LBLeo Scott Blankenship

Leo Scott Blankenship

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Leo Scott Blankenship has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Understanding the Relationship Between Synthetic Conditions and H 2 Uptake Capacity in Oxidatively Activated Turbostratic Carbons through Machine Learning

    by L Scott Blankenship, Filippo Federici Canova, David Gao, Robert Mokaya

    The relationship between synthesis parameters, porosity, and H 2 uptake in activated carbons is a field of significant investigation and discussion. Conclusions about these relationships are typically drawn from limited datasets of carbons produced for a given publication, and are not able to consider the interplay between various synthesis parameters and properties of the resultant turbostratic carbons. We present the first attempt at understanding the relationship between synthesis parameters and H 2 uptake capacity in turbostratic carbons, using the single point pore volume as a proxy due to the dearth of available high pressure H 2 isotherms. The methods used herein have exploited a dataset of 237 samples to determine the most important synthesis parameters in determining the porosity of the product and thus their suitability for high pressure H 2 storage applications.

  • Open Access

    Highly porous carbons from hydrochar by means of a controlled physical activation process and their hydrogen storage performance

    by Ana Fernández-Lera, María Dolores Casal, Stephen Otieno, Leo Scott Blankenship, Robert Mokaya, Teresa Valdés-Solís, Marta Sevilla


  • Open Access

    Evaluation of the influence of various metals in iron-rich acid mine drainage on crystallinity, morphology and textural properties of iron-based MIL-101

    by Keaoleboga Mosupi, Christophe A. Ndamyabera, Mike Masukume, L. Scott Blankenship, Robert Mokaya, Nicholas M. Musyoka, Henrietta W. Langmi

    Synthesis of a series of iron-based MIL-101 (MIL = materials institute lavoisier) using iron (Fe) extracted from acid mine drainage waters (AMD) and terephthalic acid extracted from waste polyethylene terephthalate is reported here. Specifically, various metal concentrations that make up AMD are evaluated for their effects on crystallinity, morphological and textural properties of the MOFs. Each metal (Al, Ca, Mg, Mn and Zn) is paired with Fe (dominant metal in AMD) to make bimetallic combinations. Two metals are also paired with Fe to prepare the trimetallic combination series. Generally, MIL-101 was formed with different degrees of crystallinity. Only trace concentrations (2 g−1 with the highest pore volume being 0.91 cm3 g−1. At 77 K and 1 bar, a hydrogen uptake of 1.44 wt% was obtained for MIL-101 from FeMn combination, which also exhibited the highest surface area. This MOF further displayed the highest CO2 uptake of 6.17 mmol g−1 at 298 K and 20 bar. The study proves that at low concentrations, metals within AMD result in MOFs with comparable properties to those derived from pristine precursors. This offers the possibility to use raw AMD directly as precursor for the synthesis of Fe-MOFs, without the need to first extract Fe from AMD.

  • Open Access

    Toward Faster Adsorbent Screening via the Multisite-Whittaker Approximation

    by L. Scott Blankenship, Paul Iacomi

    Measurement of adsorption isotherms is a time-consuming process, which is required for screening adsorbents for various applications. We present a simple method for accurately predicting isotherms for temperatures within 50 K of a single measured isotherm, indeed making it possible to determine an entire adsorption surface, that is, loading as a function of both temperature and pressure. The methodology is an expansion of the Tóth potential approach applied by Whittaker [Whittaker, P. B.; Wang, X.; Regenauer-Lieb, K.; and Chua, H. T. Predicting isosteric heats for gas adsorption. Physical Chemistry Chemical Physics 2013, 15, 473-482.] The implementation of such a theory has been deployed in the open-source adsorption processing software pyGAPS in order to improve reproducibility.


  • Open Access

    A descriptor guiding the selection of catalyst supports for ammonia synthesis

    by Andreas Weilhard, Ilya Popov, Emerson C. Kohlrausch, Gazi N. Aliev, L. Scott Blankenship, Luke T. Norman, Sadegh Ghaderzadeh, Louise Smith, Mark Isaacs, James O'SHea, et al.

    The efforts to increase the active surface area of catalysts led to reduction of metal particle size, down to single metal atoms. This results in increasing importance of support–metal interactions. We demonstrate the mechanisms through which the support influences catalytic activity of nanoclusters: the support electronics, described by the O 2p energy level, and the support surface chemistry, determined by the density of Lewis base sites. Using Ru nanoclusters, our study shows that these parameters can be effectively captured within a single catalyst support descriptor (CSD). The apparent activation energy and turnover frequency (TOF) for the ammonia synthesis correlates strongly with CSD measured for the series Ru/MgO, Ru/Sc2O3, Ru/CeO2, Ru/La2O3, and Ru/Y2O3. Furthermore, the study demonstrates that CSD correlates linearly with the binding strength of N–Ru in nanocluster, thereby providing a direct link between the catalyst's surface chemistry and the nature of the support. The catalyst support descriptor developed in this study serves as a simple yet powerful tool for selecting the optimal support material to maximise the activity of metal nanoclusters without altering the metal itself.


  • Open Access

    Ultra-high surface area ionic-liquid-derived carbons that meet both gravimetric and volumetric methane storage targets

    by Nawaf Albeladi, L. Scott Blankenship, Robert Mokaya

    Activation of N-rich and O-poor carbonised matter from ionic liquids yields ultraporous carbon (4000 m2 g−1 and 3.3 cm3 g−1) with high packing density that translates to methane uptake of up to 0.53 g g−1 and 289 cm3 (STP) cm−3 at 25 °C and 100 bar.


  • Open Access

    A simple, sustainable route to flexible microporous carbon cloth for energy storage applications

    by Thria Alkhaldi, L. Scott Blankenship, Robert Mokaya

    Activated carbon cloth (ACC) has the potential to be extremely useful in gas capture and storage applications as it combines high porosity, robustness, and flexibility with ease of handling. While it has been produced by a few researchers, the synthesis methods used to date either do not yield a product with high porosity, or if appropriate textural properties are achieved the synthesis is complex and arduous. Following a systematic study, we show that an almost exclusively microporous flexible ACC can be achieved with surface area >1900 m2 g−1 via stabilisation with NH4Cl only, followed by activation with benign activating agent potassium oxalate (PO). After extensive optimisation and simplification of the process, it was found that the stabilisation step can be omitted in a synthesis route requiring only a simple carbonisation step to produce a flexible microporous carbon with surface area >2200 m2 g−1, thus further reducing the need for additional solvents and reagents. The CO2 and CH4 uptake of the ACCs developed in this work is comparable to that previously reported for flexible porous carbons prepared via more complicated routes and the porosity of the ACCs can be tuned to specific gas uptake applications according to the synthesis conditions.


  • Open Access

    A simple, sustainable route to flexible microporous carbon cloth for energy storage applications

    by Thria Alkhaldi, L. Scott Blankenship, Robert Mokaya

    Activated carbon cloth (ACC) has the potential to be extremely useful in gas capture and storage applications as it combines high porosity, robustness, and flexibility with ease of handling. While it has been produced by a few researchers, the synthesis methods used to date either do not yield a product with high porosity, or if appropriate textural properties are achieved the synthesis is com- plex and arduous. Following a systematic study, we show that an almost exclusively microporous flexible ACC can be achieved with surface area >1900 m2 g−1 via stabilisation with NH4Cl only, followed by activation with benign activating agent potassium oxalate (PO). After extensive opti- misation and simplification of the process, it was found that the stabilisation step can be omitted in a synthesis route requiring only a simple carbonisation step to produce a flexible microporous carbon with surface area >2200 m2 g−1, thus further reducing the need for additional solvents and reagents. The CO2 and CH4 uptake of the ACCs developed in this work is comparable to that previously reported for flexible porous carbons prepared via more complicated routes and the porosity of the ACCs can be tuned to specific gas uptake applications according to the synthesis conditions.

  • Open Access

    Brute force determination of the optimum pore sizes for CO2 uptake in turbostratic carbons

    by L. Scott Blankenship, Nawaf Albeladi, Thria Alkhaldi, Asma Madkhali, Robert Mokaya

    The relationship between porosity within a given pore size range, and uptake of CO2 as a function of pressure.


  • Open Access

    Brute force determination of the optimum pore sizes forCO2 uptake

    by L. Scott Blankenship, Nawaf Albeladi, Thria Alkhaldi, Asma Madkhali, Robert Mokaya

    Porosity, and in particular pore size is the one of the most important considerations in the development of porous carbons for CO2 capture. Current methods for determining the optimum pore size for adsorption of CO2 either make very broad assumptions (in computational studies), or are not sufficiently thorough (in experimental studies). Herein we present a brute force, first principles method for determining the range of pore sizes, Ω, best suited to adsorption of a given sorptive at a range of pressures. This is then used to determine Ω for CO2 in a broad pressure range according to N2 porosimetry. The analysis is then extended to other porosimetric sorptives and combinations thereof to assess their efficacy in determining Ω for CO2