Mário César Furtado da Costa
Mário César Furtado da Costa has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
- Flaviano Falcão de Araújo
UNIFACISA
2 shared publications - Gustavo José de Luna Campos
Hospital de Emergência e Trauma Dom Luiz Gonzaga Fernandes
2 shared publications - Igor Figueiredo Pereira
Centro Universitário Maurício de Nassau, João Pessoa, Paraíba, Brasil
2 shared publications - Joana de Ângelis Alves Silva
Hospital de Emergência e Trauma Dom Luiz Gonzaga Fernandes
2 shared publications - Rebeca Valeska Soares Pereira
Hospital de Emergência e Trauma Dom Luiz Gonzaga Fernandes
2 shared publications - Ana Isabella Arruda Meira Ribeiro
Universidade Estadual da Paraiba
1 shared publication
Latest Publications
- Open Access
- 23 December 2025
- Published by Editora RECIMA21 LTDA in RECIMA21 - Revista Científica Multidisciplinar
- Vol. 7 (1) , e717598
O EFEITO DA FIBRINA RICA EM PLAQUETAS NAS CIRURGIAS DE TERCEIROS MOLARES MANDIBULARES IMPACTADOS: UMA REVISÃO INTEGRATIVA
Objetivo: fazer uma busca na literatura sobre o efeito da L-PRF no processo de cicatrização do alvéolo dentário após a extração de terceiros molares a nível celular e analisar seu impacto no pós-cirúrgico. Metodologia: revisão integrativa de literatura, com a seguinte pergunta norteadora: “Como o uso do L-PRF pode ajudar na diminuição das complicações pós-operatória após a extração de terceiro molar impactado?”. Foram utilizados artigos publicados de 2020 a 2025 em língua portuguesa, língua inglesa e língua chinesa pesquisados nas bases de dados PubMed e BVS com os descritores Fibrina Rica em Plaquetas, terceiros molares impactados (em português e em inglês). Resultados: Após a busca de artigos com o operador booleano “and” foram selecionados 14 artigos que se enquadraram nos critérios de inclusão e exclusão. Considerações finais: Os efeitos benéficos da L-PRF na cicatrização e regeneração tecidual a nível celular e na diminuição do edema, do trismo no pós- operatório, do risco de reações alérgicas e complicações após a extração.
- 23 December 2025
- Published by Editora RECIMA21 LTDA in RECIMA21 - Revista Científica Multidisciplinar
- Vol. 7 (1) , e717598
Open AccessO EFEITO DA FIBRINA RICA EM PLAQUETAS NAS CIRURGIAS DE TERCEIROS MOLARES MANDIBULARES IMPACTADOS: UMA REVISÃO INTEGRATIVA
Objetivo: fazer uma busca na literatura sobre o efeito da L-PRF no processo de cicatrização do alvéolo dentário após a extração de terceiros molares a nível celular e analisar seu impacto no pós-cirúrgico. Metodologia: revisão integrativa de literatura, com a seguinte pergunta norteadora: “Como o uso do L-PRF pode ajudar na diminuição das complicações pós-operatória após a extração de terceiro molar impactado?”. Foram utilizados artigos publicados de 2020 a 2025 em língua portuguesa, língua inglesa e língua chinesa pesquisados nas bases de dados PubMed e BVS com os descritores Fibrina Rica em Plaquetas, terceiros molares impactados (em português e em inglês). Resultados: Após a busca de artigos com o operador booleano “and” foram selecionados 14 artigos que se enquadraram nos critérios de inclusão e exclusão. Considerações finais: Os efeitos benéficos da L-PRF na cicatrização e regeneração tecidual a nível celular e na diminuição do edema, do trismo no pós- operatório, do risco de reações alérgicas e complicações após a extração.
- Open Access
- 23 October 2024
- Published by Bentham Science Publishers Ltd. in The Open Dentistry Journal
- Vol. 18 (1)
The Use of 3D Model Printing for Acute Planning in Oral and Maxillofacial Traumatology
Introduction: Due to the complex anatomy of craniomaxillofacial structures, facial reconstruction following high-impact traumas is extremely challenging. Therefore, this study aimed to evaluate the use of biomodels in the surgical planning of complex fractures and the sequelae in the oromaxillofacial region. Materials and Methods: This is a cross-sectional, exploratory, descriptive, and quantitative documentary study. It was conducted at the “Dom Luiz Gonzaga Fernandes” Emergency and Trauma Hospital, in the hinterland of the state of Paraíba, in Brazil, based on cases recorded between November 2021 and November 2022. The research instrument utilized was a self-developed questionnaire. Results: No statistically significant correlation was observed between the biomodel acquisition time and the length of hospitalization, with a Spearman's correlation coefficient of r = -0.079. Although the need for adjustment of osteosynthesis material was 50% in cases where acrylonitrile butadiene styrene (ABS) models were used, with p (1) = 0.464, in order to be significantly more faithful, it would require a study with a higher sample size. The average length of surgery, in minutes, was 91.25 ± 28.00. The average cost of the materials used to manufacture the biomodels, in Brazilian reais (R$), was R$122.00 ± R$89.09. Conclusion: The use of biomodels in the surgical planning of complex fractures and oromaxillofacial sequelae did not increase the length of hospitalization. The material used for the prototype manufacture suggests a potential influence on its faithfulness. The length of surgery was shorter in interventions that utilized biomodels in the planning phase. It was also noted that the average cost of manufacture varies according to the type of material chosen and the quantity required.
- 23 October 2024
- Published by Bentham Science Publishers Ltd. in The Open Dentistry Journal
- Vol. 18 (1)
Open AccessThe Use of 3D Model Printing for Acute Planning in Oral and Maxillofacial Traumatology
Introduction: Due to the complex anatomy of craniomaxillofacial structures, facial reconstruction following high-impact traumas is extremely challenging. Therefore, this study aimed to evaluate the use of biomodels in the surgical planning of complex fractures and the sequelae in the oromaxillofacial region. Materials and Methods: This is a cross-sectional, exploratory, descriptive, and quantitative documentary study. It was conducted at the “Dom Luiz Gonzaga Fernandes” Emergency and Trauma Hospital, in the hinterland of the state of Paraíba, in Brazil, based on cases recorded between November 2021 and November 2022. The research instrument utilized was a self-developed questionnaire. Results: No statistically significant correlation was observed between the biomodel acquisition time and the length of hospitalization, with a Spearman's correlation coefficient of r = -0.079. Although the need for adjustment of osteosynthesis material was 50% in cases where acrylonitrile butadiene styrene (ABS) models were used, with p (1) = 0.464, in order to be significantly more faithful, it would require a study with a higher sample size. The average length of surgery, in minutes, was 91.25 ± 28.00. The average cost of the materials used to manufacture the biomodels, in Brazilian reais (R$), was R$122.00 ± R$89.09. Conclusion: The use of biomodels in the surgical planning of complex fractures and oromaxillofacial sequelae did not increase the length of hospitalization. The material used for the prototype manufacture suggests a potential influence on its faithfulness. The length of surgery was shorter in interventions that utilized biomodels in the planning phase. It was also noted that the average cost of manufacture varies according to the type of material chosen and the quantity required.
- Open Access
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 37, 025
The impact of the COVID-19 pandemic in Brazil: a study in tertiary dental care
The pandemic caused by coronavirus has resonated throughout different levels of health care in Brazil and, in this context, the present research aimed to evaluate this impact on tertiary dental care provided by the Unified Health System (SUS). Therefore, an ecological study was conducted with data obtained from the Hospital Information System processed by the Portal of the Department of Informatics of SUS. The sample consisted of patients of all sexes and age groups, whose Hospital Admission Authorizations (AIHs) were approved for dental tertiary care procedures from January 2015 to December 2020. Descriptive analyses and the ANOVA test with a significance level set at p < 0.05 were used. When the annual mean numbers of AIHs approved were evaluated, findings showed that on an average, the Southeast region authorized a higher number of procedures (p-value < 0.001), however, in the pandemic year (2020), a reduction of approximately 24.5% of these hospitalizations occurred throughout Brazil, with the Midwest being the region most affected (32.12%). A percentage increase occurred in the Surgical Treatment of Oral sinus/Oral nasal Fistula (16.1%), in addition to a significant decrease in performing procedures for Resection of Mouth Lesion (33.4%). In the pandemic year, there was a reduction of 14% in expenditures related to hospital services and 23.26% related to professional services. It was concluded that the data presented demonstrated a significant reduction in AIHs for tertiary dental care in the pandemic year.
- 1 January 2023
- Published by FapUNIFESP (SciELO) in Brazilian Oral Research
- Vol. 37, 025
Open AccessThe impact of the COVID-19 pandemic in Brazil: a study in tertiary dental care
The pandemic caused by coronavirus has resonated throughout different levels of health care in Brazil and, in this context, the present research aimed to evaluate this impact on tertiary dental care provided by the Unified Health System (SUS). Therefore, an ecological study was conducted with data obtained from the Hospital Information System processed by the Portal of the Department of Informatics of SUS. The sample consisted of patients of all sexes and age groups, whose Hospital Admission Authorizations (AIHs) were approved for dental tertiary care procedures from January 2015 to December 2020. Descriptive analyses and the ANOVA test with a significance level set at p < 0.05 were used. When the annual mean numbers of AIHs approved were evaluated, findings showed that on an average, the Southeast region authorized a higher number of procedures (p-value < 0.001), however, in the pandemic year (2020), a reduction of approximately 24.5% of these hospitalizations occurred throughout Brazil, with the Midwest being the region most affected (32.12%). A percentage increase occurred in the Surgical Treatment of Oral sinus/Oral nasal Fistula (16.1%), in addition to a significant decrease in performing procedures for Resection of Mouth Lesion (33.4%). In the pandemic year, there was a reduction of 14% in expenditures related to hospital services and 23.26% related to professional services. It was concluded that the data presented demonstrated a significant reduction in AIHs for tertiary dental care in the pandemic year.
- Open Access
- 7 August 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (9) , e796997986
Atrophic mandibular fracture treatment: prototyping as a tool in surgical planning
Introduction: Atrophic mandibular fractures are injuries found in old age due to facial trauma. Its treatment is a challenge, even for experienced surgeons, due to the different approaches that can be taken from clinical decisions. Taking into consideration the limitations that the age presented by most of the affected patients brigs, there are devices that stand out by seeking benefits in terms of predictability and time gain in the intraoperative period. The additive manufacturing is a valuable resource in the surgical planning and rehabilitation of these patients. Objective: To expose a clinical case that demonstrates the success in the use of surgical planning through a prototype printed in 3D technology. Clinical case: Elderly woman, 75 years old, victim of a fall from her own height who had a bilateral atrophic mandible fracture due to facial trauma. The surgical procedure was planned using a prototype printed in 3D technology providing predictability and reduced surgical time. The patient evolved in the postoperative period without complaints, with function immediately restores and without signs of infection or plate exposure. Conclusions: Atrophic mandible fractures are still related to a challenging treatment, therefore, adequate surgical planning and the use of auxiliary strategies such as 3D prototyping provide greater predictability of results, as well as time gain during the intraoperative.
- 7 August 2020
- Published by Research, Society and Development in Research, Society and Development
- Vol. 9 (9) , e796997986
Open AccessAtrophic mandibular fracture treatment: prototyping as a tool in surgical planning
Introduction: Atrophic mandibular fractures are injuries found in old age due to facial trauma. Its treatment is a challenge, even for experienced surgeons, due to the different approaches that can be taken from clinical decisions. Taking into consideration the limitations that the age presented by most of the affected patients brigs, there are devices that stand out by seeking benefits in terms of predictability and time gain in the intraoperative period. The additive manufacturing is a valuable resource in the surgical planning and rehabilitation of these patients. Objective: To expose a clinical case that demonstrates the success in the use of surgical planning through a prototype printed in 3D technology. Clinical case: Elderly woman, 75 years old, victim of a fall from her own height who had a bilateral atrophic mandible fracture due to facial trauma. The surgical procedure was planned using a prototype printed in 3D technology providing predictability and reduced surgical time. The patient evolved in the postoperative period without complaints, with function immediately restores and without signs of infection or plate exposure. Conclusions: Atrophic mandible fractures are still related to a challenging treatment, therefore, adequate surgical planning and the use of auxiliary strategies such as 3D prototyping provide greater predictability of results, as well as time gain during the intraoperative.