RERiyanti Ekafitri

Riyanti Ekafitri

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Riyanti Ekafitri has a total of 54 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of plasma-modified rice starch on physicochemical and sensory properties of cheese

    by Bara Yudhistira, Adila Rifa Mutia, Riyanti Ekafitri, Ahmad Ni’MAtullah Al-Baarri, Putri Widyanti Harlina, Fuangfah Punthi, Novita Indrianti, Lia Ratnawati, Achmat Sarifudin, Maulana Furqon, et al.


  • Open Access

    Effect of Soaking Treatments in Acid and Salt Solutions on Physicochemical, Structural, Thermal and Rheological Properties of Porang

    by Lia Ratnawati, Novita Indrianti, Nok Afifah, Riyanti Ekafitri, Enny Sholichah, Dewi Desnilasari, Woro Setiaboma, Dita Kristanti, Achmat Sarifudin

    Research background. Porang (Amorphophallus muelleri Blume) contains a high amount of starch, glucomannan and Ca-oxalate. Soaking porang tuber in acid (citric acid) and salt (sodium chloride) solutions affects the Ca-oxalate content, functional, rheological and thermal properties of porang flour. The aim of this study is to thoroughly investigate the effect of soaking treatments in acid and salt solutions at different temperatures on the physicochemical, rheological and thermal properties, functional groups, molecular mass and morphology of porang flour. Experimental approach. Soaking treatments in acid and salt solutions at different temperatures affect the properties of porang flour. This research investigated the effect of soaking porang slices in citric acid (5 %) and sodium chloride (8 %) solutions at different soaking temperatures (25, 55 and 85 °C for 1 h) on the properties of the resulting porang flour. Results and conclusions. The results of this study showed that all treatments successfully reduced the Ca-oxalate mass fraction in porang flour. The acid treatments reduced the glucomannan content more than the salt treatments. Soaking in acid solutions also decreased viscosity, molecular mass and thermal stability of porang flour. When the soaking temperature was increased, the Ca-oxalate mass fraction, molecular mass, viscosity and thermal stability of the porang flour decreased. The acid and salt treatments did not change the FTIR patterns. The morphological analysis showed that the acid and salt treatments resulted in particles with rough surface and short crystal needles of Ca-oxalate. Soaking the porang slices in salt solution at a temperature of 55 °C was the most effective treatment to reduce the Ca-oxalate content of porang flour while retaining its other quality parameters. Novelty and scientific contribution. The results of this study provided a comprehensive understanding of the effect of soaking porang slices in acid and salt solutions on the properties of the obtained porang flour. They can be used as scientific evidence on how to treat the porang slices to obtain the best quality of porang flour.


  • Open Access

    Effects of photooxidation exposure time on the modification of cassava starch: a comprehensive study on chemical, functional, structural, and morphological properties

    by Riyanti Ekafitri, Niken Widya Palupi, Muhammad Eka Wijaya, Achmat Sarifudin, Lia Ratnawati, Novita Indrianti, Rima Kumalasari, Maulana Furqon, Siti Khudaifanny Dasa Febrianti Asna Putri, Woro Setiaboma

    Photooxidation is one of the green technologies that can be used to modify starch. This process produces oxidized starch which induces alterations in the starch structure and functional properties. Photooxidation of starch can be influenced by hydrogen peroxide concentration, exposure time, slurry concentration, ultraviolet (UV) intensity, addition of lactic acid, and temperature. This study aims to evaluate the effect of photooxidation exposure time on the chemical, functional, structural, and morphological properties of cassava starch. Cassava starch was modified using a UV catalysator reactor and treated with photooxidation using a combination of hydrogen peroxide and UV irradiation for 15, 30, and 45 min. The result showed that the longer exposure time produced starch with higher amylose, carboxyl contents, solubility, water absorption capacity, oil absorption capacity, and color L*. Moreover, the longer time of the photooxidation process caused a decrease in the pH value, swelling power, and pasting properties. Photooxidation decreased the relative crystallinity values and damaged the granule morphology of the modified cassava starch. These results showed that photooxidation successfully modified cassava starch.


  • Application of Ohmic Heating for Green Coffee Bean Fermentation: Effect of Voltage Gradient on the Heating Performance, Energy, EC, pH, and Fermentation Index

    by Diang Sagita, Dita Kristanti, Woro Setiaboma, Rima Kumalasari, Riyanti Ekafitri, Lista Eka Yulianti, Devry Pramesti Putri, Raden Cecep Erwan Ardiansyah, Dewi Desnilasari, Hari Hariadi


  • Open Access

    Optimization of banana bar formulation to provide a nourishing snack for toddlers using response surface methodology

    by Achmat Sarifudin, Nok Afifah, Novita Indrianti, Dewi Desnilasari, Dita Kristanti, Lia Ratnawati, Riyanti Ekafitri


  • Open Access

    Shelf-life assessment of energy banana bar using acceleration method with critical moisture content approach

    by Riyanti Ekafitri, Yose Rizal Kurniawan, Dewi Desnilasari, Diki Nanang Surahman, Ashri Indriati

    The shelf-life of the product need to be evaluated according to the commercialization of the product. Shelf-life assessment of the product can be done using acceleration method (Accelerated Shelf-life Testing) with critical moisture content approach. This research used the acceleration method to predict the expired date of the energy bar based banana. This method required the data such as initial water content, critical moisture content, solid weight of the product, surface area of the packaging, permeability water vapor of the packaging, saturated water vapor pressure, and slope of the sorption isotherm curve. The result showed that the shelf life of banana bar products that was packaged using aluminium foil, aluma, and metalized plastics consecutively for 511.15; 458.72; and 80.95 days based on the acceleration method with the critical moisture content approach.


  • Open Access

    Nutritional and physical properties of three varieties of Hanjeli (Coix lacryma-Jobi) flour for food diversification and application uses

    by N K I Mayasti, A C Iwansyah, A Indriati, R Ekafitri, Y Adriana

    Hanjeli (Coix lacryma-jobi) is widely used as a source for new food development with high nutritional content. However, information about the type of Hanjeli variety used as alternative nutritious food is still limited. In this study, we compared the nutritional and physical properties of three varieties of Hanjeli (Coix lacryma-Jobi) flour namely Pulut (HAP), Unpad (HHA) and Batu (HBA) for food diversification and application uses. A comparative evaluation of the nutritional property of Hanjeli flours including moisture, ash, protein, fat, carbohydrates, dietary fiber, calcium, energy, and starch contents was carried out. While for physical property, the yields of Hanjeli flours were analyzed. The results showed that the variety of Hanjeli significantly affected to nutritional and physical properties of flours (P < 0.05). Pulut was the best variety due to its nutritional and physical properties. In this study, cookies made from 100 % of Hanjeli flour from Pulut variety contained moisture (3.97%), ash (1,93%), protein (9,17%), fat (23.58%), carbohydrates (61,59%), dietary fiber (7,69%), and energy (494,29 kcal) which met with the quality requirement of Indonesian National Standard for cookies. Hanjeli is promising as a new source of nutrition for diversification and application food uses.


  • Open Access

    Chemical properties, functionality, and morphology of taro flour modified by H2O2 oxidation and irradiation of UV light

    by R Ekafitri, Y Pranoto, A Herminiati

    Taro tuber is one type of traditional Indonesian tubers which is potential to be processed into flour. Modification of taro flour using H2O2 oxidation catalysed with UV irradiation can improve the quality of taro flour. This study aims to determine the chemical properties, functionality, and morphology of modified taro flour affected by concentration H2O2 and oxidation-UV irradiation time. The study used a completely randomized design with two factors, hydrogen peroxide concentration (3, 4, and 5 percent) and time of oxidation-UV irradiation (5, 15, 25, and 35 minutes). Taro flour was analysed in terms of carbonyl, carboxyl, and amylose content pasting properties (peak viscosity, final viscosity, and setback, viscosity), baking expansion, crystallinity, and granular morphology. The results show that the higher the hydrogen peroxide concentration and the longer the reaction time caused the increase in the carbonyl, carboxyl, and amylose contents, peak viscosity, final viscosity, and baking expansion. Meanwhile, it caused a decrease in setback viscosity, relative crystallinity, and damaged the morphological structure of flour granules. All these characteristics are recommended for bakery product production.


  • Open Access

    Functional properties of ripe plantain (Musa spp) flour from different varieties

    by R Kumalasari, N K I Mayasti, D N Surahman, R Ekafitri, A S Wahyuni, D Desnilasari

    Ripe plantain has potentially become flour with good sensory and easy to digest. This study was carried out to determine the functional properties of five varieties of ripe plantains flour. This research was conducted using a completely randomized design with a single factor, namely a variety of plantains consisting of five levels: V1 = Kapas (Musa corniculata); V2 = Tanduk (Musa corniculata J.De Leureiro); V3 = Siam (Musa paradisiaca var. Moralis M.); V4 = Kepok (Musa paradisiaca var. Bluggoe); V5 = Raja Bulu (Musa sapientum var. Paradisiaca Baker), and each treatment was repeated 3 times. The result showed that the yield and moisture content of plantain flour from the five varieties ranges from 5.88% - 16.19% and 6.71% - 9.51% and kapok flour has significantly different in moisture content and yield compare with other varieties. The water absorption capacity ranges from 2.87-3.03 g/g, was not significantly different among the treatments. The oil absorption capacity ranges from 2.13-2.30 (g/g) and OAC of ripe kapas was significantly different compared with ripe siam flour and ripe raja bulu flour. The swelling capacity ranges from 3.41-4.19 g/g and SC of ripe tanduk flour was significantly different from ripe kepok flour. The solubility ranges from 8.59-29.67% and solubility of ripe kapas, kepok, raja bulu flour was significantly different with ripe tanduk and siam flour. The peak time (6.84-7.00 minutes) and pasting temperature (94.88-95.03°C) were not significantly different among the treatment. The peak viscosity ranges from 169.00-653.00Cp and ripe kapas and raja buluh flour was significantly different from others, it was higher than others. The breakdown viscosity ranges from 22.00-178.00 Cp and ripe tanduk and raja buluh was significantly different from others, it was higher than others. The setback viscosity ranges from 45.00-545.67Cp and ripe kapas flour was significantly different among the treatments with the highest value. Based on the result could be concluded that different varieties could have different or the same functional properties. The used of ripe plantain flour for food production could be based on the functional properties of the flour.


  • Open Access

    Modifikasi Proses Penambahan Bulir Sari Buah Jambu Biji: Analisis Mutu dan Tekno-Ekonomi

    by Nur Kartika Indah Mayasti, Riyanti Eka Fitri, Nok Afifah

    Telah banyak produk minuman sari buah jambu biji yang ada di pasaran. Untuk menarik perhatian konsumen maka dilakukan pengembangan produk minuman sari buah jambu dengan penambahan bulir buah sebagai sensasi buah asli. Penambahan bulir buah dilakukan dengan memanfaatkan by product berupa biji, kulit, dan pulp yang tidak lolos saring dan terbuang pada proses produksi. Penelitian ini bertujuan menambahkan bulir pada sari buah jambu dengan tiga modifikasi proses tertentu (kontrol, penambahan bulir pada mixing tank, pada thermo tank) dan mengamati pengaruhnya terhadap sifat fisik, kimia, tingkat kesukaan, dan analisa tekno-ekonomi dari proses terpilih. Tiga perlakuan menghasilkan berat bulir 3,80-10,12 b/v, TPT 11,80-12,10obrix, pH 4,40-4,46, TAT 0,06-0,07%. 20,12-22,31 % dan penerimaan keseluruhan netral hingga agak disukai. Perlakuan penambahan bulir pada mixing tank memiliki tingkat kesukaan tertinggi. Hal ini menunjukkan sari buah yang lebih disukai adalah dengan berat bulir 5,77% b/v, TPT 12,37 obrix, pH 4,40, TAT 0,06%,dan vitamin C 21,82 ppm. Analisa tekno-ekonomi produksi sari buah jambu dengan kapasitas produksi 590 liter/hari diperoleh NPV Rp 805.594.483,00, Net B/C 1,10, IRR 57,00%, dan payback period selama 4 tahun 4 bulan. Pertimbangan kriteria investasi di atas menunjukkan bahwa produksi minuman sari buah jambu dengan proses terpilih layak untuk dijalankan.