Zhifeng Zhang
Research Subjects
Zhifeng Zhang has a total of 30 co-authors. Here are the top co-authors by number of shared publications:
- Guanjie Liu
Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China
1 shared publication Guomin Zhang
Institute of Electrical Engineering, Chinese Academy of Sciences
1 shared publication- Guomin Zhang
Institute of Electrical Engineering, Chinese Academy of Sciences, Beijing, China
1 shared publication - Haonan Wang
State Key Laboratory of Material Processing and Die & Mold Technology, School of Materials Science and Engineering, Huazhong University of Science and Technology, Wuhan 430074, China
1 shared publication - Huijuan Gao
Key Laboratory of Applied Superconductivity and the Institute of Electrical Engineering, Chinese Academy of Science, Beijing, China
1 shared publication Janet David
Department of Engineering Science, University of Oxford, Oxford OX1 3PJ
1 shared publication
Latest Publications
- Open Access
- 7 January 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (2) , 377
On-Orbit Relative Radiometric Calibration of the Bayer Pattern Push-Broom Sensor for Zhuhai-1 Video Satellites
The two video satellites of the second and third batch of Zhuhai-1 microsatellites (referred to as OVS-2A/3A) are operational with their hyperspectral satellites, which improves the data acquisi-tion capability of the Zhuhai-1 remote sensing satellite constellation. Contrary to the linear array push-broom hyperspectral satellites and plane array CCD video satellites, the OVS satellite is equipped with a planar array Bayer pattern sensor, which can obtain single-band grayscale images by push-broom imaging. Additionally, the Bayer color reconstruction algorithm can interpolate sensor data to provide RGB color band information. Therefore, for the Bayer pattern push-broom sensor, the relative calibration method of linear push-broom or array cameras cannot be directly applied. The radiometric calibration of the Bayer pattern push-broom imaging mode has become a matter of concern; therefore, this study developed a radiometric calibration method for the Bayer pattern push-broom sensor of the OVS satellite and verified its effectiveness and accuracy. OVS images were used to perform on-orbit relative radiometric calibration, and the calibration accu-racy, including streaking metrics and root-mean-square error, was better than 1%, meeting the specification requirements for the OVS satellite. Visually, after calibration correction, the streaking and striping noise of the Bayer images was removed, and the radiometric quality of the image was considerably improved, providing a good data basis for subsequent research in remote sensing applications.
- 7 January 2023
- Published by MDPI AG in Remote Sensing
- Vol. 15 (2) , 377
Open AccessOn-Orbit Relative Radiometric Calibration of the Bayer Pattern Push-Broom Sensor for Zhuhai-1 Video Satellites
The two video satellites of the second and third batch of Zhuhai-1 microsatellites (referred to as OVS-2A/3A) are operational with their hyperspectral satellites, which improves the data acquisi-tion capability of the Zhuhai-1 remote sensing satellite constellation. Contrary to the linear array push-broom hyperspectral satellites and plane array CCD video satellites, the OVS satellite is equipped with a planar array Bayer pattern sensor, which can obtain single-band grayscale images by push-broom imaging. Additionally, the Bayer color reconstruction algorithm can interpolate sensor data to provide RGB color band information. Therefore, for the Bayer pattern push-broom sensor, the relative calibration method of linear push-broom or array cameras cannot be directly applied. The radiometric calibration of the Bayer pattern push-broom imaging mode has become a matter of concern; therefore, this study developed a radiometric calibration method for the Bayer pattern push-broom sensor of the OVS satellite and verified its effectiveness and accuracy. OVS images were used to perform on-orbit relative radiometric calibration, and the calibration accu-racy, including streaking metrics and root-mean-square error, was better than 1%, meeting the specification requirements for the OVS satellite. Visually, after calibration correction, the streaking and striping noise of the Bayer images was removed, and the radiometric quality of the image was considerably improved, providing a good data basis for subsequent research in remote sensing applications.
- Open Access
- 13 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 141589-141598
An Appraisal of Manufacturing Structures Using Timeliness-Quality Entropy and Order Index Methods
A system’s configuration plays a significant role in promoting its efficient functioning. This article addresses the problem of the deficiency of algorithms that can be employed to appraise the running performance of a system in diverse manufacturing structures. First, a timeliness-quality entropy concept is presented according to the mechanisms of information transmission. Based on the conditional entropy theory, a timeliness-quality entropy approach, jointed a structure order index developed, is then proposed to appraise the order degree of manufacturing structures quantitatively and screen manufacturing structure solutions appropriately. In an empirical study, we target the different facilities layout design of a job shop before and after conducting technological transformation and compute the order index under the different layout types. Eventually, the result obtained illustrates the applicability and effectiveness of the proposed approach. Therefore, this approach provides crucial theoretical support and practical guidance for appraising and screening manufacturing structures.
- 13 October 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 141589-141598
Open AccessAn Appraisal of Manufacturing Structures Using Timeliness-Quality Entropy and Order Index Methods
A system’s configuration plays a significant role in promoting its efficient functioning. This article addresses the problem of the deficiency of algorithms that can be employed to appraise the running performance of a system in diverse manufacturing structures. First, a timeliness-quality entropy concept is presented according to the mechanisms of information transmission. Based on the conditional entropy theory, a timeliness-quality entropy approach, jointed a structure order index developed, is then proposed to appraise the order degree of manufacturing structures quantitatively and screen manufacturing structure solutions appropriately. In an empirical study, we target the different facilities layout design of a job shop before and after conducting technological transformation and compute the order index under the different layout types. Eventually, the result obtained illustrates the applicability and effectiveness of the proposed approach. Therefore, this approach provides crucial theoretical support and practical guidance for appraising and screening manufacturing structures.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (1) , 1-5
Research on Delamination Damage of YBCO Tape Under DC Impact Based on Hilbert–Huang Transform
The short-circuit fault current on the DC side affects the operation safety of the multi-terminal flexible HVDC transmission system (MTDC) seriously. The resistance-type superconducting fault current limiter (RSFCL) has received extensive attention in limiting the DC impact current because it has fast response speed and zero impedance at steady state. YBCO tapes are susceptible to delamination damage under large DC impact and it will affect the operation of RSFCLs. However, the existing methods of distinguishing the delamination damage of YBCO tape need an extra observation or testing after DC impact. These methods cannot meet the requirements for monitoring and protection when RSFCLs coming into use in the power system. In this paper, the Hilbert-Huang Transform (HHT) is used to analyze the delamination damage of YBCO tapes under DC impact to avoid extra observation and testing. The DC impact test on the YBCO tape sample is carried out and the test data are obtained. HHT is applied on the Joule thermal power waves (TPWs) of the YBCO tape samples obtained from the DC impact test as the input signal. Hilbert spectrums and instantaneous energy spectrums (IEs) of the TPW signals are calculated and the difference between IEs of TPW signals of intact samples and delaminated samples is shown and explained. The feasibility of IEs of TPW signals as a monitoring target to avoid the stratification damage of YBCO tapes. The proposed method aids in the on-load monitoring on RSFCLs and provided a new tack for related research.
- 21 July 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 31 (1) , 1-5
Research on Delamination Damage of YBCO Tape Under DC Impact Based on Hilbert–Huang Transform
The short-circuit fault current on the DC side affects the operation safety of the multi-terminal flexible HVDC transmission system (MTDC) seriously. The resistance-type superconducting fault current limiter (RSFCL) has received extensive attention in limiting the DC impact current because it has fast response speed and zero impedance at steady state. YBCO tapes are susceptible to delamination damage under large DC impact and it will affect the operation of RSFCLs. However, the existing methods of distinguishing the delamination damage of YBCO tape need an extra observation or testing after DC impact. These methods cannot meet the requirements for monitoring and protection when RSFCLs coming into use in the power system. In this paper, the Hilbert-Huang Transform (HHT) is used to analyze the delamination damage of YBCO tapes under DC impact to avoid extra observation and testing. The DC impact test on the YBCO tape sample is carried out and the test data are obtained. HHT is applied on the Joule thermal power waves (TPWs) of the YBCO tape samples obtained from the DC impact test as the input signal. Hilbert spectrums and instantaneous energy spectrums (IEs) of the TPW signals are calculated and the difference between IEs of TPW signals of intact samples and delaminated samples is shown and explained. The feasibility of IEs of TPW signals as a monitoring target to avoid the stratification damage of YBCO tapes. The proposed method aids in the on-load monitoring on RSFCLs and provided a new tack for related research.
- 16 October 2017
- Published by Springer Nature in Journal of Materials Science
- Vol. 53 (4) , 2685-2696
Hierarchical 3D nitrogen and phosphorous codoped graphene/carbon nanotubes–sulfur composite with synergistic effect for high performance of lithium–sulfur batteries
- 16 October 2017
- Published by Springer Nature in Journal of Materials Science
- Vol. 53 (4) , 2685-2696
Hierarchical 3D nitrogen and phosphorous codoped graphene/carbon nanotubes–sulfur composite with synergistic effect for high performance of lithium–sulfur batteries
- 18 November 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 22 (3) , 5700804
Control and Test of a 0.5 MVA/1 MJ SMES
A 0.5 MVA/1 MJ superconducting magnetic energy storage system (SMES) has been installed in a superconducting power substation. The SMES is designed to compensate active power fluctuations, current harmonics and reactive power of the downstream load. The system configurations and control strategies are described. Experimental and field test results show that the proposed SMES can effectively improve the power quality of the power system.
- 18 November 2011
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 22 (3) , 5700804
Control and Test of a 0.5 MVA/1 MJ SMES
A 0.5 MVA/1 MJ superconducting magnetic energy storage system (SMES) has been installed in a superconducting power substation. The SMES is designed to compensate active power fluctuations, current harmonics and reactive power of the downstream load. The system configurations and control strategies are described. Experimental and field test results show that the proposed SMES can effectively improve the power quality of the power system.