HJHui Jia

Hui Jia

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Hui Jia has a total of 113 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Design of high-speed Ge/GaAs avalanche photodiodes for next-generation photonic integration

    by Haifeng Kan, Yutong Zhang, Mengxun Bai, Danqi Lei, Hui Jia, Haotian Zeng, Yangqian Wang, Huiwen Deng, Mingchu Tang, Siming Chen, et al.

    We present the design and numerical simulation of a top-illuminated Ge/GaAs avalanche photodiode (APD) with a separate absorption, charge, and multiplication structure operating at 1550 nm. The design targets a practical balance between high performance and low manufacturing cost for long-wavelength APDs. Leveraging high carrier mobility and the nearly lattice-matched Ge/GaAs interface, Ge/GaAs APDs provide a path to low-cost, monolithic integration of GaAs with silicon photonic platforms while meeting the demand for high-speed, low-noise photodetectors. Simulations indicate that a 10 μ m-diameter device achieves >30 GHz 3-dB bandwidth, a ∼224 GHz gain–bandwidth product, breakdown voltage of approximately −17 V, and low dark current (1.86 μ A). These results highlight the strong potential of the Ge/GaAs platform for next-generation high-speed photodetectors.

  • Open Access

    Modeling threading dislocation density evolution in Ge/Si during cyclic annealing

    by Xuanchang Zhang, Hui Jia, Haotian Zeng, Xueying Yu, Mateus G. Masteghin, Mengxun Bai, Hexing Wang, Danqi Lei, Huiwen Deng, Huiyun Liu, et al.

    A compact kinetic framework is developed to describe threading dislocation evolution in Ge/Si buffers by linking the final dislocation density to the initial defect level and an Arrhenius-weighted thermal budget that captures the combined effects of temperature, annealing time, and layer geometry. Despite extensive experimental progress in Ge-on-Si integration, optimization of growth and annealing parameters remains largely empirical, owing to the lack of a framework connecting processing conditions to defect evolution. Calibrated against electron channeling contrast imaging measurements from undoped and Sb-doped Ge/Si buffers with different annealing cycle counts, the model captures the overall reduction and saturation trends across the wafer set. This compact framework provides a practical means of assessing how initial defect density and accumulated thermal exposure influence final threading dislocation levels in thin Ge/Si buffers.

  • Open Access

    High‐Temperature Operation of All‐Molecular Beam Epitaxy InAs/GaAs Quantum Dot Lasers on V‐Grooved Si (001)

    by Jun Li, Haotian Zeng, Lifeng Bao, Jae‐Seong Park, Chong Chen, Yangqian Wang, Hexing Wang, Kongming Liu, Yutong Zhang, Makhayeni Mtunzi, et al.

    Realising thermally stable, one‐step‐grown InAs/GaAs quantum dot (QD) lasers on standard Si (001) is pivotal for cost‐effective and streamlined monolithic Si photonics. However, current state‐of‐the‐art solutions predominantly rely on hybrid growth schemes using virtual substrates, which introduce high costs and limit scalability. Here, we report thermally reliable, high‐performance QD lasers directly integrated on V‐grooved Si (001) substrates using a one‐step all‐molecular beam epitaxy (MBE) approach. By preserving V‐groove structural integrity and employing improved facet quality and cavity geometry optimisation, a significant enhancement in high‐temperature operation is realised. The as‐cleaved 5 × 2000 µm 2 device exhibits a room‐temperature threshold current of 42 mA and sustains lasing up to 150°C under pulsed injection, comparable to state‐of‐the‐art hybrid devices utilising facet coatings. Continuous‐wave operation is achieved up to 70°C with a room‐temperature threshold current of 73 mA. These results demonstrate the viability of the one‐step, all‐MBE V‐groove approach for realising thermally reliable, cost‐effective, and scalable monolithic light source on Si photonics platforms.


  • Open Access

    Mid-infrared InAs/InP quantum-dot lasers

    by Yangqian Wang, Hui Jia, Jae-Seong Park, Haotian Zeng, Igor P. Marko, Matthew Bentley, Khalil El Hajraoui, Shangfeng Liu, Bo Yang, Calum Dear, et al.

    Mid-infrared semiconductor lasers operating in the 2.0–5.0 μm spectral range play an important role for various applications, including trace-gas detection, biomedical analysis, and free-space optical communication. InP-based quantum-well (QW) and quantum-dash (Qdash) lasers are promising alternatives to conventional GaSb-based QW lasers because of their lower cost and mature fabrication infrastructure. However, they suffer from high threshold current density ( J th ) and limited operation temperatures. InAs/InP quantum-dot (QD) lasers theoretically offer lower J th owing to their three-dimensional carrier confinement. Nevertheless, achieving high-density, uniform InAs/InP QDs with sufficient gain for lasing over 2 μm remains a major challenge. Here, we report the first demonstration of mid-infrared InAs/InP QD lasers emitting beyond 2 μm. Five-stack InAs/In 0.532 Ga 0.468 As/InP QDs grown by molecular-beam epitaxy exhibit room-temperature photoluminescence at 2.04 μm. Edge-emitting lasers achieve lasing at 2.018 μm with a low J th of 589 A cm −2 and a maximum operation temperature of 50 °C. Notably, the J th per layer (118 A cm −2 ) is the lowest ever reported for room-temperature InP-based mid-infrared lasers, outperforming QW/Qdash counterparts. These results pave the way for a new class of low-cost, high-performance mid-infrared light sources using InAs/InP QDs, marking a notable step forward in the development of mid-infrared semiconductor lasers.


  • InAs/InAlGaAs Quantum Dot Lasers on InP and Si

    by Hui Jia, Jae-Seong Park, Jun Li, Kongming Liu, Jiajing Yuan, Calum Dear, Haotian Zeng, Yangqian Wang, Khalil El Hajraoui, Shangfeng Liu, et al.

    We report the development of InAs/InAlGaAs quantum-dot (QD) lasers grown on both InP and Si substrates. A modified indium flush technique was employed to control dot-height distribution and tailor the emission wavelength by using a strained partial capping layer. Using this approach, 7-stack InAs/InAlGaAs QD lasers on InP substrates exhibit a low threshold current density (Jth) of 63 A/cm2 per QD layer and high-temperature operation up to 140 °C. Furthermore, electrically pumped InAs/InAlGaAs QD lasers directly grown on Si are also demonstrated, with a low Jth of 1.35 kA/cm2 and a maximum operating temperature of 100 °C. This work highlights the effectiveness of the modified indium flush in achieving high-performance InAs/InAlGaAs QD lasers. These results represent a significant step forward in the development of high-performance C-/L-band QD lasers in the InAs/InAlGaAs/InP material system for Si photonics.

  • Open Access

    Ge-rich homogenous GeSi alloying induced by Si–Ge interdiffusion under high temperature thermal cyclic annealing

    by Xueying Yu, Hui Jia, Wenyu Hu, Chong Chen, Haotian Zeng, Mateus G. Masteghin, Makhayeni Mtunzi, Huiwen Deng, Yutong Zhang, Suguo Huo, et al.

    Thermal cyclic annealing (TCA) is recognized as the key process in improving Ge film quality during epitaxial growth on Si substrates. In Ge-on-Si systems, annealing temperatures rarely exceed 900 °C due to the limitation of the Ge melting point (938 °C). In this study, ultra-high temperature TCA is performed on a series of 500 nm Ge buffer layers grown on Si (001), with the upper limit ranging from 900 to 950 °C. The structural properties of the Ge thin films are investigated, indicating that an optimized TCA profile occurs with the upper annealing temperature just below the melting point of Ge. Higher annealing temperature above the melting temperature of Ge results in homogeneous alloying of Ge and Si, induced by enhanced Si diffusion into Ge. This process produces a Ge0.75Si0.25 layer with a threading dislocation density of 3.5 × 108 cm-2 and a surface roughness of 3 nm. These findings inspire a novel approach for creating Ge-rich GeSi layers on Si, which potentially benefits the Ge/GeSi/Si (001) heterostructures and their applications in advanced Si-based semiconductor devices.

  • Open Access

    C-band InAs/InP quantum dots: alternative growth versus indium-flush for self-assembled growth

    by Jiajing Yuan, Hui Jia, Calum Dear, Huiwen Deng, Mateus G Masteghin, Khalil El Hajraoui, Jun Li, Kongming Liu, Mengxun Bai, Jakob B Wagner, et al.

    1550 nm InAs/InP quantum dot (QD) lasers are critical for C-band optical communication. To realise narrow photo-luminescence linewidth emission in this wavelength range, the indium flush (IF) technique for self-assembled QDs and the alternative growth (AG) technique have been developed, enabling wavelength tuning and control of dot uniformity. This work investigates the stacking effect on nanostructures grown by these two methods by comparing five-stacked AG and IF nanostructures with identical spacer thickness. Structural and optical characterisations were performed using scanning transmission electron microscopy, atomic force microscopy, and photoluminescence measurements. The IF approach produces truncated, height-controlled QDs with reduced strain accumulation across stacked layers. In contrast, AG samples display quantum well-like morphology with sharp interfaces and no observable dislocations, but fail to consistently produce distinct QD nanostructures. These results suggest that IF provides a more reliable optimisation strategy for achieving C-band QDs within the framework of self-assembled growth, whereas AG requires further optimisation for use in InP-based systems.

  • Open Access

    Optimisation of argon plasma pre-treatment for enhanced silicon surface preparation for germanium epitaxy

    by Xuanchang Zhang, Haotian Zeng, Hui Jia, Xueying Yu, Suguo Huo, Makhayeni Mtunzi, Huiwen Deng, Jaeseong Park, Hexing Wang, Alwyn Seeds, et al.

    Heteroepitaxial growth of Si-based semiconductor materials has become an efficient method for high-performance group-IV and III–V optoelectronic and electronic devices. As-manufactured epi-ready Si wafers frequently retain molecular residues even after high-temperature thermal deoxidation. Consequently, additional surface conditioning can be required to achieve the cleanliness and morphology necessary for high-quality epitaxial growth. This study evaluates the effectiveness of Ar plasma pre-treatment for surface preparation of Si substrates, which is used as a platform for heteroepitaxial growth of group-IV and III–V materials in molecular beam epitaxy systems. In this paper, a brief Ar plasma exposure (3 min at 30 SCCM) effectively removed native oxides and preserved atomically smooth surfaces, with root-mean-square roughness below 0.25 nm. Ge layers grown on plasma-treated offcut Si substrates exhibited a threading dislocation density of 6.9 × 107cm−2, representing a ∼55% reduction compared to non-treated substrates (1.3 × 108cm−2). These findings demonstrate that Ar plasma pre-treatment provides a reliable and thermally efficient pathway for enhancing Si surface quality and supporting low-defect heteroepitaxial growth.


  • Open Access

    MBE growth of InAs/GaAs quantum dot lasers on V-grooved (001) Si

    by Makhayeni Mtunzi, Haotian Zeng, Lifeng Bao, Chong Chen, Jae-Seong Park, Huiwen Deng, Yangqian Wang, Hui Jia, Jun Li, Hexing Wang, et al.

    The monolithic integration of InAs/GaAs quantum dot (QD) lasers on the silicon platform is critical for current high-speed optical communication and computing systems. However, the heteroepitaxial growth of high-performance InAs/GaAs QD lasers on complementary metal-oxide-semiconductor-compatible on-axis (001) Si substrates remains challenging due to the crystalline defects arising from substantial material dissimilarities. In this work, we present InAs/GaAs QD lasers grown entirely by molecular beam epitaxy (MBE) directly on pre-patterned V-grooved (001) Si substrates. Unlike previous approaches that combine MOCVD and MBE processes or employ homoepitaxial Si regrowth to form (111) facets, our method uses substrates with pre-defined (111) facet exposure, avoiding additional surface engineering. The combination of the V-grooved geometry of the substrate and the stepped growth method enables antiphase boundary-free GaAs buffer growth. Further optimisation of InAlAs/GaAs dislocation filtering layers and QD growth parameters yielded a threading dislocation density of 2.91 × 107 cm-2 and room-temperature emission around 1.3 μm was achieved. With the improved buffer, O-band lasing up to 90 °C has been demonstrated for InAs/GaAs QD lasers. This structure offers a simplified and thermally robust route for monolithic QD laser integration, potentially supporting scalable silicon photonic platforms.


  • Open Access

    GaAs Growth on Ge‐Buffered Discontinuous (111)‐Faceted V‐Groove Silicon Substrates

    by Makhayeni Mtunzi, Hui Jia, Mateus G. Masteghin, Yaonan Hou, Haotian Zeng, Huiwen Deng, Jae‐Seong Park, Chong Chen, Jun Li, Xingzhao Yan, et al.

    The propagation of antiphase boundaries (APBs) and threading dislocations (TDs) poses a significant impediment to the realisation of high‐quality group III–V semiconductors grown on group IV platforms. The complete annihilation of APBs and a substantial reduction in threading dislocation density (TDD) are essential for achieving high‐efficiency III–V devices compatible with complementary metal‐oxide semiconductor (CMOS) technology. In this study, a novel growth technique is proposed and developed to fabricate a faceted germanium (Ge) buffer on a discontinuous (111)‐faceted V‐groove silicon (Si) substrate with a 500 nm flat ridge width. Subsequently, a GaAs buffer is grown on the Ge/V‐groove Si virtual substrate using a ramped temperature growth process to minimise the prevalence of line and planar defects in the buffer structure. An APB‐free GaAs buffer is successfully achieved, as confirmed by cross‐sectional and plan‐view transmission electron microscopy (TEM) and atomic force microscopy (AFM) analyses. The faceted Ge buffer layer obtained through this innovative approach alleviates the stringent fabrication requirements and intricate processing typically associated with conventional continuous V‐groove Si substrates. This advancement facilitates the development of photonic integrated circuits by providing a simplified and efficient alternative substrate solution.