Gabriel Tobie
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gabriel Tobie has a total of 440 co-authors. Here are the top co-authors by number of shared publications:
- Gaël Choblet
Nantes Université, Univ Angers, Le Mans Université, CNRS, Laboratoire de Planétologie et Géosciences, LPG UMR 6112, 44000 Nantes, France
12 shared publications - Marie Běhounková
Department of Geophysics, Faculty of Mathematics and Physics, Charles University, Praha, Czech Republic
12 shared publications - Benoît Seignovert
OSUNA, UAR-3281, LPG UMR-6112, CNRS, Nantes Universite, Nantes, France
10 shared publications Gaël Choblet
10 shared publications- Stéphane Le Mouélic
LPG, UMR-CNRS 6112, Nantes Université, 44322 Nantes Cedex, France
10 shared publications - Claire Vallat
European Space Agency, ESAC, Camino Bajo del Castillo, s/n, 28692 Villafranca del Castillo, Madrid, Spain
8 shared publications
Latest Publications
- Open Access
- 30 October 2026
- Published by Université Paris Cité in Planetary Research
- Vol. 1 (3) , 349
Super-resolution maps of icy moons: Application to the Cassini-VIMS observations of Enceladus with updated navigation and photometric correction
The icy moons of the outer solar system have been found in the forefront of planetary exploration, due to their diverse geomorphology coupled with numerous discoveries hinting to possible habitable conditions. Of paramount importance for constraining the internal structure and properties of these bodies are high-precision cartographic products, allowing for linking surface morphologies and composition to internal activity. These cartographic products are constructed by reconciling numerous different observations, which, due to the complexities of an orbital tour, are recorded under a great range of different illumination and observation conditions, with varying spatial sampling. The aim of this study is to provide a complete pipeline for producing Super-Resolution (SR) maps for icy moons, by combining all the overlapping observations for a specific target. The development and testing of our pipeline are carried out for Enceladus, using the hyperspectral cubes recorded by the Visual and Infrared Mapping Spectrometer (VIMS) instrument, on board the Cassini Saturn orbiter. We first navigate the data, calculating accurate projections that can be combined into global mosaics of Enceladus. We then implement a global photometric correction model that compensates for the different acquisition conditions. Finally, we combine all the overlapping observations to calculate the new SR maps of Enceladus in the infrared. The new SR global map of Enceladus provides new insight into the moon’s geomorphology as revealed from its surface spectral heterogeneity at finer spatial resolution, demonstrating the capability of SR to augment our current understanding of icy moons and help prepare for future observations.
- 30 October 2026
- Published by Université Paris Cité in Planetary Research
- Vol. 1 (3) , 349
Open AccessSuper-resolution maps of icy moons: Application to the Cassini-VIMS observations of Enceladus with updated navigation and photometric correction
The icy moons of the outer solar system have been found in the forefront of planetary exploration, due to their diverse geomorphology coupled with numerous discoveries hinting to possible habitable conditions. Of paramount importance for constraining the internal structure and properties of these bodies are high-precision cartographic products, allowing for linking surface morphologies and composition to internal activity. These cartographic products are constructed by reconciling numerous different observations, which, due to the complexities of an orbital tour, are recorded under a great range of different illumination and observation conditions, with varying spatial sampling. The aim of this study is to provide a complete pipeline for producing Super-Resolution (SR) maps for icy moons, by combining all the overlapping observations for a specific target. The development and testing of our pipeline are carried out for Enceladus, using the hyperspectral cubes recorded by the Visual and Infrared Mapping Spectrometer (VIMS) instrument, on board the Cassini Saturn orbiter. We first navigate the data, calculating accurate projections that can be combined into global mosaics of Enceladus. We then implement a global photometric correction model that compensates for the different acquisition conditions. Finally, we combine all the overlapping observations to calculate the new SR maps of Enceladus in the infrared. The new SR global map of Enceladus provides new insight into the moon’s geomorphology as revealed from its surface spectral heterogeneity at finer spatial resolution, demonstrating the capability of SR to augment our current understanding of icy moons and help prepare for future observations.
- Open Access
- 29 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Comment on egusphere-2026-2655
In August 2024, MAJIS, the visible and infrared mapping spectrometer onboard the ESA-Juice spacecraft, collected its first observations of resolved targets during Lunar and Earth Gravity Assist maneuver (LEGA). One month before, during payload checkout 2 (PC2), MAJIS performed two starfield observations to evaluate its post-launch geometric performances that can be compared with the LEGA data. This work presents an overview of the spatial distribution of the MAJIS signal collected at different scan angles and their position in MAJIS field of view. In PC2 starfields, 14 stars were identified, allowing us to derive a new in-flight alignment with an accuracy of 0.7 ± 0.4 MAJIS instantaneous field of view (IFOV). The offset between the nominal boresight of Juice remote sensing platform (+Z) and MAJIS boresight was evaluated to be 27 samples (along-slit) and 31 lines (cross-slit). With this new alignment, MAJIS observations on the Moon are co-aligned with JANUS camera with an accuracy of 2.2 ± 0.9 IFOV which could be improved to 1.1 ± 0.6 IFOV with bundle adjustment. A comparison of MAJIS Earth observations with simultaneous weather satellites observations confirmed that the MAJIS alignment is accurate for the full close Earth flyby. Residual misalignments with JANUS and NavCam remain visible in the Earth dataset but they can be easily corrected using small timing and scan angle adjustments (<10 IFOV). The instrument and frame kernels for MAJIS will be updated on the basis of these results. The improved co-alignment between MAJIS, JANUS and NavCam ensures strong synergy between the remote sensing instruments during the nominal scientific phase when they operate at the same time.
- 29 September 2026
- Published by Copernicus GmbH
- Vol. 2026, 1-39
Open AccessComment on egusphere-2026-2655
In August 2024, MAJIS, the visible and infrared mapping spectrometer onboard the ESA-Juice spacecraft, collected its first observations of resolved targets during Lunar and Earth Gravity Assist maneuver (LEGA). One month before, during payload checkout 2 (PC2), MAJIS performed two starfield observations to evaluate its post-launch geometric performances that can be compared with the LEGA data. This work presents an overview of the spatial distribution of the MAJIS signal collected at different scan angles and their position in MAJIS field of view. In PC2 starfields, 14 stars were identified, allowing us to derive a new in-flight alignment with an accuracy of 0.7 ± 0.4 MAJIS instantaneous field of view (IFOV). The offset between the nominal boresight of Juice remote sensing platform (+Z) and MAJIS boresight was evaluated to be 27 samples (along-slit) and 31 lines (cross-slit). With this new alignment, MAJIS observations on the Moon are co-aligned with JANUS camera with an accuracy of 2.2 ± 0.9 IFOV which could be improved to 1.1 ± 0.6 IFOV with bundle adjustment. A comparison of MAJIS Earth observations with simultaneous weather satellites observations confirmed that the MAJIS alignment is accurate for the full close Earth flyby. Residual misalignments with JANUS and NavCam remain visible in the Earth dataset but they can be easily corrected using small timing and scan angle adjustments (<10 IFOV). The instrument and frame kernels for MAJIS will be updated on the basis of these results. The improved co-alignment between MAJIS, JANUS and NavCam ensures strong synergy between the remote sensing instruments during the nominal scientific phase when they operate at the same time.
- Open Access
- 13 July 2026
- Published by Wiley
Cracking Europa: Formation of the dilational bands and material distribution on the surface
The surface of Europa is geologically very young and exhibits a unique collection of complex features, among which lineaments, ridges, and large bands extending over hundreds to thousands of kilometers, indicators of intense tectonic activity and various degrees of dilation. The Galileo mission revealed the presence of a significant fraction of salts, with a higher concentration along these tectonic features, suggesting an internal origin. In this work, we perform numerical simulations of dilational band formation, carry out a parametric study to uncover the conditions under which lateral tectonic extension could lead to their formation, and predict their morphology under various conditions. We identify that dilational bands form at high extensional strain rates and that the thickness and strength of the lithosphere govern the type of dilational band formed. We also explore how extension drives the transport of crustal non-ice material (CNIM), such as salts, from the ocean to the surface, explaining their presence and spatial distribution on Europa's surface. We find that the surface composition reflects the initial vertical profile of the ice shell, resulting in a wide range of eventual distributions of CNIM, and sometimes oceanic material, at the surface.
- 13 July 2026
- Published by Wiley
Open AccessCracking Europa: Formation of the dilational bands and material distribution on the surface
The surface of Europa is geologically very young and exhibits a unique collection of complex features, among which lineaments, ridges, and large bands extending over hundreds to thousands of kilometers, indicators of intense tectonic activity and various degrees of dilation. The Galileo mission revealed the presence of a significant fraction of salts, with a higher concentration along these tectonic features, suggesting an internal origin. In this work, we perform numerical simulations of dilational band formation, carry out a parametric study to uncover the conditions under which lateral tectonic extension could lead to their formation, and predict their morphology under various conditions. We identify that dilational bands form at high extensional strain rates and that the thickness and strength of the lithosphere govern the type of dilational band formed. We also explore how extension drives the transport of crustal non-ice material (CNIM), such as salts, from the ocean to the surface, explaining their presence and spatial distribution on Europa's surface. We find that the surface composition reflects the initial vertical profile of the ice shell, resulting in a wide range of eventual distributions of CNIM, and sometimes oceanic material, at the surface.
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Cracking Europa: Dilational bands formation and material transport in the ice shell
IntroductionWith its geologically young surface crosscut by linear structures such as ridges, lineae, and bands, Europa is a unique moon in our Solar System. It has been explored by multiple spacecraft, in particular the Galileo mission, which inferred the existence of a subsurface salty ocean, as well as the presence of surface salts, likely MgSO4 [1]. The Hubble Space Telescope also identified irradiated NaCl, which is consistent with the reddish color of Europa [2]. Their distribution across the surface coincides with geological structures, suggesting an internal origin and exchange of non-ice material (NIM) with its interior [1]. Europa undergoes periodic eccentricity variations over cycles of hundreds of million years [3], leading to global compression and extension [4,5]. As a result, the ice shell exhibits significant thickness variations, ranging from ~3-10 km to ~60-70 km [3,4,5].Unraveling the formation of dilational bands is a key to a better understanding of Europa's history. These wide bands, extending for hundreds of kilometers across its surface, are characterized by a complete opening of the surface with exposure of subsurface material in the fault zone. Their morphology suggests an extensional origin, and they likely form during the thickening of the ice shell [6,7]. Most of them spread from a V-shaped central trough, are roughly symmetrical, and often elevated with respect to surrounding terrains [6,7,8]. They exhibit a moderate topography of a few hundred meters [6,8,9] and are commonly classified into four main categories, depending on their brightness and texture [7]. Dark bands are the most common and are inferred to be richer in non-ice materials (NIM) and younger than bright bands [6,9]. Bright bands, on the contrary, are usually older, and often flanked by darker material [6,7,8]. Smooth bands have a hummocky texture with small-amplitude oscillations [7,8], while lineated bands consist of regularly spaced sub-parallel ridges and faults, spreading symmetrically from the central depression [6,7,8].We aim to unravel the conditions under which these bands are formed. We investigate the effect of various parameters, such as the ice shell thickness D, extension velocity Vext, ice cohesion Cice, and grain size, on band morphology and topography, using a two-dimensional Cartesian model of the ice shell undergoing a constant strain-rate tectonic extension. We also seek to investigate how tectonic extension drives transport of NIM and oceanic material to the surface, as well as their distribution.ResultsSeveral parameters significantly affect the formation of dilational bands, particularly Vext and D. We identify three main dynamical regimes, controlled by the efficiency of surface opening (Fig.1). Complete surface opening occurs only for sufficiently high strain rates, on the order of 10 km.Myr−1, and is further enhanced for thinner ice shells. The third regime is therefore the most consistent with dilational band formation (Fig.1).Efficient surface opening also promotes mass exchanges, with higher strain rates favoring the exposure of oceanic material at the surface. Thinner ice shells further enhance the exposure of oceanic material within the fault zone (Fig.2B). In these cases, NIM are pushed away from the fault zone. One important result is that the final lateral distribution across the band reflects the initial vertical distribution of material within the ice shell.Another key parameter is Cice, which controls the strength of the lithosphere. Fig.2 illustrates the effect of Cice on band formation for two different ice shell thicknesses. Tectonic extension commonly drives local convection within the ice shell, enhancing mass exchanges with the surface (Fig.2A). The strength of the lithosphere strongly affects band morphology, particularly the symmetry of the structure and the presence of a distinct central trough (Fig.2).ConclusionWe suggest that various types of bands were formed during distinct extensional events, explaining their brightness and texture differences. In particular, bright bands may form at an early stage of ice shell thickening when a thinner ice shell promotes the exposure of oceanic material within the fault zone. This provides a consistent explanation for their bright central region and often darker edges enriched in NIM. These darker edges may also result from a longer radiation exposure. In most cases, the farther from the center of the domain, the longer the material has remained at the surface, exposed to radiation (Fig.2C). In contrast, dark bands may form later, when the ice shell is thicker, limiting the exposure of oceanic material and resulting in a higher fraction of NIM within the fault zone. Finally, we are able to predict the morphology and composition of the dilational bands based on the rheological and physical properties of the ice shell at the time of extension. We show that we can also constrain the initial vertical profile in the ice shell from the vertical distribution of material across the band.Figure 1 - Effect of D and Vext on the final distribution of initial near-surface material and exposure of oceanic material.Figure 2 - Effect of Cice and D on: A. the viscosity field at the end of the extension, and B. the initial depth of the post-extension near-surface material. Grey part corresponds to what remains of the initial near-surface material. C. Comparative plots for two values of Cice: average time spent in the topmost cell by post-extension near-surface material, and fraction of NIM at the surface at the end of the extension. References[1] R. Carlson et al. (2009), In Europa, eds. R. T. Pappalardo et al., 283–327[2] S. K. Trumbo et al. (2019), Sci. Adv., 5, eaaw7123[3] H. Hussmann and T. Spohn (2004), Icarus, 171, 391-410[4] M. L. Rudolph et al. (2022), Geophys. Res. Lett., 49(5), e2021GL094421[5] M. Kihoulou et al. (2025), Sci. Adv., 11, eadq8719[6] L. Prockter et al. (2002), J. Geophys. Res. Planets,...
- 2 July 2026
- Published by Copernicus GmbH
Open AccessCracking Europa: Dilational bands formation and material transport in the ice shell
IntroductionWith its geologically young surface crosscut by linear structures such as ridges, lineae, and bands, Europa is a unique moon in our Solar System. It has been explored by multiple spacecraft, in particular the Galileo mission, which inferred the existence of a subsurface salty ocean, as well as the presence of surface salts, likely MgSO4 [1]. The Hubble Space Telescope also identified irradiated NaCl, which is consistent with the reddish color of Europa [2]. Their distribution across the surface coincides with geological structures, suggesting an internal origin and exchange of non-ice material (NIM) with its interior [1]. Europa undergoes periodic eccentricity variations over cycles of hundreds of million years [3], leading to global compression and extension [4,5]. As a result, the ice shell exhibits significant thickness variations, ranging from ~3-10 km to ~60-70 km [3,4,5].Unraveling the formation of dilational bands is a key to a better understanding of Europa's history. These wide bands, extending for hundreds of kilometers across its surface, are characterized by a complete opening of the surface with exposure of subsurface material in the fault zone. Their morphology suggests an extensional origin, and they likely form during the thickening of the ice shell [6,7]. Most of them spread from a V-shaped central trough, are roughly symmetrical, and often elevated with respect to surrounding terrains [6,7,8]. They exhibit a moderate topography of a few hundred meters [6,8,9] and are commonly classified into four main categories, depending on their brightness and texture [7]. Dark bands are the most common and are inferred to be richer in non-ice materials (NIM) and younger than bright bands [6,9]. Bright bands, on the contrary, are usually older, and often flanked by darker material [6,7,8]. Smooth bands have a hummocky texture with small-amplitude oscillations [7,8], while lineated bands consist of regularly spaced sub-parallel ridges and faults, spreading symmetrically from the central depression [6,7,8].We aim to unravel the conditions under which these bands are formed. We investigate the effect of various parameters, such as the ice shell thickness D, extension velocity Vext, ice cohesion Cice, and grain size, on band morphology and topography, using a two-dimensional Cartesian model of the ice shell undergoing a constant strain-rate tectonic extension. We also seek to investigate how tectonic extension drives transport of NIM and oceanic material to the surface, as well as their distribution.ResultsSeveral parameters significantly affect the formation of dilational bands, particularly Vext and D. We identify three main dynamical regimes, controlled by the efficiency of surface opening (Fig.1). Complete surface opening occurs only for sufficiently high strain rates, on the order of 10 km.Myr−1, and is further enhanced for thinner ice shells. The third regime is therefore the most consistent with dilational band formation (Fig.1).Efficient surface opening also promotes mass exchanges, with higher strain rates favoring the exposure of oceanic material at the surface. Thinner ice shells further enhance the exposure of oceanic material within the fault zone (Fig.2B). In these cases, NIM are pushed away from the fault zone. One important result is that the final lateral distribution across the band reflects the initial vertical distribution of material within the ice shell.Another key parameter is Cice, which controls the strength of the lithosphere. Fig.2 illustrates the effect of Cice on band formation for two different ice shell thicknesses. Tectonic extension commonly drives local convection within the ice shell, enhancing mass exchanges with the surface (Fig.2A). The strength of the lithosphere strongly affects band morphology, particularly the symmetry of the structure and the presence of a distinct central trough (Fig.2).ConclusionWe suggest that various types of bands were formed during distinct extensional events, explaining their brightness and texture differences. In particular, bright bands may form at an early stage of ice shell thickening when a thinner ice shell promotes the exposure of oceanic material within the fault zone. This provides a consistent explanation for their bright central region and often darker edges enriched in NIM. These darker edges may also result from a longer radiation exposure. In most cases, the farther from the center of the domain, the longer the material has remained at the surface, exposed to radiation (Fig.2C). In contrast, dark bands may form later, when the ice shell is thicker, limiting the exposure of oceanic material and resulting in a higher fraction of NIM within the fault zone. Finally, we are able to predict the morphology and composition of the dilational bands based on the rheological and physical properties of the ice shell at the time of extension. We show that we can also constrain the initial vertical profile in the ice shell from the vertical distribution of material across the band.Figure 1 - Effect of D and Vext on the final distribution of initial near-surface material and exposure of oceanic material.Figure 2 - Effect of Cice and D on: A. the viscosity field at the end of the extension, and B. the initial depth of the post-extension near-surface material. Grey part corresponds to what remains of the initial near-surface material. C. Comparative plots for two values of Cice: average time spent in the topmost cell by post-extension near-surface material, and fraction of NIM at the surface at the end of the extension. References[1] R. Carlson et al. (2009), In Europa, eds. R. T. Pappalardo et al., 283–327[2] S. K. Trumbo et al. (2019), Sci. Adv., 5, eaaw7123[3] H. Hussmann and T. Spohn (2004), Icarus, 171, 391-410[4] M. L. Rudolph et al. (2022), Geophys. Res. Lett., 49(5), e2021GL094421[5] M. Kihoulou et al. (2025), Sci. Adv., 11, eadq8719[6] L. Prockter et al. (2002), J. Geophys. Res. Planets,...
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Interior models imply the presence of carbon inside Io and Europa
The Galilean moons of Jupiter have been of great interest over the past years and are the targets of the JUICE and Europa Clipper missions. Europa is an ocean world that may potentially be suitable for hosting life, while Io is the most volcanically active world of the solar system. Despite their apparent differences, Europa and Io are expected to have accreted in a similar environment in the circumjovian disk [1]. Determining the interior structure, chemical composition and thermal evolution of Europa and Io is crucial to understanding the origin and the history of the Jovian system and assess the habitability of Europa’s subsurface ocean. In previous studies, the low bulk density of icy moons and dwarf planets was classically associated with low Fe/Si ratios [2], [3], [4]. More recent studies motivated by space mission observations suggested that carbonaceous organic matter (COM) may be present in significant amounts in most planetary objects of the outer solar system [5], [6]. Carbonaceous matter in the rocky interior could indeed decrease the mean bulk density and thus explain the values observed for Io and Europa. The presence of COM within these bodies may have considerable implications on their bulk composition, internal structure and their thermo-chemical evolution.In this study, the interior structure and composition of Io and Europa are modeled through a joint analysis using a MCMC scheme constrained on the mass, radius and Moment-of-Inertia factor retrieved during the Galileo mission [7], [8]. Density profiles are calculated using state-of-the-art equations of state for a large range of Fe/Si and Mg/Si ratios. We show that Io and Europa can have Fe/Si and Mg/Si ratios comparable to the solar composition only if a low-density component here taken as graphite is considered. The graphite content in Io's and Europa's refractory interior is estimated between 3-8 wt% and 1-22 wt%, respectively, which can exceed up to a factor five the typical carbon content in carbonaceous chondrites. The amount of graphite within Europa is anti-correlated with the thickness of the hydrosphere and positively correlated with the radius of the inner metallic core. A hydrosphere thickness larger than ~125 km would suggest an undifferentiated rocky core with low carbon fractions while a thinner hydrosphere (
- 2 July 2026
- Published by Copernicus GmbH
Open AccessInterior models imply the presence of carbon inside Io and Europa
The Galilean moons of Jupiter have been of great interest over the past years and are the targets of the JUICE and Europa Clipper missions. Europa is an ocean world that may potentially be suitable for hosting life, while Io is the most volcanically active world of the solar system. Despite their apparent differences, Europa and Io are expected to have accreted in a similar environment in the circumjovian disk [1]. Determining the interior structure, chemical composition and thermal evolution of Europa and Io is crucial to understanding the origin and the history of the Jovian system and assess the habitability of Europa’s subsurface ocean. In previous studies, the low bulk density of icy moons and dwarf planets was classically associated with low Fe/Si ratios [2], [3], [4]. More recent studies motivated by space mission observations suggested that carbonaceous organic matter (COM) may be present in significant amounts in most planetary objects of the outer solar system [5], [6]. Carbonaceous matter in the rocky interior could indeed decrease the mean bulk density and thus explain the values observed for Io and Europa. The presence of COM within these bodies may have considerable implications on their bulk composition, internal structure and their thermo-chemical evolution.In this study, the interior structure and composition of Io and Europa are modeled through a joint analysis using a MCMC scheme constrained on the mass, radius and Moment-of-Inertia factor retrieved during the Galileo mission [7], [8]. Density profiles are calculated using state-of-the-art equations of state for a large range of Fe/Si and Mg/Si ratios. We show that Io and Europa can have Fe/Si and Mg/Si ratios comparable to the solar composition only if a low-density component here taken as graphite is considered. The graphite content in Io's and Europa's refractory interior is estimated between 3-8 wt% and 1-22 wt%, respectively, which can exceed up to a factor five the typical carbon content in carbonaceous chondrites. The amount of graphite within Europa is anti-correlated with the thickness of the hydrosphere and positively correlated with the radius of the inner metallic core. A hydrosphere thickness larger than ~125 km would suggest an undifferentiated rocky core with low carbon fractions while a thinner hydrosphere (
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
New constraints on the composition and physical properties of the icy surface on Enceladus’ South Polar Terrain
The observation of active jets of ice grains and vapour emanating from four warm faults (called Tiger Stripes) at Enceladus’s South Pole was one of the major discoveries of the Cassini-Huygens mission (Porco et al. 2006, Spencer et al. 2006, Waite et al. 2006, Spahn et al. 2006). Infrared mapping carried out by the Visual and Infrared Imaging Spectrometer (VIMS) on board the Cassini spacecraft provided information on surface composition, but also on the physical state (grain size and degree of crystallinity) near active faults (Brown et al. 2006, Jaumann et al., 2008; Taffin et al., 2012; Filacchione et al., 2016, Combes et al. 2018, Robidel et al. 2020). However, many spectral characteristics were not fully exploited by previous studies. Here, by acquiring laboratory infrared spectra of ice powder analogues, we identified several salt compounds, and potentially CO2 clathrate, at the surface, and with a higher concentration along active faults. Our analysis shows that the spectral signatures in the inter-stripe regions are consistent with fresh, cold, fine-grained ice deposits, while ice near the tiger stripes has been thermally processed. The higher concentration of salts observed along the tiger stripes, as well as the main spectral features of water ice, imply significant sublimation and sintering processes in the vicinity of active jet sources. These new results provide essential constraints for identifying the best landing site for a future mission to Enceladus and for anticipating the mechanical properties of the icy regolith.
- 2 July 2026
- Published by Copernicus GmbH
Open AccessNew constraints on the composition and physical properties of the icy surface on Enceladus’ South Polar Terrain
The observation of active jets of ice grains and vapour emanating from four warm faults (called Tiger Stripes) at Enceladus’s South Pole was one of the major discoveries of the Cassini-Huygens mission (Porco et al. 2006, Spencer et al. 2006, Waite et al. 2006, Spahn et al. 2006). Infrared mapping carried out by the Visual and Infrared Imaging Spectrometer (VIMS) on board the Cassini spacecraft provided information on surface composition, but also on the physical state (grain size and degree of crystallinity) near active faults (Brown et al. 2006, Jaumann et al., 2008; Taffin et al., 2012; Filacchione et al., 2016, Combes et al. 2018, Robidel et al. 2020). However, many spectral characteristics were not fully exploited by previous studies. Here, by acquiring laboratory infrared spectra of ice powder analogues, we identified several salt compounds, and potentially CO2 clathrate, at the surface, and with a higher concentration along active faults. Our analysis shows that the spectral signatures in the inter-stripe regions are consistent with fresh, cold, fine-grained ice deposits, while ice near the tiger stripes has been thermally processed. The higher concentration of salts observed along the tiger stripes, as well as the main spectral features of water ice, imply significant sublimation and sintering processes in the vicinity of active jet sources. These new results provide essential constraints for identifying the best landing site for a future mission to Enceladus and for anticipating the mechanical properties of the icy regolith.
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Could CH4 clathrates have formed in the subsurface of Gale Crater?
In situ measurements of atmospheric CH₄ taken by the Curiosity rover in Gale Crater revealed strong seasonal variations in background gas levels (Webster et al. 2018, 2021). Endogenous CH₄ could have been stored in the past in subsurface reservoirs in the form of clathrate hydrates (Prieto-Ballesteros et al. 2006; Chastain and Chevrier 2007; Oehler and Etiope 2017), and remain partially stable in the present-day cryosphere (Gloesener et al. 2021).The stability of clathrates—including their thermodynamic properties and their formation-dissociation kinetics—depends not only on pressure and temperature conditions, but also on the presence of other compounds with which they coexist to form a mineral association, and with which they could interact physically and chemically. Thus, in this research we have reviewed the mineralogy of the Gale Crater subsurface—i.e., the region where clathrates could coexist with other mineral phases—in order to study the stability of CH4 clathrates in such associations.Data from missions to that region suggest that Gale Crater may once have been home to an ancient lake. The crater formed between the late Noachian and early Hesperian periods, while the subsequent formation of the sedimentary strata (composed of clay minerals and sulfate layers) occurred during the Hesperian period (Thomson et al. 2011; Palucis et al. 2014; Grant et al. 2014; Grotzinger et al. 2015). Furthermore, a wide variety of sedimentary layers have been revealed on Mount Sharp that record multiple episodes of ancient aqueous alteration processes (e.g., Achilles et al. 2020), including groundwater activity (Thorpe et al. 2022). In particular, a coexistence of clay minerals and sulfates was found in large quantities in several drill samples collected in the Murray Formation (Bristow et al. 2018) and in the Glen Torridon area (Thorpe et al. 2022).Based on these premises, we experimentally studied the kinetics of CH₄ clathrate formation and dissociation, at pressures up to 100 bar, in the presence of MgSO₄ brines and two clay minerals—a montmorillonite (2:1 type) and a kaolinite (1:1 type)—using high-pressure differential scanning calorimetry (DSC). The results showed that the presence of both sulfates and clay minerals can favor the induction time of clathrate formation, but considerably reduces the final stabilized amount. The salting-out effect caused by the salts and the water strongly bound to the clay surfaces are the main factors that inhibit clathrate growth. These results have important implications for the assessment of potential CH₄ sources in Gale, as the experiments demonstrate the inhibition of clathrate formation within the mineral assemblages found in the crater.References: Achilles et al. 2020, J. Geophys. Res. Planets, 125, e2019JE006295; Bristow et al. 2018, Sci. Adv., 4, eaar3330; Chastain and Chevrier 2007, Planet. Space Sci., 55, 1246 ; Gloesener et al. 2021, Icarus, 353, 114099 ; Grant et al. 2014, Geophys. Res. Lett., 41, 1142 ; Grotzinger et al. 2015, Science, 350, aac7575 ; Oehler and Etiope 2017, Astrobiology, 17, 1233 ; Palucis et al. 2014, J. Geophys. Res. Planets, 119, 705 ; Prieto-Ballesteros et al. 2006, Geology, 34, 149 ; Thomson et al. 2011, Icarus, 214, 413 ; Thorpe et al. 2022, J. Geophys. Res. Planets, 127, e2021JE007099 ; Webster et al. 2018, Science, 360, 1093 ; Webster et al. 2021, A&A, 650, A166Acknowledgements: The authors acknowledge support from the MCIN/AEI/ http://doi.org/10.13039/501100011033 projects PID2022-142490OB-C31, and PCI2023-145992-2, the SOS-Mars project (PID2020-119412RJ-I00) from MICINN Spain, the Marie Curie Postdoctoral Fellowship program (HORIZON-MSCA-2022-PF-01), grant nº 101105979 – SECRECY; and the RYC2024-050522-I grant, funded by MICIU/AEI/10.13039/501100011033 and the ESF+. Part of this work has been conducted at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.
- 2 July 2026
- Published by Copernicus GmbH
Open AccessCould CH4 clathrates have formed in the subsurface of Gale Crater?
In situ measurements of atmospheric CH₄ taken by the Curiosity rover in Gale Crater revealed strong seasonal variations in background gas levels (Webster et al. 2018, 2021). Endogenous CH₄ could have been stored in the past in subsurface reservoirs in the form of clathrate hydrates (Prieto-Ballesteros et al. 2006; Chastain and Chevrier 2007; Oehler and Etiope 2017), and remain partially stable in the present-day cryosphere (Gloesener et al. 2021).The stability of clathrates—including their thermodynamic properties and their formation-dissociation kinetics—depends not only on pressure and temperature conditions, but also on the presence of other compounds with which they coexist to form a mineral association, and with which they could interact physically and chemically. Thus, in this research we have reviewed the mineralogy of the Gale Crater subsurface—i.e., the region where clathrates could coexist with other mineral phases—in order to study the stability of CH4 clathrates in such associations.Data from missions to that region suggest that Gale Crater may once have been home to an ancient lake. The crater formed between the late Noachian and early Hesperian periods, while the subsequent formation of the sedimentary strata (composed of clay minerals and sulfate layers) occurred during the Hesperian period (Thomson et al. 2011; Palucis et al. 2014; Grant et al. 2014; Grotzinger et al. 2015). Furthermore, a wide variety of sedimentary layers have been revealed on Mount Sharp that record multiple episodes of ancient aqueous alteration processes (e.g., Achilles et al. 2020), including groundwater activity (Thorpe et al. 2022). In particular, a coexistence of clay minerals and sulfates was found in large quantities in several drill samples collected in the Murray Formation (Bristow et al. 2018) and in the Glen Torridon area (Thorpe et al. 2022).Based on these premises, we experimentally studied the kinetics of CH₄ clathrate formation and dissociation, at pressures up to 100 bar, in the presence of MgSO₄ brines and two clay minerals—a montmorillonite (2:1 type) and a kaolinite (1:1 type)—using high-pressure differential scanning calorimetry (DSC). The results showed that the presence of both sulfates and clay minerals can favor the induction time of clathrate formation, but considerably reduces the final stabilized amount. The salting-out effect caused by the salts and the water strongly bound to the clay surfaces are the main factors that inhibit clathrate growth. These results have important implications for the assessment of potential CH₄ sources in Gale, as the experiments demonstrate the inhibition of clathrate formation within the mineral assemblages found in the crater.References: Achilles et al. 2020, J. Geophys. Res. Planets, 125, e2019JE006295; Bristow et al. 2018, Sci. Adv., 4, eaar3330; Chastain and Chevrier 2007, Planet. Space Sci., 55, 1246 ; Gloesener et al. 2021, Icarus, 353, 114099 ; Grant et al. 2014, Geophys. Res. Lett., 41, 1142 ; Grotzinger et al. 2015, Science, 350, aac7575 ; Oehler and Etiope 2017, Astrobiology, 17, 1233 ; Palucis et al. 2014, J. Geophys. Res. Planets, 119, 705 ; Prieto-Ballesteros et al. 2006, Geology, 34, 149 ; Thomson et al. 2011, Icarus, 214, 413 ; Thorpe et al. 2022, J. Geophys. Res. Planets, 127, e2021JE007099 ; Webster et al. 2018, Science, 360, 1093 ; Webster et al. 2021, A&A, 650, A166Acknowledgements: The authors acknowledge support from the MCIN/AEI/ http://doi.org/10.13039/501100011033 projects PID2022-142490OB-C31, and PCI2023-145992-2, the SOS-Mars project (PID2020-119412RJ-I00) from MICINN Spain, the Marie Curie Postdoctoral Fellowship program (HORIZON-MSCA-2022-PF-01), grant nº 101105979 – SECRECY; and the RYC2024-050522-I grant, funded by MICIU/AEI/10.13039/501100011033 and the ESF+. Part of this work has been conducted at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration.
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Influence of topography on atmospheric thermal tides and rotational evolution of Venus
With a period of 243 days, Venus’ rotation is the slowest of all the planets in the solar system and is in the retrograde direction. Such a rotational state results directly from several tidal effects that impact both the atmosphere and the solid part of the planet. Therefore, to fully characterize the rotational dynamic and evolution of Venus, it is mandatory to have a comprehensive understanding of the factors that influence the different tidal effects controlling the rotation (Dobrovolskis et Ingersoll, 1980; Correia et Laskar, 2003; Revol et al., 2023, Musseau et al., 2024), and particularly the atmospheric thermal tides.Topography is known to play a crucial role in modulating surface pressures and temperatures, as well as influencing atmospheric circulation, and is therefore also expected to influence the amplitude and temporal variability of atmospheric thermal tides. This aspect is particularly relevant for studies of the evolution of Venus' rotation because the topography may have changed significantly over a short geological timescale (< 1 Gyr) through resurfacing events or true polar wander (TPW). Using the Venus Planetary Climate Model (Lebonnois et al., 2016), we investigated how the distribution of the topography affects the atmospheric thermal tides and, consequently, the rotational state of the planet. Because the past topography of Venus is unknown, we focused our study on the effect of a true polar wander acting on the present-day topography. In this framework, the current topography is preserved, but its position relative to the rotation axis is modified. This approach allows us to isolate the effect of large-scale reorientation without introducing speculative topographies.This work reveals the link between topography and thermal tides, showing that the variations of the atmospheric thermal torque over a solar day are mainly controlled by the near-equatorial large-scale topography. Moreover, we show that changes in the topography not only introduce strong diurnal variations in the torque but also change its daily average value and impact the overall balance between tides. Therefore, these results show that topographic distribution is a key element in the study of the rotational state of the planet. In addition, we update the empirical law that links atmospheric thermal torque to the forcing frequency from Leconte et al. (2015) and show that the presence of topography affects this relationship and may have influenced Venus' rotational evolution.These results highlight that the present-day rotation of Venus is likely the outcome of a complex interplay between internal and external interactions. A comprehensive understanding of the rotational history of planets and exoplanets therefore requires better constraints on the coupling between internal dynamics, surface properties, and atmospheric processes, as well as their combined influence on tides. Therefore, this study brings out the necessity to precisely model the dynamics of atmospheric thermal tides and to include all the elements that can affect them. In addition, our results highlight the crucial importance of understanding how Venus' topography has evolved throughout the planet's history, which, in turn, is directly related to the planet's resurfacing history, tectonics, and surface rock composition. For this purpose, the upcoming mission EnVision (ESA) aims, in part, to improve our knowledge of the atmosphere, the surface, and the internal properties of Venus and better constrain the different tidal effects.References:Correia, A. C. et J. Laskar (2003). “Different Tidal Torques on a Planet with a Dense Atmosphere and Consequences to the Spin Dynamics”. Journal of Geophysical Research: Planets 108(E11), 2003JE002059.Dobrovolskis, A. R. et A. P. Ingersoll (1980). “Atmospheric Tides and the Rotation of Venus I. Tidal Theory and the Balance of Torques”. Icarus 41(1), 1–17.Lebonnois, S., N. Sugimoto et G. Gilli (2016). “Wave Analysis in the Atmosphere of Venus below 100-Km Altitude, Simulated by the LMD Venus GCM”. Icarus 278, 38–51.Leconte, J., H. Wu, K. Menou et N. Murray (2015). “Asynchronous Rotation of Earth-mass Planets in the Habitable Zone of Lower-Mass Stars”. Science 347(6222), 632–635.Musseau, Y., Tobie, G., Dumoulin, C., Gillmann, Revol, A., Bolmont, E. (2024). “The viscosity of Venus’ mantle inferred from its rotational state”. Icarus, 422, 116245Revol, A., E. Bolmont, G. Tobie, C. Dumoulin, Y. Musseau, S. Mathis, A. Strugarek et A. Brun (2023). “Spin Evolution of Venus-like Planets Subjected to Gravitational and Thermal Tides”. Astronomy & Astrophysics
- 2 July 2026
- Published by Copernicus GmbH
Open AccessInfluence of topography on atmospheric thermal tides and rotational evolution of Venus
With a period of 243 days, Venus’ rotation is the slowest of all the planets in the solar system and is in the retrograde direction. Such a rotational state results directly from several tidal effects that impact both the atmosphere and the solid part of the planet. Therefore, to fully characterize the rotational dynamic and evolution of Venus, it is mandatory to have a comprehensive understanding of the factors that influence the different tidal effects controlling the rotation (Dobrovolskis et Ingersoll, 1980; Correia et Laskar, 2003; Revol et al., 2023, Musseau et al., 2024), and particularly the atmospheric thermal tides.Topography is known to play a crucial role in modulating surface pressures and temperatures, as well as influencing atmospheric circulation, and is therefore also expected to influence the amplitude and temporal variability of atmospheric thermal tides. This aspect is particularly relevant for studies of the evolution of Venus' rotation because the topography may have changed significantly over a short geological timescale (< 1 Gyr) through resurfacing events or true polar wander (TPW). Using the Venus Planetary Climate Model (Lebonnois et al., 2016), we investigated how the distribution of the topography affects the atmospheric thermal tides and, consequently, the rotational state of the planet. Because the past topography of Venus is unknown, we focused our study on the effect of a true polar wander acting on the present-day topography. In this framework, the current topography is preserved, but its position relative to the rotation axis is modified. This approach allows us to isolate the effect of large-scale reorientation without introducing speculative topographies.This work reveals the link between topography and thermal tides, showing that the variations of the atmospheric thermal torque over a solar day are mainly controlled by the near-equatorial large-scale topography. Moreover, we show that changes in the topography not only introduce strong diurnal variations in the torque but also change its daily average value and impact the overall balance between tides. Therefore, these results show that topographic distribution is a key element in the study of the rotational state of the planet. In addition, we update the empirical law that links atmospheric thermal torque to the forcing frequency from Leconte et al. (2015) and show that the presence of topography affects this relationship and may have influenced Venus' rotational evolution.These results highlight that the present-day rotation of Venus is likely the outcome of a complex interplay between internal and external interactions. A comprehensive understanding of the rotational history of planets and exoplanets therefore requires better constraints on the coupling between internal dynamics, surface properties, and atmospheric processes, as well as their combined influence on tides. Therefore, this study brings out the necessity to precisely model the dynamics of atmospheric thermal tides and to include all the elements that can affect them. In addition, our results highlight the crucial importance of understanding how Venus' topography has evolved throughout the planet's history, which, in turn, is directly related to the planet's resurfacing history, tectonics, and surface rock composition. For this purpose, the upcoming mission EnVision (ESA) aims, in part, to improve our knowledge of the atmosphere, the surface, and the internal properties of Venus and better constrain the different tidal effects.References:Correia, A. C. et J. Laskar (2003). “Different Tidal Torques on a Planet with a Dense Atmosphere and Consequences to the Spin Dynamics”. Journal of Geophysical Research: Planets 108(E11), 2003JE002059.Dobrovolskis, A. R. et A. P. Ingersoll (1980). “Atmospheric Tides and the Rotation of Venus I. Tidal Theory and the Balance of Torques”. Icarus 41(1), 1–17.Lebonnois, S., N. Sugimoto et G. Gilli (2016). “Wave Analysis in the Atmosphere of Venus below 100-Km Altitude, Simulated by the LMD Venus GCM”. Icarus 278, 38–51.Leconte, J., H. Wu, K. Menou et N. Murray (2015). “Asynchronous Rotation of Earth-mass Planets in the Habitable Zone of Lower-Mass Stars”. Science 347(6222), 632–635.Musseau, Y., Tobie, G., Dumoulin, C., Gillmann, Revol, A., Bolmont, E. (2024). “The viscosity of Venus’ mantle inferred from its rotational state”. Icarus, 422, 116245Revol, A., E. Bolmont, G. Tobie, C. Dumoulin, Y. Musseau, S. Mathis, A. Strugarek et A. Brun (2023). “Spin Evolution of Venus-like Planets Subjected to Gravitational and Thermal Tides”. Astronomy & Astrophysics
- Open Access
- 2 July 2026
- Published by Copernicus GmbH
Geophysical characterization of Venus' large topographic rises
Despite similarities in size and density, to Earth, Venus followed a very different evolutionary path, becoming warm and dry planet dominated by volcanic activity. While a series of new planetary missions (EnVision, Veritas, DaVinci) is preparing, it is necessary to develop new numerical tools and approaches allowing connecting the volcanic activity to the mantle dynamics and geophysical signatures. The surface of Venus features a number of uplifted areas that are believed to be active manifestations of mantle plumes, perhaps analogous to Earth's hotspots or flood basalts (Smrekar and Parmentier, 1996). During the wave of numerical investigations of Venus in the 90s, Stofan et al. (1995) identified nine such large topographic rises (LTR). LTRs are defined by a pronounced, up to 2500 km wide, topographic bulge, associated volcanism and positive gravity, and some geophysical characteristics are provided by the study. However, their methodological approach is not easily reproducible, and cannot be applied to numerical models on a large scale. Consequently, we find ourselves in the need of a postprocessing algorithm that would provide geophysical characterization of these features. This approach needs to be fairly simple, but robust and reproducible. Furthermore, the approach needs to be easily applicable to both the observations, as well as numerical simulation outputs. Our approach consists of three steps: detection of features similar to LTRs, their classification, and their geophysical characterization. First, we use the topography of Venus to detect isolated topographic bulges of extents between 1000 km and 2500 km. Then, we classify all detected features based on their uncorrelated gravity (Simons et al., 1997) and tectonic units present at their location (Ivanov et al., 2011). Finally, we outline the expected borders of their topographic and gravity signals, correct the data for the effects of the surrounding features, and compute their main geophysical characteristics. These characteristics include the total topographic volume, topography profiles, average topography, gravity profiles, and average gravity. Preliminary global analysis of Venus' surface using our algorithm reveals a set of 30 LTRs which are then classified into 7 categories. Our set includes all LTRs mentioned by Stofan et al. (1995); however, we systematically predict slightly larger volumes of the features. Furthermore, we provide a comparison with regional geomorphological studies, where available. References:Ivanov et al., 2011, DOI: 10.1016/j.pss.2011.07.008Simons et al., 1997, DOI: 10.1111/j.1365-246X.1997.tb00593.xSmrekar and Parmentier, 1996, DOI: 10.1029/95JB02877Stofan et al., 1995, DOI: 10.1029/95JE01834
- 2 July 2026
- Published by Copernicus GmbH
Open AccessGeophysical characterization of Venus' large topographic rises
Despite similarities in size and density, to Earth, Venus followed a very different evolutionary path, becoming warm and dry planet dominated by volcanic activity. While a series of new planetary missions (EnVision, Veritas, DaVinci) is preparing, it is necessary to develop new numerical tools and approaches allowing connecting the volcanic activity to the mantle dynamics and geophysical signatures. The surface of Venus features a number of uplifted areas that are believed to be active manifestations of mantle plumes, perhaps analogous to Earth's hotspots or flood basalts (Smrekar and Parmentier, 1996). During the wave of numerical investigations of Venus in the 90s, Stofan et al. (1995) identified nine such large topographic rises (LTR). LTRs are defined by a pronounced, up to 2500 km wide, topographic bulge, associated volcanism and positive gravity, and some geophysical characteristics are provided by the study. However, their methodological approach is not easily reproducible, and cannot be applied to numerical models on a large scale. Consequently, we find ourselves in the need of a postprocessing algorithm that would provide geophysical characterization of these features. This approach needs to be fairly simple, but robust and reproducible. Furthermore, the approach needs to be easily applicable to both the observations, as well as numerical simulation outputs. Our approach consists of three steps: detection of features similar to LTRs, their classification, and their geophysical characterization. First, we use the topography of Venus to detect isolated topographic bulges of extents between 1000 km and 2500 km. Then, we classify all detected features based on their uncorrelated gravity (Simons et al., 1997) and tectonic units present at their location (Ivanov et al., 2011). Finally, we outline the expected borders of their topographic and gravity signals, correct the data for the effects of the surrounding features, and compute their main geophysical characteristics. These characteristics include the total topographic volume, topography profiles, average topography, gravity profiles, and average gravity. Preliminary global analysis of Venus' surface using our algorithm reveals a set of 30 LTRs which are then classified into 7 categories. Our set includes all LTRs mentioned by Stofan et al. (1995); however, we systematically predict slightly larger volumes of the features. Furthermore, we provide a comparison with regional geomorphological studies, where available. References:Ivanov et al., 2011, DOI: 10.1016/j.pss.2011.07.008Simons et al., 1997, DOI: 10.1111/j.1365-246X.1997.tb00593.xSmrekar and Parmentier, 1996, DOI: 10.1029/95JB02877Stofan et al., 1995, DOI: 10.1029/95JE01834