem, aiming at minimizing the overall cost, in order to procure secondary reserve requirement and to adjust the DAM schedules, taking into account network and UC constraints and balancing forecast updates. DC load flow sensitivity factors are exploited to evaluate the influence of redispatch actions and forecast updates on the observed power flow. This procedure is applied to NREL 118-Bus Test System assessing its performances throughout a yearly time horizon.
Open AccessA Two-Stage Energy and Service Market Framework Involving Unit Commitment and Network-Based Redispatch
The provision of power and grid services requires the co-ordination between Day-Ahead Market (DAM) and Ancillary Service Market (ASM) to attain reserve services and technically feasible operating conditions for market players and for the network. In this context, this work proposes a multi-stage approach to evaluate the dispatched power to balance the forecast updates of renewable energy sources and load from DAM to ASM, taking into account network and Unit Commitment (UC) constraints. The DAM is solved considering a zonal market framework and neglecting the UC constraints. Then, a mechanism to adjust the ASM bids is developed, defining time-varying costs for each regulation. Finally, the ASM is modelled as a network-constrained UC and economic redispatch (NCUCER) optimization problem, aiming at minimizing the overall cost, in order to procure secondary reserve requirement and to adjust the DAM schedules, taking into account network and UC constraints and balancing forecast updates. DC load flow sensitivity factors are exploited to evaluate the influence of redispatch actions and forecast updates on the observed power flow. This procedure is applied to NREL 118-Bus Test System assessing its performances throughout a yearly time horizon.
- 21 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (2) , 1946-1957
Sizing and Siting of Energy Storage Systems for Mitigating Forecast Mismatch in Transmission Grid
The rise of renewable energy sources (RESs) and load demand implies the research of suitable solutions to improve the operation of transmission systems. The accelerated development of battery technologies heightens interest in installing battery energy storage systems (BESSs) for the provision of different grid-support services to transmission networks. In this context, the present paper proposes a methodology to size and site BESSs on a transmission system to face RESs and load mismatches. The approach involves an analytic hierarchy process to rank a set of candidate buses, and a time-series hosting capacity analysis to determine the maximum BESS size at each node. Furthermore, BESS operation's potential revenue along with network benefits, through a centralised control strategy, are assessed. The method is tested on an IEEE 39-bus system modified version.
- 21 January 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 61 (2) , 1946-1957
Sizing and Siting of Energy Storage Systems for Mitigating Forecast Mismatch in Transmission Grid
The rise of renewable energy sources (RESs) and load demand implies the research of suitable solutions to improve the operation of transmission systems. The accelerated development of battery technologies heightens interest in installing battery energy storage systems (BESSs) for the provision of different grid-support services to transmission networks. In this context, the present paper proposes a methodology to size and site BESSs on a transmission system to face RESs and load mismatches. The approach involves an analytic hierarchy process to rank a set of candidate buses, and a time-series hosting capacity analysis to determine the maximum BESS size at each node. Furthermore, BESS operation's potential revenue along with network benefits, through a centralised control strategy, are assessed. The method is tested on an IEEE 39-bus system modified version.
- Open Access
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 150914-150929
Real-Time Cyber-Physical Power System Testbed for Optimal Power Flow Study Using Co-Simulation Framework
Today’s power system is transforming into an increasingly complex entity, consisting of numerous components, such as transmission lines, controllable loads, and especially different types of distributed renewable energy sources (DERs). With the growing integration of DERs into the grid, multiple operational challenges arise, including overvoltage, undervoltage, or increased energy losses. Resolving these issues demands the implementation of both advanced and effective control strategies. As the dynamic power system evolves by incorporating new technologies, these control strategies need to consider other different technical aspects, such as communication protocols or real-time considerations. Additionally, the rise of smart metering devices has transformed conventional power systems into cyber-physical power systems (CPPS), which can integrate the advanced control strategies into the cyber layer. Given the operating challenges and the integration of diverse technologies, it is proposed that a CPPS testbed platform constitutes an ideal solution for developing and validating technologies in future smart grids. For this purpose, this paper introduces a co-simulation framework for implementing a CPPS testbed, utilising the real-time simulator, Typhoon HIL, within a laboratory environment. Additionally, it presents a proposed optimal power flow (OPF) control strategy that emphasises two key objectives, minimisation of operating costs and power network loss. The investigation is illustrated by a modified version of IEEE 39-bus test system with the high integration of DERs. The findings indicate that adopting a CPPS testbed can be advantageous for implementing real-time research on monitoring and control in a wide area network.
- 3 October 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 12, 150914-150929
Open AccessReal-Time Cyber-Physical Power System Testbed for Optimal Power Flow Study Using Co-Simulation Framework
Today’s power system is transforming into an increasingly complex entity, consisting of numerous components, such as transmission lines, controllable loads, and especially different types of distributed renewable energy sources (DERs). With the growing integration of DERs into the grid, multiple operational challenges arise, including overvoltage, undervoltage, or increased energy losses. Resolving these issues demands the implementation of both advanced and effective control strategies. As the dynamic power system evolves by incorporating new technologies, these control strategies need to consider other different technical aspects, such as communication protocols or real-time considerations. Additionally, the rise of smart metering devices has transformed conventional power systems into cyber-physical power systems (CPPS), which can integrate the advanced control strategies into the cyber layer. Given the operating challenges and the integration of diverse technologies, it is proposed that a CPPS testbed platform constitutes an ideal solution for developing and validating technologies in future smart grids. For this purpose, this paper introduces a co-simulation framework for implementing a CPPS testbed, utilising the real-time simulator, Typhoon HIL, within a laboratory environment. Additionally, it presents a proposed optimal power flow (OPF) control strategy that emphasises two key objectives, minimisation of operating costs and power network loss. The investigation is illustrated by a modified version of IEEE 39-bus test system with the high integration of DERs. The findings indicate that adopting a CPPS testbed can be advantageous for implementing real-time research on monitoring and control in a wide area network.
- Open Access
- 30 October 2023
- Published by Springer Nature in Electrical Engineering
- Vol. 106 (3) , 2391-2405
Co-simulation-based optimal reactive power control in smart distribution network
The increasing integration of distributed energy resources such as photovoltaic (PV) systems into distribution networks introduces intermittent and variable power, leading to high voltage fluctuations. High PV integration can also result in increased terminal voltage of the network during periods of high PV generation and low load consumption. These problems can be solved by optimal utilization of the reactive power capability of a smart inverter. However, solving the optimization problem using a detailed mathematical model of the distribution network may be time-consuming. Due to this, the optimization process may not be fast enough to incorporate this rapid fluctuation when implemented in real-time optimization. To address these issues, this paper proposes a co-simulation-based optimization approach for optimal reactive power control in smart inverters. By utilizing co-simulation, the need for detailed mathematical modeling of the power flow equation of the distribution network in the optimization model is eliminated, thereby enabling faster optimization. This paper compares three optimization algorithms (improved harmony search, simplicial homology global optimization, and differential evolution) using models developed in OpenDSS and DigSilent PowerFactory. The results demonstrate the suitability of the proposed co-simulation-based optimization for obtaining optimal setpoints for reactive power control, minimizing total power loss in distribution networks with high PV integration. This research paper contributes to efficient and practical solutions for modeling optimal control problems in future distribution networks.
- 30 October 2023
- Published by Springer Nature in Electrical Engineering
- Vol. 106 (3) , 2391-2405
Open AccessCo-simulation-based optimal reactive power control in smart distribution network
The increasing integration of distributed energy resources such as photovoltaic (PV) systems into distribution networks introduces intermittent and variable power, leading to high voltage fluctuations. High PV integration can also result in increased terminal voltage of the network during periods of high PV generation and low load consumption. These problems can be solved by optimal utilization of the reactive power capability of a smart inverter. However, solving the optimization problem using a detailed mathematical model of the distribution network may be time-consuming. Due to this, the optimization process may not be fast enough to incorporate this rapid fluctuation when implemented in real-time optimization. To address these issues, this paper proposes a co-simulation-based optimization approach for optimal reactive power control in smart inverters. By utilizing co-simulation, the need for detailed mathematical modeling of the power flow equation of the distribution network in the optimization model is eliminated, thereby enabling faster optimization. This paper compares three optimization algorithms (improved harmony search, simplicial homology global optimization, and differential evolution) using models developed in OpenDSS and DigSilent PowerFactory. The results demonstrate the suitability of the proposed co-simulation-based optimization for obtaining optimal setpoints for reactive power control, minimizing total power loss in distribution networks with high PV integration. This research paper contributes to efficient and practical solutions for modeling optimal control problems in future distribution networks.
- Open Access
- 1 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 86-90
Zonal Day-Ahead Energy Market: A Modified Version of the IEEE 39-bus Test System
The increasing penetration of renewable energy resources (RES) in transmission system operating conditions require a suitable test system and a dataset to cope with current issues. RES penetration remarkably affects day-ahead market outcomes regarding zonal prices and dispatched generation levels. For this purpose, zonal day-ahead energy market models in the presence of RES in the generation mix need to be implemented. In this paper, the IEEE 39-bus system has been suitably modified to include solar and wind generation in the traditional generation mix. Hourly time series are used to define load profiles and wind and solar power generation. The zonal day-ahead market (ZDAM) resolution is simulated by solving a Linear Programming optimization problem employing Pyomo. Furthermore, steady-state nodal analysis is carried out using DIgSILENT PowerFactory, performed over a year horizon.
- 1 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 86-90
Open AccessZonal Day-Ahead Energy Market: A Modified Version of the IEEE 39-bus Test System
The increasing penetration of renewable energy resources (RES) in transmission system operating conditions require a suitable test system and a dataset to cope with current issues. RES penetration remarkably affects day-ahead market outcomes regarding zonal prices and dispatched generation levels. For this purpose, zonal day-ahead energy market models in the presence of RES in the generation mix need to be implemented. In this paper, the IEEE 39-bus system has been suitably modified to include solar and wind generation in the traditional generation mix. Hourly time series are used to define load profiles and wind and solar power generation. The zonal day-ahead market (ZDAM) resolution is simulated by solving a Linear Programming optimization problem employing Pyomo. Furthermore, steady-state nodal analysis is carried out using DIgSILENT PowerFactory, performed over a year horizon.
- 15 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (3) , 3957-3966
The Influence of EV Usage Scenarios on DC Microgrid Techno-Economic Operation
Electric vehicle supply infrastructures represent a valid mean to integrate and encourage electric mobility, ensuring safe integration of electric vehicle (EV), renewable sources, and controllable devices. Management of these infrastructures under DC microgrid framework is affected by EV usage pattern, involving stochastic features, and by vehicle-to-grid ability, yielding the need of suitable operation strategy assessment. This article is focused on the analyses of day-ahead performances of a DC microgrid based on the solution of different optimization algorithms, involving technical and economic targets. The study involves statistical analyses concerning EVs usage, based on historical dataset, with the aim to generate scenarios to be investigated. Performances are compared by means of technical and economic indicators. The considered layout of DC microgrid refers to a realistic installation.
- 15 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industry Applications
- Vol. 58 (3) , 3957-3966
The Influence of EV Usage Scenarios on DC Microgrid Techno-Economic Operation
Electric vehicle supply infrastructures represent a valid mean to integrate and encourage electric mobility, ensuring safe integration of electric vehicle (EV), renewable sources, and controllable devices. Management of these infrastructures under DC microgrid framework is affected by EV usage pattern, involving stochastic features, and by vehicle-to-grid ability, yielding the need of suitable operation strategy assessment. This article is focused on the analyses of day-ahead performances of a DC microgrid based on the solution of different optimization algorithms, involving technical and economic targets. The study involves statistical analyses concerning EVs usage, based on historical dataset, with the aim to generate scenarios to be investigated. Performances are compared by means of technical and economic indicators. The considered layout of DC microgrid refers to a realistic installation.
- Open Access
Technical Indicators for the Comparison of Power Network Development in Scenario Evaluations
The problem of electric network expansion has different implications concerning the definition of criteria for the comparison of different candidate projects. Transmission expansion planning usually involves a set of economic and technical influences on market framework and on network operation over defined scenario evolutions, or even combining generation and transmission planning, although the application to real-sized networks usually implies cost-benefit analysis. In this paper, a methodology for performance analysis of a set of network development projects is proposed, including zonal market framework and load flow analysis, in order to individuate possible candidate projects and their influence on active power losses, admissible load increase and admissible renewable generation increase. Those merit indicators are compared among candidate projects by means of Analytic Hierarchy Process (AHP) method, aiming at determining the most promising solution under different weights of criteria. Moreover, the influence of network development investment cost on project selection is assessed by means of an extension of AHP. The procedure is applied to yearly operation of NREL-118 test system.
Open AccessTechnical Indicators for the Comparison of Power Network Development in Scenario Evaluations
The problem of electric network expansion has different implications concerning the definition of criteria for the comparison of different candidate projects. Transmission expansion planning usually involves a set of economic and technical influences on market framework and on network operation over defined scenario evolutions, or even combining generation and transmission planning, although the application to real-sized networks usually implies cost-benefit analysis. In this paper, a methodology for performance analysis of a set of network development projects is proposed, including zonal market framework and load flow analysis, in order to individuate possible candidate projects and their influence on active power losses, admissible load increase and admissible renewable generation increase. Those merit indicators are compared among candidate projects by means of Analytic Hierarchy Process (AHP) method, aiming at determining the most promising solution under different weights of criteria. Moreover, the influence of network development investment cost on project selection is assessed by means of an extension of AHP. The procedure is applied to yearly operation of NREL-118 test system.
- 30 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Techno-Economic Benefit of Network Developments: a Flow-Based Evaluation
In the current regulatory framework and market environment, transmission network is required to perform correctly in a wide range of conditions. The possibility to build network reinforcements implies a careful evaluation of influences on different engineering, social and economic aspects. In this paper, a methodology for technical and economic benefit evaluation of network development projects is proposed. To this purpose, a flow-based approach is exploited, including a market algorithm and network operation analysis with security issues.
- 30 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
Techno-Economic Benefit of Network Developments: a Flow-Based Evaluation
In the current regulatory framework and market environment, transmission network is required to perform correctly in a wide range of conditions. The possibility to build network reinforcements implies a careful evaluation of influences on different engineering, social and economic aspects. In this paper, a methodology for technical and economic benefit evaluation of network development projects is proposed. To this purpose, a flow-based approach is exploited, including a market algorithm and network operation analysis with security issues.
- Open Access
Variable Structure Control of a Small Ducted Wind Turbine in the Whole Wind Speed Range Using a Luenberger Observer
This paper proposes a new variable structure control scheme for a variable-speed, fixed-pitch ducted wind turbine, equipped with an annular, brushless permanent-magnet synchronous generator, considering a back-to-back power converter topology. The purpose of this control scheme is to maximise the aerodynamic power over the entire wind speed range, considering the mechanical safety limits of the ducted wind turbine. The ideal power characteristics are achieved with the design of control laws aimed at performing the maximum power point tracking control in the low wind speeds region, and the constant speed, power, and torque control in the high wind speed region. The designed control laws utilize a Luenberger observer for the estimation of the aerodynamic torque and a shallow neural network for wind speed estimation. The effectiveness of the proposed method was verified through tests in a laboratory setup. Moreover, a comparison with other solutions from the literature allowed us to better evaluate the performances achieved and to highlight the originality of the proposed control scheme.
Open AccessVariable Structure Control of a Small Ducted Wind Turbine in the Whole Wind Speed Range Using a Luenberger Observer
This paper proposes a new variable structure control scheme for a variable-speed, fixed-pitch ducted wind turbine, equipped with an annular, brushless permanent-magnet synchronous generator, considering a back-to-back power converter topology. The purpose of this control scheme is to maximise the aerodynamic power over the entire wind speed range, considering the mechanical safety limits of the ducted wind turbine. The ideal power characteristics are achieved with the design of control laws aimed at performing the maximum power point tracking control in the low wind speeds region, and the constant speed, power, and torque control in the high wind speed region. The designed control laws utilize a Luenberger observer for the estimation of the aerodynamic torque and a shallow neural network for wind speed estimation. The effectiveness of the proposed method was verified through tests in a laboratory setup. Moreover, a comparison with other solutions from the literature allowed us to better evaluate the performances achieved and to highlight the originality of the proposed control scheme.