Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Malgorzata Sznajder has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    CaFap–Alumina Composite Bioceramics Based on the New CaAlO2F Phase

    by Adriana Barylyak, Viktor Zinchenko, Stanisław Adamiak, Svitlana Pavlinchuk, Grygoriy Dmytriv, Volodymyr Pavlyuk, Yaroslav Bobitski, Małgorzata Sznajder

    We report on the synthesis of a new CaAlO2F phase with a perovskite-type structure, which was formed as a third phase in the CaFap–alumina composite during the calcination of a mixture of Ca10(PO4)6F2 and Al(OH)3. The atomic coordinates, lattice constant, and space symmetry group of the CaAlO2F phase were determined by the XRD method. Next, the chemical composition and mechanical properties of the CaFap–alumina composite bioceramics were investigated. The material was found to exhibit high porosity, with pore diameters ranging from 100 to 1000 μm. The measured mean values of microhardness and Young’s modulus were 6.1 ± 1.0 GPa and 103 ± 8 GPa, respectively. The new CaAlO2F phase constituting the bioceramics exhibited a significantly higher nanohardness of 11.8 ± 1.5 GPa and Young’s modulus of 137 ± 9 GPa, which indicates that this phase can significantly improve the mechanical properties of CaFap–alumina bioceramics. The resulting fluorapatite-based biocomposite can pave the way for advanced medical ceramics as a material for load-bearing implants.

  • Open Access

    Atomistic Insights into Defect Migration in InxGa1-xN/GaN Heterostructures: Composition and Temperature Effects

    by Roman Hrytsak, Pawel Kempisty, Ewa Grzanka, Malgorzata Sznajder

    This study presents a detailed analysis of point defect migration in In x Ga 1 − x N / GaN heterostructures, focusing on two indium compositions (x = 0.125, 0.25). Using density functional theory calculations, we identify the impact of indium content and temperature on the mobility of nitrogen, gallium, and indium atoms, revealing key differences in their migration energy barriers. Furthermore, we investigate the lateral diffusion of indium and gallium atoms, as well as complexes of substitutional metal atoms with vacancies, through a vacancy-mediated mechanism in individual metal layers of In x Ga 1 − x N / GaN . Our results show that increasing indium concentration reduces migration barriers, enhancing defect mobility, particularly for indium atoms. These findings highlight the critical role of indium sublattice in promoting lattice relaxation and defect redistribution, while also elucidating the temperature-dependent dynamics of vacancy-mediated diffusion.


  • Open Access

    Solidified Salt Melts of the NaCl–KCl–CeF3–EuF3 System as Promising Luminescent Materials

    by Viktor Zinchenko, Ganna Volchak, Nataliia Chivireva, Pavlo Doga, Yaroslav Bobitski, Oleh Ieriomin, Serhii Smola, Anton Babenko, Małgorzata Sznajder

    This study presents the results of investigating the interaction between the CeF₃–EuF₃ system and the NaCl–KCl salt melt using spectroscopic methods. It was found that CeF₃ ions undergo no significant changes upon dissolution in the NaCl–KCl melt. In contrast, the dissolution of EuF₃, both individually and within the CeF₃–EuF₃ system, is accompanied by redox reactions leading to the formation of Eu2⁺. The diffuse reflectance spectra of both the bottom (insoluble sediment) and upper parts of the solidified salt melt in the UV range indirectly indicate photoluminescence excitation from Ce3⁺ and Eu2⁺ ions. In addition, absorption bands in the near-IR region (1900–2300 cm⁻1) confirm the retention of some Eu3⁺ ions in the salt melt. The study explored the effects of various factors—including sample composition, excitation wavelength, prior and subsequent heat treatment, and medium composition—on the excitation and emission spectra of the samples. Intense 5d-4f luminescence of Ce3⁺ and Eu2⁺ ions (at 330 and 430 nm, respectively) was observed predominantly in the upper part of the salt melts, along with much weaker 4f-4f luminescence from Eu3⁺ ions. Certain parameters were optimized to reduce the luminescence contribution from Ce3⁺ and especially Eu3⁺ ions while enhancing the luminescence of Eu2⁺ ions. Solidified salt solution-melts of the NaCl–KCl–CeF₃–EuF₃ system show promise as materials for developing solar ultraviolet radiation detectors.


  • Open Access

    Solidified Salt Melts of the NaCl–KCl–CeF3–EuF3 System as Promising Luminescent Materials

    by Viktor Zinchenko, Ganna Volchak, Nataliia Chivireva, Pavlo Doga, Yaroslav Bobytskyy, Oleh Ieriomin, Serhii Smola, Anton Babenko, Małgorzata Sznajder

    The results of the study of the interaction between the CeF3+EuF3 system and the salt melt NaCl–KCl by spectroscopic methods are presented. It was established that no significant changes occur with CeF3 ions upon dissolution in the NaCl–KCl melt. Instead, the transition of EuF3 into solution-melt, both individually and in the CeF3+EuF3 system, is accompanied by oxidation-reduction reactions with the formation of Eu2+. Diffuse reflection spectra of the samples – both bottom (insoluble sediment) and upper parts of the solidified salt melt in the UV range indirectly indicate the excitation of photoluminescence of Ce3+ and Eu2+ ions. On the other hand, the presence of absorption bands in the near-IR range of the spectrum (1900-2300 cm−1) confirms the preservation of a certain proportion of Eu3+ ions in the salt melt. The influence of various factors (composition of the solidified salt melt sample, excitation wavelength, previous and subsequent heat treatment, and composition of the medium) on the nature of the excitation and emission spectra of the samples was studied. A very intense 5d-4f luminescence of Ce3+ and Eu2+ ions (at 330 and 430 nm, respectively), mainly in the upper part of salt melts, and much weaker 4f-4f luminescence of Eu3+ ions were observed. Certain parameters were optimized to reduce the proportion of luminescence of Ce3+ and, especially, Eu3+ ions and to increase the luminescence of Eu2+ ions. Solidified salt solutions-melts of the NaCl–KCl–CeF3–EuF3 system are promising materials for the creation of solar ultraviolet radiation detectors.

  • Open Access

    Equimolar As4S4/Fe3O4 Nanocomposites Fabricated by Dry and Wet Mechanochemistry: Some Insights on the Magnetic–Fluorescent Functionalization of an Old Drug

    by Oleh Shpotyuk, Zdenka Lukáčová Bujňáková, Peter Baláž, Andriy Kovalskiy, Małgorzata Sznajder, Jozef Cebulski, Yaroslav Shpotyuk, Pavlo Demchenko, Ihor Syvorotka

    Multifunctional nanocomposites from an equimolar As4S4/Fe3O4 cut section have been successfully fabricated from coarse-grained bulky counterparts, employing two-step mechanochemical processing in a high-energy mill operational in dry- and wet-milling modes (in an aqueous solution of Poloxamer 407 acting as a surfactant). As was inferred from the X-ray diffraction analysis, these surfactant-free and surfactant-capped nanocomposites are β-As4S4-bearing nanocrystalline–amorphous substances supplemented by an iso-compositional amorphous phase (a-AsS), both principal constituents (monoclinic β-As4S4 and cubic Fe3O4) being core–shell structured and enriched after wet milling by contamination products (such as nanocrystalline–amorphous zirconia), suppressing their nanocrystalline behavior. The fluorescence and magnetic properties of these nanocomposites are intricate, being tuned by the sizes of the nanoparticles and their interfaces, dependent on storage after nanocomposite fabrication. A specific core–shell arrangement consisted of inner and outer shell interfaces around quantum-confined nm-sized β-As4S4 crystallites hosting a-AsS, and the capping agent is responsible for the blue-cyan fluorescence in as-fabricated Poloxamer capped nanocomposites peaking at ~417 nm and ~442 nm, while fluorescence quenching in one-year-aged nanocomposites is explained in terms of their destroyed core–shell architectures. The magnetic co-functionalization of these nanocomposites is defined by size-extended heterogeneous shells around homogeneous nanocrystalline Fe3O4 cores, composed by an admixture of amorphous phase (a-AsS), nanocrystalline–amorphous zirconia as products of contamination in the wet-milling mode, and surfactant.


  • Open Access

    Identification of the Kirkendall effect as a mechanism responsible for thermal decomposition of the InGaN/GaN MQWs system

    by Roman Hrytsak, Pawel Kempisty, Michal Leszczynski, Malgorzata Sznajder

    A drop in the efficiency of light-emitting diodes based on InGaN/GaN QWs known as the ‘green gap’ has been studied intensively over the past dozen years. Several factors were revealed to contribute to its origin, such as random fluctuations in the indium concentration or the diffusion of point defects during the growth of QWs. The aim of this paper is to demonstrate that the Kirkendall effect can be the mechanism responsible for the thermal decomposition of InGaN/GaN MQWs structures, contributing to the green gap problem. By applying density functional theory, harmonic approximation, and harmonic transition state theory, we calculated the heights of the migration energy barriers of In and Ga atoms diffusing in I n x G a 1 − x N alloys ( x = 0 , 0.11 , 0.22 ), the vibrational frequencies of I n x G a 1 − x N alloys in the presence of migrating point defects, the temperature dependencies of the defect migration energy barriers and diffusion coefficients of Ga and In atoms migrating in I n x G a 1 − x N alloys. We demonstrated the presence of unbalanced diffusion rates of In and Ga atoms at the I n x G a 1 − x N / G a N interfaces and finally explained the experimentally observed mechanism of void formation at the I n x G a 1 − x N / G a N interfaces by means of the Kirkendall effect.


  • Open Access

    Modeling of the Point Defect Migration across the AlN/GaN Interfaces—Ab Initio Study

    by Roman Hrytsak, Pawel Kempisty, Ewa Grzanka, Michal Leszczynski, Malgorzata Sznajder

    The formation and diffusion of point defects have a detrimental impact on the functionality of devices in which a high quality AlN/GaN heterointerface is required. The present paper demonstrated the heights of the migration energy barriers of native point defects throughout the AlN/GaN heterointerface, as well as the corresponding profiles of energy bands calculated by means of density functional theory. Both neutral and charged nitrogen, gallium, and aluminium vacancies were studied, as well as their complexes with a substitutional III-group element. Three diffusion mechanisms, that is, the vacancy mediated, direct interstitial, and indirect ones, in bulk AlN and GaN crystals, as well at the AlN/GaN heterointerface, were taken into account. We showed that metal vacancies migrated across the AlN/GaN interface, overcoming a lower potential barrier than that of the nitrogen vacancy. Additionally, we demonstrated the effect of the inversion of the electric field in the presence of charged point defects VGa3− and VAl3− at the AlN/GaN heterointerface, not reported so far. Our findings contributed to the issues of structure design, quality control, and improvement of the interfacial abruptness of the AlN/GaN heterostructures.


  • Open Access

    DFT-Based Studies on Carbon Adsorption on the wz-GaN Surfaces and the Influence of Point Defects on the Stability of the Diamond–GaN Interfaces

    by Malgorzata Sznajder, Roman Hrytsak

    Integration of diamond with GaN-based high-electron-mobility transistors improves thermal management, influencing the reliability, performance, and lifetime of GaN-based devices. The current GaN-on-diamond integration technology requires precise interface engineering and appropriate interfacial layers. In this respect, we performed first principles calculation on the stability of diamond–GaN interfaces in the framework of density functional theory. Initially, some stable adsorption sites of C atoms were found on the Ga- and N-terminated surfaces that enabled the creation of a flat carbon monolayer. Following this, a model of diamond–GaN heterojunction with the growth direction [111] was constructed based on carbon adsorption results on GaN{0001} surfaces. Finally, we demonstrate the ways of improving the energetic stability of diamond–GaN interfaces by means of certain reconstructions induced by substitutional dopants present in the topmost GaN substrate’s layer.