Bruno Lepetit
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bruno Lepetit has a total of 25 co-authors. Here are the top co-authors by number of shared publications:
- Bret Jackson
Department of Chemistry, University of Massachusetts, Amherst, Massachusetts 01003, USA
3 shared publications Aron Kuppermann
Division of Chemistry and Chemical Engineering, California Institute of Technology, Pasadena, California 91125, USA
2 shared publications- Didier Lemoine
Laboratoire Collisions Agrégats Réactivité (LCAR/FeRMI), Université Toulouse III - Paul Sabatier and CNRS, Toulouse, France
2 shared publications - František Karlický
Department of Physics, Faculty of Science, University of Ostrava, Ostrava, Czech Republic
2 shared publications - Maykel Márquez-Mijares
Instituto Superior de Tecnologías y Ciencias Aplicadas, University of Havana (InSTEC-UH), Havana, Cuba
2 shared publications A. Dupays
Laboratoire Collisions, Agrégats, Réactivité (UMR 5589 CNRS-UPS), IRSAMC, Université Paul Sabatier Toulouse 3
1 shared publication
Latest Publications
- 6 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115404
Nanofibre-based trap for Rb2 molecule
We describe a theoretical proposal of a nanofibre-based trap for a Rb2 molecule prepared in the metastable state ( 1 ) 3 Σ u + . The trapping potential results from the combination of a travelling and a standing-wave fields, both carried by the fundamental guided mode HE11 of the fibre. We show that, with an experimentally realistic choice of laser frequencies and powers, one can implement a ≈200μK-deep well at ≈140 nm from the fibre surface accomodating for ≈500 translational molecular states.
- 6 October 2023
- Published by IOP Publishing in Physica Scripta
- Vol. 98 (11) , 115404
Nanofibre-based trap for Rb2 molecule
We describe a theoretical proposal of a nanofibre-based trap for a Rb2 molecule prepared in the metastable state ( 1 ) 3 Σ u + . The trapping potential results from the combination of a travelling and a standing-wave fields, both carried by the fundamental guided mode HE11 of the fibre. We show that, with an experimentally realistic choice of laser frequencies and powers, one can implement a ≈200μK-deep well at ≈140 nm from the fibre surface accomodating for ≈500 translational molecular states.
- 5 April 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (13) , 135104
A quantum mechanical model of field emission from a graphene blade type material
We present a simple quantum perturbative full dimensionality model to study field emission from a graphene blade within the frame of the Bardeen transfer Hamiltonian formalism. The material electronic wavefunction is obtained for a multidimensional square well potential specifically designed to reproduce two important characteristics of the material, the Fermi level, and the shape of the emitting orbitals. The wavefunction in the vacuum between the electrodes is obtained with a close coupling method in a finite domain. Our model provides the emitted current density with respect to the applied field. This allows us to discriminate the different functional forms proposed to fit the Fowler–Nordheim emission curves. Our model also provides information on emission patterns. Electron total energy distributions are computed for different field intensities and compared with other theoretical and experimental results.
- 5 April 2023
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 133 (13) , 135104
A quantum mechanical model of field emission from a graphene blade type material
We present a simple quantum perturbative full dimensionality model to study field emission from a graphene blade within the frame of the Bardeen transfer Hamiltonian formalism. The material electronic wavefunction is obtained for a multidimensional square well potential specifically designed to reproduce two important characteristics of the material, the Fermi level, and the shape of the emitting orbitals. The wavefunction in the vacuum between the electrodes is obtained with a close coupling method in a finite domain. Our model provides the emitted current density with respect to the applied field. This allows us to discriminate the different functional forms proposed to fit the Fowler–Nordheim emission curves. Our model also provides information on emission patterns. Electron total energy distributions are computed for different field intensities and compared with other theoretical and experimental results.
- 12 April 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (14) , 144302
A quantum mechanical model of electron field emission from two dimensional materials. Application to graphene
We implement a new time-independent perturbative quantum method to study quantitatively electron field emission from two dimensional materials and, in particular, from graphene. The Bardeen transfer Hamiltonian formalism is coupled to a detailed description of the electronic structure of the material. This calculation method is first validated on the standard Fowler–Nordheim (FN) model of a three-dimensional (3D) free-electron gas. Then, it is used to study emission from a two-dimensional (2D) free-electron gas and from graphene represented by a tight-binding model. In the case of graphene, we show that a full electronic band model of the material is necessary to obtain reasonable results because emission is not restricted to the vicinity of the Fermi level near the Dirac points. The graphene emitted current density follows a modified FN law with respect to the applied field, with a prefactor exponent for the field intermediate between the one for the cases of 2D ( ) and 3D ( ) free-electron gases. However, the emitted current level is low because the kinetic energy of the electrons corresponds to a motion parallel to the emitting surface, which is not efficient in promoting emission. Our study gives a firm ground to the idea that emission from graphene results almost exclusively from defects.- 12 April 2021
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 129 (14) , 144302
A quantum mechanical model of electron field emission from two dimensional materials. Application to graphene
We implement a new time-independent perturbative quantum method to study quantitatively electron field emission from two dimensional materials and, in particular, from graphene. The Bardeen transfer Hamiltonian formalism is coupled to a detailed description of the electronic structure of the material. This calculation method is first validated on the standard Fowler–Nordheim (FN) model of a three-dimensional (3D) free-electron gas. Then, it is used to study emission from a two-dimensional (2D) free-electron gas and from graphene represented by a tight-binding model. In the case of graphene, we show that a full electronic band model of the material is necessary to obtain reasonable results because emission is not restricted to the vicinity of the Fermi level near the Dirac points. The graphene emitted current density follows a modified FN law with respect to the applied field, with a prefactor exponent for the field intermediate between the one for the cases of 2D ( ) and 3D ( ) free-electron gases. However, the emitted current level is low because the kinetic energy of the electrons corresponds to a motion parallel to the emitting surface, which is not efficient in promoting emission. Our study gives a firm ground to the idea that emission from graphene results almost exclusively from defects.- 9 September 2020
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 153 (10) , 104302
Computation and analysis of bound vibrational spectra of the neon tetramer using row orthonormal hyperspherical coordinates
This paper presents the first implementation of the row-orthonormal hyperspherical coordinate formalism for the computation of the vibrational spectrum of a tetratomic system. The wavefunction of Ne4 is expanded on a large basis set of hyperspherical harmonics generated numerically. This method not only provides spectra with reasonable accuracy, but also gives physical insight into the vibrational dynamics of the system. The characteristics of the spectra are related to the symmetry and localization of the wavefunction in configuration space.
- 9 September 2020
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 153 (10) , 104302
Computation and analysis of bound vibrational spectra of the neon tetramer using row orthonormal hyperspherical coordinates
This paper presents the first implementation of the row-orthonormal hyperspherical coordinate formalism for the computation of the vibrational spectrum of a tetratomic system. The wavefunction of Ne4 is expanded on a large basis set of hyperspherical harmonics generated numerically. This method not only provides spectra with reasonable accuracy, but also gives physical insight into the vibrational dynamics of the system. The characteristics of the spectra are related to the symmetry and localization of the wavefunction in configuration space.
- Open Access
- 10 January 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (2) , 025107
A three dimensional numerical quantum mechanical model of electronic field emission from metallic surfaces with nanoscale corrugation
The effects on the electronic emission of the presence of nanoscale steps on a tungsten surface are investigated for the first time using three dimensional quantum mechanical models. The plane wave periodic version of the density functional theory is used to obtain the electronic wavefunctions and potentials for flat and corrugated structures. Local and averaged emitted current densities are obtained from them using time dependent perturbation theory. The orders of magnitude of the averaged current densities resulting from these calculations are similar for both flat and corrugated cases; however, strong enhancements are observed on the local current densities near the edges of the steps. These numerical results are compared with those of the analytical Fowler-Nordheim type models. The slopes of the Fowler-Nordheim plots are in good agreement for both numerical and analytical models, but the magnitudes of the emitted currents are significantly different. This is related to weaknesses in the description of the electronic structure of the metal in the analytical models.
- 10 January 2019
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 125 (2) , 025107
Open AccessA three dimensional numerical quantum mechanical model of electronic field emission from metallic surfaces with nanoscale corrugation
The effects on the electronic emission of the presence of nanoscale steps on a tungsten surface are investigated for the first time using three dimensional quantum mechanical models. The plane wave periodic version of the density functional theory is used to obtain the electronic wavefunctions and potentials for flat and corrugated structures. Local and averaged emitted current densities are obtained from them using time dependent perturbation theory. The orders of magnitude of the averaged current densities resulting from these calculations are similar for both flat and corrugated cases; however, strong enhancements are observed on the local current densities near the edges of the steps. These numerical results are compared with those of the analytical Fowler-Nordheim type models. The slopes of the Fowler-Nordheim plots are in good agreement for both numerical and analytical models, but the magnitudes of the emitted currents are significantly different. This is related to weaknesses in the description of the electronic structure of the metal in the analytical models.
- 5 December 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (21)
Electronic field emission models beyond the Fowler-Nordheim one
We propose several quantum mechanical models to describe electronic field emission from first principles. These models allow us to correlate quantitatively the electronic emission current with the electrode surface details at the atomic scale. They all rely on electronic potential energy surfaces obtained from three dimensional density functional theory calculations. They differ by the various quantum mechanical methods (exact or perturbative, time dependent or time independent), which are used to describe tunneling through the electronic potential energy barrier. Comparison of these models between them and with the standard Fowler-Nordheim one in the context of one dimensional tunneling allows us to assess the impact on the accuracy of the computed current of the approximations made in each model. Among these methods, the time dependent perturbative one provides a well-balanced trade-off between accuracy and computational cost.
- 5 December 2017
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 122 (21)
Electronic field emission models beyond the Fowler-Nordheim one
We propose several quantum mechanical models to describe electronic field emission from first principles. These models allow us to correlate quantitatively the electronic emission current with the electrode surface details at the atomic scale. They all rely on electronic potential energy surfaces obtained from three dimensional density functional theory calculations. They differ by the various quantum mechanical methods (exact or perturbative, time dependent or time independent), which are used to describe tunneling through the electronic potential energy barrier. Comparison of these models between them and with the standard Fowler-Nordheim one in the context of one dimensional tunneling allows us to assess the impact on the accuracy of the computed current of the approximations made in each model. Among these methods, the time dependent perturbative one provides a well-balanced trade-off between accuracy and computational cost.
- 1 November 2016
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 34 (6) , 061208
Influence of ambient gas pressure and carbon adsorption on dark current emission from a cathode
Electronic field emission current (dark current) from surfaces under vacuum at high field strengths can be reduced by the injection of gas into the ambient volume. A possible reversible mechanism responsible for this gas effect is proposed. The mechanism involves the formation of nanoscale emitter structures by polymerization of hydrocarbon contamination with low-flux ion bombardment at low pressure, and the destruction of these structures by high flux ion bombardment at sufficiently high pressure. Experimental evidence, in particular, x-ray photoelectron spectroscopy analysis of the electrode, is provided in support of this mechanism. Density functional theory calculations are presented to show that the morphology of the carbon layer, not its chemical composition, is the important parameter influencing dark current levels.
- 1 November 2016
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 34 (6) , 061208
Influence of ambient gas pressure and carbon adsorption on dark current emission from a cathode
Electronic field emission current (dark current) from surfaces under vacuum at high field strengths can be reduced by the injection of gas into the ambient volume. A possible reversible mechanism responsible for this gas effect is proposed. The mechanism involves the formation of nanoscale emitter structures by polymerization of hydrocarbon contamination with low-flux ion bombardment at low pressure, and the destruction of these structures by high flux ion bombardment at sufficiently high pressure. Experimental evidence, in particular, x-ray photoelectron spectroscopy analysis of the electrode, is provided in support of this mechanism. Density functional theory calculations are presented to show that the morphology of the carbon layer, not its chemical composition, is the important parameter influencing dark current levels.
- Open Access
- 4 August 2014
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 113 (6) , 069602
Lepetit and Jackson Reply:
A Reply to the Comment by B. Lepetit and B. Jackson.
- 4 August 2014
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 113 (6) , 069602
Open AccessLepetit and Jackson Reply:
A Reply to the Comment by B. Lepetit and B. Jackson.
- Open Access
- 30 November 2011
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 107 (23) , 236102
Sticking of Hydrogen on Supported and Suspended Graphene at Low Temperature
The physisorption of atomic hydrogen on graphene is investigated quantum mechanically using a semiempirical model for the lattice dynamics. A thermally averaged wave packet propagation describes the motion of the H atoms with respect to the membrane. Two graphene configurations, either supported on a silicone oxide substrate or suspended over a hole in the substrate, are considered. In both cases, the phonon spectrum is modified in such a way that graphene is stabilized with respect to thermal fluctuations. The sticking probabilities of hydrogen on these stabilized membranes at 10 K are high at low collision energies, and larger than on graphite.
- 30 November 2011
- Published by American Physical Society (APS) in Physical Review Letters
- Vol. 107 (23) , 236102
Open AccessSticking of Hydrogen on Supported and Suspended Graphene at Low Temperature
The physisorption of atomic hydrogen on graphene is investigated quantum mechanically using a semiempirical model for the lattice dynamics. A thermally averaged wave packet propagation describes the motion of the H atoms with respect to the membrane. Two graphene configurations, either supported on a silicone oxide substrate or suspended over a hole in the substrate, are considered. In both cases, the phonon spectrum is modified in such a way that graphene is stabilized with respect to thermal fluctuations. The sticking probabilities of hydrogen on these stabilized membranes at 10 K are high at low collision energies, and larger than on graphite.
- 18 March 2011
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 134 (11) , 114705
Sticking and desorption of hydrogen on graphite: A comparative study of different models
We study the physisorption of atomic hydrogen on graphitic surfaces with four different quantum mechanical methods: perturbation and effective Hamiltonian theories, close coupling wavepacket, and reduced density matrix propagation methods. Corrugation is included in the modeling of the surface. Sticking is a fast process which is well described by all methods. Sticking probabilities are of the order of a few percent in the collision energy range 0–25 meV, but are enhanced for collision energies close to those of diffraction resonances. Sticking also increases with surface temperature. Desorption is a slow process which involves multiphonon processes. We show, however, how to correct the close coupling wavepacket method to account for such phenomena and obtain correct time constants for initial state decay. Desorption time constants are in the range of 20–50 ps for a surface temperature of 300 K.
- 18 March 2011
- Published by AIP Publishing in The Journal of Chemical Physics
- Vol. 134 (11) , 114705
Sticking and desorption of hydrogen on graphite: A comparative study of different models
We study the physisorption of atomic hydrogen on graphitic surfaces with four different quantum mechanical methods: perturbation and effective Hamiltonian theories, close coupling wavepacket, and reduced density matrix propagation methods. Corrugation is included in the modeling of the surface. Sticking is a fast process which is well described by all methods. Sticking probabilities are of the order of a few percent in the collision energy range 0–25 meV, but are enhanced for collision energies close to those of diffraction resonances. Sticking also increases with surface temperature. Desorption is a slow process which involves multiphonon processes. We show, however, how to correct the close coupling wavepacket method to account for such phenomena and obtain correct time constants for initial state decay. Desorption time constants are in the range of 20–50 ps for a surface temperature of 300 K.