Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jelizaveta Zorica has a total of 11 co-authors. Here are the top co-authors by number of shared publications:

  • Diana Bajare

    Institute of Sustainable Building Material and Engineering Systems, Faculty of Civil and Mechanical Engineering, Riga Technical University, Ķipsalas iela 6a, LV-1048 Riga, Latvia

    5 shared publications
  • Aleksandrs Korjakins

    Institute of Sustainable Building Materials and Engineering Systems, Faculty of Civil and Mechanical Engineering, Riga Technical University, Kipsalas St. 6A, LV-1048 Riga, Latvia

    3 shared publications
  • Genadijs Sahmenko

    Institute of Sustainable Building Materials and Engineering Systems, Faculty of Civil and Mechanical Engineering, Riga Technical University, Kipsalas iela 6A, LV-1048 Riga, Latvia

    3 shared publications
  • Girts Bumanis

    Institute of Sustainable Building Materials and Engineering Systems, Faculty of Civil and Mechanical Engineering, Riga Technical University, 6A Kipsalas, LV-1048 Riga, Latvia

    3 shared publications
  • Maris Sinka

    Institute of Sustainable Building Materials and Engineering Systems, Faculty of Civil and Mechanical Engineering, Riga Technical University, 6A Kipsalas, LV-1048 Riga, Latvia

    3 shared publications
  • A Korjakins

    Department of Building Materials and Products, Institute of Materials and Structures, Riga Technical University, Kalku str. 1, LV-1658, Riga, Latvia

    1 shared publication

Latest Publications

  • Open Access

    Hemp Biocomposite Boards Using Improved Magnesium Oxychloride Cement

    by Jelizaveta Zorica, Maris Sinka, Genadijs Sahmenko, Laura Vitola, Aleksandrs Korjakins, Diana Bajare

    The share of bio-based materials in modern construction needs to grow more rapidly due to increasingly stringent environmental requirements as a direct result of the climate emergency. This research aims to expand the use of hemp concrete in construction by replacing traditional lime binder with magnesium oxychloride cement, which provides a faster setting and higher strength, opening the door for industrial production. However, the negative feature of this binder is its low water resistance. In this work, the water resistance of magnesium cement was studied, and the possibilities of improving it by adding fly ash, various acids and nano-silica were considered. Nano-silica and citric acid showed the most significant impact, increasing the binder water resistance up to four times, reaching softening coefficient of 0.80 while reducing the compressive strength of the magnesium cement in a dry state by only 2–10%. On the downside, citric and phosphoric acid significantly extended the setting of the binder, delaying it 2–4 times. Regarding board production, prototype samples of hemp magnesium biocomposite demonstrated compressive strength of more than 3.8 MPa in the dry state but only 1.1–1.6 MPa in the wet state. These results did not correlate with binder tests, as the additives did not increase the strength in the wet state.


  • Open Access

    Processing of Gypsum Construction and Demolition Waste and Properties of Secondary Gypsum Binder

    by Girts Bumanis, Jelizaveta Zorica, Aleksandrs Korjakins, Diana Bajare

    The waste amount coming from construction and demolition (CDW) has significant volume and potential to provide the backbone of a secondary material bank. Up to now, little attention is paid to waste gypsum recycling from CDW while a shift in global attitude toward waste management brings motivation to use CDW gypsum as secondary raw material. The present research investigates the properties of gypsum binder obtained from secondary raw materials originating from CDW. Three types of drywall boards and cast monolithic gypsum from interior walls, treated in the laboratory, and a gypsum binder was obtained. Comparison has been studied and the most effective solutions regarding CDW treatment are represented. Separation, crushing, and milling were done. DTA/TG, XRD, SEM, and particle size distribution were characterized by CDW gypsum. The heat treatment temperature was selected at 130 °C for 4 or 24 h and 180 °C for 4 h. Consistency, set time, and mechanical properties were characterized. Results indicate that a gypsum binder with a strength up to 3.7 MPa can be obtained. Low strength is associated with fineness of CDW gypsum and a high water/gypsum ratio (from 0.6 to 1.396). Gypsum content in CDW (38 to 92 wt.%) should be considered as an important factor during gypsum CDW recycling.


  • Improved Magnesium Cement for Durable Hemp Composite Boards

    by Jelizaveta Zorica, Maris Sinka, Genadijs Sahmenko, Diana Bajare

    Hemp concrete is a well-known bio-based building material, but due to its relatively low compressive strength is mainly used as an insulation material with a load-bearing wooden frame. There are possibilities to expand hemp concrete application in construction by substituting traditional lime with magnesium cement. Magnesium oxychloride cement is a material already known for some time and nowadays used in building board production. Strength, lightweight, ease of use are advantages that highlight relatively new magnesium oxychloride type boards compared to traditional sheeting materials such as plywood, gypsum plasterboard and fibre-cement board. Therefore, similar parameters are thought to be reached by producing magnesium oxychloride hemp board. In this work, magnesium cement water resistance was studied and possibilities to improve it was examined by adding fly ash and nanosilica. Among the nanomaterials used in building materials, nanosilica has gained significant interest by performing a beneficial effect in improving the mechanical properties of concretes. In addition, due to its ultrafine size and high chemical reactivity, the performance of nanosilica is much better with a lower amount of admixture required. Results show that applied nanosilica slightly reduced the compressive strength of magnesium cement in a dry state, but at the same time significantly increased its water resistance. Hemp magnesium oxychloride cement board prototype samples were produced and demonstrate promising results for further manufacturing of hemp composite boards.

  • Open Access

    Fast Setting Binders for Application in 3D Printing of Bio-Based Building Materials

    by Maris Sinka, Jelizaveta Zorica, Diana Bajare, Genadijs Sahmenko, Aleksandrs Korjakins

    The construction industry is one of the largest emitters of CO2 because the production of traditional building materials is highly energy-intensive and uses considerable amounts of raw materials. This research aims to decrease the negative environmental impact of the construction industry by providing biocomposites with a low environmental impact due to their bio-based components and efficient use of the materials through 3D printing. Agricultural waste products—hemp shives—are used in these materials as a filler together with three different types of fast-setting binders—magnesium, calcium sulphoaluminate (CSA) and those that are gypsum-based. The study determines the setting time and compressive strength of these binders, as well as the formation of biocomposites of different densities for different applications; extrusion tests and preliminary life cycle assessment (LCA) are also performed. Results show that biocomposites with hemp shives and fast setting binders have a possible application in 3D printing due to their shape stability and buildability, as well as relatively high compressive strength, which allows for load-bearing use at high densities and thermal insulation use at low densities, although printability at low binder content remains a significant challenge. Preliminary LCA results show that CSA and gypsum binders have the lowest environmental impact from the binders considered.


  • Open Access

    Properties of Foamed Lightweight High-Performance Phosphogypsum-Based Ternary System Binder

    by Girts Bumanis, Jelizaveta Zorica, Diana Bajare

    The potential of phosphogypsum (PG) as secondary raw material in construction industry is high if compared to other raw materials from the point of view of availability, total energy consumption, and CO2 emissions created during material processing. This work investigates a green hydraulic ternary system binder based on waste phosphogypsum (PG) for the development of sustainable high-performance construction materials. Moreover, a simple, reproducible, and low-cost manufacture is followed by reaching PG utilization up to 50 wt.% of the binder. Commercial gypsum plaster was used for comparison. High-performance binder was obtained and on a basis of it foamed lightweight material was developed. Low water-binder ratio mixture compositions were prepared. Binder paste, mortar, and foamed binder were used for sample preparation. Chemical, mineralogical composition and performance of the binder were evaluated. Results indicate that the used waste may be successfully employed to produce high-performance binder pastes and even mortars with a compression strength up to 90 MPa. With the use of foaming agent, lightweight (370–700 kg/m3) foam concrete was produced with a thermal conductivity from 0.086 to 0.153 W/mK. Water tightness (softening coefficient) of such foamed material was 0.5–0.64. Proposed approach represents a viable solution to reduce the environmental footprint associated with waste disposal.


  • Open Access

    Effect of water-binder ratio on properties of phosphogypsum binder

    by G Bumanis, J Zorica, D Bajare, A Korjakins

    Technological, physical and mechanical properties of mineral binders are often defined by the amount of water add to the binder known as W/B ratio. The role of water is contributed to the workability of fresh paste, hydration processes, porosity, mechanical performance and durability of the material. Present research summarizes the relationship between gypsum based binder W/B ratio in mixture composition to properties of hardened gypsum binder, giving a marginal borders of properties affected by W/B. The W/B ratios evaluated were from 0.3 to 1.15. Dihydrate phosphogypsum (PG), which is a waste of phosphorus fertilizer industry and commercial gypsum binder were used as a raw material for production of gypsum samples and results compared to commercial gypsum binder. At the beginning PG was dried at 60°C and afterwards homogenized by milling it in ball mill or by collision milling in disintegrator. Samples were made with plasticizers, mineral additives and foam forming additive. In this work 26 dense and 9 porous mixture compositions was summarized, from which 18 compositions were made from commercial binder for comparison. A series of performance properties of the binders were investigated, such as density, porosity and 14d compression strength regarding to W/B ratio used to prepare the samples. The chemical and mineralogical composition of PG used was determined by XRF and XRD. The results indicate that plasticizers in PG based gypsum binder could reduce W/B ratio from 1.15 down to 0.4. The PG binder bulk density for samples without pore forming admixture was in range from 726 – 1600 kg/m3, total porosity 35 – 71 vol.% and compressive strength from 1.4 to 28.7 MPa at the age of 14 d. Ultra porous gypsum material was obtained with the pore forming agent, which allowed to obtain gypsum based material with bulk density from 213 – 726 kg/m3, total porosity from 67.9 – 90.6 % and compressive strength from 0.2 – 0.8 MPa. Results show that the material density and strength decreases while porosity tends to increases with the increase of W/B ratio. These tendencies are true both for dense and porous specimens. It was concluded, that lowest W/B of dense PG specimens was 0.43, otherwise the workability of a binder decreased dramatically and decrease of compressive strength was observed. With the same W/B ratio the technological properties of PG binder may be affected by gypsum treatment parameters and selected mixture composition, allowing to improve the properties of gypsum binder obtained from same raw material.


  • Open Access

    Technological properties of phosphogypsum binder obtained from fertilizer production waste

    by Girts Bumanis, Jelizaveta Zorica, Diana Bajare, Aleksandrs Korjakins