Adam Michael Law
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adam Michael Law has a total of 42 co-authors. Here are the top co-authors by number of shared publications:
John M. Walls
5 shared publications- John Michael Walls
Loughborough University
4 shared publications - Luke O. Jones
Centre for Renewable Energy Systems Technologies, CREST, Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, LE11 3TU, UK
4 shared publications Farwah Bukhari
Centre for Renewable Energy Systems Technology, Wolfson School of Mechanical, Electrical, and Manufacturing Engineering, Loughborough University, Loughborough, U.K.
2 shared publications- Luis C. Infante-Ortega
Centre for Renewable Energy Systems Technology (CREST), Wolfson School of Mechanical, Electrical and Manufacturing Engineering, Loughborough University, Loughborough, U.K.
2 shared publications - Luksa Kujovic
Centre for Renewable Energy Systems Technology (CREST) Wolfson School of Mechanical Electrical and Manufacturing Engineering Loughborough University Loughborough LE11 3TU UK
2 shared publications
Latest Publications
- Open Access
- 2 October 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 309
A multifunctional anti-reflection coating on coverglass for III-V solar cells for space applications
- 2 October 2026
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 309
Open AccessA multifunctional anti-reflection coating on coverglass for III-V solar cells for space applications
- Open Access
- 31 October 2025
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 4 (12) , 1486-1499
Designing hydrophobic, anti-soiling coatings for solar module cover glass: degradation mechanisms to avoid
In this paper, we identify the degradation mechanisms occurring with these coatings, in this way, we can identify more suitable coatings whose chemistry avoids these degradation pathways. Two such coating technologies used in other applications are perfluoropolyether (PFPE) and 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS-17). These polymeric hydrophobic coatings were deposited on soda–lime glass substrates and tested for 1000 hours in an accelerated UV exposure test and a damp heat test in a laboratory environment. After 1000 hours of UV exposure, the coatings experienced degradation with the PFPE coating degrading via β scission of the central ether bond whilst the FAS-17 underwent photo-oxidation at the C–Si bond. During damp heat testing the PFPE degraded by hydrolysis at the central ether bond whilst FAS-17 exhibited resistance to hydrolysis. The chemical mechanisms responsible for the degradation are identified. The objective is to discover alternative transparent hydrophobic materials that do not contain the same weaknesses in their chemical structure.
- 31 October 2025
- Published by Royal Society of Chemistry (RSC) in Energy Advances
- Vol. 4 (12) , 1486-1499
Open AccessDesigning hydrophobic, anti-soiling coatings for solar module cover glass: degradation mechanisms to avoid
In this paper, we identify the degradation mechanisms occurring with these coatings, in this way, we can identify more suitable coatings whose chemistry avoids these degradation pathways. Two such coating technologies used in other applications are perfluoropolyether (PFPE) and 1H,1H,2H,2H-perfluorodecyltriethoxysilane (FAS-17). These polymeric hydrophobic coatings were deposited on soda–lime glass substrates and tested for 1000 hours in an accelerated UV exposure test and a damp heat test in a laboratory environment. After 1000 hours of UV exposure, the coatings experienced degradation with the PFPE coating degrading via β scission of the central ether bond whilst the FAS-17 underwent photo-oxidation at the C–Si bond. During damp heat testing the PFPE degraded by hydrolysis at the central ether bond whilst FAS-17 exhibited resistance to hydrolysis. The chemical mechanisms responsible for the degradation are identified. The objective is to discover alternative transparent hydrophobic materials that do not contain the same weaknesses in their chemical structure.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 305-310
A Broadband Multilayer Antireflection Coating for Thin Film CdSeTe/CdTe Solar Cells
Thin film cadmium telluride (CdTe) photovoltaics (PV) is the most successful second-generation PV technology, with a current installed capacity of over 30 GWp, predominantly at utility scale. Recent improvements in the buffer layer of the device, switching from cadmium sulphide (CdS) to transparent magnesium-doped zinc oxide (MZO), tin oxide (SnO $_{2}$ ), or zinc oxide (ZnO), and the addition of selenium to the absorber layer, have expanded the wavelength range over which CdTe devices operate, from 400–850 nm to 350–900 nm. These changes have resulted in higher efficiency devices. As a result, an optimized antireflection (AR) coating design is required to improve the efficiency further. A six-layer AR coating of SiO $_{2}$ and ZrO $_{2}$ , building on a previous four-layer design for CdTe devices, has been designed, modeled, and fabricated on 3.8-mm thick fluorine-doped tin oxide coated TEC™15 substrates, reducing reflection by 3.38% absolute. Electrical measurements of a CdSeTe/CdTe device before and after addition of the AR coating show an increase in short-circuit current density (J $_{sc}$ ) of almost 1 mAcm $^{-2}$ , a relative increase of 3.45%, and a 0.6% increase in the conversion efficiency of the device, from 16.93% to 17.53%, which is a relative increase of 3.54%. Unlike conventional single layer AR coatings this multilayer coating is stable even under the high processing temperatures required in module manufacturing, so could be supplied by glass manufacturers. This newly optimized broadband AR coating on will enable significantly higher conversion efficiencies and help push CdSeTe/CdTe module efficiencies higher.
- 25 December 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 305-310
A Broadband Multilayer Antireflection Coating for Thin Film CdSeTe/CdTe Solar Cells
Thin film cadmium telluride (CdTe) photovoltaics (PV) is the most successful second-generation PV technology, with a current installed capacity of over 30 GWp, predominantly at utility scale. Recent improvements in the buffer layer of the device, switching from cadmium sulphide (CdS) to transparent magnesium-doped zinc oxide (MZO), tin oxide (SnO $_{2}$ ), or zinc oxide (ZnO), and the addition of selenium to the absorber layer, have expanded the wavelength range over which CdTe devices operate, from 400–850 nm to 350–900 nm. These changes have resulted in higher efficiency devices. As a result, an optimized antireflection (AR) coating design is required to improve the efficiency further. A six-layer AR coating of SiO $_{2}$ and ZrO $_{2}$ , building on a previous four-layer design for CdTe devices, has been designed, modeled, and fabricated on 3.8-mm thick fluorine-doped tin oxide coated TEC™15 substrates, reducing reflection by 3.38% absolute. Electrical measurements of a CdSeTe/CdTe device before and after addition of the AR coating show an increase in short-circuit current density (J $_{sc}$ ) of almost 1 mAcm $^{-2}$ , a relative increase of 3.45%, and a 0.6% increase in the conversion efficiency of the device, from 16.93% to 17.53%, which is a relative increase of 3.54%. Unlike conventional single layer AR coatings this multilayer coating is stable even under the high processing temperatures required in module manufacturing, so could be supplied by glass manufacturers. This newly optimized broadband AR coating on will enable significantly higher conversion efficiencies and help push CdSeTe/CdTe module efficiencies higher.
- Top Cited PapersOpen Access
- 23 June 2023
- Published by Elsevier in Solar Energy
- Vol. 261, 85-95
The performance and durability of Anti-reflection coatings for solar module cover glass – a review
- 23 June 2023
- Published by Elsevier in Solar Energy
- Vol. 261, 85-95
Top Cited PapersOpen AccessThe performance and durability of Anti-reflection coatings for solar module cover glass – a review
- 27 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (3) , 349-354
ETFE and its Role in the Fabrication of Lightweight c-Si Solar Modules
Glass-free, lightweight, photovoltaic modules have the potential to enable new uses of solar in building integrated and vehicle integrated applications. Glass-free modules have the advantages of reduced weight, lower-cost mounting solutions, and reduced transportation costs. Ethylene tetrafluoroethylene (ETFE) is usually considered a suitable candidate to replace glass as the front cover sheet material in module fabrication. In this article, we report on its optical, chemical, self-cleaning, and morphological properties. Durability is a key issue, especially for building-integrated applications since harsh conditions are prevalent outdoors. We report on the effect of sequences of environmental stress tests (UV exposure, and Damp Heat). The module cover material is also subject to regular cleaning, which can cause surface damage. We report on the use of linear abrasion testing to assess the abrasion resistance of ETFE to a variety of abrasive materials. The results provide useful data on the advantages and disadvantages of replacing glass with a durable polymer for front sheets in solar modules.
- 27 February 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 13 (3) , 349-354
ETFE and its Role in the Fabrication of Lightweight c-Si Solar Modules
Glass-free, lightweight, photovoltaic modules have the potential to enable new uses of solar in building integrated and vehicle integrated applications. Glass-free modules have the advantages of reduced weight, lower-cost mounting solutions, and reduced transportation costs. Ethylene tetrafluoroethylene (ETFE) is usually considered a suitable candidate to replace glass as the front cover sheet material in module fabrication. In this article, we report on its optical, chemical, self-cleaning, and morphological properties. Durability is a key issue, especially for building-integrated applications since harsh conditions are prevalent outdoors. We report on the effect of sequences of environmental stress tests (UV exposure, and Damp Heat). The module cover material is also subject to regular cleaning, which can cause surface damage. We report on the use of linear abrasion testing to assess the abrasion resistance of ETFE to a variety of abrasive materials. The results provide useful data on the advantages and disadvantages of replacing glass with a durable polymer for front sheets in solar modules.
- 27 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 12 (5) , 1205-1210
Multilayer Antireflection Coatings for Cover Glass on Silicon Solar Modules
The cover glass on solar modules provides protection for the underlying solar cells but also leads to two forms of power loss: reflection losses and soiling losses. In this work, we report on the design of a broadband multilayer antireflection (MAR) coating designed for use with silicon modules and its advantages over commercial porous SiO $_{2}$ sol-gel coatings. The six-layer antireflection coating comprising SiO $_{2}$ and ZrO $_{2}$ has then been deposited on glass using high-rate pulsed dc magnetron sputtering. The reflection losses are reduced by 2.4% absolute compared with uncoated glass, whereas commercial SiO $_{2}$ coatings reduce reflection by 2.2%. The increased light reaching the solar cell improves the short-circuit current density ( J $_{{{sc}}}$ ) and spectral response, which increases the conversion efficiency from 17.1% to 17.5%, a relative increase of 2.34%. The coating is environmentally robust and abrasion resistant, whereas porous SiO $_{2}$ AR coatings are susceptible to abrasion damage and water ingress. The sputtering process used to fabricate the MAR coating is used for high throughput applications by most major glass manufacturers. We also explore the addition of a thin hydrophobic layer of refractive index n = 1.35 to the outer surface of the MAR coating. Addition of the hydrophobic layer increases the water contact angle of the MAR coating from 7 $^{\circ }$ to 114 $^{\circ }$ , with a significant increase in antisoiling properties without compromising AR performance. MAR coatings offer improved light transmission and improved durability over commercial porous SiO $_{2}$ sol-gel AR coatings.
- 27 July 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 12 (5) , 1205-1210
Multilayer Antireflection Coatings for Cover Glass on Silicon Solar Modules
The cover glass on solar modules provides protection for the underlying solar cells but also leads to two forms of power loss: reflection losses and soiling losses. In this work, we report on the design of a broadband multilayer antireflection (MAR) coating designed for use with silicon modules and its advantages over commercial porous SiO $_{2}$ sol-gel coatings. The six-layer antireflection coating comprising SiO $_{2}$ and ZrO $_{2}$ has then been deposited on glass using high-rate pulsed dc magnetron sputtering. The reflection losses are reduced by 2.4% absolute compared with uncoated glass, whereas commercial SiO $_{2}$ coatings reduce reflection by 2.2%. The increased light reaching the solar cell improves the short-circuit current density ( J $_{{{sc}}}$ ) and spectral response, which increases the conversion efficiency from 17.1% to 17.5%, a relative increase of 2.34%. The coating is environmentally robust and abrasion resistant, whereas porous SiO $_{2}$ AR coatings are susceptible to abrasion damage and water ingress. The sputtering process used to fabricate the MAR coating is used for high throughput applications by most major glass manufacturers. We also explore the addition of a thin hydrophobic layer of refractive index n = 1.35 to the outer surface of the MAR coating. Addition of the hydrophobic layer increases the water contact angle of the MAR coating from 7 $^{\circ }$ to 114 $^{\circ }$ , with a significant increase in antisoiling properties without compromising AR performance. MAR coatings offer improved light transmission and improved durability over commercial porous SiO $_{2}$ sol-gel AR coatings.
- Open Access
- 31 March 2022
- Published by Journal of Energy Systems in Journal of Energy Systems
- Vol. 6 (1) , 33-45
Performance and durability of thin film solar cells via testing the abrasion resistance of broadband anti-reflection coatings
Reflection from the front glass of solar modules causes over 4% optical loss leading to a significant decrease in module efficiency. Single layer solution gelation (sol-gel) anti-reflective (AR) coatings are effective over a narrow range of wavelengths, whereas reflection losses can be reduced over a broader wavelength when multilayer broadband AR coatings are applied. In this work, three different multilayer AR coatings including 4-layer SiO2/ZrO2, 4-layer SiO2/ITO, and 6-layer SiO2/ZrO2 were deposited using magnetron sputtering. The abrasion resistance is important because the coatings will be subject to regular cleaning cycles. A variety of abraders including Felt pad, CS-10 and CS-8 under different loads are used. The optical performance and durability of these coatings were analyzed using a spectrophotometer, optical microscope, scanning electron microscope, and scanning white light interferometer. No damage was observed after abrasion of the coatings with a felt pad under 1 and 2 N loads. However, there was a slight increase in Weighted Average Reflection. When coatings were tested with CS-10 and CS-8 abraders, coatings with ZrO2 resulted in higher scratch resistance in comparison to coating with ITO. However, all-dielectric broadband AR coatings are more durable and have better optical performance compared to single layer sol-gel coatings.
- 31 March 2022
- Published by Journal of Energy Systems in Journal of Energy Systems
- Vol. 6 (1) , 33-45
Open AccessPerformance and durability of thin film solar cells via testing the abrasion resistance of broadband anti-reflection coatings
Reflection from the front glass of solar modules causes over 4% optical loss leading to a significant decrease in module efficiency. Single layer solution gelation (sol-gel) anti-reflective (AR) coatings are effective over a narrow range of wavelengths, whereas reflection losses can be reduced over a broader wavelength when multilayer broadband AR coatings are applied. In this work, three different multilayer AR coatings including 4-layer SiO2/ZrO2, 4-layer SiO2/ITO, and 6-layer SiO2/ZrO2 were deposited using magnetron sputtering. The abrasion resistance is important because the coatings will be subject to regular cleaning cycles. A variety of abraders including Felt pad, CS-10 and CS-8 under different loads are used. The optical performance and durability of these coatings were analyzed using a spectrophotometer, optical microscope, scanning electron microscope, and scanning white light interferometer. No damage was observed after abrasion of the coatings with a felt pad under 1 and 2 N loads. However, there was a slight increase in Weighted Average Reflection. When coatings were tested with CS-10 and CS-8 abraders, coatings with ZrO2 resulted in higher scratch resistance in comparison to coating with ITO. However, all-dielectric broadband AR coatings are more durable and have better optical performance compared to single layer sol-gel coatings.
- Open Access
- 20 January 2022
- Published by Wiley in Energy Science & Engineering
- Vol. 10 (3) , 892-902
Next steps in the footprint project: A feasibility study of installing solar panels on Bath Abbey
- 20 January 2022
- Published by Wiley in Energy Science & Engineering
- Vol. 10 (3) , 892-902
Open AccessNext steps in the footprint project: A feasibility study of installing solar panels on Bath Abbey
- 1 January 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 219
Artificial linear brush abrasion of coatings for photovoltaic module first-surfaces
- 1 January 2021
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 219
Artificial linear brush abrasion of coatings for photovoltaic module first-surfaces