Matthias Bodenbenner
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Matthias Bodenbenner has a total of 31 co-authors. Here are the top co-authors by number of shared publications:
- Robert Schmitt
Fraunhofer Institute for Production Technology IPT, Steinbachstr. 17, 52074 Aachen, Germany
5 shared publications - Benjamin Montavon
RWTH Aachen University
4 shared publications - Anastasiia Belova
RWTH Aachen University
3 shared publications Andreas Bührig-Polaczek
RWTH Aachen University
3 shared publications- Daniel Lütticke
RWTH Aachen University
3 shared publications - Ike Kunze
RWTH Aachen University
3 shared publications
Latest Publications
- 9 July 2024
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 91 (9) , 441-453
Leveraging measurement data quality by adoption of the FAIR guiding principles
The analysis and reuse of measured process data are enablers for sustainable and resilient manufacturing in the future. Maintaining high measurement data quality is vital for maximising the usage and value of the data at hand. To ensure this data quality, the data management must be applied consequently throughout the complete Data Life-Cycle (DLC) and adhere to the FAIR guiding principles. In the two research consortia NFDI4Ing and the Cluster of Excellence “Internet of Production,” we investigate approaches to increase the measurement of data quality by integrating the FAIR guiding principles in all data management activities of the DLC. To facilitate the uptake of the FAIR guiding principles, we underline the significance of FAIR data for the reuse of high-quality data. Second, we are introducing a harmonised DLC to streamline data management activities. Third, we concisely review current trends and best practices in FAIR-aware data management and give suggestions for implementing the FAIR guiding principles.
- 9 July 2024
- Published by Walter de Gruyter GmbH in TM - Technisches Messen
- Vol. 91 (9) , 441-453
Leveraging measurement data quality by adoption of the FAIR guiding principles
The analysis and reuse of measured process data are enablers for sustainable and resilient manufacturing in the future. Maintaining high measurement data quality is vital for maximising the usage and value of the data at hand. To ensure this data quality, the data management must be applied consequently throughout the complete Data Life-Cycle (DLC) and adhere to the FAIR guiding principles. In the two research consortia NFDI4Ing and the Cluster of Excellence “Internet of Production,” we investigate approaches to increase the measurement of data quality by integrating the FAIR guiding principles in all data management activities of the DLC. To facilitate the uptake of the FAIR guiding principles, we underline the significance of FAIR data for the reuse of high-quality data. Second, we are introducing a harmonised DLC to streamline data management activities. Third, we concisely review current trends and best practices in FAIR-aware data management and give suggestions for implementing the FAIR guiding principles.
- Open Access
- 30 December 2023
- Published by Springer Nature
- p. 35-60
Evolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead
The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today’s production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today’s production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.
- 30 December 2023
- Published by Springer Nature
- p. 35-60
Open AccessEvolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead
The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today’s production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today’s production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.
- Open Access
- 28 September 2023
- Published by Springer Nature
- p. 1-26
Evolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead
The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today’s production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today’s production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.
- 28 September 2023
- Published by Springer Nature
- p. 1-26
Open AccessEvolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead
The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today’s production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today’s production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.
- Open Access
- 7 March 2023
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (2) , 60
Laser Tracker-Based on-the-Fly Machine Tool Calibration without Real-Time Synchronization
Consistent high volumetric performance of machine tools is an essential requirement for high-quality machining. Periodic machine tool calibration ensures said performance and allows for timely corrective actions preventing scrap or rework. Reducing the duration of the calibration process decreases associated cost through non-productive downtime and allows for data acquisition in thermal real-time. The authors enhance an indirect calibration method based on measuring points within the machine volume using a laser tracker by removing the necessity for standstill. To circumvent requiring high fidelity space and time synchronization between metrology system and machine tool, only deviations perpendicular to the path are considered. To do so, the 3D laser tracker data are rotationally transformed such that one axis aligns with the motion direction and can subsequently be omitted as input data for the system of equations solving for geometric errors. Due to the absence of unique measurement-point-to-machine-point mapping, data alignment between nominal path and measurement data is proposed as an iterative alignment process of points to path. The method is tested simulatively and experimentally. It demonstrated conformity to the simulation as well as to the pre-existing calibration method based on laser trackers and shows good agreement with the direct calibration device API XD Laser.
- 7 March 2023
- Published by MDPI AG in Journal of Manufacturing and Materials Processing
- Vol. 7 (2) , 60
Open AccessLaser Tracker-Based on-the-Fly Machine Tool Calibration without Real-Time Synchronization
Consistent high volumetric performance of machine tools is an essential requirement for high-quality machining. Periodic machine tool calibration ensures said performance and allows for timely corrective actions preventing scrap or rework. Reducing the duration of the calibration process decreases associated cost through non-productive downtime and allows for data acquisition in thermal real-time. The authors enhance an indirect calibration method based on measuring points within the machine volume using a laser tracker by removing the necessity for standstill. To circumvent requiring high fidelity space and time synchronization between metrology system and machine tool, only deviations perpendicular to the path are considered. To do so, the 3D laser tracker data are rotationally transformed such that one axis aligns with the motion direction and can subsequently be omitted as input data for the system of equations solving for geometric errors. Due to the absence of unique measurement-point-to-machine-point mapping, data alignment between nominal path and measurement data is proposed as an iterative alignment process of points to path. The method is tested simulatively and experimentally. It demonstrated conformity to the simulation as well as to the pre-existing calibration method based on laser trackers and shows good agreement with the direct calibration device API XD Laser.
- Open Access
- 8 February 2023
- Published by Springer Nature
- p. 1-25
Evolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead
The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today’s production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today’s production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.
- 8 February 2023
- Published by Springer Nature
- p. 1-25
Open AccessEvolving the Digital Industrial Infrastructure for Production: Steps Taken and the Road Ahead
The Internet of Production (IoP) leverages concepts such as digital shadows, data lakes, and a World Wide Lab (WWL) to advance today’s production. Consequently, it requires a technical infrastructure that can support the agile deployment of these concepts and corresponding high-level applications, which, e.g., demand the processing of massive data in motion and at rest. As such, key research aspects are the support for low-latency control loops, concepts on scalable data stream processing, deployable information security, and semantically rich and efficient long-term storage. In particular, such an infrastructure cannot continue to be limited to machines and sensors, but additionally needs to encompass networked environments: production cells, edge computing, and location-independent cloud infrastructures. Finally, in light of the envisioned WWL, i.e., the interconnection of production sites, the technical infrastructure must be advanced to support secure and privacy-preserving industrial collaboration. To evolve today’s production sites and lay the infrastructural foundation for the IoP, we identify five broad streams of research: (1) adapting data and stream processing to heterogeneous data from distributed sources, (2) ensuring data interoperability between systems and production sites, (3) exchanging and sharing data with different stakeholders, (4) network security approaches addressing the risks of increasing interconnectivity, and (5) security architectures to enable secure and privacy-preserving industrial collaboration. With our research, we evolve the underlying infrastructure from isolated, sparsely networked production sites toward an architecture that supports high-level applications and sophisticated digital shadows while facilitating the transition toward a WWL.
- Open Access
- 8 September 2022
- Published by Elsevier in Measurement: Sensors
- Vol. 24
Model-driven development of interoperable communication interfaces for FAIR sensor services
- 8 September 2022
- Published by Elsevier in Measurement: Sensors
- Vol. 24
Open AccessModel-driven development of interoperable communication interfaces for FAIR sensor services
- 25 September 2020
- Published by Springer Nature
- p. 448-456
Domain-Specific Language for Sensors in the Internet of Production
- 25 September 2020
- Published by Springer Nature
- p. 448-456
Domain-Specific Language for Sensors in the Internet of Production
- 20 August 2020
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 33 (9) , 869-879
A low-cost camera-based tracking theodolite for large-scale metrology applications
A wide spectrum of Large-Scale Metrology instruments for measuring 3D positions of mobile targets with different levels of accuracy, operational ranges and corresponding cost exist. However, future assembly paradigms and further industrial applications would benefit from a system with ultra low-cost targets and an accuracy in the order of magnitude of 1 mm, which is currently not available. Therefor the authors propose a camera-based tracking theodolite as a novel instrument for measuring 3D positions of printed visual markers. The approach is implemented as a prototype composed of two rotation stages with built-in encoders, a state-of-the-art industrial CMOS-camera and lens with fixed focal length in conjunction with printed chessboard targets. According mathematical models for the calculation of the targets’ position, kinematic error compensation and measurement uncertainty estimation are elaborated. Competitive experiments against a laser tracker show that the position of the marker can be measured with an absolute error below 1 mm and a statistical uncertainty close to 1 mm in a radius of 5 m, confirming the applicability of the developed concept for a novel Large-Scale Metrology instrument.
- 20 August 2020
- Published by Taylor & Francis in International Journal of Computer Integrated Manufacturing
- Vol. 33 (9) , 869-879
A low-cost camera-based tracking theodolite for large-scale metrology applications
A wide spectrum of Large-Scale Metrology instruments for measuring 3D positions of mobile targets with different levels of accuracy, operational ranges and corresponding cost exist. However, future assembly paradigms and further industrial applications would benefit from a system with ultra low-cost targets and an accuracy in the order of magnitude of 1 mm, which is currently not available. Therefor the authors propose a camera-based tracking theodolite as a novel instrument for measuring 3D positions of printed visual markers. The approach is implemented as a prototype composed of two rotation stages with built-in encoders, a state-of-the-art industrial CMOS-camera and lens with fixed focal length in conjunction with printed chessboard targets. According mathematical models for the calculation of the targets’ position, kinematic error compensation and measurement uncertainty estimation are elaborated. Competitive experiments against a laser tracker show that the position of the marker can be measured with an absolute error below 1 mm and a statistical uncertainty close to 1 mm in a radius of 5 m, confirming the applicability of the developed concept for a novel Large-Scale Metrology instrument.