Shubo Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Shubo Gao has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Kun Zhou
Singapore Centre for 3D Printing, School of Mechanical and Aerospace Engineering, Nanyang Technological University
4 shared publications - Zhiheng Hu
Singapore Institute of Manufacturing Technology (SIMTech), Agency for Science, Technology and Research (A*STAR)
3 shared publications - Aditya Ramesh
Internal Combustion Engine Laboratory, Department of Mechanical Engineering, Indian Institute of Technology Madras, Chennai 600036, India
2 shared publications Hang Li Seet
Singapore Institute of Manufacturing Technology (SIMTech) Agency for Science Technology and Research (A*STAR) 5 Cleantech Loop #01‐01 CleanTech Two Block B Singapore 636732 Republic of Singapore
2 shared publicationsKun Zhou
2 shared publications- Matteo Seita
Department of Engineering, University of Cambridge, Cambridge, UK
2 shared publications
Latest Publications
- Open Access
- 5 January 2026
- Published by Taylor & Francis in Materials Research Letters
- Vol. 14 (2) , 160-168
Dilution-induced compositional transformation and mechanical degradation in multi-material directed energy deposition
- 5 January 2026
- Published by Taylor & Francis in Materials Research Letters
- Vol. 14 (2) , 160-168
Open AccessDilution-induced compositional transformation and mechanical degradation in multi-material directed energy deposition
- Open Access
- 9 August 2025
- Published by Elsevier in Materials & Design
- Vol. 258
High-strength and high-conductivity pure copper by powder bed fusion with a medium-power infrared laser
- 9 August 2025
- Published by Elsevier in Materials & Design
- Vol. 258
Open AccessHigh-strength and high-conductivity pure copper by powder bed fusion with a medium-power infrared laser
- 15 March 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 293
Computationally guided composition optimization of Ni50–xFe25Co25Cux for additive manufacturing
- 15 March 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 293
Computationally guided composition optimization of Ni50–xFe25Co25Cux for additive manufacturing
- Open Access
- 15 November 2024
- Published by Springer Nature in Research Square
3D printing of ultra-strong Co-free maraging steel via multifunctional alloy design
3D printing is a revolutionary technology that has garnered significant attention due to its capability to produce parts with complex geometries and exceptional properties. However, one potential challenge associated with 3D printing is the increased susceptibility to cracking resulting from the incorporation of high alloying elements. Furthermore, the formation of brittle Laves phases is frequently observed in cobalt-containing maraging steels, which significantly compromises the ductility of these materials following heat treatment. Here, we demonstrate that by minimizing the crack susceptibility of the steel and introducing coherent Ni3(Ti, Al) nanoprecipitates with a core-shell structure via multifunctional alloy design, we have simultaneously addressed these challenges. Our cobalt-free maraging steel exhibits exceptional mechanical properties, including a tensile strength of 2.3 GPa and an elongation of 5.7%. Its sustainability renders it a more promising alternative to conventional alloys. This study provides a potential avenue for the development of cost-effectiveness and high-performance alloys.
- 15 November 2024
- Published by Springer Nature in Research Square
Open Access3D printing of ultra-strong Co-free maraging steel via multifunctional alloy design
3D printing is a revolutionary technology that has garnered significant attention due to its capability to produce parts with complex geometries and exceptional properties. However, one potential challenge associated with 3D printing is the increased susceptibility to cracking resulting from the incorporation of high alloying elements. Furthermore, the formation of brittle Laves phases is frequently observed in cobalt-containing maraging steels, which significantly compromises the ductility of these materials following heat treatment. Here, we demonstrate that by minimizing the crack susceptibility of the steel and introducing coherent Ni3(Ti, Al) nanoprecipitates with a core-shell structure via multifunctional alloy design, we have simultaneously addressed these challenges. Our cobalt-free maraging steel exhibits exceptional mechanical properties, including a tensile strength of 2.3 GPa and an elongation of 5.7%. Its sustainability renders it a more promising alternative to conventional alloys. This study provides a potential avenue for the development of cost-effectiveness and high-performance alloys.
- Top Cited Papers
- 9 May 2024
- Published by Elsevier in International Journal of Machine Tools and Manufacture
- Vol. 199
Additive manufacturing of metallic metamaterials with enhanced mechanical properties enabled by microstructural and structural design
- 9 May 2024
- Published by Elsevier in International Journal of Machine Tools and Manufacture
- Vol. 199
Top Cited PapersAdditive manufacturing of metallic metamaterials with enhanced mechanical properties enabled by microstructural and structural design
- 25 March 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (34) , e2307825
Enhanced Plastic Stability: Achieving High Performance in a Al6xxx Alloy Fabricated by Additive Manufacturing
Additive manufacturing (AM) facilitates the creation of materials with unique microstructural features and distinctive phenomena as compared to conventional manufacturing methods. Among the various well‐fabricated AM alloys, aluminum alloys garner substantial attention due to their extensive applications in the automotive and aerospace industries. In this work, an Al6xxx alloy is successfully fabricated with outstanding performance. A nucleation agent is introduced to diminish the susceptibility to cracking during the AM process, thereby inducing a heterogeneous microstructure in this alloy. However, the introduction of ultrafine grains induces plastic instability, evidenced by the presence of Lüders band. This work investigates the evolution of the Lüders band and the strategy to reduce their undesirable effect. The heterogeneity destabilizes the band propagation and thus deteriorates the ductility. Through a T6 heat treatment, the local Lüders strain decreases from 10.0% to 6.2%, leading to a substantial enhancement in plastic stability. With the increase in grain growth and the enlargement of coarse grain regions, the mismatch between the local and macroscopic Lüders strain disappears. Importantly, the strength and the thermal conductivity are concurrently increased. The findings demonstrate the significance of ensuring plastic stability to achieve improved strength‐ductility trade‐off in AM alloys with heterogeneous microstructures.
- 25 March 2024
- Published by Wiley in Advanced Materials
- Vol. 36 (34) , e2307825
Enhanced Plastic Stability: Achieving High Performance in a Al6xxx Alloy Fabricated by Additive Manufacturing
Additive manufacturing (AM) facilitates the creation of materials with unique microstructural features and distinctive phenomena as compared to conventional manufacturing methods. Among the various well‐fabricated AM alloys, aluminum alloys garner substantial attention due to their extensive applications in the automotive and aerospace industries. In this work, an Al6xxx alloy is successfully fabricated with outstanding performance. A nucleation agent is introduced to diminish the susceptibility to cracking during the AM process, thereby inducing a heterogeneous microstructure in this alloy. However, the introduction of ultrafine grains induces plastic instability, evidenced by the presence of Lüders band. This work investigates the evolution of the Lüders band and the strategy to reduce their undesirable effect. The heterogeneity destabilizes the band propagation and thus deteriorates the ductility. Through a T6 heat treatment, the local Lüders strain decreases from 10.0% to 6.2%, leading to a substantial enhancement in plastic stability. With the increase in grain growth and the enlargement of coarse grain regions, the mismatch between the local and macroscopic Lüders strain disappears. Importantly, the strength and the thermal conductivity are concurrently increased. The findings demonstrate the significance of ensuring plastic stability to achieve improved strength‐ductility trade‐off in AM alloys with heterogeneous microstructures.
- Top Cited PapersOpen Access
- 30 October 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Additive manufacturing of alloys with programmable microstructure and properties
In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy’s solidification structure, we can ‘program’ recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM.
- 30 October 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Top Cited PapersOpen AccessAdditive manufacturing of alloys with programmable microstructure and properties
In metallurgy, mechanical deformation is essential to engineer the microstructure of metals and to tailor their mechanical properties. However, this practice is inapplicable to near-net-shape metal parts produced by additive manufacturing (AM), since it would irremediably compromise their carefully designed geometries. In this work, we show how to circumvent this limitation by controlling the dislocation density and thermal stability of a steel alloy produced by laser powder bed fusion (LPBF) technology. We show that by manipulating the alloy’s solidification structure, we can ‘program’ recrystallization upon heat treatment without using mechanical deformation. When employed site-specifically, our strategy enables designing and creating complex microstructure architectures that combine recrystallized and non-recrystallized regions with different microstructural features and properties. We show how this heterogeneity may be conducive to materials with superior performance compared to those with monolithic microstructure. Our work inspires the design of high-performance metal parts with artificially engineered microstructures by AM.
- Open Access
- 10 October 2023
- Published by Taylor & Francis in Virtual and Physical Prototyping
- Vol. 18 (1)
Heterogeneous microstructure and mechanical properties of Monel alloy parts repaired by laser directed energy deposition
- 10 October 2023
- Published by Taylor & Francis in Virtual and Physical Prototyping
- Vol. 18 (1)
Open AccessHeterogeneous microstructure and mechanical properties of Monel alloy parts repaired by laser directed energy deposition
- 9 March 2023
- Published by Elsevier in Scripta Materialia
- Vol. 230
Enhanced strength-ductility synergy in brittle high borated steel by tailoring strain hardening behaviour
- 9 March 2023
- Published by Elsevier in Scripta Materialia
- Vol. 230
Enhanced strength-ductility synergy in brittle high borated steel by tailoring strain hardening behaviour
- Top Cited PapersOpen Access
- 1 November 2020
- Published by Elsevier in Acta Materialia
- Vol. 200, 366-377
Recrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting
- 1 November 2020
- Published by Elsevier in Acta Materialia
- Vol. 200, 366-377
Top Cited PapersOpen AccessRecrystallization-based grain boundary engineering of 316L stainless steel produced via selective laser melting