Shu Qin
Shu Qin has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
Chung Chan
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, Massachusetts 02115
1 shared publicationJames D. Bernstein
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, Massachusetts 02115
1 shared publication- Junzhao Shao
School of Mechanical and Automotive Engineering, Xiamen University of Technology, Xiamen, Fujian, P. R. China
1 shared publication Stuart Denholm
Eaton Corporation, Semiconductor Equipment Division, Beverly, Massachusetts 01915
1 shared publication- Wei Liu
School of Minerals Processing and Bioengineering, Central South University, Changsha, P.R. China
1 shared publication Zhuofan Zhao
Plasma Science and Microelectronics Laboratory, Department of Electrical and Computer Engineering, Northeastern University, Boston, Massachusetts 02115
1 shared publication
Latest Publications
- 24 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 1855-1860
Ultrashallow Junction (USJ) Fabrication by Advanced Ion Implantation Processes
For advanced CMOS device process, a preamorphization implant (PAI) procedure had been carried on source and drain (SD) lightly doped source and drain (LDD), heavily doped source and drain (HDD), and contact implants before an ultralow energy (ULE) beamline (BL)-based implant to depress the channeling effect for lower OFF-current and short channel effect (SCE). One-step plasma doping (PLAD) was utilized to replace this two-step BL implant process for the pMOS device because PLAD has an in situ real-time controllability for less channeling effect. The PLAD using B 2 H 6 gas with ULE high dose regime was utilized for this application. It significantly reduces cost and increases throughput because this one low-cost PLAD module eliminates PAI BL implant. The pMOS devices also exhibit significant performance improvements, including ~30% lower contact resistances ( $\boldsymbol {R}_{\text {CS}}$ ), similar threshold voltage ( $\boldsymbol {V}_{\text {T}}$ ) and subthreshold voltage (SV T ) characteristics, and ~8% higher drive currents ( ${I}_{\textbf {DS}}$ ) without degrading OFF-current ( ${I} _{ \mathrm{\scriptscriptstyle OFF}}$ ).
- 24 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 68 (4) , 1855-1860
Ultrashallow Junction (USJ) Fabrication by Advanced Ion Implantation Processes
For advanced CMOS device process, a preamorphization implant (PAI) procedure had been carried on source and drain (SD) lightly doped source and drain (LDD), heavily doped source and drain (HDD), and contact implants before an ultralow energy (ULE) beamline (BL)-based implant to depress the channeling effect for lower OFF-current and short channel effect (SCE). One-step plasma doping (PLAD) was utilized to replace this two-step BL implant process for the pMOS device because PLAD has an in situ real-time controllability for less channeling effect. The PLAD using B 2 H 6 gas with ULE high dose regime was utilized for this application. It significantly reduces cost and increases throughput because this one low-cost PLAD module eliminates PAI BL implant. The pMOS devices also exhibit significant performance improvements, including ~30% lower contact resistances ( $\boldsymbol {R}_{\text {CS}}$ ), similar threshold voltage ( $\boldsymbol {V}_{\text {T}}$ ) and subthreshold voltage (SV T ) characteristics, and ~8% higher drive currents ( ${I}_{\textbf {DS}}$ ) without degrading OFF-current ( ${I} _{ \mathrm{\scriptscriptstyle OFF}}$ ).
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (11) , 5028-5032
AC-SSRM 2-D Cross-Sectional Doping Profiling for DRAM Access Devices Contact Implants
The doping technologies and doping profiling metrologies are facing huge challenges for nonplanar or 3-D devices and structures. Ambient-controlled scanning spreading resistance microscopy (AC-SSRM) has been developed and well established for 2-D cross-sectional doping profiling measurements on dynamic random access memory (DRAM) access devices. Good correlations between 2-D doping profiling measurements and device electrical performance have been demonstrated. Thanks to AC-SSRM 2-D cross-sectional doping profiling measurements, plasma doping (PLAD) process has been demonstrated beneficial on nonplanar or 3-D device manufacturing.
- 11 September 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 67 (11) , 5028-5032
AC-SSRM 2-D Cross-Sectional Doping Profiling for DRAM Access Devices Contact Implants
The doping technologies and doping profiling metrologies are facing huge challenges for nonplanar or 3-D devices and structures. Ambient-controlled scanning spreading resistance microscopy (AC-SSRM) has been developed and well established for 2-D cross-sectional doping profiling measurements on dynamic random access memory (DRAM) access devices. Good correlations between 2-D doping profiling measurements and device electrical performance have been demonstrated. Thanks to AC-SSRM 2-D cross-sectional doping profiling measurements, plasma doping (PLAD) process has been demonstrated beneficial on nonplanar or 3-D device manufacturing.
- 1 September 1995
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 13 (5) , 1994-1998
Charging effects in plasma immersion ion implantation for microelectronics
The charging effects of plasma immersion ion implantation (PIII) doping experiments have been investigated using a dynamic sheath model and PDP1 plasma simulation code. When the target has a dielectric film, charge accumulation during PIII can have a profound impact on doping results. Under certain process conditions, it can significantly reduce implant energy and dose and thereby alter the implant profile. In addition, it may degrade device reliability, especially for ultralarge-scale integrated circuit devices. In order to minimize charging effects, shorter pulse widths along with moderate values of plasma density and pulse potential should be used.
- 1 September 1995
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures Processing, Measurement, and Phenomena
- Vol. 13 (5) , 1994-1998
Charging effects in plasma immersion ion implantation for microelectronics
The charging effects of plasma immersion ion implantation (PIII) doping experiments have been investigated using a dynamic sheath model and PDP1 plasma simulation code. When the target has a dielectric film, charge accumulation during PIII can have a profound impact on doping results. Under certain process conditions, it can significantly reduce implant energy and dose and thereby alter the implant profile. In addition, it may degrade device reliability, especially for ultralarge-scale integrated circuit devices. In order to minimize charging effects, shorter pulse widths along with moderate values of plasma density and pulse potential should be used.